Cu-MOFs with Rich Open Metal and F Sites for Separation of C2H2 from CO2 and CH4.

Herein, we used the 4-fluoro-[1,1'-biphenyl]-3,4',5-tricarboxylic acid (H3fbptc) ligand to design and construct a new metal-organic framework (MOF), [Cu3(fbptc)2(H2O)3]·3NMP (1), which possesses rich accessible metal sites and F functional groups in the porous walls and shows high uptake for C2H2 (119.3 cm3 g-1) and significant adsorption selectivity for C2H2 over CH4 (14.4) and CO2 (3.6) at 298 K and 100 kPa. In particular, for the gas mixtures of C2H2-CH4 and C2H2-CO2, the MOF reveals large breakthrough time ratios (C2H2/CH4 = 13, C2H2/CO2 = 5.9), which are particularly prominent in dynamic breakthrough experiments, also confirming the excellent potential for the practical separation of C2H2 from two-component mixtures (C2H2-CH4 and C2H2-CO2) and even three-component mixtures (C2H2-CO2-CH4).

One Co-MOF with F Active Sites for Separation of C2H2 from CO2, C2H4, and CH4.

Separating acetylene (C2H2) from other light hydrocarbons and carbon dioxide (CO2) mixtures under mild conditions poses significant challenges due to the remarkably similar properties between C2H2 and those gases. For the goal of C2H2 separation, a F-functionalized organic linker, H2F-PyIP = 2-fluorine-5-(4-pyridyl)isophthalic acid, was designed, and the corresponding metal-organic framework (MOF), {[Co2(F-PyIP)2DMF]·4H2O}n (1), was constructed. The MOF with open channels decorated by the active sites of the F groups revealed the exceptional C2H2 uptake and selectivity over CO2, C2H4, and CH4. The breakthrough experiments with different molar ratios of C2H2-C2H4, C2H2-CO2, and other gas mixtures further verified superior separation capacity of the MOF. In particular, the dynamic separation time intervals for gas mixtures (C2H2/CO2 = 1:1, 1:5, 1:10, and 1:20) fell in the range 30-44 min, highlighting the potential of the MOF for tackling the challenging C2H2/CO2 separation process.

Active Sites Decorated Nonpolar Pore-Based MOF for One-step Acquisition of C2 H4 and Recovery of C3 H6.

Herein, a 2-fold interpenetrated metal-organic framework (MOF) Zn-BPZ-TATB with accessible N/O active sites in nonpolar pore surfaces was reported for one-step C2 H4 purification from C2 H6 or C3 H6 mixtures as well as recovery of C3 H6 from C2 H6 /C3 H6 /C2 H4 mixtures. The MOF exhibits the favorable C2 H6 and C3 H6 uptakes (>100 cm3 g-1 at 298 K under 100 kPa) as well as selective adsorption of C2 H6 and C3 H6 over C2 H4 . The C3 H6 - and C2 H6 -selective feature were investigated detailedly by experimental tests as well as sorption kinetic studyies. Molecular modelling revealed the multiple interactions between C3 H6 or C2 H6 molecules and methyl groups as well as triazine rings in pores. Zn-BPZ-TATB not only can directly generate 323.4 L kg-1 and 15.4 L kg-1 of high-purity (≥99.9 %) C2 H4 from C3 H6 /C2 H4 and C2 H6 /C2 H4 mixtures, but also provide a large high-purity (≥99.5 %) C3 H6 recovery capacity of 60.1 L kg-1 from C3 H6 /C2 H4 mixtures. More importantly, the high-purity C3 H6 (≥99.5 %) and C2 H4 (≥99.9 %) with the productivities of 38.2 and 12.7 L kg-1 can be simultaneously obtained from C2 H6 /C3 H6 /C2 H4 mixtures through a single adsorption/desorption cycle.

One-Step C2 H4 Purification from Ternary C2 H6 /C2 H4 /C2 H2 Mixtures by a Robust Metal-Organic Framework with Customized Pore Environment.

