Photoelectrochemical Cells with a Pyridine-Anchored Bilayer Photoanode for Water Splitting.

A dye-sensitized photoanode is prepared by coassembling a Ru complex photosensitizer and a Ru water oxidation catalyst (WOC) on a TiO2 substrate, in which the WOC molecules are immobilized in a layer-by-layer fashion through metal-pyridine coordination with the aid of a bifunctional anchoring and bridging molecule containing multiple pyridine groups. Under visible-light irradiation, an anodic photocurrent of around 200 µA/cm2 has been achieved with O2 and H2 being generated at the photoanode and Pt counter electrode, respectively. The pyridine anchoring strategy provides a simple method to prepare photoelectrodes for applications in photoelectrochemical cells.

A Multi-Pyridine-Anchored and -Linked Bilayer Photocathode for Water Reduction.

The development of efficient photocathodes is of critical importance for the constructions of promising tandem photo-electrochemical cells. Most known dye-sensitized photocathodes are prepared with the conventional carboxylic or phosphonic acid anchors and require the presence of other terminal linking groups to connect catalysts; they suffer from high synthetic difficulty and low adsorption stability in aqueous media. Here, a compact bilayer photocathode has been prepared by using a pyrene-based photosensitizer with multiple terminal pyridine moieties as both the anchoring and linking groups to connect a Co hydrogen-evolution catalyst to the NiO substrate. The catalyst and dye molecule are assembled in a layer-by-layer manner on NiO through the metal-pyridine coordination. This photocathode exhibits good dye adsorption stability in aqueous media. A stable cathodic photocurrent of 70 µA cm-2 was achieved, with H2 being generated at the photocathode under the visible-light irradiation. The Faraday efficiency of H2 evolution was estimated to be 9.1 %. Transient absorption spectral studies suggest that the interfacial hole transfer occurs within a few picoseconds. The integration of the organic photosensitizer with pyridine anchoring and linking groups is expected to provide a simple method for the fabrication of stable and efficient photocathodes.

Electrically Amplified Circularly Polarized Luminescence by a Chiral Anion Strategy.

The development of circularly polarized electroluminescence (CPEL) is currently hampered by the high difficulty and cost in the syntheses of suitable chiral materials and the notorious chirality diminishment issue in electrical devices. Herein, diastereomeric IrIII and RuII complexes with chiral (±)-camphorsulfonate counteranions are readily synthesized and used as the active materials in circularly polarized light-emitting electrochemical cells to generate promising CPELs. The addition of the chiral ionic liquid (±)-1-butyl-3-methylimidazole camphorsulfonate into the active layer significantly improves the device performance and the electroluminescence dissymmetry factors (≈10-3 ), in stark contrast to the very weak circularly polarized photoluminescence of the spin-coated films of these diastereomeric complexes. Control experiments with enantiopure IrIII complexes suggest that the chiral anions play a dominant role in the electrically-induced amplification of CPELs.

Selective, Anisotropic, or Consistent Polarized-Photon Out-Coupling of 2D Organic Microcrystals.

Nano- and micromaterials with anisotropic photoluminescence and photon transport have widespread application prospects in quantum optics, optoelectronics, and displays. But the nature of the polarization information of the out-coupled light, with respect to that of the source luminescence, has never been explored in active optical-waveguiding organic crystals. Herein, three different modes (selective, anisotropic, and consistent) of polarized-photon out-coupling are proposed and successfully implemented in a set of 2D organic microcrystals with highly linearly-polarized luminescence. It is found that the polarization direction and degree of the luminescence out-coupled through different waveguiding channels can either be essentially retained or distinctly changed with respect to those of the original luminescence, depending on the molecular arrangement and the orientation of transition dipole moments of the crystal. This work demonstrates the promising potential of 2D emissive microcrystals in multi-channel polarized photon transport.

Dual-Emissive Tris-Heteroleptic Ruthenium Complexes: Tuning the DNA-Triggered Ratiometric Emission Response by Ancillary Ligands.

