Flexible Grid Graphene Electrothermal Films for Real-Time Monitoring Applications.

Flexible electrothermal films are crucial for protecting equipment and systems in cold weather, such as ice blockages in natural gas pipelines and icing on aircraft wings. Therefore, a flexible electric heater is one of the essential devices in industrial operations. One of the main challenges is to develop flexible electrothermal films with low operating voltage, high steady-state temperature, and good mechanical stability. In this study, a flexible electrothermal film based on graphene-patterned structures was manufactured by combining the laser induction method and the transfer printing process. The grid structure design provides accurate real-time monitoring for the application of electrothermal films and shows potential in solving problems related to deicing and clearing ice blockages in pipelines. The flexible electrothermal film can reach a high heating temperature of 165 °C at 15 V and exhibits sufficient heating stability. By employing a simple and efficient method to create a flexible, high-performance electrothermal film, we provide a reliable solution for deicing and monitoring applications.

Bio-Inspired Soft-Rigid Hybrid Smart Artificial Muscle Based on Liquid Crystal Elastomer and Helical Metal Wire.

Artificial muscles are of significant value in robotic applications. Rigid artificial muscles possess a strong load-bearing capacity, while their deformation is small; soft artificial muscles can be shifted to a large degree; however, their load-bearing capacity is weak. Furthermore, artificial muscles are generally controlled in an open loop due to a lack of deformation-related feedback. Human arms include muscles, bones, and nerves, which ingeniously coordinate the actuation, load-bearing, and sensory systems. Inspired by this, a soft-rigid hybrid smart artificial muscle (SRH-SAM) based on liquid crystal elastomer (LCE) and helical metal wire is proposed. The thermotropic responsiveness of the LCE is adopted for large reversible deformation, and the helical metal wire is used to fulfill high bearing capacity and electric heating function requirements. During actuation, the helical metal wire's resistance changes with the LCE's electrothermal deformation, thereby achieving deformation-sensing characteristics. Based on the proposed SRH-SAM, a reconfigurable blazed grating plane and the effective switch between attachment and detachment in bionic dry adhesion are accomplished. The SRH-SAM opens a new avenue for designing smart artificial muscles and can promote the development of artificial muscle-based devices.

Microcrack Arrays in Dense Graphene Films for Fast-Ion-Diffusion Supercapacitors.

Laminated graphene film has great potential in compact high-power capacitive energy storage owing to the high bulk density and opened architecture. However, the high-power capability is usually limited by tortuous cross-layer ion diffusion. Herein, microcrack arrays are fabricated in graphene films as fast ion diffusion channels, converting tortuous diffusion into straightforward diffusion while maintaining a high bulk density of 0.92 g cm-3 . Films with optimized microcrack arrays exhibit sixfold improved ion diffusion coefficient and high volumetric capacitance of 221 F cm-3 (240 F g-1 ), representing a critical breakthrough in optimizing ion diffusion toward compact energy storage. This microcrack design is also efficient for signal filtering. Microcracked graphene-based supercapacitor with 30 µg cm-2  mass loading exhibits characteristic frequency up to 200 Hz with voltage window up to 4 V, showing high promise for compact, high-capacitance alternating current (AC) filtering. Moreover, a renewable energy system is conducted using microcrack-arrayed graphene supercapacitors as filter-capacitor and energy buffer, filtering and storing the 50 Hz AC electricity from a wind generator into the constant direct current, stably powering 74 LEDs, demonstrating enormous potential in practical applications. More importantly, this microcracking approach is roll-to-roll producible, which is cost-effective and highly promising for large-scale manufacture.

Micropatterned Fluororubber-Based Dry Adhesive for Pan-Semiconductor Production Line with Complicated Operating Conditions.

