The Detection of Yarn Roll's Margin in Complex Background.

Online detection of yarn roll's margin is one of the key issues in textile automation, which is related to the speed and scheduling of bobbin (empty yarn roll) replacement. The actual industrial site is characterized by uneven lighting, restricted shooting angles, diverse yarn colors and cylinder yarn types, and complex backgrounds. Due to the above characteristics, the neural network detection error is large, and the contour detection extraction edge accuracy is low. In this paper, an improved neural network algorithm is proposed, and the improved Yolo algorithm and the contour detection algorithm are integrated. First, the image is entered in the Yolo model to detect each yarn roll and its dimensions; second, the contour and dimensions of each yarn roll are accurately detected based on Yolo; third, the diameter of the yarn rolls detected by Yolo and the contour detection algorithm are fused, and then the length of the yarn rolls and the edges of the yarn rolls are calculated as measurements; finally, in order to completely eliminate the error detection, the yarn consumption speed is used to estimate the residual yarn volume and the measured and estimated values are fused using a Kalman filter. This method overcomes the effects of complex backgrounds and illumination while being applicable to different types of yarn rolls. It is experimentally verified that the average measurement error of the cylinder yarn diameter is less than 8.6 mm, and the measurement error of the cylinder yarn length does not exceed 3 cm.

Fast and Selective Luminescent Sensing by Langmuir-Schaeffer Films Based on Controlled Assembly of Perylene Bisimide Modified with A Cyclometalated AuIII Complex.

Condensed films of functional luminophores dominated by the magnitude and dimensionality of the intermolecular interactions play important roles in sensing performance. However, controlling the molecular assembly and regulating photophysical properties remain challenging. In this study, a new luminophore, ortho-PBI-Au, was synthesized by anchoring a cyclometalated alkynyl-gold(III) unit at the ortho-position of perylene bisimide. An unprecedented T-type packing model driven by weak Au-π interaction and Au-H bonds was observed, laying foundation for striking properties of the luminophore. Controlled assembly of ortho-PBI-Au at the air-water interface, realized using the classical Langmuir-Schaeffer technique, afforded the obtained luminescent films with different packing structures. With an optimized film, sensitive, selective, and rapid detection of a hazardous new psychoactive substance, phenylethylamine (PEA), was achieved. The detection limit, response time, and recovery time were <4 ppb, <1 s, and <5 s, respectively, surpassing the performance of the PEA sensors known thus far. The relationship between the characters of films and the sensing performance was systematically examined by grey relational analysis (GRA). The present study suggests that designing novel molecular aggregation with definite adlayer structure is a crucial strategy to enhance the sensing performance, which could be favorable for the film-based fluorescent sensors.

[Research Progress on Vector Flow Imaging of Cardiac Ultrasound].

Echocardiogram is vital for the diagnosis of cardiac disease. The heart has complex hemodynamics requiring an advanced ultrasound imaging mode. Cardiac ultrasound vector flow imaging is capable of measuring the actual magnitude and direction of the blood flow velocity, obtaining the quantitative parameters of hemodynamics, and then providing more information for clinical research and diagnosis. This study mainly reviewed several different vector flow imaging techniques for cardiac flow and presented the implementation difficulties, and proposed a diverging wave based high frame rate cardiac ultrasound vector flow imaging. The study discussed the limitation of current ultrasound technology used in the cardiac flow measurement, analyzed and demonstrated the specific reasons for these implementation difficulties and the potential future development.

Retrospective study on the effectiveness of a prevention strategy in a dental hospital during the COVID-19 pandemic.