One-step C2 H4 purification from ternary C2 H6 /C2 H4 /C2 H2 mixtures by a single adsorbent is of great industrial significance, but few adsorbents achieve this separation. Herein, we report a robust metal-organic framework (MOF) that possesses methyl-decorated nonpolar pores and shows one-step C2 H4 purification (purity >99.9 %) from binary C2 H6 /C2 H4 mixtures and ternary C2 H6 /C2 H4 /C2 H2 mixtures. The methyl groups in pores provide a suitable pore environment to simultaneously enhance the adsorption capacity for C2 H2 and C2 H6 compared to C2 H4 . Simulations revealed the multiple interactions between C2 H6 or C2 H2 molecules and the pore wall, while the interactions with C2 H4 molecules are weak and also unfavorable due to the repulsion from methyl groups in pores. The MOF displays high C2 H6 and C2 H2 uptakes and benchmark C2 H6 /C2 H4 selectivity (2.2), surpassing all of the reported MOFs for one-step C2 H4 purification from ternary C2 H6 /C2 H4 /C2 H2 mixtures.

Boosting Ethane/Ethylene Separation by MOFs through the Amino-Functionalization of Pores.

Adsorption technology based on ethane-selective materials is a promising alternative to energy-intensive cryogenic distillation for separating ethane (C2 H6 ) and ethylene (C2 H4 ). We employed a pore engineering strategy to tune the pore environment of a metal-organic framework (MOF) through organic functional groups and boosted the C2 H6 /C2 H4 separation of the MOF. Introduction of amino (-NH2 ) groups into Tb-MOF-76 not only decreased pore sizes but also facilitated multiple guest-host interactions in confined pores. The NH2 -functionalized Tb-MOF-76(NH2 ) has increased C2 H6 and C2 H4 uptakes and C2 H6 /C2 H4 selectivity. The results of experimental and simulated transient breakthroughs reveal that Tb-MOF-76(NH2 ) has significantly improved one-step separation performance for C2 H6 /C2 H4 mixtures with a high C2 H4 (>99.95 %) productivity of 17.66 L kg-1 compared to 7.53 L kg-1 by Tb-MOF-76, resulting from the suitable pore confinement and accessible -NH2 groups on pore surfaces.

Nonenzymatic Glucose Sensing and Magnetic Property Based On the Composite Formed by Encapsulating Ag Nanoparticles in Cluster-Based Co-MOF.

Utilizing the oxygen-bridged 5,5'-oxidiisophthalic acid (H4L) linker, one Co(II)-based 3D porous MOF {[Co5(L)2(OH)2(OH2)2(H2O)4]·2DMF·H2O}n (1) with pentanuclear [Co5(µ3-OH)2(µ2-OH2)2]8+ cluster was prepared. The glassy carbon electrode was modified by 1, and the obtained electrode revealed electrocatalytic performance for glucose oxidation. The porous MOF matrix is beneficial for dispersing Ag nanoparticles evenly in the interior cages or channels, so Ag@1 composite composed of both Ag nanoparticles and MOF was further prepared through deposition-reduction method to enhance electrocatalytic activity. The result demonstrates that the glucose oxidation by Ag@1 was greatly increased with low detection limit (1.32 µM) and good selectivity and sensitivity (0.135 µA µM-1), which promote the application of MOF-template porous composites as advanced electrochemical sensor materials. Furthermore, 1 shows an interesting magnetic spin-glass slow dynamics for the existing of peculiar pentanuclear Co(II) clusters.

Ligand Configuration-Induced Manganese(II) Coordination Polymers: Syntheses, Crystal Structures, Sorption, and Magnetic Properties.