The efficient and safe manipulation of precision materials (such as thin and fragile wafers and glass substrates for flat panel displays) under complicated operating conditions with vacuum, high temperature, and low preload stress is an essential task for pan-semiconductor production lines. However, current manipulation approaches such as suction-based gripping (invalid under vacuum conditions) and mechanical clamping (stress concentration at the contact interfaces) are challenged to satisfy such complex requirements. Herein, fluororubber (FKM) is employed as an adhesive material to overcome such challenges due to its outstanding thermostability, availability under vacuum environments, and high adhesion at low contacting preloads. However, the adhesion of the FKM film decreases significantly with increasing temperature (decrease by 84.83% at 245 °C). Consequently, a micropatterned FKM-based dry adhesive (MFA) fabricated by laser etching is developed. The experimental results reveal that MFAs are efficient in restraining adhesion attenuation at high temperatures (minimum 15% decrease at 245 °C). The numerical analysis and in situ observations reveal the mechanism of the MFAs in restraining adhesion attenuation. The contamination-free and high adhesion at low contacting preload of MFAs can be of great interest in pan-semiconductor production lines that require complicated operating conditions on temperature, vacuum, and interface stress.

Discretely-supported transfer nanoimprint anti-reflection nanostructures on complex uneven surface of Fresnel lenses.

Nanopatterning complex uneven surface of numerous functional devices to improve their performance is significantly appealing; however, it is extremely challenging. This study proposes a discretely-supported transfer nanoimprint technique to fabricate nanostructures on complex device surfaces containing multi-spatial frequencies. First, a discretely-supported nanoimprint template was designed based on the built energy criterion. A contact fidelity of over 99% was achieved between the designed template and the targeted complex uneven substrate surface. Next, the prefilled nanostructures on the template were transferred to the target surface after contact. By precisely controlling the amount of micro-droplet jetting on the template on-demand, the accumulation of the polymer in the micro-valley sites on the complex substrate was avoided, thus maintaining the morphology and generating function of the devices. Finally, high-quality Fresnel lenses with broadband wide-directional antireflection and excellent imaging performance were developed by imprinting subwavelength-tapered nanostructures on the relief surface.

Nanoimprinting Metal-Containing Nanoparticles-Doping-Grating for High Polarization Performance Light Emitting Chips by Scattering-Induced Enhancement.

Polarized radiative semiconductor luminous chips have huge application potentials in lots of high value-added fields. Integrating a subwavelength grating is recognized as the most promising method for development of polarized chips, but still faces the challenge of lower polarized radiation performance. The paper proposed and developed a scattering-induced polarization enhancement light emitting diodes chips by directly nanoimprinting metal-containing nanoparticles-doping-grating on the top surface of a common flip-chips. The utilization rate of quantum well light emission on the developed polarized chips was improved more than 30%. More attractively, the doped scattering nanoparticles play as a scattering-induced polarization state converter that sandwiched in the top aluminum grating and bottom silver reflector on the chips. The originally non-radiative light with an electric field vector parallel to the grating lines is reflected back and forth among the sandwich until it changes to the perpendicular vibration mode to radiate outside the chips. Therefore, the polarization extinction ratio was greatly improved compared with the samples without doping.

Nanoimprinting metal-containing nanoparticle-doped gratings to enhance the polarization of light-emitting chips by induced scattering.

Polarized radiative luminous semiconductor chips have huge application potential in many highly value-added fields. The integration of a subwavelength grating is recognized to be the most promising method for the development of polarized chips, but still faces the challenge of low polarized radiative performance. This paper describes a proposal for, and the development of, a scattering-induced enhanced-polarization light-emitting diode chip by directly nanoimprinting a metal-containing nanoparticle-doped grating onto the top surface of a common flip chip. The rate at which quantum-well light emission is used by the developed polarized chip is improved by more than 30%. More attractively, the doped scattering nanoparticles function as a scattering-induced polarization state converter that is sandwiched in between the top aluminum grating and the bottom silver reflector of the chips. The originally non-radiated light, with an electric-field vector parallel to the grating lines, is reflected back and forth inside the sandwich until it changes to the perpendicular vibration mode and is radiated outside the chip. Therefore, the polarization extinction ratio is greatly improved, compared to undoped samples.

