Charge-based engineering of hydrophobin HFBI: effect on interfacial assembly and interactions.

Hydrophobins are extracellular proteins produced by filamentous fungi. They show a variety of functions at interfaces that help fungi to adapt to their environment by, for example, adhesion, formation of coatings, and lowering the surface tension of water. Hydrophobins fold into a globular structure and have a distinct hydrophobic patch on their surface that makes these proteins amphiphilic. Their amphiphilicity implies interfacial assembly, but observations indicate that intermolecular interactions also contribute to their functional properties. Here, we used the class II hydrophobin HFBI from Trichoderma reesei as a model to understand the structural basis for the function of hydrophobins. Four different variants were made in which charged residues were mutated. The residues were chosen to probe the role of different regions of the hydrophilic part of the proteins. Effects of the mutations were studied by analyzing the formation and structure of self-assembled layers, multimerization in solution, surface adhesion, binding of secondary layers of proteins on hydrophobins, and the viscoelastic behavior of the air-water interface during formation of protein films; the comparison showed clear differences between variants only in the last two analyses. Surface viscoelasticity behavior suggests that the formation of surface layers is regulated by specific interactions that lead to docking of proteins to each other. One set of mutations led to assemblies with a remarkably high elasticity at the air-water interface (1.44 N/m). The variation of binding of secondary layers of protein on surface-adsorbed hydrophobins suggest a mechanism for a proposed function of hydrophobins, namely, that hydrophobins can act as a specific adhesive layer for the binding of macromolecules to interfaces.

Enzyme-treated chicory for cosmetics: application assessment and techno-economic analysis.

Chicory (Cichorium intybus L.) is an important industrial crop that produces large quantities of the dietary fiber inulin in its roots. Following inulin extraction, the bagasse is typically used as animal feed, but it contains numerous bioactive secondary metabolites with potential applications in healthcare and cosmetic products. Here we assessed the antimicrobial properties of chicory biomass pre-treated with various enzymes alone and in combination to release the bioactive compounds and increase their bioavailability. We found that pre-treatment significantly increased the antimicrobial activity of this industrial by-product, yielding an extract that inhibited typical skin pathogens in a cosmetic formula challenge test. We also evaluated the valorization of chicory biomass as a bioactive cosmetic ingredient. Economic feasibility was estimated by combining our experimental results with a conceptual techno-economic analysis. Our results suggest that chicory biomass can be utilized for the sustainable production of efficacious cosmetic ingredients.

Proteomic and functional analysis of the cellulase system expressed by Postia placenta during brown rot of solid wood.

Brown rot basidiomycetes have an important ecological role in lignocellulose recycling and are notable for their rapid degradation of wood polymers via oxidative and hydrolytic mechanisms. However, most of these fungi apparently lack processive (exo-acting) cellulases, such as cellobiohydrolases, which are generally required for efficient cellulolysis. The recent sequencing of the Postia placenta genome now permits a proteomic approach to this longstanding conundrum. We grew P. placenta on solid aspen wood, extracted proteins from the biodegrading substrate, and analyzed tryptic digests by shotgun liquid chromatography-tandem mass spectrometry. Comparison of the data with the predicted P. placenta proteome revealed the presence of 34 likely glycoside hydrolases, but only four of these--two in glycoside hydrolase family 5, one in family 10, and one in family 12--have sequences that suggested possible activity on cellulose. We expressed these enzymes heterologously and determined that they all exhibited endoglucanase activity on phosphoric acid-swollen cellulose. They also slowly hydrolyzed filter paper, a more crystalline substrate, but the soluble/insoluble reducing sugar ratios they produced classify them as nonprocessive. Computer simulations indicated that these enzymes produced soluble/insoluble ratios on reduced phosphoric acid-swollen cellulose that were higher than expected for random hydrolysis, which suggests that they could possess limited exo activity, but they are at best 10-fold less processive than cellobiohydrolases. It appears likely that P. placenta employs a combination of oxidative mechanisms and endo-acting cellulases to degrade cellulose efficiently in the absence of a significant processive component.

Changes in submicrometer structure of enzymatically hydrolyzed microcrystalline cellulose.

