RESUMO
High- (and medium-) entropy alloys have emerged as potentially suitable structural materials for nuclear applications, particularly as they appear to show promising irradiation resistance. Recent studies have provided evidence of the presence of local chemical order (LCO) as a salient feature of these complex concentrated solid-solution alloys. However, the influence of such LCO on their irradiation response has remained uncertain thus far. In this work, we combine ion irradiation experiments with large-scale atomistic simulations to reveal that the presence of chemical short-range order, developed as an early stage of LCO, slows down the formation and evolution of point defects in the equiatomic medium-entropy alloy CrCoNi during irradiation. In particular, the irradiation-induced vacancies and interstitials exhibit a smaller difference in their mobility, arising from a stronger effect of LCO in localizing interstitial diffusion. This effect promotes their recombination as the LCO serves to tune the migration energy barriers of these point defects, thereby delaying the initiation of damage. These findings imply that local chemical ordering may provide a variable in the design space to enhance the resistance of multi-principal element alloys to irradiation damage.
RESUMO
Dynamic access to quasi-bound states in the continuum (q-BICs) offers a highly desired platform for silicon-based active nanophotonic applications, while the prevailing tuning approaches by free carrier injections via an all-optical stimulus are yet limited to THz and infrared ranges and are less effective in visible bands. In this work, we present the realization of active manipulations on q-BICs for nanoscale optical switching in the visible by introducing a local index perturbation through a photothermal mechanism. The sharp q-BIC resonance exhibits an ultrasensitive susceptibility to the complex index perturbation, which can be flexibly fulfilled by optical heating of silicon. Consequently, a mild pump intensity of 1 MW/cm2 can yield a modification of the imaginary part of the refractive index of less than 0.05, which effectively suppresses the sharp q-BIC resonances and renders an active modulation depth of reflectance exceeding 80%. Our research might open up an enabling platform for ultrasensitive dynamic nanophotonic devices.
RESUMO
During recent decades, methylene-bridged macrocyclic arenes have been widely used in supramolecular chemistry. However, their π-conjugations are very weak, as the methylene bridges disrupt the electronic communication between π orbitals of the aromatic units. Herein, we successfully synthesized a series of silapillar[n]arenes (n = 4, 6, and 8) using silylene bridging. These showed enhanced electronic conjugation compared with the parent pillar[n]arenes because of σ*-π* conjugation between σ* (Si-C) orbitals and π* orbitals of the benzenes. Owing to the longer Si-C bond compared with the C-C bond, silylene-bridging provides additional structural flexibility into the pillar[n]arene scaffolds; a strained silapillar[4]arene was formed, which is unavailable in the parent pillar[n]arenes because of the steric requirements. Furthermore, silapillar[n]arenes displayed interesting size-dependent structural and optical properties.
RESUMO
There is an urgent need for low-cost, resource-friendly, high-energy-density cathode materials for lithium-ion batteries to satisfy the rapidly increasing need for electrical energy storage. To replace the nickel and cobalt, which are limited resources and are associated with safety problems, in current lithium-ion batteries, high-capacity cathodes based on manganese would be particularly desirable owing to the low cost and high abundance of the metal, and the intrinsic stability of the Mn4+ oxidation state. Here we present a strategy of combining high-valent cations and the partial substitution of fluorine for oxygen in a disordered-rocksalt structure to incorporate the reversible Mn2+/Mn4+ double redox couple into lithium-excess cathode materials. The lithium-rich cathodes thus produced have high capacity and energy density. The use of the Mn2+/Mn4+ redox reduces oxygen redox activity, thereby stabilizing the materials, and opens up new opportunities for the design of high-performance manganese-rich cathodes for advanced lithium-ion batteries.
RESUMO
Pillar[n]arenes can be constructed using a Friedel-Crafts alkylation process. However, due to the reversible nature of the alkylation, mixture of large pillar[n]arenes (n≥7) are obtained as minor products, and thus laborious purification are necessary to isolate the larger pillar[n]arenes. Moreover, inert methylene bridges are introduced during the alkylation process, and the multi-functionalization of the bridges has never been investigated. Herein, an irreversible Friedel-Crafts acylation is used to prepare pillar[n]arenes. Due to the irreversible nature of the acylation, the reaction of precursors bearing carboxylic acids and electron-rich arene rings results in a size-exclusive formation of pillar[n]arenes, in which the ring-size is determined by the precursor length. Because of this size-selective formation, laborious separation of undesired macrocycles is not necessary. Moreover, the bridges of pillar[n]arenes are selectively installed with reactive carbonyl groups using the acylation method, whose positions are determined by the precursor used. The carbonyl bridges can be easily converted into versatile functional groups, leading to various laterally modified pillar[n]arenes, which cannot be accessed by the alkylation strategy.