An electrically active gecko-effect soft gripper under a low voltage by mimicking gecko's adhesive structures and toe muscles.

With the combination of the passive adhesion generated by micro/nano-structures at their feet and the active mechanical stimulus of their toe muscles, geckos can stably walk on vertical walls and horizontal ceilings. Inspired by such stimuli-responsive systems in nature, an active adhesive soft gripper stimulated by low voltage (usually ≤6 V), consisting of a passive mushroom-like adhesive structure and an electrically active liquid crystal elastomer working as toe muscles, is proposed in this study. Through voltage on/off switching, reversible deformation can be generated for switchable adhesion, where high adhesion can be achieved under the action of a preload force accompanied by a 0 V voltage and low adhesion can be obtained under an exerted voltage. This gecko-inspired soft gripper was tested and found to be successful as a transport device for gripping/releasing objects with different features, such as a glass ball, a sample bottle, and a steel weight. To the best of our knowledge, the present study is the first to propose an electrically active gecko-inspired soft gripper for transferring objects with different surfaces by the control of low voltage, processing great application potential in industrial lines and daily life and providing a novel perspective on soft gripper design.

Multilayered Dual Functional SiO2@Au@SiO2@QD Nanoparticles for Simultaneous Intracellular Heating and Temperature Measurement.

This paper discusses synthesis and application of dual functional SiO2@Au@SiO2@QD composite nanoparticles for integrated intracellular heating with temperature motoring. The particles are of multilayered concentric structure, consisting of Au nanoshells covered with quantum dots, with the former for infrared heating through localized surface plasma resonance while the later for temperature monitoring. The key to integrate plasmonic-heating/thermal-monitoring on a single composite nanoparticle is to ensure that the quantum dots be separated at a certain distance away from the Au shell surface in order to ensure a detectable quantum yield. Direct attachment of the quantum dots onto the Au shell would render the quantum dots practically functionless for temperature monitoring. To integrate quantum dots into Au nanoshells, a quantum quenching barrier of SiO2 was created by modifying a Stöber-like process. Materials, optical and thermal characterization was made of these composite nanoparticles. Cellular uptake of the nanoparticles was discussed. Experiments were performed on simultaneous in vitro heating and temperature monitoring in a cell internalized with the dual-functional SiO2@Au@SiO2@QD composite nanoparticles.

Protective integrated transparent conductive film with high mechanical stability and uniform electric-field distribution.

A stable and uniform electric field is to be generated even though a large mechanical deformation is the primary criterion for a transparent conductive film. This study proposes a protective integrated transparent conductive film (PITCF) including indium tin oxide (ITO), a silver nanowire (Ag NW) network, and a protective polydimethylsiloxane (PDMS) layer. A firmly bonding process of ITO/Ag NW/PDMS is established to avoid the failure of Ag NW to be oxidized by interlayer residual air or wrapped by liquid PDMS. Besides the good optical transparency, haze, and electrical conductivity as the only ITO film, the developed PITCF exhibits excellent bending resistance and mechanical stability. The ITO rupture fragments after bending deformation are firmly interconnected by the constrained Ag NWs. Even though the PITCF is bended more than 1000 cycles at a 6.5 mm bending distance, the changes in electrical resistance of PITCF are below 9.7%. Finally, an electroluminescent device with high bending resistance and uniform and high luminance is developed based on the designed PITCF.

High-Performance Piezoelectric Nanogenerators with Imprinted P(VDF-TrFE)/BaTiO3 Nanocomposite Micropillars for Self-Powered Flexible Sensors.