To understand the limitations occurring during enzymatic hydrolysis of cellulosic materials in renewable energy production, we used wide-angle X-ray scattering (WAXS), small-angle X-ray scattering (SAXS), X-ray microtomography, and transmission electron microscopy (TEM) to characterize submicrometer changes in the structure of microcrystalline cellulose (Avicel) digested with the Trichoderma reesei enzyme system. The microtomography measurements showed a clear decrease in particle size in scale of tens of micrometers. In all the TEM pictures, similar elongated and partly ramified structures were observed, independent of the hydrolysis time. The SAXS results of rewetted samples suggested a slight change in the structure in scale of 10-20 nm, whereas the WAXS results confirmed that the degree of crystallinity and the crystal sizes remained unchanged. This indicates that the enzymes act on the surface of cellulose bundles and are unable to penetrate into the nanopores of wet cellulose.

Fibrolytic enzyme treatment prior to ensiling increased press-juice and crude protein yield from grass silage.

Grass is a versatile raw material for green biorefineries and preserving it as silage provides a year-round feedstock. The objective of the current study was to evaluate the effect of fibrolytic enzyme application on silage as a feedstock for a biorefinery. Two batches of grass (mixture of timothy and meadow fescue) silages were ensiled in pilot scale after fibrolytic enzyme was applied to them at four levels. Enzyme application increased fibre degradation linearly during ensiling and increased lactic and acetic acid concentrations in the silage. Simultaneously, silage fermentation quality improved as indicated by decreasing pH and ammonia values. Press-juice and crude protein yields increased in response to the fibrolytic enzyme application, which is beneficial in a biorefinery concept for retrieving valuable nutrients from grass matrix. Optimized ensiling methodology can be considered as a pretreatment for a biorefinery process.

Cloning, expression, and characterization of novel thermostable family 7 cellobiohydrolases.

As part of the effort to find better cellulases for bioethanol production processes, we were looking for novel GH-7 family cellobiohydrolases, which would be particularly active on insoluble polymeric substrates and participate in the rate-limiting step in the hydrolysis of cellulose. The enzymatic properties were studied and are reported here for family 7 cellobiohydrolases from the thermophilic fungi Acremonium thermophilum, Thermoascus aurantiacus, and Chaetomium thermophilum. The Trichoderma reesei Cel7A enzyme was used as a reference in the experiments. As the native T. aurantiacus Cel7A has no carbohydrate-binding module (CBM), recombinant proteins having the CBM from either the C. thermophilum Cel7A or the T. reesei Cel7A were also constructed. All these novel acidic cellobiohydrolases were more thermostable (by 4-10 degrees C) and more active (two- to fourfold) in hydrolysis of microcrystalline cellulose (Avicel) at 45 degrees C than T. reesei Cel7A. The C. thermophilum Cel7A showed the highest specific activity and temperature optimum when measured on soluble substrates. The most effective enzyme for Avicel hydrolysis at 70 degrees C, however, was the 2-module version of the T. aurantiacus Cel7A, which was also relatively weakly inhibited by cellobiose. These results are discussed from the structural point of view based on the three-dimensional homology models of these enzymes.

Hydrolysis of amorphous and crystalline cellulose by heterologously produced cellulases of Melanocarpus albomyces.

Three thermostable neutral cellulases from Melanocarpus albomyces, a 20-kDa endoglucanase (Cel45A), a 50-kDa endoglucanase (Cel7A), and a 50-kDa cellobiohydrolase (Cel7B) heterologously produced in a recombinant Trichoderma reesei were purified and studied in hydrolysis (50 degrees C, pH 6.0) of crystalline and amorphous cellulose. To improve their efficiency, M. albomyces cellulases naturally harboring no cellulose-binding module (CBM) were genetically modified to carry the CBM of T. reesei CBHI/Cel7A, and were studied under similar experimental conditions. Hydrolysis performance and product profiles were used to evaluate hydrolytic features of the investigated enzymes. Each cellulase proved to be active against the tested substrates; the cellobiohydrolase Cel7B had greater activity than the endoglucanases Cel45A and Cel7A against crystalline cellulose, whereas in the case of amorphous substrate the order was reversed. Evidence of synergism was observed when mixtures of the novel enzymes were applied in a constant total protein dosage. Presence of the CBM improved the hydrolytic potential of each enzyme in all experimental configurations; it had a greater effect on the endoglucanases Cel45A and Cel7A than the cellobiohydrolase Cel7B, especially against crystalline substrate. The novel cellobiohydrolase performed comparably to the major cellobiohydrolase of T. reesei (CBHI/Cel7A) under the applied experimental conditions.

Development of a low-cost cellulase production process using Trichoderma reesei for Brazilian biorefineries.