OBJECTIVES: To evaluate the effectiveness of a prevention strategy against the spread of SARS-CoV-2 infection among dental hospital staff over a 3-month period. MATERIALS AND METHODS: The effectiveness of the prevention strategy, which adopted healthcare staff protective measures, including patient triage and correct usage of personal preventive equipment, was evaluated by SARS-CoV-2 detection and serological testing. Patients who visited the Affiliated Stomatology Hospital, Zhejiang University School of Medicine, Hangzhou, China, between January 31 and March 1 (lockdown period) and March 2 and April 27 (reopening period) in 2020 and in the same period in 2019 were included in the study. Patients' diagnosis, age, gender, and several undergoing aerosol-generating procedures during the study period were collected from the hospital's database. Corresponding data were compared year-on-year (2020-on-2019). A total of 757 hospital staff underwent SARS-CoV-2 detection and serological testing on April 28-29, 2020. RESULTS: During the lockdown and reopening period in 2020, the number of hospital visits was dramatically decreased to about 6% and 58%, respectively, compared with the same period in 2019. However, emergency visits were increased 16- and 6.4-fold. A total of at least 6654 patients (13.58%) underwent aerosol-generating procedures during the study period in the year 2020. All hospital staff were negative according to SARS-CoV-2 detection and serological testing (IgG, IgM) data. CONCLUSION: During the study period in 2020, the total number of hospital visits dramatically reduced but emergency visits significantly increased. The prevention strategy implemented successfully prevented SARS-CoV-2 infection spread among healthcare workers in a dental hospital. CLINICAL RELEVANCE: The prevention strategy indicated patient triage and how to adopt preventive measures for controlling SARS-CoV-2 spread among healthcare workers. These data can be used as a reference for other sectors suffering from the COVID-19 pandemic.

The Detection of Thread Roll's Margin Based on Computer Vision.

The automatic detection of the thread roll's margin is one of the kernel problems in the textile field. As the traditional detection method based on the thread's tension has the disadvantages of high cost and low reliability, this paper proposes a technology that installs a camera on a mobile robot and uses computer vision to detect the thread roll's margin. Before starting, we define a thread roll's margin as follows: The difference between the thread roll's radius and the bobbin's radius. Firstly, we capture images of the thread roll's end surface. Secondly, we obtain the bobbin's image coordinates by calculating the image's convolutions with a Circle Gradient Operator. Thirdly, we fit the thread roll and bobbin's contours into ellipses, and then delete false detections according to the bobbin's image coordinates. Finally, we restore every sub-image of the thread roll by a perspective transformation method, and establish the conversion relationship between the actual size and pixel size. The difference value of the two concentric circles' radii is the thread roll's margin. However, there are false detections and these errors may be more than 19.4 mm when the margin is small. In order to improve the precision and delete false detections, we use deep learning to detect thread roll and bobbin's radii and then can calculate the thread roll's margin. After that, we fuse the two results. However, the deep learning method also has some false detections. As such, in order to eliminate the false detections completely, we estimate the thread roll's margin according to thread consumption speed. Lastly, we use a Kalman Filter to fuse the measured value and estimated value; the average error is less than 5.7 mm.

Generation and probing of 3D helical lattices with tunable helix pitch and interface.

We propose a method for generation of tunable three-dimensional (3D) helical lattices with varying helix pitch. In order to change only the lattice helix pitch, a periodically varying phase along the propagation direction is added to the central beam - one of the interference beams for lattice construction. The phase periodicity determines the helix pitch, which can be reconfigured at ease. Furthermore, a helical lattice structure with an interface (domain wall) is also achieved by changing the phase structure of the lateral beams, leading to opposite rotating direction (helicity) on different sides of the interface. When a Gaussian beam is used to probe the bulk lattice, it can evolve into a spiral beam with its helicity varying in accordance with that of the lattice. Probing along the interface with two dipole-like optical beams leads to unusual propagation dynamics, depending on the phase and size of the two beams. This approach could be further explored for studies of nonlinear interface solitons and topological interface states. In addition, the helical lattices may find applications in dynamical multi-beam optical tweezers.

Automated Measurement of Spatially Resolved Hair-Hair Single Fiber Adhesion.

The adhesion force between individual human hair fibers in a crosshair geometry was measured by observing their natural bending and adhesive jumps out of contact, using optical video microscopy. The hair fibers' natural elastic responses, calibrated by measuring their natural resonant frequencies, were used to measure the forces. Using a custom-designed, automated apparatus to measure thousands of individual hair-hair contacts along millimeter length scales of hair, it was found that a broad, yet characteristic, spatially variant distribution in adhesion force is measured on the 1 to 1000 nN scale for both clean and conditioner-treated hair fibers. Comparison between the measured adhesion forces and adhesion forces modeled from the hairs' surface topography (measured using confocal laser profilometry) shows they have a good order-of-magnitude agreement and have similar breadth and shape. The agreement between the measurements and the model suggests, perhaps unsurprisingly, that hair-hair adhesion is governed, to a first approximation, by the unique surface structure of the hairs' cuticles and, therefore, the large distribution in local mean curvature at the various individual contact points along the hairs' lengths. We posit that haircare products could best control the surface properties (or at least the adhesive properties) between hairs by directly modifying the hair surface microstructure.