RESUMO
The tremendous improvement in performance and cost of lithium-ion batteries (LIBs) have made them the technology of choice for electrical energy storage. While established battery chemistries and cell architectures for Li-ion batteries achieve good power and energy density, LIBs are unlikely to meet all the performance, cost, and scaling targets required for energy storage, in particular, in large-scale applications such as electrified transportation and grids. The demand to further reduce cost and/or increase energy density, as well as the growing concern related to natural resource needs for Li-ion have accelerated the investigation of so-called "beyond Li-ion" technologies. In this review, we will discuss the recent achievements, challenges, and opportunities of four important "beyond Li-ion" technologies: Na-ion batteries, K-ion batteries, all-solid-state batteries, and multivalent batteries. The fundamental science behind the challenges, and potential solutions toward the goals of a low-cost and/or high-energy-density future, are discussed in detail for each technology. While it is unlikely that any given new technology will fully replace Li-ion in the near future, "beyond Li-ion" technologies should be thought of as opportunities for energy storage to grow into mid/large-scale applications.
RESUMO
Pillar[n]arenes are pillar-shaped macrocyclic compounds owing to the methylene bridges linking the para-positions of the units. Owing to their unique pillar-shaped structures, these compounds exhibit various excellent properties compared with other cyclic host molecules, such as versatile functionality using various organic synthesis techniques, substituent-dependent solubility, cavity-size-dependent host-guest properties in organic media, and unit rotation along with planar chiral inversion. These advantages have enabled the high-yield synthesis and rational design of pillar[n]arene-based mechanically interlocked molecules (MIMs). In particular, new types of pillar[n]arene-based MIMs that can dynamically convert between interlocked and unlocked states through unit rotation have been produced. The highly symmetrical pillar-shaped structures of pillar[n]arenes result in simple NMR spectra, which are useful for studying the motion of pillar[n]arene wheels in MIMs and creating sophisticated MIMs with higher-order structures. The creation and application of polymeric MIMs based on pillar[n]arenes is also discussed.
RESUMO
Herein we report a two-directional cyclization strategy for the synthesis of highly strained depth-expanded oxygen-doped chiral molecular belts of the zigzag-type. From the easily accessible resorcin[4]arenes, an unprecedented cyclization cascade generating fused 2,3-dihydro-1H-phenalenes has been developed to access expanded molecular belts. Stitching up the fjords through intramolecular nucleophilic aromatic substitution and ring-closing olefin metathesis reactions furnished a highly strained O-doped C2 -symmetric belt. The enantiomers of the acquired compounds exhibited excellent chiroptical properties. The calculated parallelly aligned electric (µ) and magnetic (m) transition dipole moments are translated to the high dissymmetry factor (|glum | up to 0.022). This study provides not only an appealing and useful strategy for the synthesis of strained molecular belts but also a new paradigm for the fabrication of belt-derived chiroptical materials with high CPL activities.
RESUMO
Controlling bottom-up syntheses from chiral seeds to construct architectures with specific chiralities is currently challenging. Herein, a twisted chiral cavitand with 5-fold symmetry was constructed by bottom-up synthesis using corannulene as the chiral seed and pillar[5]arene as the chiral wall. After docking between the seed and the wall, their dynamic chiralities (M and P) are fixed. Moreover, the formed hedges also exhibit M and P chirality. Through dynamic covalent bonding, the thermodynamically stable product is obtained selectively as a pair of enantiomers (MMM and PPP), where all three subcomponents, i.e., the corannulene, hedges, and pillar[5]arene, are tilted in the same direction. Furthermore, the twisted cavitand exhibits length-selective binding to alkylene dibromides, with three maximum binding constants being unexpectedly observed.
