RESUMO
PURPOSE: The purpose of the present study was to evaluate the safety and efficacy of the compression-resistant collagen-based cross-linked matrix for augmentation of maxillary and mandibular soft tissue defects in an animal model. MATERIALS AND METHODS: Six rhesus macaque monkeys were subjected to soft tissue grafting in 4 sites intraorally; the anterior maxilla was subjected to hard and soft tissue grafting with implant placement. Each site was randomly assigned 1 of 3 treatments: a compressive-resistant collagen matrix membrane (CM), a subepithelial connective tissue autograft (SCTG), or sham treatment, in which a partial-thickness flap was elevated and then sutured closed with no further treatment (control). The following methods were used for data collection: in vivo evaluation by periodontal probing, ultrasound, shear modulus elasticity, polyether impressions for volumetric analysis, and in vitro analysis by histologic biopsy examinations. In vitro analysis provided by histologic measurements and evaluations was performed on nondecalcified sections. The follow-up period was 6 months. RESULTS: The SCTG and CM showed favorable tissue integration. No adverse reaction to or deviation from the normal healing processes was detected. The CM integrated well in all sites, with a variable range of soft tissue volume increases. Volumetric discrepancies were appreciated in the histologic analyses and differences were found when the CM and SCTG were applied in the anterior maxilla in combination with hard tissue grafting and implant placement. Histologic evaluation showed favorable integration, no immunogenic response to the CM, and stable volumetric retention in autograft and CM sites during the experimental period. CONCLUSION: The compressive-resistant CM could be a safe and efficacious alternative for soft tissue augmentation by obviating a donor site and the consequent morbidity. Although a similar performance between the CM and SCTG was observed, further studies will be necessary to estimate the clinical potentiality and describe the limits of the technique.
Assuntos
Tecido Conjuntivo , Animais , Colágeno , Macaca mulatta , Mandíbula , MaxilaRESUMO
Virtual surgical planning (VSP) has recently been introduced in craniomaxillofacial surgery with the goal of improving efficiency and precision for complex surgical operations. Among many indications, VSP can also be applied for the treatment of congenital and acquired craniofacial defects, including orbital fractures. VSP permits the surgeon to visualize the complex anatomy of craniofacial region, showing the relationship between bone and neurovascular structures. It can be used to design and print using three-dimensional (3D) printing technology and customized surgical models. Additionally, intraoperative navigation may be useful as an aid in performing the surgery. Navigation is useful for both the surgical dissection as well as to confirm the placement of the implant. Navigation has been found to be especially useful for orbit and sinus surgery. The present paper reports a case describing the use of VSP and computerized navigation for the reconstruction of a large orbital floor defect with a custom implant.
Assuntos
Órbita/lesões , Procedimentos de Cirurgia Plástica/métodos , Cirurgia Assistida por Computador/métodos , Adulto , Benzofenonas , Feminino , Humanos , Cetonas , Órbita/diagnóstico por imagem , Órbita/cirurgia , Polietilenoglicóis , Polímeros , Impressão Tridimensional , Tomografia Computadorizada por Raios XRESUMO
AIM: The present study evaluated the clinical and radiological stability of hard and soft tissues following alveolar socket preservation (ASP) procedure with a follow-up of 5 year from implant insertion. MATERIALS AND METHODS: The initial sample consisted of seven patients who underwent single tooth extraction and ASP procedure by means of demineralized bovine bone mineral particles covered with a porcine-derived non-cross-linked collagen matrix (CM). Each patient received a submerged single implant in the healed site. Mesial and distal peri-implant marginal bone resorption (MBR) rates were assessed radiographically at 1 year (T 1) and 5 years (T 2) after implant placement (baseline value). RESULTS AND STATISTICS: No dropouts occurred up to 5 years. At T 1, the MBR was 0.08 ± 0.16 mm at the mesial aspect and 0.1 ± 0.12 mm at the distal aspect. This difference was not statistically significant (P = 0.867). At T 2, the mesial MBR was 0.15 ± 0.17 mm and the distal MBR was 0.11 ± 0.14 mm, with a non-statistically significant difference (P = 0.532). Therefore, no statistically significant differences were detected comparing mesial and distal MBR at any time point. With respect to the intra-group comparisons, no differences were observed comparing the different study periods within each variable. Indeed, the comparison between T 0, T 1 and T 2 was non-statistically significant at both mesial (P = 0.06) and distal (P = 0.06) aspects. After 5 years, the volume of the soft tissues appeared clinically well maintained with a natural aspect around dental implants and adjacent teeth. CONCLUSION: ASP using demineralized bovine bone mineral in combination with CM proved to be an effective technique to maintain stable dimensional volumes of both hard and soft tissues.