BACKGROUND: During the past few years, the first industrial-scale cellulosic ethanol plants have been inaugurated. Although the performance of the commercial cellulase enzymes used in this process has greatly improved over the past decade, cellulases still represent a very significant operational cost. Depending on the region, transport of cellulases from a central production facility to a biorefinery may significantly add to enzyme cost. The aim of the present study was to develop a simple, cost-efficient cellulase production process that could be employed locally at a Brazilian sugarcane biorefinery. RESULTS: Our work focused on two main topics: growth medium formulation and strain improvement. We evaluated several Brazilian low-cost industrial residues for their potential in cellulase production. Among the solid residues evaluated, soybean hulls were found to display clearly the most desirable characteristics. We engineered a Trichoderma reesei strain to secrete cellulase in the presence of repressing sugars, enabling the use of sugarcane molasses as an additional carbon source. In addition, we added a heterologous ß-glucosidase to improve the performance of the produced enzymes in hydrolysis. Finally, the addition of an invertase gene from Aspegillus niger into our strain allowed it to consume sucrose from sugarcane molasses directly. Preliminary cost analysis showed that the overall process can provide for very low-cost enzyme with good hydrolysis performance on industrially pre-treated sugarcane straw. CONCLUSIONS: In this study, we showed that with relatively few genetic modifications and the right growth medium it is possible to produce considerable amounts of well-performing cellulase at very low cost in Brazil using T. reesei. With further enhancements and optimization, such a system could provide a viable alternative to delivered commercial cellulases.

Hydrothermal treatment followed by enzymatic hydrolysis and hydrothermal carbonization as means to valorise agro- and forest-based biomass residues.

The suitability of several abundant but underutilized agro and forest based biomass residues for hydrothermal treatment followed by enzymatic hydrolysis as well as for hydrothermal carbonization was studied. The selected approaches represent simple biotechnical and thermochemical treatment routes suitable for wet biomass. Based on the results, the hydrothermal pre-treatment followed by enzymatic hydrolysis seemed to be most suitable for processing of carbohydrate rich corn leaves, corn stover, wheat straw and willow. High content of thermally stable components (i.e. lignin) and low content of ash in the biomass were advantageous for hydrothermal carbonization of grape pomace, coffee cake, Scots pine bark and willow.

Enzymatic degradation of sulfite-pulped softwoods and the role of LPMOs.

BACKGROUND: Recent advances in the development of enzyme cocktails for degradation of lignocellulosic biomass, especially the discovery of lytic polysaccharide monooxygenases (LPMOs), have opened new perspectives for process design and optimization. Softwood biomass is an abundant resource in many parts of the world, including Scandinavia, but efficient pretreatment and subsequent enzymatic hydrolysis of softwoods are challenging. Sulfite pulping-based pretreatments, such as in the BALI™ process, yield substrates that are relatively easy to degrade. We have assessed how process conditions affect the efficiency of modern cellulase preparations in processing of such substrates. RESULTS: We show that efficient degradation of sulfite-pulped softwoods with modern, LPMO-containing cellulase preparations requires the use of conditions that promote LPMO activity, notably the presence of molecular oxygen and sufficient reducing power. Under LPMO activity-promoting conditions, glucan conversion after 48-h incubation with Cellic® CTec3 reached 73.7 and 84.3% for Norway spruce and loblolly pine, respectively, at an enzyme loading of 8 mg/g of glucan. The presence of free sulfite ions had a negative effect on hydrolysis efficiency. Lignosulfonates, produced from lignin during sulfite pretreatment, showed a potential to activate LPMOs. Spiking of Celluclast®, a cellulase cocktail with low LPMO activity, with monocomponent cellulases or an LPMO showed that the addition of the LPMO was clearly more beneficial than the addition of any classical cellulase. Addition of the LPMO in reactions with spruce increased the saccharification yield from approximately 60% to the levels obtained with Cellic® CTec3. CONCLUSIONS: In this study, we have demonstrated the importance of LPMOs for efficient enzymatic degradation of sulfite-pulped softwood. We have also shown that to exploit the full potential of LPMO-rich cellulase preparations, conditions promoting LPMO activity, in particular the presence of oxygen and reducing equivalents are necessary, as is removal of residual sulfite from the pretreatment step. The use of lignosulfonates as reductants may reduce the costs related to the addition of small molecule reductants in sulfite pretreatment-based biorefineries.

Expression of Two Novel ß-Glucosidases from Chaetomium atrobrunneum in Trichoderma reesei and Characterization of the Heterologous Protein Products.