Piezoelectric nanogenerators with large output, high sensitivity, and good flexibility have attracted extensive interest in wearable electronics and personal healthcare. In this paper, the authors propose a high-performance flexible piezoelectric nanogenerator based on piezoelectrically enhanced nanocomposite micropillar array of polyvinylidene fluoride-trifluoroethylene (P(VDF-TrFE))/barium titanate (BaTiO3 ) for energy harvesting and highly sensitive self-powered sensing. By a reliable and scalable nanoimprinting process, the piezoelectrically enhanced vertically aligned P(VDF-TrFE)/BaTiO3 nanocomposite micropillar arrays are fabricated. The piezoelectric device exhibits enhanced voltage of 13.2 V and a current density of 0.33 µA cm-2 , which an enhancement by a factor of 7.3 relatives to the pristine P(VDF-TrFE) bulk film. The mechanisms of high performance are mainly attributed to the enhanced piezoelectricity of the P(VDF-TrFE)/BaTiO3 nanocomposite materials and the improved mechanical flexibility of the micropillar array. Under mechanical impact, stable electricity is stably generated from the nanogenerator and used to drive various electronic devices to work continuously, implying its significance in the field of consumer electronic devices. Furthermore, it can be applied as self-powered flexible sensor work in a noncontact mode for detecting air pressure and wearable sensors for detecting some human vital signs including different modes of breath and heartbeat pulse, which shows its potential applications in flexible electronics and medical sciences.

Investigation of the role of template features on the electrically induced structure formation (EISF) for a faithful duplication.

Electrically induced structure formation, as a physical approach to fabricate micro/nanostructures, has attracted much attention because of the simple process, low-cost, high-efficiency, and wide applications on electronics, microfluidics, and so forth. Hitherto, the influence of some process parameters, such as voltage, air gap, film thickness, polymer properties, on the polymeric behavior, and the structure formation has been explored, neglecting the effects of the template features, which affect the polymer deformation. Especially for the conductive protrusions directly contacting the polymer, the phenomenon of electric breakdown may occur, leading to a failure of structure formation. The limitation of the research on the template features triggers the necessity to study its influence for a faithful deformation. In this paper, three types of patterned template are studied based on the electric field at the air-polymer interface, consisting of completely conductive template, partially conductive template, and dielectric template. Comprehensive consideration of the electric intensity for a sufficient driving pressure and the leaky current for preventing damaging the polymer, some guiding opinions on the template material and geometry can be provided to design the patterned template for the electrically induced structure formation process with a purpose for a faithful structure.

A photocurable leaky dielectric for highly electrical insulating electrohydrodynamic micro-/nanopatterns.

This communication describes an innovative photocurable leaky dielectric for electrohydrodynamic patterning (EHDP). Based on the well-designed molecular structure, the material in its liquid state exhibits low viscosity, high homogeneity, and more importantly a leaky dielectric characteristic; meanwhile, UV light irradiation transforms it from a liquid leaky dielectric into a solid perfect dielectric instantaneously via an interfacial reaction. Two typical EHDP processes have confirmed that the beneficial properties of this material help to rapidly fulfill a higher aspect ratio and/or smaller feature size patterning compared to its perfect dielectric counterpart. Therefore, this material provides the potential in accessing high-performance EHDP towards fabricating electrically insulating micro-/nanostructures.

Trapping and chaining self-assembly of colloidal polystyrene particles over a floating electrode by using combined induced-charge electroosmosis and attractive dipole-dipole interactions.