Three tris-heteroleptic mononuclear Ru(II) complexes with dual fluorescence and phosphorescence-[Ru(dpma)(bpy)(phen)]2+ (12+), [Ru(dpma)(bpy)(dppz)]2+ (22+), and [Ru(dpma)(phen)(dppz)]2+ (32+)-have been designed and used as ratiometric light-response probes for DNA, where dpma is di(pyrid-2-yl)(methyl)-amine, bpy is 2,2'-bipyridine, phen is 1,10-phenanthroline, and dppz is dipyridophenazine, respectively. Single crystals of complex 2(PF6)2 have been obtained and studied by X-ray analysis. The interactions of these complexes with different DNAs are investigated by means of spectroscopic methods, viscosity measurements, and molecular modeling. In the presence of calf thymus DNA, complexes 2(PF6)2 and 3(PF6)2 show the emergence of a new lower-energy phosphorescence emission band; meanwhile, the higher-energy fluorescence emission band is essentially unchanged, functioning as an intrinsic internal reference. These two complexes exhibit stronger preference for calf thymus DNA over single-strand DNA (d(A)16 and d(C)16). In contrast, no binding interaction between 1(PF6)2 and calf thymus DNA is observed. The intrinsic binding constants (Kb) of 2(PF6)2 and 3(PF6)2 with calf thymus DNA are determined to be (1.4 ± 0.4) × 105 and (9.5 ± 0.15) × 104 M-1, respectively. In addition, these spectroscopic results are compared with those of the prototype complex [Ru(bpy)2(dppz)]2+ (42+), and density functional theory and time-dependent density functional theory calculations are employed to elucidate these experimental findings.

Full-Color and White Circularly Polarized Luminescence of Hydrogen-Bonded Ionic Organic Microcrystals.

A simple and general method is presented herein for the in situ preparations of circularly polarized luminescence (CPL)-active microcrystals with a large luminescence dissymmetry factor glum , high fluorescence quantum efficiency (ΦFL ), wide emission color tenability, and well-ordered morphology. The reactions of pyridine-containing achiral molecules 1-7 with chiral camphor sulfonic acid ((±)-CSA) gave crystalline microplates formed by hydrogen bonding interactions between the protonated pyridinium units and the sulfonic anions. The chiral information of CSA are effectively transferred to the microcrystals by hydrogen bonding to afford full-color CPL from deep-blue to red with glum in the order of 10-2 and ΦFL up to 80 %. Moreover, organic microcrystals with high-performance white CPL (ΦFL =46 %; |glum |=0.025) are achieved via the light-harvesting energy transfer between blue and yellow emitters.

Electrical Loss Management by Molecularly Manipulating Dopant-free Poly(3-hexylthiophene) towards 16.93 % CsPbI2 Br Solar Cells.

Inorganic cesium lead halide perovskites offer a pathway towards thermally stable photovoltaics. However, moisture-induced phase degradation restricts the application of hole transport layers (HTLs) with hygroscopic dopants. Dopant-free HTLs fail to realize efficient photovoltaics due to severe electrical loss. Herein, we developed an electrical loss management strategy by manipulating poly(3-hexylthiophene) with a small molecule, i.e., SMe-TATPyr. The developed P3HT/SMe-TATPyr HTL shows a three-time increase of carrier mobility owing to breaking the long-range ordering of "edge-on" P3HT and inducing the formation of "face-on" clusters, over 50 % decrease of the perovskite surface defect density, and a reduced voltage loss at the perovskite/HTL interface because of favorable energy level alignment. The CsPbI2 Br perovskite solar cell demonstrates a record-high efficiency of 16.93 % for dopant-free HTL, and superior moisture and thermal stability by maintaining 96 % efficiency at low-humidity condition (10-25 % R. H.) for 1500 hours and over 95 % efficiency after annealing at 85 °C for 1000 hours.

Effect of the Fluoro-Substituent Position on the Crystal Structure and Photoluminescence of Microcrystals of Platinum ß-Diketonate Complexes.

Molecular packing has an important effect on the photophysical properties of crystalline materials. We demonstrate in this work the modulation of molecular packing and emission properties of microcrystals by minor molecular structural variations. Four platinum ß-diketonate complexes, with two fluoro substituents (1) or one fluoro atom substituted on different positions of the auxiliary phenylpyridine ligand (2-4) have been synthesized. These complexes were used to prepare one-dimensional microcrystals with well-defined shapes and uniform sizes. Although 1-4 display similar emission spectra in the solution state, the corresponding microcrystals display different emission colors from green to yellow and orange. In addition, different temperature-responsive (80-298 K) emission spectral changes have been observed from these microcrystals, including the intensity variation of the locally excited (LE) emission without obvious wavelength shifts, competition between the LE and metal-metal-to-ligand charge-transfer emissions, and the sole wavelength shift of the π-π excimer emissions. These differences in emission properties are rationalized by different molecular packings of these materials, as revealed by single-crystal X-ray analyses.