Two novel GH3 family thermostable ß-glucosidases from the filamentous fungus Chaetomium atrobrunneum (CEL3a and CEL3b) were expressed in Trichoderma reesei, purified by two-step ion exchange chromatography, and characterized. Both enzymes were active over a wide range of pH as compared to Neurospora crassa ß-glucosidase GH3-3, which was also expressed in T. reesei and purified. The optimum temperature of both C. atrobrunneum enzymes was around 60 °C at pH 5, and both enzymes had better thermal and pH stability and higher resistance to metallic compounds and to glucose inhibition than GH3-3. They also showed higher activity against oligosaccharides composed of glucose units and linked with ß-1,4-glycosidic bonds and moreover, had higher affinity for cellotriose over cellobiose. In hydrolysis tests against Avicel cellulose and steam-exploded sugarcane bagasse, performed at 45 °C, particularly the CEL3a enzyme performed similarly to N. crassa GH3-3 ß-glucosidase. Taking into account the thermal stability of the C. atrobrunneum ß-glucosidases, they both represent promising alternatives as enzyme mixture components for improved cellulose saccharification at elevated temperatures.

Characterisation of a 1,4-beta-fucoside hydrolase degrading colanic acid.

A novel colanic acid-degrading enzyme was isolated from a mixed culture filtrate obtained by enrichment culturing of a compost sample using colanic acid as carbon source. The enzyme was partially purified resulting in a 17-fold increase in specific activity. Further purification by Native PAGE revealed that the enzyme is part of a high-molecular weight multi protein complex of at least six individual proteins. The enzyme showed a temperature optimum at 50 degrees C while after 5h at 50 degrees C and pH7 still 70% of the total activity was left. The pH optimum was found to be pH7. Analysis of the degradation products showed that the enzyme is a novel 1,4-beta-fucoside hydrolase that liberates repeating units of colanic acid with varying degrees of acetylation. Km and Vmax of the enzyme were determined against the native substrate as well as its de-O-acetylated and depyruvated forms. Compared to the native substrate the affinity of the enzyme for the modified substrates was much lower. However, for the de-O-acetylated sample a dramatic increase in catalytic efficiency was observed. The native form of the substrate showed substrate inhibition at high concentrations, probably due to the formation of nonproductive substrate complexes. Removal of the acetyl groups probably prevents this effect resulting in a higher catalytic efficiency.

Enzymatic properties of the low molecular mass endoglucanases Cel12A (EG III) and Cel45A (EG V) of Trichoderma reesei.

Trichoderma reesei produces five known endoglucanases. The most studied are Cel7B (EG I) and Cel5A (EG II) which are the most abundant of the endoglucanases. We have performed a characterisation of the enzymatic properties of the less well-studied endoglucanases Cel12A (EG III), Cel45A (EG V) and the catalytic core of Cel45A. For comparison, Cel5A and Cel7B were included in the study. Adsorption studies on microcrystalline cellulose (Avicel) and phosphoric acid swollen cellulose (PASC) showed that Cel5A, Cel7B, Cel45A and Cel45Acore adsorbed to these substrates. In contrast, Cel12A adsorbed weakly to both Avicel and PASC. The products formed on Avicel, PASC and carboxymethylcellulose (CMC) were analysed. Cel7B produced glucose and cellobiose from all substrates. Cel5A and Cel12A also produced cellotriose, in addition to glucose and cellobiose, on the substrates. Cel45A showed a clearly different product pattern by having cellotetraose as the main product, with practically no glucose and cellobiose formation. The kinetic constants were determined on cellotriose, cellotetraose and cellopentaose for the enzymes. Cel12A did not hydrolyse cellotriose. The k(Cat) values for Cel12A on cellotetraose and cellopentaose were significantly lower compared with Cel5A and Cel7B. Cel7B was the only endoglucanase which rapidly hydrolysed cellotriose. Cel45Acore did not show activity on any of the three studied cello-oligosaccharides. The four endoglucanases' capacity to hydrolyse beta-glucan and glucomannan were studied. Cel12A hydrolysed beta-glucan and glucomannan slightly less compared with Cel5A and Cel7B. Cel45A was able to hydrolyse glucomannan significantly more compared with beta-glucan. The capability of Cel45A to hydrolyse glucomannan was higher than that observed for Cel12A, Cel5A and Cel7B. The results indicate that Cel45A is a glucomannanase rather than a strict endoglucanase.

Effects of bacterial treatments on wood extractives.