Assuntos
Calixarenos , Gastrópodes , Animais , Éteres CíclicosRESUMO
Abstract: The grand challenge of "net-zero carbon" emission calls for technological breakthroughs in energy production. The traveling wave reactor (TWR) is designed to provide economical and safe nuclear power and solve imminent problems, including limited uranium resources and radiotoxicity burdens from back-end fuel reprocessing/disposal. However, qualification of fuels and materials for TWR remains challenging and it sets an "end of the road" mark on the route of R&D of this technology. In this article, a novel approach is proposed to maneuver reactor operations and utilize high-temperature transients to mitigate the challenges raised by envisioned TWR service environment. Annular U-50Zr fuel and oxidation dispersion strengthened (ODS) steels are proposed to be used instead of the current U-10Zr and HT-9 ferritic/martensitic steels. In addition, irradiation-accelerated transport of Mn and Cr to the cladding surface to form a protective oxide layer as a self-repairing mechanism was discovered and is believed capable of mitigating long-term corrosion. This work represents an attempt to disruptively overcome current technological limits in the TWR fuels. Impact statement: After the Fukushima accident in 2011, the entire nuclear industry calls for a major technological breakthrough that addresses the following three fundamental issues: (1) Reducing spent nuclear fuel reprocessing demands, (2) reducing the probability of a severe accident, and (3) reducing the energy production cost per kilowatt-hour. An inherently safe and ultralong life fast neutron reactor fuel form can be such one stone that kills the three birds. In light of the recent development findings on U-50Zr fuels, we hereby propose a disruptive, conceptual metallic fuel design that can serve the following purposes at the same time: (1) Reaching ultrahigh burnup of above 40% FIMA, (2) possessing strong inherent safety features, and (3) extending current limits on fast neutron irradiation dose to be far beyond 200 dpa. We believe that this technology will be able to bring about revolutionary changes to the nuclear industry by significantly lowering the operational costs as well as improving the reactor system safety to a large extent. Supplementary information: The online version contains supplementary material available at 10.1557/s43577-022-00420-4.
RESUMO
In the synthesis of inorganic materials, reactions often yield non-equilibrium kinetic byproducts instead of the thermodynamic equilibrium phase. Understanding the competition between thermodynamics and kinetics is a fundamental step towards the rational synthesis of target materials. Here, we use in situ synchrotron X-ray diffraction to investigate the multistage crystallization pathways of the important two-layer (P2) sodium oxides Na0.67MO2 (M = Co, Mn). We observe a series of fast non-equilibrium phase transformations through metastable three-layer O3, O3' and P3 phases before formation of the equilibrium two-layer P2 polymorph. We present a theoretical framework to rationalize the observed phase progression, demonstrating that even though P2 is the equilibrium phase, compositionally unconstrained reactions between powder precursors favour the formation of non-equilibrium three-layered intermediates. These insights can guide the choice of precursors and parameters employed in the solid-state synthesis of ceramic materials, and constitutes a step forward in unravelling the complex interplay between thermodynamics and kinetics during materials synthesis.
RESUMO
Hydrocarbon belts including fully conjugated beltarenes and their (partially) saturated analogs have fascinated chemists for decades due to their aesthetic structures, tantalizing properties, and potential applications in supramolecular chemistry and carbon nanoscience and nanotechnology. However, synthesis of hydrocarbon belts still remains a formidable challenge. We report in this communication a general approach to hydrocarbon belts and their derivatives. Closing up all four fjords of resorcin[4]arene derivatives through multiple intramolecular Friedel-Crafts alkylation reactions in an operationally simple one-pot reaction manner enabled efficient construction of octohydrobelt[8]arenes. Synthesis of belt[8]arene from DDQ-oxidized aromatization of octohydrobelt[8]arene under different conditions resulted in aromatization and simultaneous [4 + 2] cycloaddition reactions with DDQ or TCNE to produce selectively tetrahydrobelt[8]arene-DDQ2, tetrahydrobelt[8]arene-TCNE2, and belt[8]arene-DDQ4 adducts. Formation of belt[8]arene, a fully conjugated hydrocarbon belt, was observed from retro-Diels-Alder reaction of a belt[8]arene-DDQ4 adduct with laser irradiation under MALDI conditions. The new and practical synthetic method established would open an avenue to create belt-shaped molecules from easily available starting materials.