RESUMO
BACKGROUND: bone augmentation by means of manually shaped titanium mesh is an established procedure to regenerate atrophic alveolar ridges and recreate a proper contour of the peri-implant bone anatomy. Conversely, current literature on the use of preformed titanium meshes instead of traditional grids remains lacking. Therefore, the aim of the present prospective study was to evaluate the use of preformed titanium mesh to support bone regeneration simultaneously to implant placement at dehiscence-type defects from clinical, radiological, and patient-related outcomes. METHODS: 8 implants showing buccal dehiscence defects were treated with preformed titanium mesh directly fixed to flat abutments screwed to the implant. Intrasurgical clinical measurements and radiographic evaluations by means of cone-beam computed tomography scans were performed to assess the horizontal bone gain after 8 months from the augmentation surgery. Biological and patient-centered outcomes were also evaluated.; Results: clinically, a mean horizontal bone gain of 4.95 ± 0.96 mm, and a mean horizontal thickness of the buccal plate of 3.25 ± 0.46 mm were found. A mean horizontal bone gain of 5.06 ± 0.88 mm associated with a mean horizontal thickness of the buccal plate of 3.45 ± 0.68 mm were observed radiographically. From a macroscopic aspect, the remodeled graft appeared well integrated with the host bone. Well vascularized newly formed bone-like tissue was observed in intimate contact with the implants. CONCLUSIONS: preformed titanium mesh may be effective in supporting simultaneous horizontal bone regeneration at dehiscence-type peri-implant defects. Titanium mesh exposure still remain an issue in this type of surgery.
RESUMO
(1) Background: The tissue engineering field has been working to find biomaterials that mimic the biological properties of autogenous bone grafts. (2) Aim: To evaluate the osteoconduction potential of injectable calcium phosphate cement implanted in critical defects in rat calvaria. (3) Methods: In the calvarial bone of 36 rats, 7-mm diameter critical size defects were performed. Afterwards, the animals were randomly divided into three groups according to filler material: a blood clot group (BC), blood clot membrane group (BCM), and an injectable ß-tricalcium phosphate group (HBS) cement group. After periods of 30 and 60 days, the animals were euthanized, the calvaria was isolated, and submitted to a decalcification process for later blades confection. Qualitative and quantitative analysis of the neoformed bone tissue were conducted, and histometric data were statistically analyzed. (4) Results: Sixty days post-surgery, the percentages of neoformed bone were 10.67 ± 5.57 in group BC, 16.71 ± 5.0 in group BCM, and 55.11 ± 13.20 in group HBS. The bone formation values in group HBS were significantly higher (p < 0.05) than in groups BC and BCM. (5) Conclusions: Based on these results, it can be concluded that injectable calcium phosphate cement is an osteoconductive material that can be used to fill bone cavities.