Bacterial strains were isolated from spruce wood chips and their ability to reduce the content of wood extractives was studied. Strains were screened by cultivation on liquid media containing wood extractives as the major nutrient. Some bacterial species could decrease remarkably the amount of extractives in the liquid media and reduced the amount of triglycerides, steryl esters and total extractives by 100, 20 and 39%, respectively. Spruce wood chips were treated in controlled conditions with selected bacteria to test their effects on the chips. All the bacteria grew well on wood chips. The effect of bacterial metabolism on wood extractives was significant. Bacterial treatments reduced the amount of lipophilic extractives by 16-38% in 1 week of treatment and up to 67% in 2 weeks. The most efficient strain removed 90, 66 and 50% of triglycerides, steryl esters and resin acids, respectively, in 2 weeks. These results indicate that bacteria may be promising agents for the removal of extractives for improved pulping and papermaking processes.

Regioselective deacetylation of cellulose acetates by acetyl xylan esterases of different CE-families.

Cellulose acetate (CA) was found to be a substrate of several acetyl xylan esterases (AXE). Eight AXE from different carbohydrate esterase (CE) families were tested on their activity against CA with a degree of substitution of 0.7 and 1.4. The classification of the AXEs into CE families according to their structure by hydrophobic cluster analysis followed clearly their activity against CA. Within the same CE family similar, and between the CE families different deacetylation behaviours could be observed. Furthermore, each esterase family showed a distinct regioselective mode of action. The CE 1 family enzymes regioselectively cleaved the substituents in C2- and C3-position, while CE 5 family enzymes only cleaved the acetyl groups in C2-position. CE 4 family enzymes seemed to interact only with the substituents in C3-position. Evidence was found that the deacetylation reaction of the CE 1 family enzymes proceeded faster in C2- than in C3-position of CA. The enzymes were able to cleave acetyl groups from fully substituted anhydroglucose units.

Methylobacterium sp. isolated from a Finnish paper machine produces highly pyruvated galactan exopolysaccharide.

The slime-forming bacterium Methylobacterium sp. was isolated from a Finnish paper machine and its exopolysaccharide (EPS) was produced on laboratory scale. Sugar compositional analysis revealed a 100% galactan (EPS). However, FT-IR showed a very strong peak at 1611 cm(-1) showing the presence of pyruvate. Analysis of the pyruvate content revealed that, based on the sugar composition, the EPS consists of a trisaccharide repeating unit consisting of D-galactopyranose and [4,6-O-(1-carboxyethylidene)]-D-galactopyranose with a molar ratio of 1:2, respectively. Both linkage analysis and 2D homo- and heteronuclear 1H and 13C NMR spectroscopy revealed the following repeating unit: -->3)-[4,6-O-(1-carboxyethylidene)]-alpha-D-Galp-(1-->3)[4,6-O-(1-carboxyethylidene)]-alpha-D-Galp-(1-->3)-alpha-D-Galp-(1-->. By enrichment cultures from various ground and compost heap samples a polysaccharide-degrading culture was obtained that produced an endo acting enzyme able to degrade the EPS described. The enzyme hydrolysed the EPS to a large extent, releasing oligomers that mainly consisted out of two repeating units.

Structural elucidation of the EPS of slime producing Brevundimonas vesicularis sp. isolated from a paper machine.

The slime forming bacteria Brevundimonas vesicularis sp. was isolated from a paper mill and its EPS was produced on laboratory scale. After production, the exopolysaccharide (EPS) was purified and analysed for its purity and homogeneity, HPSEC revealed one distinct population with a molecular mass of more than 2,000 kDa. The protein content was around 9 w/w%. The sample was analysed to determine its chemical structure. The EPS was found to consist of rhamnose, glucose, galacturonic acid and glucuronic acid. Due to the presence of uronic acids the molar ratio between the four sugars found varies from 3:5:2:4 by sugar composition analyses after methanolysis to 1:1:1:1 found by NMR. A repeating unit with a molecular mass of 678 Da was confirmed by MALDI-TOF mass spectrometry after mild acid treatment. 13C and 1H hetero- and homonuclear 2D NMR spectroscopy of the native and partial hydrolysed EPS revealed a repeating unit, no non-sugar substituents were present.

Mixtures of thermostable enzymes show high performance in biomass saccharification.