RESUMO
Linearly fused hydrocarbon nanobelts are a unique type of double-stranded macrocycles that would serve as not only the powerful hosts in supramolecular science but also the templates to grow zig-zag carbon nanotubes with defined diameters. Fully conjugated hydrocarbon nanobelts such as belt[n]arenes would also possess unique physical and chemical properties. Despite the importance, both fully conjugated and (partially) saturated hydrocarbon nanobelts remain largely unexplored because of the lack of cyclization methods. Reported here is the construction of nanometer sized H12 -belt[12]arenes based on the strategy to close up all fjords of resorcin[6]arene by means of six-fold intramolecular alkylation reactions of resorcin[6]arene derivatives. All resulting H12 -belt[12]arenes produce a very similar nanobelt core structure with six benzene rings and six boat 1,4-cyclohexadiene rings being alternately linear-fused to give a nearly equilateral hexagonal cylinder. The average long diagonal is around 1â nm and the height of the cylinder is about 0.3â nm. The acquired H12 -belt[12]arenes would be the potential precursors to various hydrocarbon nanobelts including fully conjugated belt[12]arenes.
RESUMO
Despite the aesthetically appealing structures and tantalizing physical and chemical properties, zigzag hydrocarbon belts and their heteroatom-embedded analogues remain challenging synthetic targets. We report herein the synthesis of diverse O/N-doped zigzag hydrocarbon belts based on selective bridging of the fjords of resorcin[4]arene derivatives through intramolecular SN Ar and palladium-catalyzed intermolecular C-N bond formation reactions. Preorganized conformations of mono-macrocyclic, half-belt and quasi-belt compounds were revealed to facilitate cyclization reactions to construct heteroatom-linked octahydrobelt[8]arenes. The acquired products had strained square-prism-shaped belt structures in which all six-membered heterocyclic rings adopted an unusual boat conformation with equatorially configured alkyl groups. The unprecedented heteroatom-bearing belts also exhibited different photophysical and redox properties to those of octahydrobelt[8]arene analogues.
RESUMO
Electron spin plays important roles in determining the physical and chemical properties of matter. However, measurements of electron spin are of poor quality, impeding the development of material sciences, because the spin polarimeter has a low efficiency. Here, we show an imaging-type exchange-scattering spin polarimeter with 6786 channels and an 8.5×10^{-3} single channel efficiency. As a demonstration, the fine spin structure of the electronic states in bismuth (111) is investigated, for which strong Rashba-type spin splitting behavior is seen in both the bulk and surface states. This improvement paves the way to study novel spin related phenomena with unprecedented accuracy.
RESUMO
Schistosomiasis japonicum is one of the most serious communicable diseases, and the transmission of the parasite is dependent of its complex life cycle on which many factors can have an impact. Multiple infections comprising both male and female schistosome within snail intermediate hosts, for example, would facilitate parasite transmission. However, no research on Schistosoma japonicum communities in field-collected Oncomelania hupensis hupensis in relation to schistosome sex has been reported. Therefore, snail survey was performed in a hilly region of Anhui, China, and single- or mixed-sex schistosome infections of snails were detected with final host mouse infection. A total of 8,563 snails were sampled in the field, and 67 were identified with schistosome infections. Of these infected snails, 46 were selected for final host infection. From this, 21 snails were infected with female schistosome, 23 with males and 2 with both males and females. More worms were recovered for snails with mixed-sex infections than with single-sex infection and for snails with male schistosome infection than with female infection (P<0.001). The observed frequency of mixed-sex infections of snails was significantly higher than would be expected if randomly distributed (P<0.01). The ratio male/female of schistosome infections in snails was nearly equal and up to 95.65 % (44/46) of infected snails were single-sex infection. Schistosome infections in snails collected from the hilly area of Anhui Province were not randomly distributed but over-dispersed.
Assuntos
Schistosoma japonicum/fisiologia , Caramujos/parasitologia , Animais , China , Feminino , Masculino , Camundongos , Schistosoma japonicum/anatomia & histologia , Schistosoma japonicum/isolamento & purificaçãoRESUMO
Interstitial diffusion is important for radiation defect evolution in zirconium alloys. This study employed molecular dynamics simulations to investigate interstitial diffusion in α-Zr and its alloys with 1.0 at.% Nb and 1.0 at.% Sn using a variety of interatomic potentials. Pronounced differences in diffusion anisotropy were observed in pure Zr among the employed potentials. This was attributed to the considerable differences in migration barriers among the various interstitial configurations. The introduction of small concentrations of Nb and Sn solute atoms was found to significantly influence diffusion anisotropy by either directly participating in the diffusion process or altering the chemical environment around the diffusing species. Based on the moderate agreement of interstitial energetics in pure Zr, accurately describing interstitial diffusion in Zr alloys is expected to be more complex. This work underscores the importance of the careful validation and selection of interatomic potentials and highlights the need to understand the effects of solute atoms on interstitial diffusion.