Three new coordination polymers, {[Mn3(pzbtz)2(Cl)2(H2O)2]·4H2O}n (1), {Mn2(pzbtz)(SO4)(H2O)3]·3H2O}n (2), and {[Mn3(pzbtz)3(H2O)3]·1.5DMA·2H2O}n (3), have been solvothermally synthesized with MnCl2/MnSO4 and a bitriazole ligand, 5'-(pyrazin-2-yl)-2H,4'H-3,3'-bi(1,2,4-triazole) (H2pzbtz), in different solvent systems. H2pzbtz shows different geometrical configurations and coordination modes, leading to the diverse three-dimensional (3D) frameworks of 1-3. Complex 1 contains the trinuclear Mn3(tr)4X2 (X = Cl or H2O) clusters and reveals an unobserved (3,4,8)-connected sqc929 topological framework with two types of cages. Complex 2 is a new (3,4,6)-connected network based on dinuclear Mn2(tr)2 clusters, and 3 shows an 8-connected bcu topology with a novel tetranuclear Mn4(tr)6 cluster. Complexes 1 and 2 show antiferromagnetic properties, while 3 reveals spin-canting magnetic behavior with an uncommonly high Tc around 44 K. In addition, 1 also possesses good adsorption selectivity for CO2 over CH4 and N2 and an uncommon gate-opening phenomenon.

A Cationic MOF with High Uptake and Selectivity for CO2 due to Multiple CO2 -Philic Sites.

The reaction of N-rich pyrazinyl triazolyl carboxyl ligand 3-(4-carboxylbenzene)-5-(2-pyrazinyl)-1H-1,2,4-triazole (H2 cbptz) with MnCl2 afforded 3D cationic metal-organic framework (MOF) [Mn2 (Hcbptz)2 (Cl)(H2 O)]Cl⋅DMF⋅0.5 CH3 CN (1), which has an unusual (3,4)-connected 3,4T1 topology and 1D channels composed of cavities. MOF 1 has a very polar framework that contains exposed metal sites, uncoordinated N atoms, narrow channels, and Cl(-) basic sites, which lead to not only high CO2 uptake, but also remarkably selective adsorption of CO2 over N2 and CH4 at 298-333 K. The multiple CO2 -philic sites were identified by grand canonical Monte Carlo simulations. Moreover, 1 shows excellent stability in natural air environment. These advantages make 1 a very promising candidate in post-combustion CO2 capture, natural-gas upgrading, and landfill gas-purification processes.

A new porous MOF with two uncommon metal-carboxylate-pyrazolate clusters and high CO2/N2 selectivity.

By a less-exploited strategy, a stable framework was constructed by using 4,4'-biphenyldicarboxylic acid (H2bpdc) and methyl-functionalized 3,3',5,5'-tetramethyl-4,4'-bipyrazole (H2bpz) coligands, revealing a new (6,8)-connected net based on two extremely rare trinuclear and tetranuclear metal-carboxylate-pyrazolate clusters. The framework is very porous and possesses not only high CO2 loadings but also very high CO2/N2 selectivities at 308 and 313 K because of the polar pore surface decorated by clusters, pyrazolyl units, and confined cages with methyl groups dangling. Importantly, GCMC simulation identified two favorable CO2 sorption sites located sequentially near Co3(pz)3 and Co3(CO2)2(pz) motifs of the tetranuclear cluster, and the multipoint framework-CO2 interactions were distinguished. The framework also displays remarkable stability toward water and organic solvents.

Solvent or temperature induced diverse coordination polymers of silver(I) sulfate and bipyrazole systems: syntheses, crystal structures, luminescence, and sorption properties.

Three new coordination polymers, [Ag4(H2bpz)4(SO4)2]·H2O (1), [Ag2(H2bpz)2(SO4)]·3H2O (2), and [Ag3(H2bpz)4](SO4)2/3(OH)5/3·4H2O (3) have been solvothermally synthesized with Ag2SO4 and flexible ligand 3,3',5,5'-tetramethyl-4,4'-bipyrazole (H2bpz) in different solvents and temperatures. Complex 1 is a 2-fold interpenetrated three-dimensional (3D) framework with an uncommon (3,5)-connected hms topology. Complex 2 is a structural isomer of 1 and shows a three-connected 2D ths net consisting of interesting 3-fold and 2-fold heterochiral helical chains. Complex 3 discloses a grid layer structure, containing heterochiral helical chains and an unusual meso-helix. More interestingly, three sets of layers in 3 stack in different directions, affording an unprecedented 2D + 2D + 2D → 3D polycatenating cationic framework with 1D + 3D porous systems. In 1-3, H2bpz exhibit exobidentate bridging fashions with wide-ranged interpyrazole tilting angles and changeable coordination configurations, such as cis and trans fashions in 1 and 3 and uniform trans fashion in 2. These lead to the isomeric [Ag(H2bpz)]n arrays of wavelike and helical chains in 1 and 2, respectively. Complexes 1-3 display solid-state photoluminescence stemming from the ligand-centered fluorescent emissions of H2bpz. Because of the highly polar framework, 3 shows excellent adsorption selectivity for CO2 over N2.