Optimal enzyme mixtures of six Trichoderma reesei enzymes and five thermostable enzyme components were developed for the hydrolysis of hydrothermally pretreated wheat straw, alkaline oxidised sugar cane bagasse and steam-exploded bagasse by statistically designed experiments. Preliminary studies to narrow down the optimization parameters showed that a cellobiohydrolase/endoglucanase (CBH/EG) ratio of 4:1 or higher of thermostable enzymes gave the maximal CBH-EG synergy in the hydrolysis of hydrothermally pretreated wheat straw. The composition of optimal enzyme mixtures depended clearly on the substrate and on the enzyme system studied. The optimal enzyme mixture of thermostable enzymes was dominated by Cel7A and required a relatively high amount of xylanase, whereas with T. reesei enzymes, the high proportion of Cel7B appeared to provide the required xylanase activity. The main effect of the pretreatment method was that the required proportion of xylanase was higher and the proportion of Cel7A lower in the optimized mixture for hydrolysis of alkaline oxidised bagasse than steam-exploded bagasse. In prolonged hydrolyses, less Cel7A was generally required in the optimal mixture. Five-component mixtures of thermostable enzymes showed comparable hydrolysis yields to those of commercial enzyme mixtures.

Effects of enzymatic removal of plant cell wall acylation (acetylation, p-coumaroylation, and feruloylation) on accessibility of cellulose and xylan in natural (non-pretreated) sugar cane fractions.

BACKGROUND: Sugar cane internodes can be divided diagonally into four fractions, of which the two innermost ones are the least recalcitrant pith and the moderately accessible pith-rind interface. These fractions differ in enzymatic hydrolyzability due to structural differences. In general, cellulose hydrolysis in plants is hindered by its physical interaction with hemicellulose and lignin. Lignin is believed to be linked covalently to hemicellulose through hydroxycinnamic acids, forming a compact matrix around the polysaccharides. Acetyl xylan esterase and three feruloyl esterases were evaluated for their potential to fragment the lignocellulosic network in sugar cane and to indirectly increase the accessibility of cellulose. RESULTS: The hydrolyzability of the pith and pith-rind interface fractions of a low-lignin-containing sugar cane clone (H58) was compared to that of a reference cultivar (RC). Acetyl xylan esterase enhanced the rate and overall yield of cellulose and xylan hydrolysis in all four substrates. Of the three feruloyl esterases tested, only TsFaeC was capable of releasing p-coumaric acid, while AnFaeA and NcFaeD released ferulic acid from both the pith and interface fractions. Ferulic acid release was higher from the less recalcitrant clone (H58)/fraction (pith), whereas more p-coumaric acid was released from the clone (RC)/fraction (interface) with a higher lignin content. In addition, a compositional analysis of the four fractions revealed that p-coumaroyl content correlated with lignin, while feruloyl content correlated with arabinose content, suggesting different esterification patterns of these two hydroxycinnamic acids. Despite the extensive release of phenolic acids, feruloyl esterases only moderately promoted enzyme access to cellulose or xylan. CONCLUSIONS: Acetyl xylan esterase TrAXE was more efficient in enhancing the overall saccharification of sugar cane, compared to the feruloyl esterases AnFaeA, TsFaeC, and NcFaeD. The hydroxycinnamic acid composition of sugar cane fractions and the hydrolysis data together suggest that feruloyl groups are more likely to decorate xylan, while p-coumaroyl groups are rather linked to lignin. The three different feruloyl esterases had distinct product profiles on non-pretreated sugar cane substrate, indicating that sugar cane pith could function as a possible natural substrate for feruloyl esterase activity measurements. Hydrolysis data suggest that TsFaeC was able to release p-coumaroyl groups esterifying lignin.

Assessment of the enzymatic hydrolysis profile of cellulosic substrates based on reducing sugar release.

The activity profile of a 1:0.30 mixture of Celluclast 1.5L FG and Novozym 188 (Novozymes) was investigated using Whatman #1 filter paper (W1FP) as a single substrate for hydrolysis. The procedure was based on the ability of the enzymes to release total (RS(Tot)), insoluble (RS(Insol)) and soluble (RS(Sol)) reducing sugars from W1FP. RS(Insol) was used to estimate endoglucanase (EnG) activity whereas exoglucanases (ExG) were assessed by measuring RSSol in the presence of δ-gluconolactone. Finally, the ß-glucosidase (ßG) activity was derived from the difference between RS(Sol) measurements in the presence and absence of δ-gluconolactone. When this analytical procedure was applied to W1FP using 9.64 mg mL(-1) of the enzyme mixture, the relative contributions of EnG, ExG and ßG to the total cellulase activity were 63.28%, 12.02% and 24.70%, respectively. Also, this ratio changed with changes in the enzyme loading, giving a new insight into the synergy that exists among the enzymes.