RESUMO
Despite the potentially higher energy density and improved safety of solid-state batteries (SSBs) relative to Li-ion batteries, failure due to Li-filament penetration of the solid electrolyte and subsequent short circuit remains a critical issue. Herein, we show that Li-filament growth is suppressed in solid-electrolyte pellets with a relative density beyond ~95%. Below this threshold value, however, the battery shorts more easily as the density increases due to faster Li-filament growth within the percolating pores in the pellet. The microstructural properties (e.g., pore size, connectivity, porosity, and tortuosity) of [Formula: see text] with various relative densities are quantified using focused ion beam-scanning electron microscopy tomography and permeability tests. Furthermore, modeling results provide details on the Li-filament growth inside pores ranging from 0.2 to 2 µm in size. Our findings improve the understanding of the failure modes of SSBs and provide guidelines for the design of dendrite-free SSBs.
RESUMO
The magnetic field configuration of the previously proposed knot undulator [Qiao et al. (2009). Rev. Sci. Instrum. 80, 085108] is realised in the design of a hybridized elliptically polarized undulator, which is presented. Although the details of the field distribution are not the same as those in the theoretical proposal, it is demonstrated that the practical knot undulator could work perfectly. In order to understand the minor discrepancies of the two, mathematical formulae of the synchrotron radiation are derived based on the Fourier transform of the magnetic field. From the results of calculations by simulation program, the discrepancies could be well interpreted by the corresponding formulae. The results show the importance of optimization of the end sections of the knot undulator to suppress the on-axis heat load. Furthermore, a study of the impact of the undulator on beam dynamics of the storage ring was conducted using the Shanghai Synchrotron Radiation Facility as an example and the results show that the knot undulator has little effect on the beam.
RESUMO
Objective: To explore the percutaneous hollow screw internal fixation combined with cementoplasty in the treatment of periacetabular metastasis. Methods: A retrospective study was performed on 16 patients with periacetabular metastasis who were treated with percutaneous hollow screw internal fixation combined with cementoplasty between May 2020 and May 2021. There were 9 males and 7 females. The age ranged from 40 to 73 years, with an average of 53.6 years. The tumor involved around the acetabulum, and 6 cases were located on the left and 10 cases on the right. Operation time, frequency of fluoroscopy, bed rest time, and complications were recorded. Before operation, and at 1 weeks, 3 months after operation, the visual analogue scale (VAS) score was used to evaluate the pain degree, the short-form 36 health survey scale (SF-36) score was used to evaluate the quality of life. At 3 months after operation, the Musculoskeletal Tumor Society (MSTS) scoring system was used to evaluate the functional recovery of patients. During follow-up, the loosening of internal fixator and bone cement leakage were observed by X-ray film. Results: All patients were performed operation successfully. The operation time ranged from 57 to 82 minutes, with an average of 70.4 minutes. The frequency of intraoperative fluoroscopy was 16-34 times, with an average of 23.1 times. After operation, 1 case of incision hematoma and 1 case of scrotal edema occurred. All patients felt the pain relieved after operation. The patients started walking at 1-3 days after operation, with an average of 1.4 days. All patients were followed up 6-12 months (mean 9.7 months). The VAS and SF-36 scores significantly improved after operation when compared with the preoperative scores, and the scores at 3 months after operation were significant better than those at 1 week after operation ( P<0.05). At 3 months after operation, the MSTS score ranged from 9 to 27, with an average of 19.8. Among them, 3 cases were excellent (18.75%), 8 cases were good (50%), 3 cases were fair (18.75%), and 2 cases were poor (12.5%). The excellent and good rate was 68.75%. And 11 patients returned to normal walking, 3 had mild claudication, and 2 had obvious claudication. Radiological examination showed that there were 2 cases of bone cement leakage after operation, and there was no internal fixator loosening or displacement. Conclusion: Percutaneous hollow screw internal fixation combined with cementoplasty can effectively relieve pain and improve the quality of life of patients with periacetabular metastasis.