Stabilization of a Cyclometalated Ruthenium Sensitizer on Nanocrystalline TiO2 by an Electrodeposited Covalent Layer.

A cyclometalated ruthenium sensitizer 3 containing a triphenylamine unit was synthesized and immobilized on a nanocrystalline TiO2 surface. By using oxidative electrochemical deposition, a covalent layer of a related cyclometalated ruthenium complex 2 was coupled to the top of dye 3. Electrochemical studies suggested that complex 2 was immobilized on the TiO2/3 film surface by a tetraphenylbenzidine linker to form a dimer-like structure. The immobilization of 3 and 2 was further supported by absorption spectral analysis. The resulting electrodeposited TiO2/(3+2) film displays significantly enhanced sensitizer stabilization toward basic aqueous NaOH solution with respect to the original TiO2/3 film. The dye-sensitized solar cells with the TiO2/(3+2) photoanode display a power conversion efficiency of 4.4%, which is slightly inferior to that with the TiO2/3 film (5.1%) under the same measurement conditions.

Molecular Quadripod as a Noncovalent Interfacial Coupling Reagent for Forming Immobilized Coordination Assemblies.

A pyrene-cored molecular quadripod 1,3,6,8-tetra(di( p-pyrid-4-ylphenyl)amino)pyrene (TAPyr) is presented as a noncovalent interfacial coupling reagent for the immobilization of coordination assemblies. This bench-stable molecule is readily available and has a quadripod shape with four pyridine legs and four pyridine handles on the top exterior. By a simple and short dipping procedure under ambient conditions, TAPyr is firmly immobilized on electrode surfaces in an upright fashion as probed by electrochemical, absorption spectral, atomic force microscopy, and scanning tunneling microscopy analysis. Using Pd(PhCN)2Cl2 as a metallolinker, 4-ferrocenylpyridine, a pyridine-terminated monoruthenium complex 1, and a diruthenium complex 2 with two pyridine ends have been grafted onto the ITO/TAPyr surface. The obtained thin films exhibit good electrochemical stability that is comparable or superior to those prepared by the state-of-the-art Si-O-Sn covalent functionalization. Appealing electrochromism is demonstrated with the thin films of ruthenium complexes on ITO.

A Two-Dimensional Hole-Transporting Material for High-Performance Perovskite Solar Cells with 20 % Average Efficiency.

A readily available small molecular hole-transporting material (HTM), OMe-TATPyr, was synthesized and tested in perovskite solar cells (PSCs). OMe-TATPyr is a two-dimensional π-conjugated molecule with a pyrene core and four phenyl-thiophene bridged triarylamine groups. It can be readily synthesized in gram scale with a low lab cost of around US$ 50 g-1 . The incorporation of the phenyl-thiophene units in OMe-TATPyr are beneficial for not only carrier transportation through improved charge delocalization and intermolecular stacking, but also potential trap passivation via Pb-S interaction as supported by depth-profiling XPS, photoluminescence, and electrochemical impedance analysis. As a result, an impressive best power conversion efficiency (PCE) of up to 20.6 % and an average PCE of 20.0 % with good stability has been achieved for mixed-cation PSCs with OMe-TATPyr with an area of 0.09 cm2 . A device with an area of 1.08 cm2 based on OMe-TATPyr demonstrates a PCE of 17.3 %.

Near-Infrared and Two-Wavelength Electrochromism Based on Nanocrystalline TiO2 Films Functionalized with Ruthenium-Amine Conjugated Complexes.