TXNIP knockout improves cardiac function after myocardial infarction by promoting angiogenesis and reducing cardiomyocyte apoptosis.

Background: Myocardial infarction (MI) is a common cause of death. Thioredoxin-interacting protein (TXNIP) expression increases after MI, and it exerts a negative regulatory effect on cardiac function after MI. Our study aimed to investigate the specific regulatory mechanism of TXNIP on angiogenesis and cardiomyocyte apoptosis after MI. Methods: The TXNIP gene knock-in (TXNIP-KI) and knock-out (TXNIP-KO) mice were generated, respectively. Eight-week-old male TXNIP-KO, TXNIP-KI, and wild type (WT) mice were subjected to MI by permanent ligation of the left anterior descending artery. Cardiomyocyte apoptosis was detected by TUNEL assay on the 4th post-surgery day. The expressions of TXNIP, hypoxia-inducible factor-1α (HIF-1α), vascular endothelial growth factor (VEGF), phosphorylated protein kinase B (p-AKT), p-AMP-activated protein kinase (p-AMPK), cleaved caspase-3, and caspase-3 were detected by Western blot. Quantitative real-time PCR was performed to detect the expression of TXNIP, HIF-1α, VEGF, prolyl hydroxylase (PHD) 1, and factor inhibiting HIF (FIH). In addition, the superoxide dismutase (SOD) activity and malondialdehyde (MDA) level in each group were also measured. On day 7 after MI, the hearts of sacrificed animals were analyzed by immunohistochemistry to assess CD31 expression and determine the density of angiogenesis. One month after treatment, the cardiac functional and structural changes were determined by echocardiography and the level of myocardial fibrosis was observed by Masson staining. Results: Compared with WT mice, TXNIP-KO mice had a significantly improved cardiac functional recovery after MI, and the proportion of myocardial fibrosis area was dramatically reduced, cardiomyocyte apoptosis was decreased, and angiogenesis was significantly increased; TXNIP-KI mice reversed in these changes. The expression of HIF-1α, p-AKT, and p-AMPK increased after MI in TXNIP-KO mice, and the mRNA expression of PHD 1 and FIH decreased. TXNIP-KI mice reversed in these changes. Conclusions: After MI, TXNIP down-regulated the level of HIF-1α and VEGF, reduced the number of angiogenesis, increased cardiomyocyte apoptosis, and ultimately led to a poor prognosis of ischemic myocardium. TXNIP was a protein with negative effects after MI and was expected to be a target for the prevention and treatment of MI.

Trinuclear-based copper(I) pyrazolate polymers: effect of trimer π-acid···halide/pseudohalide interactions on the supramolecular structure and phosphorescence.

Under different situations, solvothermal reactions of 3,5-diethyl-4-(4-pyridyl)-pyrazole (HL) with CuX or CuX(2) (X = Cl, Br, I, and SCN) afforded five copper(I) coordination polymers, {CuX[CuL](3)·solvent}(n) (X = Cl, 1; Br, 2; I, 3; X = SCN and solvent = MeCN, 4) and {Cu(2)I(2)[CuL](3)}(n) (5). X-ray diffraction analyses show that all the complexes have trinuclear [CuL](3) (referred as Cu(3)) secondary building units featuring planar nine-membered Cu(3)N(6) metallocycles with three peripheral pyridyl groups as connectors, which are further linked by CuX or Cu(2)X(2) motifs to generate single- or double-strand chains. Interestingly, the Cu(I) atoms within the Cu(3) units in 1-5 behave as coordinatively unsaturated π-acid centers to contact soft halide/pseudohalide X atoms of CuX and Cu(2)X(2) motifs, which lead to novel sandwich substructures of [(Cu(3))(Cu(2)X(2))(Cu(3))] (X = Br, I, and SCN) in 2-4. In addition, both the π-acid [Cu(3)]···X contacts and intertrimer Cu···Cu interactions contribute to the one-dimensional (1D) double-strand and 2D/3D supramolecular structures of 1-5. All of these complexes exhibit high thermostability and bright solid-state phosphorescence upon exposure to UV radiation at room temperature. The emissions arise from the mixtures of metal-centered charge transfer, metal to ligand charge transfer, and halide-to-ligand charge transfer excited states, and can be tuned by intermolecular π-acid [Cu(3)]···halide/pseudohalide contacts.