Spatial algebraic solitons at the Dirac point in optically induced nonlinear photonic lattices.

The discovery of a new type of soliton occurring in periodic systems is reported. This type of nonlinear excitation exists at a Dirac point of a photonic band structure, and features an oscillating tail that damps algebraically. Solitons in periodic systems are localized states traditionally supported by photonic bandgaps. Here, it is found that besides photonic bandgaps, a Dirac point in the band structure of triangular optical lattices can also sustain solitons. Apart from their theoretical impact within the soliton theory, they have many potential uses because such solitons are possible in both Kerr material and photorefractive crystals that possess self-focusing and self-defocusing nonlinearities. The findings enrich the soliton family and provide information for studies of nonlinear waves in many branches of physics.

Photochemical CVD of Ru on functionalized self-assembled monolayers from organometallic precursors.

Chemical vapor deposition (CVD) is an attractive technique for the metallization of organic thin films because it is selective and the thickness of the deposited film can easily be controlled. However, thermal CVD processes often require high temperatures which are generally incompatible with organic films. In this paper, we perform proof-of-concept studies of photochemical CVD to metallize organic thin films. In this method, a precursor undergoes photolytic decomposition to generate thermally labile intermediates prior to adsorption on the sample. Three readily available Ru precursors, CpRu(CO)2Me, (η3-allyl)Ru(CO)3Br, and (COT)Ru(CO)3, were employed to investigate the role of precursor quantum yield, ligand chemistry, and the Ru oxidation state on the deposition. To investigate the role of the substrate chemistry on deposition, carboxylic acid-, hydroxyl-, and methyl-terminated self-assembled monolayers were used. The data indicate that moderate quantum yields for ligand loss (φ ≥ 0.4) are required for ruthenium deposition, and the deposition is wavelength dependent. Second, anionic polyhapto ligands such as cyclopentadienyl and allyl are more difficult to remove than carbonyls, halides, and alkyls. Third, in contrast to the atomic layer deposition, acid-base reactions between the precursor and the substrate are more effective for deposition than nucleophilic reactions. Finally, the data suggest that selective deposition can be achieved on organic thin films by judicious choice of precursor and functional groups present on the substrate. These studies thus provide guidelines for the rational design of new precursors specifically for selective photochemical CVD on organic substrates.

Regulation of retinal interneuron subtype identity by the Iroquois homeobox gene Irx6.

Interneuronal subtype diversity lies at the heart of the distinct molecular properties and synaptic connections that shape the formation of the neuronal circuits that are necessary for the complex spatial and temporal processing of sensory information. Here, we investigate the role of Irx6, a member of the Iroquois homeodomain transcription factor family, in regulating the development of retinal bipolar interneurons. Using a knock-in reporter approach, we show that, in the mouse retina, Irx6 is expressed in type 2 and 3a OFF bipolar interneurons and is required for the expression of cell type-specific markers in these cells, likely through direct transcriptional regulation. In Irx6 mutant mice, presumptive type 3a bipolar cells exhibit an expansion of their axonal projection domain to the entire OFF region of the inner plexiform layer, and adopt molecular features of both type 2 and 3a bipolar cells, highlighted by the ectopic upregulation of neurokinin 3 receptor (Nk3r) and Vsx1. These findings reveal Irx6 as a key regulator of type 3a bipolar cell identity that prevents these cells from adopting characteristic features of type 2 bipolar cells. Analysis of the Irx6;Vsx1 double null retina suggests that the terminal differentiation of type 2 bipolar cells is dependent on the combined expression of the transcription factors Irx6 and Vsx1, but also points to the existence of Irx6;Vsx1-independent mechanisms in regulating OFF bipolar subtype-specific gene expression. This work provides insight into the generation of neuronal subtypes by revealing a mechanism in which opposing, yet interdependent, transcription factors regulate subtype identity.

Chemical bath deposition of ZnO on functionalized self-assembled monolayers: selective deposition and control of deposit morphology.