Two cyclometalated ruthenium complexes 2 and 4 containing a redox-active amine substituent and three carboxylic acid groups were synthesized, where the ruthenium ion and the amine site were separated by a phenyl or biphenyl bridge for 2 and 4, respectively. Nanocrystalline TiO2 films on fluorine doped SnO2 (FTO)/glass substrates anchored with 2 or 4 were prepared. These films display two consecutive anodic waves in the potential region between +0.1 and +1.0 V vs Ag/AgCl. Among four organic solvents examined, the FTO/TiO2/2 film displays the best cyclic electrochemical stability in ClCH2CH2Cl. Both films exhibit promising two-step electrochromism in the near infrared region. A contrast ratio (ΔT%) of 42% at 1000 nm and 40% at 680 nm was achieved for the FTO/TiO2/2 film in the single- and double-oxidation process, respectively. In contrast, the FTO/TiO2/4 film shows electrochromism at 1300 nm (ΔT% = 58%) and 780 nm (ΔT% = 59%) in the single- and double-oxidation process, respectively. The coloration efficiency of these processes varies in a range of 150-270 cm2/C. These films are potentially useful as variable optical attenuators for telecommunications.

Transition from a Metal-Localized Mixed-Valence Compound to a Fully Delocalized and Bridge-Biased Electrophore in a Ruthenium-Amine-Ruthenium Tricenter System.

A series of cyclometalated diruthenium complexes with a redox-active amine bridge were synthesized. Depending on the terminal ligands of the ruthenium components and the substituent on the amine unit, the one-electron-oxidized state can be either in the form of a weakly or strongly coupled mixed-valence diruthenium complex, a fully charge-delocalized three-center system, or a bridge-biased electrophore. This transition among different electronic forms was supported by electrochemistry, near-infrared absorption, electron paramagnetic resonance, and density functional theory analysis.

Cyclometalated Osmium-Amine Electronic Communication through the p-Oligophenylene Wire.

A series of bis-tridentate cyclometalated osmium complexes with a redox-active triarylamine substituent have been prepared, where the amine substituent is separated from the osmium ion by a p-oligophenylene wire of various lengths. X-ray crystallographic data of complexes 3(PF6) and 4(PF6) with three or four repeating phenyl units between the osmium ion and the amine substituent are presented. These complexes show two consecutive anodic redox couples between +0.1 and +0.9 V vs Ag/AgCl, with the potential splitting in the range of 300-390 mV. A combined experimental and theoretical study suggests that, in the one-electron-oxidized state, the odd electron is delocalized for short congeners and localized on the osmium component for long congeners. The electronic coupling parameter (Vab) was estimated by the Marcus-Hush analysis. The distance dependence plot of ln(Vab) versus the osmium-amine geometrical distance (Rab) gives a negative linear relationship with a decay slope of -0.19 Å(-1), which is slightly steeper with respect to the previously reported ruthenium-amine series with the same molecular wire. DFT calculations with the long-range-corrected UCAM-B3LYP functional gave more reasonable results for the osmium complexes with respect to those with UB3LYP.

Osmium Bisterpyridine Complexes with Redox-Active Amine Substituents: A Comparison Study with Ruthenium Analogues.

Five osmium complexes with redox-active amine substituents, [Os(ttpy)(Ntpy)](PF6)2 (1(PF6)2), [Os(Ntpy)2](PF6)2 (2(PF6)2), [Os(ttpy)(NPhtpy)](PF6)2 (3(PF6)2), [Os(Ntpy)(NPhtpy)](PF6)2 (4(PF6)2), and [Os(NPhtpy)2](PF6)2 (5(PF6)2), have been prepared, where ttpy is 4'-tolyl-2,2':6',2″-terpyridine, Ntpy is 4'-(di-p-anisylamino)-2,2':6',2″-terpyridine, and NPhtpy is 4'-(di-p-anisylaminophen-4-yl)-2,2':6',2″-terpyridine. X-ray crystallographic data of 2(PF6)2 and 4(PF6)2 are presented. These complexes show rich visible absorptions attributed to the singlet metal-to-ligand charge-transfer ((1)MLCT), triplet MLCT, and intraligand charge-transfer transitions. Complexes 3(PF6)2 and 5(PF6)2 show weak emissions around 720 nm at room temperature. All complexes show stepwise oxidations of the osmium ion and the amine segment. However, the redox potentials and the order of the Os(III/II) and N(•+/0) processes vary significantly, depending on the electronic nature of the amine substituents. In the singly oxidized state, either Os(II) → N(•+) MLCT or N → Os(III) ligand-to-metal charge-transfer transitions in the near-infrared region have been observed. For complexes 2(PF6)2, 4(PF6)2, and 5(PF6)2 with two amine substituents, no evidence has been observed for the presence of osmium-mediated amine-amine electronic coupling. Density functional theory (DFT) and time-dependent DFT calculations have been performed to complement these experimental results. The one-electron-oxidized forms 3(3+) and 5(3+) show distinct electron paramagnetic resonance (EPR) signals in CH3CN at room temperature. However, complexes 1(3+), 2(3+), and 4(3+) are EPR silent under similar conditions. In addition, a comparison study has been made between these osmium complexes and the previously reported ruthenium analogues.