RESUMO
BACKGROUND: The aim of this randomized clinical trial was to assess the efficacy of an oscillating-rotating toothbrush in reducing plaque and inflammation around dental implants. METHODS: Eighty patients presenting dental implants were enrolled in this study and assigned randomly to two different groups: 40 patients in the test group and 40 in the control one. Each patient in the test group received an oscillating-rotating toothbrush while in the control group patients kept using the manual toothbrush. Furthermore, the test group received a special toothbrush head designed for dental implants and another one for natural teeth. Domiciliary oral hygiene instructions were given to both groups. Periodontal parameters like plaque index (PI), bleeding on probing (BoP), and probing pocket depth (PPD) were recorded at the baseline and after 1 and 3 months. RESULTS: At the end of the study, the difference of plaque and bleeding indices with the baseline was statistically significant for both test and control groups (P < 0.0001). Implant sites showed higher values of both BoP and PI when compared to the natural teeth. In the second part of the study, comparing the 1-3-month period, the oscillating-rotating toothbrush was effective in reducing new plaque formation (P < 0.0001) and bleeding (P < 0.0001) both at the implant sites and the dental sites comparing to manual ones (P > 0.05). No significant differences were appreciated concerning the PPD. CONCLUSIONS: The oscillating-rotating toothbrush can be successfully used for the plaque and bleeding control of the peri-implant tissues.
RESUMO
The development and increase in knowledge of the benefits and applications of growth factors in craniofacial reconstruction adds a novel tool in the reconstructive surgeon's armamentarium. The use of growth factors varies according to presentation. Growth factors help to promote healing, angiogenesis, and formation of bone of improved quality and quantity. Growth factors used with stem cells and scaffolds provide a solution or alternative to discomfort created by donor autograft sites. The application and results of these growth factors are displayed in various examples of maxillofacial defects in this article, including reconstruction of a premaxillary cleft and of maxillary augmentation.
Assuntos
Transplante Ósseo/métodos , Peptídeos e Proteínas de Sinalização Intercelular/farmacologia , Procedimentos Cirúrgicos Bucais/métodos , Procedimentos de Cirurgia Plástica/métodos , Medicina Regenerativa/métodos , Aumento do Rebordo Alveolar/métodos , Anormalidades Craniofaciais/cirurgia , Humanos , Neovascularização Fisiológica/efeitos dos fármacos , Osteogênese/efeitos dos fármacos , Transplante de Células-Tronco , Alicerces Teciduais , Cicatrização/efeitos dos fármacosRESUMO
The approach to skeletal dysmorphisms in the maxillofacial area usually requires an orthodontic treatment by means of fixed appliances, both before and after the surgical phase. Since its introduction, Invisalign system has become a popular treatment choice for the clinicians because of the aesthetics and comfort of the removable clear aligners compared with the traditional appliances. Therefore, the aim of the present report was to illustrate the management of a malocclusion by means of Invisalign system associated with the traditional surgical technique. The present paper shows a case of a 23-year-old male patient characterized by a Class III malocclusion with lateral deviation of the mandible to the left side and cross-bite on teeth 2.2, 2.3, and 2.4. Invisalign system was used during the pre- and postsurgical phases rather than fixed appliances. The posttreatment cephalometric analysis emphasized the stability of the dental and skeletal symmetry corrections, occlusion and functional balance, over a 6-year follow-up. The results achieved at the end of the treatment showed how Invisalign can be effective in the management of the orthodontic phases in orthognathic surgery. The follow-up after 6 years emphasizes the stability of the treatment over time.
RESUMO
The purpose of the present case report was to describe the surgical treatment of a peri-implantitis lesion associated with a regenerative approach. A 48-year-old patient came to authors' attention 36 months after the placement of a dental implant (ITI-Bonefit Straumann, Waldenburg, Switzerland) in position 46. A swelling of the peri-implant soft tissues was observed, associated with bleeding on probing and probing depth > 10 mm. A significant peri-implant bone loss was clearly visible on the periapical radiograph. A nonsurgical periodontal supportive therapy was firstly conducted to reduce the inflammation, followed by the surgical treatment of the defect. After mechanical and chemical decontamination with tetracycline solution, a regenerative approach consisting in the application of deproteinized bovine bone mineral (Bio-Oss, Geistlich Pharma AG, Wolhusen, Switzerland) and a collagen membrane (Bio-Gide, Geistlich Pharma AG, Wolhusen, Switzerland) was performed. An antibiotic therapy was associated with the treatment. The 17-year follow-up showed a physiological probing depth with no clinical signs of peri-implant inflammation and bleeding on probing. No further radiographic bone loss was observed. The treatment described in the present case report seemed to show improved clinical results up to a relevant follow-up period.
