Nanoscale Surface Compositions and Structures Influence Boron Adsorption Properties of Anion Exchange Resins.

Boron adsorption properties of poly(styrene-co-divinylbenzene) (PSDVB)-based anion-exchange resins with surface-grafted N-methyl-d-glucamine (NMDG) depend strongly on their local surface compositions, structures, and interfacial interactions. Distinct boron adsorption sites have been identified and quantified, and interactions between borate anions and hydroxyl groups of NMDG surface moieties have been established. A combination of X-ray photoelectron spectroscopy (XPS), solid-state nuclear magnetic resonance (NMR), and Fourier-transform infrared (FT-IR) spectroscopy were used to characterize the atomic-level compositions and structures that directly influence the adsorption of borate anions on the NMDG-functionalized resin surface. Surface-enhanced dynamic-nuclear-polarization (DNP)-NMR enabled dilute (3 atom % N) tertiary alkyl amines and quaternary ammonium ions of the NMDG groups to be detected and distinguished with unprecedented sensitivity and resolution at natural abundance 15N (0.4%). Two-dimensional (2D) solid-state 11B{1H}, 13C{1H}, and 11B{11B} NMR analyses provide direct atomic-scale evidence for interactions of borate anions with the NMDG moieties on the resin surfaces, which form stable mono- and bischelate complexes. FT-IR spectra reveal displacements in the stretching vibrational frequencies associated with the O-H and N-H bonds of NMDG groups that corroborate the formation of chelate complexes on the resin surfaces. The atomic-level compositions and structures are related to boron adsorption properties of resin materials synthesized under different conditions, which have important remediation applications.

Nickel Catalyzed Copolymerization of Ethylene and Alkyl Acrylates.

Ni(II) complexes bearing an o-bis(aryl)phosphinophenolate ligand were synthesized as catalysts for copolymerization of ethylene and alkyl acrylates. When the P-bound aryl group was 2,6-dimethoxyphenyl group, one of the oxygen atoms in the methoxy groups coordinated to the nickel center on its apical position. This complex was a highly active catalyst without any activators to give highly linear and high molecular weight copolymers. The structures of the copolymers were determined by 1H and 13C NMR to clarify that the alkyl acrylate comonomers were incorporated in the main chain and that the structures of the copolymers were significantly influenced by the structure of the aryl group in the ligand.

Safety and Effectiveness of Four-Factor Prothrombin Complex Concentrate in Special Populations with INR Below 2: A Post-Marketing Surveillance Study.

INTRODUCTION: We previously conducted a prospective, observational post-marketing surveillance study to assess the safety and effectiveness of four-factor prothrombin complex concentrate (4F-PCC) for rapid vitamin K antagonist (VKA) reversal in Japanese patients. METHODS: This subgroup analysis compared the safety, especially thromboembolic events (TEEs), and effectiveness of 4F-PCC by stratifying patients into two subgroups according to baseline international normalized ratio (INR) levels with < 2.0 and ≥ 2.0. RESULTS: Of 1271 eligible patients, 215 (17.9%) had INR < 2.0 and 987 (82.1%) had INR ≥ 2.0. Overall baseline characteristics were similar between groups; age (74.0 years vs 74.0 years), body mass index (22.1 kg/m2 vs 21.9 kg/m2), ratio of inpatients (90.2% vs 88.7%), manifested atrial fibrillation (46.0% vs 48.8%). Median INRs at baseline were 1.72 (minimum 0.92, maximum 1.99) in the INR < 2.0 group and 2.95 (2.00, 27.11) in the INR ≥ 2.0 group. The most common reason for 4F-PCC administration was intracranial hemorrhage (67.0% vs 59.5%), and lesser gastrointestinal bleeding (0.9% vs 7.5%). After 4F-PCC administration (average doses 24.5 IU/kg [INR < 2.0 group] and 29.2 IU/kg [INR ≥ 2.0 group]), INRs were significantly reduced to 1.21 (- 28%) and 1.31 (- 68%), respectively, and resulted in hemostasis in a similarly rapid manner. The incidences of adverse drug reactions were 3.7% in each group. TEEs occurred in 4 (1.9%) patients in the INR < 2.0 group and 11 (1.1%) patients in the INR ≥ 2.0 group and were predominantly composed of stroke, while similar rates (67.0% vs 62.9%) of bleeding events post-anticoagulant resumption were observed between groups. CONCLUSION: This study supports the favorable tolerability and efficacy of 4F-PCC regardless of baseline INR (< 2.0 or ≥ 2.0), with a prompt reduction of INR and substantial hemostatic effectiveness in the real-world setting for patients requiring urgent VKA reversal, although no indicated 4F-PCC dose for VKA reversal exists for INR < 2.0 to date.