Tuning the electronic coupling in cyclometalated diruthenium complexes through substituent effects: a correlation between the experimental and calculated results.

A common bridging ligand, 3,3',5,5'-tetrakis(N-methylbenzimidazol-2-yl)biphenyl, and four terpyridine terminal ligands with various substituents (amine, tolyl, nitro, and ester groups) have been used to synthesize ten cyclometalated diruthenium complexes 1(2+) -10(2+) . Among them, compounds 1(2+) -6(2+) are redox nonsymmetric, and others are symmetric. These complexes show two Ru(III/II) processes and an intervalence charge transfer (IVCT) transition in the one-electron oxidized state. The potential separation (ΔE) of 1(2+) -10(2+) has been correlated to the energy difference ΔG(0) , the energy of the IVCT band Eop , and the ground-state delocalization coefficient α(2) . Time-dependent (TD)DFT calculations suggest that the absorptions in the visible region of 1(2+) -6(2+) are mainly associated with the metal-to-ligand charge-transfer transitions from both ruthenium ions and to both terminal ligands and the bridging ligand. However, the energies of these transitions vary significantly. DFT calculations have been performed on 1(2+) -6(2+) and 1(3+) -6(3+) to give information on the electronic structures and spin populations of the mixed-valent compounds. The TDDFT-predicted IVCT excitations reproduce well the experimental trends in transition energies. In addition, three monoruthenium complexes have been synthesized for a comparison study.

Strongly coupled cyclometalated ruthenium-triarylamine hybrids: tuning electrochemical properties, intervalence charge transfer, and spin distribution by substituent effects.

Nine cyclometalated ruthenium complexes with a redox-active diphenylamine unit in the para position to the RuC bond were prepared. MeO, Me, and Cl substituents on the diphenylamine unit and three types of auxiliary ligands-bis(N-methylbenzimidazolyl)pyridine (Mebip), 2,2':6',2''-terpyridine (tpy), and trimethyl-4,4',4''-tricarboxylate-2,2':6',2''-terpyridine (Me3 tctpy)--were used to vary the electronic properties of these complexes. The derivative with an MeO-substituted amine unit and Me3 tctpy ligand was studied by single-crystal X-ray analysis. All complexes display two well-separated redox waves in the potential region of +0.1 to +1.0 V versus Ag/AgCl, and the potential splitting ranges from 360 to 510 mV. Spectroelectrochemical measurements show that these complexes display electrochromism at low potentials and intense near-infrared (NIR) absorptions. In the one-electron oxidized form, the complex with the Cl-substituted amine unit and Mebip ligand shows a moderate ligand-to-metal charge transfer at 800 nm. The other eight complexes show asymmetric, narrow, and intense intervalence charge-transfer transitions in the NIR region, which are independent of the polarity of the solvent. The Mebip-containing complexes display rhombic or broad isotropic EPR signals, whereas the other seven complexes show relatively narrow isotropic EPR signals. In addition, DFT and time-dependent DFT studies were performed to gain insights into the spin distributions and NIR absorptions.

Oligotriarylamines with a pyrene core: a multicenter strategy for enhancing radical cation and dication stability and tuning spin distribution.

Monoamine 1, diamines 2-4, triamine 5, and tetraamine 6 have been synthesized by substituting dianisylamino groups at the 1-, 3-, 6-, and/or 8-positions of pyrene. Diamines 2-4 differ in the positions of the amine substituents. No pyrene-pyrene interactions are evident in the single-crystal packing of 3, 4, and 6. With increasing numbers of amine substituents, the first oxidation potential decreases progressively from the mono- to the tetraamine. These compounds show intense charge-transfer (CT) emission in CH2 Cl2 at around 530 nm with quantum yields of 48-68 %. Upon stepwise oxidation by electrolysis or chemical oxidation, these compounds were transformed into radical cations 1(⋅+) -6(⋅+) and dications 2(2+) -6(2+) , which feature strong visible and near-infrared absorptions. Time-dependent density functional theory studies suggested the presence of localized transitions from the pyrene radical cation and aminium radical cation, intervalence CT, and CT between the pyrene and amine moieties. Spectroscopic studies indicated that these radical cations and dications have good stability. Triamine 5 and tetraamine 6 formed efficient CT complexes with tetracyanoquinodimethane in solution. The results of EPR spectroscopy and density functional theory calculations suggested that the dications 2(2+) -4(2+) have a triplet ground state, whereas 5(2+) and 6(2+) have a singlet ground state. The dication of 1,3-disubstituted diamine 4 exhibits a strong EPR signal.