We have developed a method by which to selectively and reproducibly deposit ZnO films on functionalized self-assembled monolayers (SAMs) using chemical bath deposition (CBD). The deposition bath is composed of zinc acetate and ethylenediamine. The deposition reaction pathways are shown to be similar to those observed for sulfides and selenides, even though ethylenediamine acts as both an oxygen source and a complexing agent. On -COOH terminated SAMs, Zn-carboxylate surface complexes act as nucleation sites for ion-by-ion growth, leading to the formation of adherent ZnO nanocrystallites. Cluster-by-cluster growth is also observed, which produces weakly adherent micrometer-sized ZnO crystallites. On -CH3 and -OH terminated SAMs, only micrometer-sized ZnO crystallites are observed because Zn(2+) does not complex with the SAM terminal group, preventing nucleation of the nanocrystalline phase. The application of either ultrasound ("sonication-assisted CBD") or stirring promotes ion-by-ion ZnO growth on -COOH terminated SAMs. Stirring produces smoother but less reproducible ZnO films than sonication-assisted CBD.

Localized surface modes in parity-time-symmetric potentials.

We investigate light-beam propagation along the interface between linear and nonlinear media with parity-time symmetry. A novel class of two-dimensional localized surface modes (LSMs) is found analytically and numerically. If the potential is parity-time invariant along the direction parallel to the interface between the two media, stable LSMs can exist. Otherwise, if the potential is parity-time invariant along the direction perpendicular to the interface between the two media, there are no stable LSMs.

Analyzing the kinematics and longitudinal aerodynamics of a four-wing bionic aircraft.

This paper designs a bionic aircraft model equipped with multiple degrees of freedom to study the inertial force equation and the aerodynamic interaction between its forewings and hindwings. Each wing's phase difference angle (PDA) and stroke plane angle (SPA) are independently adjustable. Employing the kinematic equation of a single wing, we establish a model for the inertial force of the four-wing aircraft, validating its accuracy through experimental comparisons. Furthermore, we analyze various combinations of PDA and SPA parameters for the fore- and hindwings to ascertain the most efficient aerodynamic motion modes. Our findings reveal that aerodynamic interference between the fore- and hindwings tends to be unfavorable, predominantly due to the hindwings being exposed to the wake generated by the forewings, hindering their lift-capturing ability. Nevertheless, a specific PDA = 270° (forewing ahead of hindwing 270°) helps mitigate this interference across a wider range of SPA. Interestingly, when the stroke plane aligns parallel to the horizontal direction, asynchronous flapping of the fore- and hindwings, forming a lift mechanism akin to clap-and-fling wings, positively impacts lift. Consequently, staggered flapping of the fore- and hindwings reduces fuselage jitter and alleviates aerodynamic interference through specialized PDA, resulting in a temporary lift enhancement. The purpose of this study is to provide theoretical support for the longitudinal attitude control of four-wing aircraft.

Predictive value of multiple imaging predictive models for spread through air spaces of lung adenocarcinoma: A systematic review and network meta­analysis.

Spread Through Air Spaces (STAS) is involved in lung adenocarcinoma (LUAD) recurrence, where cancer cells spread into adjacent lung tissue, impacting surgical planning and prognosis assessment. Radiomics-based models show promise in predicting STAS preoperatively, enhancing surgical precision and prognostic evaluations. The present study performed network meta-analysis to assess the predictive efficacy of imaging models for STAS in LUAD. Data were systematically sourced from PubMed, Embase, Scopus, Wiley and Web of Science, according to the Cochrane Handbook for Systematic Reviews of Interventions) and A Measurement Tool to Assess systematic Reviews 2. Using Stata software v17.0 for meta-analysis, surface under the cumulative ranking area (SUCRA) was applied to identify the most effective diagnostic method. Quality assessments were performed using Cochrane Collaboration's risk-of-bias tool and publication bias was assessed using Deeks' funnel plot. The analysis encompassed 14 articles, involving 3,734 patients, and assessed 17 predictive models for STAS in LUAD. According to comprehensive analysis of SUCRA, the machine learning (ML)_Peri_tumour model had the highest accuracy (56.5), the Features_computed tomography (CT) model had the highest sensitivity (51.9) and the positron emission tomography (pet)_CT model had the highest specificity (53.9). ML_Peri_tumour model had the highest predictive performance. The accuracy was as follows: ML_Peri_tumour vs. Features_CT [relative risk (RR)=1.14; 95% confidence interval (CI), 0.99-1.32]; ML_Peri_tumour vs. ML_Tumour (RR=1.04; 95% CI, 0.83-1.30) and ML_Peri_tumour vs. pet_CT (RR=1.04; 95% CI, 0.84-1.29). Comparative analyses revealed heightened predictive accuracy of the ML_Peri_tumour compared with other models. Nonetheless, the field of radiological feature analysis for STAS prediction remains nascent, necessitating improvements in technical reproducibility and comprehensive model evaluation.