RESUMO
PURPOSE: The aim of this work was to analyse all the applied movements when extracting healthy upper and lower jaw premolars for orthodontic purposes. The authors wanted to demonstrate that the different bone densities of the mandible and maxilla are not a significant parameter when related to the extraction force applied. The buccal and palatal rocking movements, plus the twisting movements were also measured in this in-vivo study during premolar extraction for orthodontic purposes. METHODS: THE PHYSICAL STRAINS OR FORCES TRANSFERRED ONTO THE TEETH DURING EXTRACTION ARE THE FOLLOWING THREE MOVEMENTS: gripping, twisting, and traction. A strain measurement gauge was attached onto an ordinary dentistry plier. The strain measurement gauge was constituted with an extensimetric washer with three 45º grids. The system operation was correlated to the variation of electrical resistance. RESULTS: The variations of resistance (∆R) and all the different forces applied to the teeth (∆V) were recorded by a computerized system. Data results were processed through Microsoft Excel. The results underlined the stress distribution on the extracted teeth during gripping, twisting and flexion. CONCLUSIONS: The obtained data showed that the strength required to effect teeth extraction is not influenced by the quality of the bone but is instead influenced by the shape of the tooth's root.
RESUMO
Rapidly evolving implantation and alveolar ridge reconstruction techniques created a new area in modern dentistry where tooth loss is no longer a problem. Endless variations of implant's length, diameter, surface, and design along with autogenous, alogenous, aloplastic, or xenogenous bone substitutes made it possible to recreate physiological occlusion, esthetic and masticatory function. However, none of nowadays technologies in implant dentistry have the potential to adapt to a growth and development changes of a child's jaw. Therefore, patient's young age is a restriction for implantation and a particular challenge for a dentist willing to restore missing tooth. Thus, tooth auto-transplantation can be a good choice for treatment. The objective of this review is to underline the biologic principles required for successful auto-transplantation of teeth. Limits, indications, technique, and prognosis will be analyzed.
RESUMO
UNLABELLED: Dental infections have recently been related with a possible risk factor for Neurodegenerative pathologies like Alzheimer's disease (AD). Even if there are no specific studies investigating orofacial pain in this patient group, dental health is known to be a potential cause of pain and to influence quality of life and disease progression. The aim of this study was to investigate how the AD patients' oral health status may influence their quality of life. 158 patients affected by AD were evaluated using Decayed Missed Filled Teeth (DMFT), Oral Health Impact Profile-14 (OHIP-14) and Clinical Investigation consisting in the detection of cavities and measurement of the probing depth in each patient; other parameters like gingival bleeding, biofilm index and tooth mobility degree test have been recorded. The ratio between diagnosis of periodontal disease and impact on quality of life was significant in individuals with periodontitis (p < 0.001) and missed filled teeth. Gingival bleeding, and probing depth > 4 mm were associated with intensely negative impact on quality of life (p = 0.013, p < 0.001, and p = 0.012 respectively). Moreover, the absence of more than 2 molar teeth increases the chewing inability decreasing the patient quality of life. CONCLUSION: It was observed a correlation between the age and the high index of pathologies analyzed, due to the progressive nature of the disease. Concepts of health and disease determined by clinical diagnostic criteria may influence the assessment of the impact of periodontal disease on Alzheimer's quality of life.