RESUMO
Artificial counterparts of conical-shaped transmembrane protein channels are of interest in biomedical sciences for biomolecule detection and selective ion permeation based on ionic size and/or charge differences. However, industrial-scale applications such as seawater desalination, separation of mono- from divalent cations, and treatment of highly-saline industrial waste effluents are still big challenges for such biomimetic channels. A simple monomer seeding experimental approach is used to grow ionically conductive biomimetic charged nanocone pores at the surface of an acid-functionalized membrane. These readily scalable nanocone membranes enable ultra-fast cation permeation (Na+ =8.4× vs. Mg2+ =1.4×) and high ion charge selectivity (Na+ /Mg2+ =6×) compared to the commercial state-of-the-art permselective membrane (CSO, Selemion, Japan) owing to negligible surface resistance and positively charged conical pore walls.
Assuntos
Materiais Biomiméticos/química , Cátions Bivalentes/metabolismo , Permeabilidade da Membrana Celular , Canais Iônicos/metabolismo , Nanoporos , Canais Iônicos/química , PorosidadeRESUMO
BACKGROUND: Accumulation of lead (Pb) in agricultural soils has become a major factor for reduced crop yields and poses serious threats to humans consuming agricultural products. The present study investigated the effects of KNO3 seed priming (0 and 0.5% KNO3 ) on growth of maize (Zea mays L.) seedlings exposed to Pb toxicity (0, 1300 and 2550 mg kg-1 Pb). RESULTS: Pb exposure markedly reduced the growth of maize seedlings and resulted in higher Pb accumulation in roots than shoots. Pretreatment of seeds with KNO3 significantly improved the germination percentage and increased physiological indices. A stimulating effect of KNO3 seed priming was also observed on pigments (chlorophyll a, b, total chlorophyll and carotenoid contents) of Pb-stressed plants. Low translocation of Pb from roots to shoots caused an increased accumulation of total free amino acids and higher activities of catalase, peroxidase, superoxide dismutase and ascorbate peroxidase in roots as compared to shoot, which were further enhanced by exogenous KNO3 supply to prevent Pb toxicity. CONCLUSION: Maize accumulates more Pb in roots than shoot at early growth stages. Priming of seeds with KNO3 prevents Pb toxicity, which may be exploited to improve seedling establishment in crop species grown under Pb contaminated soils. © 2017 Society of Chemical Industry.
Assuntos
Chumbo/toxicidade , Nitratos/farmacologia , Compostos de Potássio/farmacologia , Sementes/efeitos dos fármacos , Sementes/crescimento & desenvolvimento , Zea mays/efeitos dos fármacos , Antioxidantes/análise , Antioxidantes/metabolismo , Carotenoides/análise , Clorofila/análise , Contaminação de Alimentos/prevenção & controle , Germinação/efeitos dos fármacos , Chumbo/análise , Raízes de Plantas/química , Plântula/efeitos dos fármacos , Plântula/crescimento & desenvolvimento , Poluentes do Solo/análise , Zea mays/crescimento & desenvolvimentoRESUMO
Membranes of sub-2-nanometer channels show high ion transport rates, but it remains a great challenge to design such membranes with desirable ion selectivities for ion separation applications. Here, covalent organic framework (COF) membranes with a channel size of ≈1.4 nm and abundant hydrogen bonding sites, exhibiting efficient ion sieving properties are demonstrated. The COF membranes have high monovalent cation permeation rates of 0.1-0.2 mol m-2 h-1 and extremely low multivalent cation permeabilities, leading to high monovalent over divalent ion selectivities for K+ /Mg2+ of ≈765, Na+ /Mg2+ of ≈680, and Li+ /Mg2+ of ≈217. Experimental measurements and theoretical simulations reveal that the hydrogen bonding interaction between hydrated cations and the COF channel wall governs the high selectivity, and divalent cations transport through the channel needs to overcome higher energy barriers than monovalent cations. These findings provide an effective strategy for developing sub-2-nanometer sized membranes with specific interaction sites for high-efficiency ionic separation.