Disinfection efficacy of sodium hypochlorite and glutaraldehyde and their effects on the dimensional stability and surface properties of dental impressions: a systematic review.

Objective: To systematically evaluate the disinfection efficacy of the two most frequently used disinfectants, sodium hypochlorite and glutaraldehyde, and their effects on the surface properties of four different dental impression materials. Methods: A systematic literature search was performed in four databases until May 1st, 2022 to select the studies which evaluated disinfection efficacy of disinfectants or surface properties of dental impressions after chemical disinfection. Main results: A total of 50 studies were included through electronic database searches. Of these studies, 13 studies evaluated disinfection efficacy of two disinfectants, and 39 studies evaluated their effects on the surface properties of dental impressions. A 10-minute disinfection with 0.5-1% sodium hypochlorite or 2% glutaraldehyde was effective to inactivate oral flora and common oral pathogenic bacteria. With regard to surface properties, chemical disinfection within 30 min could not alter the dimensional stability, detail reproduction and wettability of alginate and polyether impressions. However, the wettability of addition silicone impressions and the dimensional stability of condensation silicone impressions were adversely affected after chemical disinfection, while other surface properties of these two dental impressions were out of significant influence. Conclusions: Alginate impressions are strongly recommended to be disinfected with 0.5% sodium hypochlorite using spray disinfection method for 10 min. Meanwhile, elastomeric impressions are strongly recommended to be disinfected with 0.5% sodium hypochlorite or 2% glutaraldehyde using immersion disinfection method for 10 min, however, polyether impression should be disinfected with 2% glutaraldehyde.

Dental manifestations and treatment of hypophosphatemic rickets: A case report and review of literature.

BACKGROUND: The treatment and management of patients suffering from hypophosphatemic rickets (HR) remain a major challenge for dental practitioners and affected patients. OBJECTIVES: To report a case of HR presenting with specific dental findings and to review the dental manifestations and treatment of HR patients. METHODS: Case: A 32-year-old male presented with multiple dental abscesses and short stature. A thorough history was taken followed by clinical oral examination, and relevant radiological investigation was done. Literature research: In 2020, electronic literature searches were carried out in PubMed and complemented by a careful assessment of the reference lists of the identified relevant papers. Articles and reports fulfilled the inclusion criteria: indexed reviews, case series and case reports in English and restricted to human studies were considered. RESULTS: The intraoral examination revealed multiple dental abscesses and general periodontal disease; the radiographic examination showed poorly defined lamina dura, large pulp chambers and periapical lesions. Based on the contents of the 43 articles identified in the search, the current knowledge of dental manifestations, treatment and management of HR was summarized. CONCLUSIONS: As HR is a multisystem disease, multidisciplinary care is needed. By summarizing current evidences, we proposed an evidence-based dental management and provided recommendations on diagnosis and treatment of the disease. It is of profound clinical significance to acquire knowledge of the dental manifestations and provide optimal treatment options for patients.

Recycling technologies, policies, prospects, and challenges for spent batteries.

The recycling of spent batteries is an important concern in resource conservation and environmental protection, while it is facing challenges such as insufficient recycling channels, high costs, and technical difficulties. To address these issues, a review of the recycling of spent batteries, emphasizing the importance and potential value of recycling is conducted. Besides, the recycling policies and strategies implemented in representative countries are summarized, providing legal and policy support for the recycling industry. Moreover, a comprehensive classification and comparison of recycling technologies identify the characteristics and current status of different approaches. The integrated recycling technology provides a better recycling performance with zero-pollution recycling of spent battery. Biorecycling technology is expected to gain a broad development prospect in the future owing to the superiority of energy-saving and environmental protection, high recycling efficiency, via microbial degradation, enzymatic degradation, etc. Consequently, as for the existing recycling challenges of waste batteries, developing new recycling technology and perfecting its recycling system is an indispensable guarantee for the sustainable development of waste battery. Meanwhile, theoretical support is offered for the recycling of spent batteries.