We propose a novel low-frequency strategy to trap 10 µm colloidal polystyrene (PS) particles of small buoyancy velocity on the surface of a floating electrode, on the basis of combined induced-charge electroosmotic (ICEO) flow and dipole-dipole chaining phenomenon. For field frequencies of 5-50 Hz, much lower than the reciprocal RC time scale, double-layer polarization makes electric field lines pass around the 'insulating' surface of the ideally polarizable floating electrode. Once the long-range ICEO convective micro-vortexes transport particles quickly from the bulk fluid to the electrode surface, neighbouring particles aligned along the local horizontal electric field attract one another by attractive dipolar interactions, and form arrays of particle chains that are almost parallel with the applied electric field. Most importantly, this low-frequency trapping method takes advantage of the dielectrophoretic (DEP) particle-particle interaction to enhance the downward buoyancy force of this dipolar chaining assembly structure, in order to overcome the upward ICEO fluidic drag and realize stable particle trapping around the flow stagnation region. For the sake of comparison, the field frequency is further raised far above the DC limit. At the intermediate frequencies of 200 Hz-2 kHz, this trapping method fails to work, since the normal electric field component emanates from the conducting electrode surface. Besides, at high field frequencies (>3 kHz), particles can be once again effectively trapped at the electrode center, though with a compact (3 kHz) or disordered (10 kHz) 2D packing state on the electrode surface and mainly governed by the short-range negative DEP force field, resulting in requiring a much longer trapping time. To gain a better interpretation of the various particle behaviours observed in experiments, we develop a theoretical framework that takes into account both Maxwell-Wagner interfacial charge relaxation at the particle/electrolyte interface and the field-induced double-layer polarization at the electrode/electrolyte interface, and apply it to quantify the particle-particle electrokinetic interactions. With this simple geometrical configuration of a floating electrode, our results provide a new way to realize trapping of colloidal particles with a small buoyancy velocity under the combined action of ICEO flow and an attractive dipole-dipole interaction.

Electrohydrodynamic pressure enhanced by free space charge for electrically induced structure formation with high aspect ratio.

Electrically induced structure formation (EISF) is an interesting and unique approach for generating a microstructured duplicate from a rheological polymer by a spatially modulated electric field induced by a patterned template. Most of the research on EISF have so far used various dielectric polymers (with an electrical conductivity smaller than 10(-10) S/m that can be considered a perfect dielectric), on which the electric field induces a Maxwell stress only due to the dipoles (or bounded charges) in the polymer molecules, leading to a structure with a small aspect ratio. This paper presents a different approach for improving the aspect ratio allowed in EISF by doping organic salt into the perfect dielectric polymer, i.e., turning the perfect dielectric into a leaky dielectric, considering the fact that the free space charges enriched in the leaky dielectric polymer can make an additional contribution to the Maxwell stress, i.e., electrohydrodynamic pressure, which is desirable for high aspect ratio structuring. Our numerical simulations and experimental tests have shown that a leaky dielectric polymer, with a small conductivity comparable to that of deionized water, can be much more effective at being electrohydrodynamically deformed into a high aspect ratio in comparison with a perfect dielectric polymer when both of them have roughly the same dielectric constant.

Formation of arbitrary patterns in ultraviolet cured polymer film via electrohydrodynamic patterning.

Electrohydrodynamic patterning of arbitrary patterns is achieved by optimizing the critical parameters (applied voltage and spacer height). The applied voltage has a great influence on the fidelity of L-shaped line structures with different sizes. The L-shaped line structures with high fidelity are obtained by using the moderate applied voltage. The spacer height has a great influence on the fidelity of square structures with different sizes. The square structures with high fidelity are obtained by using the low height spacer. The multi-field coupling transient finite element simulation demonstrates that the lack of polymer owing to the high height spacer leads to the formation of defects.

Memristor-Based Artificial Chips.

Memristors, promising nanoelectronic devices with in-memory resistive switching behavior that is assembled with a physically integrated core processing unit (CPU) and memory unit and even possesses highly possible multistate electrical behavior, could avoid the von Neumann bottleneck of traditional computing devices and show a highly efficient ability of parallel computation and high information storage. These advantages position them as potential candidates for future data-centric computing requirements and add remarkable vigor to the research of next-generation artificial intelligence (AI) systems, particularly those that involve brain-like intelligence applications. This work provides an overview of the evolution of memristor-based devices, from their initial use in creating artificial synapses and neural networks to their application in developing advanced AI systems and brain-like chips. It offers a broad perspective of the key device primitives enabling their special applications from the view of materials, nanostructure, and mechanism models. We highlight these demonstrations of memristor-based nanoelectronic devices that have potential for use in the field of brain-like AI, point out the existing challenges of memristor-based nanodevices toward brain-like chips, and propose the guiding principle and promising outlook for future device promotion and system optimization in the biomedical AI field.