Nylons with Highly-Bright and Ultralong Organic Room-Temperature Phosphorescence.

Endowing the widely-used synthetic polymer nylon with high-performance organic room-temperature phosphorescence would produce advanced materials with a great potential for applications in daily life and industry. One key to achieving this goal is to find a suitable organic luminophore that can access the triplet excited state with the aid of the nylon matrix by controlling the matrix-luminophore interaction. Herein we report highly-efficient room-temperature phosphorescence nylons by doping cyano-substituted benzimidazole derivatives into the nylon 6 matrix. These homogeneously doped materials show ultralong phosphorescence lifetimes of up to 1.5 s and high phosphorescence quantum efficiency of up to 48.3% at the same time. The synergistic effect of the homogeneous dopant distribution via hydrogen bonding interaction, the rigid environment of the matrix polymer, and the potential energy transfer between doped luminophores and nylon is important for achieving the high-performance room-temperature phosphorescence, as supported by combined experimental and theoretical results with control compounds and various polymeric matrices. One-dimensional optical fibers are prepared from these doped room-temperature phosphorescence nylons that can transport both blue fluorescent and green afterglow photonic signals across the millimeter distance without significant optical attenuation. The potential applications of these phosphorescent materials in dual information encryption and rewritable recording are illustrated.

Monometallic osmium(II) complexes with bis(N-methylbenzimidazolyl)benzene or -pyridine: a comparison study with ruthenium(II) analogues.

Seven bis-tridentate osmium complexes with Mebib or Mebip (Mebib is the 2-deprotonated form of 1,3-bis(N-methylbenzimidazolyl)benzene and Mebip is bis(N-methylbenzimidazolyl)pyridine) have been prepared, and their electrochemical and spectroscopic properties are compared with ruthenium structural analogues. Among them, four complexes have the [Os(NCN)(NNN)]-type coordination, including [Os(Mebib)(Mebip)](PF6)2 (1(PF6)2), [Os(dpb)(Mebip)](PF6) (2(PF6), dpb is the 2-deprotonated form of 1,3-di(pyrid-2-yl)benzene), [Os(Mebib)(ttpy)](PF6) (3(PF6), ttpy = 4'-tolyl-2,2':6',2"-terpyridine), and [Os(dpb)(ttpy)](PF6) (4(PF6)). The other three complexes are [Os(Mebip)2](PF6)2 (5(PF6)2), [Os(Mebip)(tpy)](PF6)2 (6(PF6)2, tpy = 2,2':6',2"-terpyridine), and [Os(ttpy)2](PF6)2 (7(PF6)2) with the [Os(NNN)(NNN)]-type coordination. Single crystals of 2(PF6) and 6(PF6)2 have been obtained, and their structures are studied by X-ray crystallographic analysis. The Os(II/III) redox potentials of 1(PF6)2 to 7(PF6)2 progressively increase from +0.04, +0.23, +0.24, +0.36, +0.56, +0.79 to +0.94 V vs Ag/AgCl, which are 200-300 mV less positive relative to the Ru(II/III) potentials of their ruthenium counterparts. The highest occupied molecular orbital energy levels of 1(+)-7(2+) are calculated to vary in a descending order. The ruthenium and osmium complexes have singlet metal-to-ligand charge-transfer (MLCT) transitions of similar energies and band shapes, while the osmium complexes display additional (3)MLCT transitions in the lower-energy region. Complexes 6(PF6)2 and 7(PF6)2 emit weakly at 780 and 740 nm, respectively. Complex 1(PF6)2 was synthesized as the oxidized Os(III) salt because of the low Os(II/III) potential. The transformation of 1(2+) to 1(+) by chemical reduction or electrolysis led to the emergence of the (1)MLCT transitions in the visible region.