Inclusion Complexes of Photosensitizers with Cyclodextrins for Enhancing the Fabrication of Volume Grating.

A supramolecule photosensitizer (supra-photosensitizer) based on the host-guest complexation of cyclodextrins and a bis-chalcone dye (BDEA) was prepared. Methyl-ß-cyclodextrin (Me-ß-CD), with the highest inclusion rate, was confirmed as the best host among the four cyclodextrins. The host-guest properties of Me-ß-CD and BDEA were characterized by FTIR, XRD, 1H NMR, PLQY, SEM, Job's plot, Benesi-Hildebrand plot, and others. Compared to the conventional photosensitizers, the supra-photosensitizers showed higher fluorescence emission and longer fluorescence lifetime whether as a powder or distributed in a film. The improvement in fluorescence coincided with improvement in photoinitiation efficiency and was proven to enhance the generation of volume grating. It is expected that the supra-photosensitizer may open a new avenue for the design of high-performance photoinitiation systems.

Effects of an orthodontic primer containing amorphous fluorinated calcium phosphate nanoparticles on enamel white spot lesions.

OBJECTIVES: The study investigated the effects of an orthodontic primer containing amorphous fluorinated calcium phosphate (AFCP) nanoparticles on enamel white spot lesions (WSLs). MATERIALS AND METHODS: The AFCP nanoparticles were prepared and incorporated into Transbond XT Primer. Thirty-two human enamel slices were highly polished and randomly divided into four groups: no part covered (control), half covered with a primer containing 0 wt%, 25 wt%, and 35 wt% AFCP. Subsequently, samples were challenged by a modified pH-cycling and characterized by color measurement, micro-computed tomography, and scanning electron microscope (SEM). The bonding properties of the primers containing AFCP were assessed using shear bond strength test, and the mouse fibroblasts (L929) were employed to evaluate the cytotoxicity. RESULTS: When the enamel was challenged by pH cycling, 25 wt% and 35 wt% AFCP groups exhibited less color change (ΔE) and less mineral loss than the control and 0 wt% AFCP groups. The SEM images showed that the original microstructural integrity and mineral deposition rate of the enamel surface were better in the 25 wt% and 35 wt% AFCP groups. In particular, the 35 wt% AFCP group exhibited the best performance after 3 weeks of pH cycling. The shear bond strength and cell viability revealed no significant difference among the tested groups (P > 0.05). CONCLUSION: Using the primer containing 35 wt% AFCP might be a promising strategy for preventing the occurrence and development of WSLs during orthodontic treatment.

Vsx1 regulates terminal differentiation of type 7 ON bipolar cells.

Although retinal bipolar cells represent a morphologically well defined population of retinal interneurons, very little is known about the developmental mechanisms that regulate their processing. Furthermore, the identity of specific bipolar cell types that function in distinct visual circuits remains poorly understood. Here, we show that the homeobox gene Vsx1 is expressed in Type 7 ON bipolar cells. In the absence of Vsx1, Type 7 bipolar cells exhibit proper morphological specification but show defects in terminal gene expression. Vsx1 is required for the repression of bipolar cell-specific markers, including Calcium-binding protein 5 and Chx10. This contrasts its genetic requirement as an activator of gene expression in OFF bipolar cells. To assess possible ON signaling defects in Vsx1-null mice, we recorded specifically from ON-OFF directionally selective ganglion cells (DSGCs), which cofasciculate with Type 7 bipolar cell terminals. Vsx1-null ON-OFF DSGCs received more sustained excitatory synaptic input, possibly due to Type 7 bipolar cell defects. Interestingly, in Vsx1-null mice, the directionally selective circuit is functional but compromised. Together, these findings indicate that Vsx1 regulates terminal gene expression in Type 7 bipolar cells and is necessary for proper ON visual signaling within a directionally selective circuit.