A new metal-organic framework based on rare [Zn4F4] cores for efficient separation of C2H2.

Assembly via 1,4-benzenedicarboxylate linkers and Zn2+ ions afforded an MOF containing rare [Zn4F4] cubane core, showing excellent separation for C2H2-CO2 and C2H2-CH4 mixtures. Dynamic breakthrough experiments and grand canonical Monte Carlo calculations were carried out to confirm the feasibility of the MOF for the separation application of C2H2.

Efficient C2Hn Hydrocarbons and VOC Adsorption and Separation in an MOF with Lewis Basic and Acidic Decorated Active Sites.

To help address efficient separation of C2Hn light hydrocarbons and C2H2/CO2 in the chemical industry, the self-assembly via an azolate-carboxylate ligand and Co(II) ion gave rise to a new porous MOF material, [Co(btzip)(H2btzip)]·2DMF·2H2O (1) (H2btzip = 4,6-bis(triazol-1-yl)isophthalic acid). In the MOF, the pores are modified by rich uncoordinated triazolyl Lewis basic N atoms and acidic -COOH groups, which strengthen interactions with C2Hn hydrocarbons and CO2 molecules, leading to high adsorption amounts for C2H2, C2H4, C2H6, and CO2 and remarkable separation efficiency for C2Hn-CH4, CO2-CH4, and C2H2-CO2 mixtures, as confirmed by breakthrough experiments on the realistic gas mixtures. The MOF also reveals outstanding selective adsorption ability for benzene/toluene, methanol/1-propanol, methanol/2-propanol, and 2-propanol/1-propanol isomers. Molecular simulations disclose the different adsorption sites in the MOF for various adsorbates.

The chiral helical structure of a copper(II) complex with a tridentate Schiff base ligand.

In the title salt, catena-poly[[[aquacopper(II)]-mu-3-(2-pyridylmethyleneamino)propanoato-kappa4N,N',O:O'] perchlorate], {[Cu(C9H9N2O2)(H2O)]ClO4}n, the monomeric unit contains a square-based pyramidal Cu(II) centre. The four basal positions are occupied by a tridentate anionic Schiff base ligand which furnishes an NNO-donor set, with the fourth basal position being occupied by an O-donor atom from the carboxylate group of an adjacent Schiff base ligand. The coordination sphere is completed by a water molecule at the apical position. Interestingly, each carboxylate group in the ligand forms a syn-anti-configured bridge between two Cu(II) centres, leading to left-handed chiral helicity. The framework also exhibits O-H...O hydrogen bonds involving the water molecules and an O atom of the perchlorate anion.

catena-Poly[hemi[bis-(4'-phenyl-2,2':6',2''-terpyridine-κN)copper(II)] [cuprate(I)-di-µ(2)-thio-cyanato-κN:S;κS:N]].

Reaction of 4'-phenyl-2,2':6',2''-terpyridine (phtpy), copper acetate hydrate and ammonium thio-cyanate under solvothermal conditions led to the formation of the title compound, {[Cu(C(21)H(15)N(3))(2)][Cu(2)(NCS)(4)]}(n). The structure is composed of discrete [Cu(phtpy)(2)](2+) cations and polymeric anionic {[Cu(SCN)(2)](-)} chains propagating along [010]. The central Cu(2+) ion in the cation is coordinated by two tridentate chelating phtpy ligands in a distorted octa-hedral geometry. In each of the two crystallographically independent centrosymmetric anions, the Cu(I) atoms are bridged in a 1,3-µ(2)-bridging mode by two S and two N atoms, resulting in a distorted tetrahedral CuN(2)S(2) coordination. The [Cu(phtpy)(2)](2+) cations are fixed between these polymers by inter-molecular C-H⋯S hydrogen bonds.

catena-Poly[hemi{bis-[4'-(3-pyrid-yl)-2,2':6',2''-terpyridine-κN,N,N]copper(II)} [cuprate(I)-di-µ(2)-thio-cyanato-κN:S;κS:N]].