Design Criteria for Architected Materials with Programmable Mechanical Properties Within Theoretical Limit Ranges.

Architected materials comprising periodic arrangements of cells have attracted considerable interest in various fields because of their unconventional properties and versatile functionality. Although some better properties may be exhibited when this homogeneous layout is broken, most such studies rely on a fixed material geometry, which limits the design space for material properties. Here, combining heterogeneous and homogeneous assembly of cells to generate tunable geometries, a hierarchically architected material (HAM) capable of significantly enhancing mechanical properties is proposed. Guided by the theoretical model and 745 752 simulation cases, generic design criteria are introduced, including dual screening for unique mechanical properties and careful assembly of specific spatial layouts, to identify the geometry of materials with extreme properties. Such criteria facilitate the potential for unprecedented properties such as Young's modulus at the theoretical limit and tunable positive and negative Poisson's ratios in an ultra-large range. Therefore, this study opens a new paradigm for materials with extreme mechanical properties.

Ultrahigh Energy Storage in Tungsten Bronze Dielectric Ceramics Through a Weakly Coupled Relaxor Design.

Dielectric energy-storage capacitors, known for their ultrafast discharge time and high-power density, find widespread applications in high-power pulse devices. However, ceramics featuring a tetragonal tungsten bronze structure (TTBs) have received limited attention due to their lower energy-storage capacity compared to perovskite counterparts. Herein, a TTBs relaxor ferroelectric ceramic based on the Gd0.03 Ba0.47 Sr0.485-1.5 x Smx Nb2 O6 composition, exhibiting an ultrahigh recoverable energy density of 9 J cm-3 and an efficiency of 84% under an electric field of 660 kV cm-1 is reported. Notably, the energy storage performance of this ceramic shows remarkable stability against frequency, temperature, and cycling electric field. The introduction of Sm3+ doping is found to create weakly coupled polar nanoregions in the Gd0.03 Ba0.47 Sr0.485 Nb2 O6 ceramic. Structural characterizations reveal that the incommensurability parameter increases with higher Sm3+ content, indicative of a highly disordered A-site structure. Simultaneously, the breakdown strength is also enhanced by raising the conduction activation energy, widening the bandgap, and reducing the electric field-induced strain. This work presents a significant improvement on the energy storage capabilities of TTBs-based capacitors, expanding the material choice for high-power pulse device applications.

Ice-Enabled Transfer of Graphene on Copper Substrates Enhanced by Electric Field and Cu2O.

Graphene films grown by the chemical vapor deposition (CVD) method suffer from contamination and damage during transfer. Herein, an innovative ice-enabled transfer method under an applied electric field and in the presence of Cu2O (or Cu2O-Electric-field Ice Transfer, abbreviated as CEIT) is developed. Ice serves as a pollution-free transfer medium while water molecules under the electric field fully wet the graphene surface for a bolstered adhesion force between the ice and graphene. Cu2O is used to reduce the adhesion force between graphene and copper. The combined methodology in CEIT ensures complete separation and clean transfer of graphene, resulting in successfully transferred graphene to various substrates, including polydimethylsiloxane (PDMS), Teflon, and C4F8 without pollution. The graphene obtained via CEIT is utilized to fabricate field-effect transistors with electrical performances comparable to that of intrinsic graphene characterized by small Dirac points and high carrier mobility. The carrier mobility of the transferred graphene reaches 9090 cm2 V-1 s-1, demonstrating a superior carrier mobility over that from other dry transfer methods. In a nutshell, the proposed clean and efficient transfer method holds great potential for future applications of graphene.