RESUMO
Highly conductive anion-exchange membranes (AEMs) are desirable for applications in various energy storage and conversion technologies. However, conventional AEMs with bulky HCO3 - or Br- as counterion generally exhibit low conductivity because the covalent bonding restrains the tethered cationic group's mobility and rotation. Here, we report an alternative polyrotaxane AEM with nontethered and free-shuttling phosphonium cation. As proved by temperature-dependent NMR, solid-state NMR, and molecular dynamics simulation, the phosphonium cation possesses a thermally trigged shuttling behavior, broader extension range, and greater mobility, thus accelerating the diffusion conduction of bulky anions. Owing to this striking feature, high HCO3 - conductivity of 105 mS cm-1 at 90°C was obtained at a relatively lower ion-exchange capacity of 1.17 mmol g-1. This study provides a new concept for developing highly conductive anion-exchange membranes and will catalyze the exploration of new applications for polyrotaxanes in ion conduction processes.
RESUMO
Optimal pH conditions for efficient artificial photosynthesis, hydrogen/oxygen evolution reactions, and photoreduction of carbon dioxide are now successfully achievable with catalytic bipolar membranes-integrated water dissociation and in-situ acid-base generations. However, inefficiency and instability are severe issues in state-of-the-art membranes, which need to urgently resolve with systematic membrane designs and innovative, inexpensive junctional catalysts. Here we show a shielding and in-situ formation strategy of fully-interconnected earth-abundant goethite Fe+3O(OH) catalyst, which lowers the activation energy barrier from 5.15 to 1.06 eV per HO - H bond and fabricates energy-efficient, cost-effective, and durable shielded catalytic bipolar membranes. Small water dissociation voltages at limiting current density (ULCD: 0.8 V) and 100 mA cm-2 (U100: 1.1 V), outstanding cyclic stability at 637 mA cm-2, long-time electro-stability, and fast acid-base generations (H2SO4: 3.9 ± 0.19 and NaOH: 4.4 ± 0.21 M m-2 min-1 at 100 mA cm-2) infer confident potential use of the novel bipolar membranes in emerging sustainable technologies.
RESUMO
Polymer electrolyte membrane fuel cells can generate high power using a potentially green fuel (H2 ) and zero emissions of greenhouse gas (CO2 ). However, significant mass transport resistances in the interface region of the membrane electrode assemblies (MEAs), between the membrane and the catalyst layers remains a barrier to achieving MEAs with high power densities and long-term stabilities. Here, a 3D-interfacial zipping concept is presented to overcome this challenge. Vinylbenzyl-terminated bi-cationic quaternary-ammonium-based polyelectrolyte is employed as both the anionomer in the anion-exchange membrane (AEM) and catalyst layers. A quaternary-ammonium-containing covalently locked interface is formed by thermally induced inter-crosslinking of the terminal vinyl groups. Ex situ evaluation of interfacial bonding strength and in situ durability tests demonstrate that this 3D-zipped interface strategy prevents interfacial delamination without any sacrifice of fuel cell performance. A H2 /O2 AEMFC test demonstration shows promisingly high power densities (1.5 W cm-2 at 70 °C with 100% RH and 0.2 MPa backpressure gas feeds), which can retain performances for at least 120 h at a usefully high current density of 0.6 A cm-2 .
RESUMO
Highly cation permselective metal-organic framework (MOF) membranes are desirable for the extraction of valuable metal cations. However, fabrication of defect-free and stable permselective MOF membranes is technically challenging, owing to their arduous self-assembly and poor water resistance, respectively. A simple and readily scalable method has been developed for the controlled inâ situ smart growth of UiO-66-NH2 into leaf-like nanostructures with tunable density of the leaves and the surface layer thickness. The self-assembly approach reproducibly fabricates seamless, ultrathin (<500â nm) UiO-66-NH2 membranes at the surface of anodic aluminum oxide. The membranes contain nanosized interstices among the MOF leaves, which enable maximum admission of ions within the membrane, and angstrom-sized inherent pores in every single UiO-66-NH2 crystal, which efficiently regulate the cation permselectivity. Consequently, the highest ever reported cation separations (Na+ /Mg2+ >200 and Li+ /Mg2+ >60) and excellent membrane stability during five sequential electrodialysis cycles are achieved. These characteristics position the fabricated MOF membranes as potential candidates for efficient extraction of pure lithium and sodium ions from salt lakes and seawater, respectively.