The title compound, {[Cu(C(20)H(14)N(4))(2)][Cu(2)(NCS)(4)]}(n), was obtained by reacting copper acetate hydrate, ammonium thio-cyanate and 4'-(3-pyrid-yl)-2,2':6',2''-terpyridine (3-pytpy) under solvothermal conditions. The polymeric complex is isostructural with the 4'-phenyl-2,2':6',2''-terpyridine (phtpy) analogue. All intramolecular distances and angles are very similar for the two structures. Substitution of a phenyl group with a pyridyl group has no significant effect on the crystal packing which is accomplished by C-H⋯N and C-H⋯S hydrogen-bonding interactions.

Tetra-aqua-(1,10-phenanthroline-5,6-dione-κN,N')cobalt(II) dinitrate.

The asymmetric unit of the title compound, [Co(C(12)H(6)N(2)O(2))(H(2)O)(4)](NO(3))(2), consists of a Co(II) complex cation with twofold rotational symmetry and two nitrate anions. The Co(II) atom has a distorted octa-hedral geometry with the basal plane occupied by two 1,10-phenanthroline-5,6-dione N atoms and two aqua O atoms, with the other two aqua ligands in axial positions. The aqua ligands are involved in extensive hydrogen bonding to nitrate and 1,10-phenanthroline-5,6-dione O atoms.

Luminescent and Magnetic Properties of Coordination Polymers Induced by Coordinating Modes of a Bis(oxamate) Ligand.

The reactions of an unexploited N,N'-5-carboxyl-1,3-phenylenebis(ethyl oxamate) (HEt2 L) ligand with different Mn2+ and Cd2+ salts under solvothermal conditions afforded four three-dimensional (3D) coordination polymers (CPs): [Mn1.5 L(H2 O)2 ]⋅H2 O (1) [Mn2 L(C2 O4 )0.5 (NMP)(H2 O)] ⋅ NMP (2), [Cd1.5 L(H2 O)2.5 ] ⋅ H2 O (3) and [Cd2 L(C2 O4 )0.5 (H2 O)3 ] ⋅ H2 O (4) (NMP=N-methyl pyrrolidone). L, generated by the in-situ hydrolysis of HEt2 L, displays four kinds of coordinating modes through oxamate and carboxylate groups as well as different syn-syn and syn-trans configurations. The resulting novel (3,4,5)-, (3,4,6)-, (4,5)- and (4,4,4,5)-connected topologies for 1-4 were formed. Among them, 1 has interesting 1D metal-oxamate zigzag chains, 2 contains 1D channels with a free void of 52.5 %, 3 consists of an unprecedented Cd-oxamate layer, 4 has a novel Cd-oxamate-oxalate chain. The antiferromagnetic interactions of 1 and 2 were observed, meanwhile 3 and 4 exhibit solid-state luminescence with the maximum emission bands at 483 and 479 nm, respectively, under an excitation of 332 nm.

A twofold parallel interpenetration network from the assembly of a flexible spacer and CuI: poly[micro-iodido-micro-4,4'-(methylenedithio)dipyridine-kappa2N:N'-copper(I)].

The title compound, [CuI(C(11)H(10)N(2)S(2))](n), is built around centrosymmetric dinuclear Cu(2)I(2) cores, each of which is linked to four neighboring Cu(2)I(2) units via flexible dithioether ligands, viz. 4,4'-(methylenedithio)dipyridine, to form a two-dimensional grid containing rhombus-shaped cavities with diagonal distances of ca 15 and 22 A. Two of these networks interpenetrate in a woven fashion, and the resulting structure does not possess any open channels or cavities. Each Cu atom is in a distorted tetrahedral coordination environment.