Highly dispersed clay-polyolefin nanocomposites free of compatibilizers, via the in situ polymerization of alpha-olefins by clay-supported catalysts.

In situ polymerization by certain transition metal catalysts supported on and activated by acid-treated montmorillonite produces well-dispersed clay-polyolefin nanocomposites, without requiring either organic surfactants to be present in the clay phase or modification of the polyolefin structure.

Combinatorial synthesis and evaluation of α-iminocarboxamide-nickel(II) catalysts for the copolymerization of ethylene and a polar monomer.

Late-transition metal catalysts used for olefin polymerization, the so-called postmetallocenes, which includes α-iminocarboxamide-nickel(II) catalysts have attracted a great deal of attention because of many valuable features such as the copolymerization of α-olefins with polar monomers. In this paper, the combinatorial synthesis and evaluation of α-iminocarboxamide-nickel(II) catalysts are discussed for their roles in the discovery of a highly active catalyst and elucidation of its structure-activity relationship. The combinatorial optimization of each reaction condition was performed, then a combinatorial library of α-iminocarboxamides with systematically modified substituents was constructed by amidation of α-keto acid chlorides and subsequent imination of α-keto carboxamides in parallel fashion. As a result, 87 analytically pure α-iminocarboxamide ligands were successfully synthesized. α-Iminocarboxamide-nickel(II) catalysts were prepared from the synthesized α-iminocarboxamide ligands. The catalysts' activities for polymerization of ethylene and copolymerization of ethylene and 5-norbornen-2-ol were evaluated. Results of the present study revealed 9 novel active catalysts for ethylene polymerization and 7 novel active catalysts for copolymerization of ethylene and 5-norbornen-2-ol. It should be noted that the best catalysts for ethylene polymerization and for copolymerization in the present study showed higher activities compared to the known active catalyst. Polymerization activities of the catalysts varied dramatically according to the combination of substituents on the α-iminocarboxamides.

Semicrystalline thermoplastic elastomeric polyolefins: Advances through catalyst development and macromolecular design.

We report the design, synthesis, morphology, phase behavior, and mechanical properties of semicrystalline, polyolefin-based block copolymers. By using living, stereoselective insertion polymerization catalysts, syndiotactic polypropylene-block-poly(ethylene-co-propylene)-block-syndiotactic polypropylene and isotactic polypropylene-block-regioirregular polypropylene-block-isotactic polypropylene triblock copolymers were synthesized. The volume fraction and composition of the blocks, as well as the overall size of the macromolecules, were controlled by sequential synthesis of each block of the polymers. These triblock copolymers, with semicrystalline end-blocks and mid-segments with low glass-transition temperatures, show significant potential as thermoplastic elastomers. They have low Young's moduli, large strains at break, and better than 90% elastic recovery at strains of 100% or less. An isotactic polypropylene-block-regioirregular polypropylene-block-isotactic polypropylene-block-regioirregular polypropylene-block-isotactic polypropylene pentablock copolymer was synthesized that also shows exceptional elastomeric properties. Notably, microphase separation is not necessary in the semicrystalline isotactic polypropylenes to achieve good mechanical performance, unlike commercial styrenic thermoplastic elastomers.

Synthesis of block copolymer segments containing different ratios of ethylene and 5-norbornen-2-yl acetate.

Block copolymerization of ethylene with 5-norbornen-2-yl acetate (1) by the nickel catalyst system [N-(2,6-diisopropylphenyl)-2-(2,6-diisopropylphenylimino)propanamide]Ni(eta1-CH2Ph)(PMe3) (2) and Ni(COD)2 (bis(1,4-cyclooctadiene)nickel) (3) produces a variety of block copolymer structures that demonstrate microphase separation. Typical block copolymerizations were carried out in an autoclave charged with a solution of the catalyst mixture and 1 (0.15 M) in toluene. The autoclave was sealed and exposed to PC2H4 = 50 psi for a period of time (T1). A pressure jump to PC2H4 = 1100 psi was then applied and the reaction allowed to proceed for another predetermined interval (T2). Independent experiments were performed to isolate and examine the molecular weight and comonomer composition of the first block. Narrow molecular weight distributions and the increase of polymer molecular weight with increases in T1 or T2 are consistent with a product in which an initial block is formed at low ethylene pressures and quantitatively converted to a block copolymer by the jump to high pressure. Transmission electron microscopy confirms that the materials are microphase separated.