Multienzyme Mimicking Cascade Mn3O4 Catalyst to Augment Reactive Oxygen Species Elimination and Colorimetric Detection: A Study of Phase Variation upon Calcination Temperature.

Over decades, nanozyme has served as a better replacement of bioenzymes and fulfills most of the shortcomings and intrinsic disadvantages of bioenzymes. Recently, manganese-based nanomaterials have been highly noticed for redox-modulated multienzyme mimicking activity and wide applications in biosensing and biomedical science. The redox-modulated multienzyme mimicking activity was highly in tune with their size, surface functionalization, and charge on the surface and phases. On the subject of calcination temperature to Mn3O4 nanoparticles (NPs), its phase has been transformed to Mn2O3 NPs and Mn5O8 NPs upon different calcination temperatures. Assigning precise structure-property connections is made easier by preparing the various manganese oxides in a single step. The present study has focused on the variation of multienzyme mimicking activity with different phases of Mn3O4 NPs, so that they can be equipped for multifunctional activity with greater potential. Herein, spherical Mn3O4 NPs have been synthesized via a one-step coprecipitation method, and other phases are obtained by direct calcination. The calcination temperature varies to 100, 200, 400, and 600 °C and the corresponding manganese oxide NPs are named M-100, M-200, M-400, and M-600, respectively. The phase transformation and crystalline structure are evaluated by powder X-ray diffraction and selected-area electron diffraction analysis. The different surface morphologies are easily navigated by Fourier transform infrared, field-emission scanning electron microscopy, and high-resolution transmission electron microscopy analysis. Fortunately, for the mixed valence state of Mn3O4 NPs, all phases of manganese oxide NPs showed multienzyme mimicking activity including superoxide dismutase (SOD), catalase, oxidase (OD), and peroxidase; therefore, it offers a synergistic antioxidant ability to overexpose reactive oxygen species. Mn3O4 NPs exhibited good SOD-like enzyme activity, which allowed it to effectively remove the active oxygen (O2•-) from cigarette smoke. A sensitive colorimetric sensor with a low detection limit and a promising linear range has been designed to detect two isomeric phenolic pollutants, hydroquinone (H2Q) and catechol (CA), by utilizing optimized OD activity. The current probe has outstanding sensitivity and selectivity as well as the ability to visually detect two isomers with the unaided eye.

Density functional theoretical modeling, electrostatic surface potential and surface enhanced Raman spectroscopic studies on biosynthesized silver nanoparticles: observation of 400 PM sensitivity to explosives.

Interaction of adsorbate on charged surfaces, orientation of the analyte on the surface, and surface enhancement aspects have been studied. These aspects have been explored in details to explain the surface-enhanced Raman spectroscopic (SERS) spectra of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (HNIW or CL-20), a well-known explosive, and 2,4,6-trinitrotoluene (TNT) using one-pot synthesis of silver nanoparticles via biosynthetic route using natural precursor extracts of clove and pepper. The biosynthesized silver nanoparticles (bio Ag Nps) have been characterized using UV-vis spectroscopy, scanning electron microscopy and atomic force microscopy. SERS studies conducted using bio Ag Nps on different water insoluble analytes, such as CL-20 and TNT, lead to SERS signals at concentration levels of 400 pM. The experimental findings have been corroborated with density functional computational results, electrostatic surface potential calculations, Fukui functions and ζ potential measurements.

Processing of aerogels and their applications toward CO2 adsorption and electrochemical reduction: a review.

Aerogels are a unique class of nanoporous ultralight materials exhibiting wide range of textural characteristic properties and tunable porosities. Due to their remarkable features such as low density, high surface area, low refractive index, small thermal conductivity, low dielectric constant and low sound velocity, they exhibit a wide range of applications in different areas such as electronics, thermal and acoustic insulation, chemistry, biomedicine and optics. The special advantages of these materials are that they can be produced in different forms such as monoliths/granular, bead/microspheres, thin films or sheets and as blankets. Aerogels are found to be potential materials for the removal of CO2 through adsorption or electrochemical reduction. There is a plethora of research on different kinds of aerogels used for CO2 adsorption process. Research has been going on toward the development of aerogel-based electrocatalyst, which can be used for valorization of CO2 through electrochemical reduction methods. Although most of the review papers have covered applications of aerogels in CO2 capture, very few discuss the processing of aerogels, more so on their applications in CO2 valorization. In this review, we have collated literature of different forms of aerogels currently available and the steps involved in their fabrication process. In addition, we have covered applications of aerogels in CO2 capture. Furthermore, we focussed on the basic principles involved in the development of an aerogel electrocatalyst as well as recent developments of aerogels in electrochemical CO2 reduction.

Potential of Raman spectroscopic techniques to study proteins.

Proteins are large, complex molecules responsible for various biological processes. However, protein misfolding may lead to various life-threatening diseases. Therefore, it is vital to understand the shape and structure of proteins. Despite numerous techniques, a mechanistic understanding of the protein folding process is still unclear. Therefore, new techniques are continually being explored. In the present article, we have discussed the importance of Raman spectroscopy, Raman Optical Activity (ROA) and various other advancements in Raman spectroscopy to understand protein structure and conformational changes based on the review of our earlier work and recent literature. A Raman spectrum of a protein provides unique signatures for various secondary structures like helices, beta-sheets, turns, random structures, etc., and various amino acid residues such as tyrosine, tryptophan, and phenylalanine. We have shown how Raman spectra can differentiate between bovine serum albumin (BSA) and lysozyme protein based on their difference in sequence and structure (primary, secondary and tertiary). Although it is challenging to elucidate the structure of a protein using a Raman spectrum alone, Raman spectra can be used to differentiate small changes in conformations of proteins such as BSA during melting. Various new advancements in technique and data analyses in Raman spectroscopic studies of proteins have been discussed. The last part of the review focuses on the importance of the ROA spectrum to understand additional features about proteins. The ROA spectrum is rich in information about the protein backbone due to its rigidity compared to its side chains. Furthermore, the ROA spectra of lysozyme and BSA have been presented to show how ROA provides extra information about the solvent properties of proteins.

Understanding phase transition and vibrational mode coupling in ammonium nitrate using 2D correlation Raman spectroscopy.

Ammonium nitrate (AN) is an important component of the chemical industry such as an active ingredient in fertilizers, as an oxidizer in explosive compositions and propellants, and as a blasting agent in civil explosives. Numerous accidents have been reported in the past which concerns its thermal instability and poses a big threat to its processing, transportation, and storage. Despite much literature being reported to understand its thermal instability, a mechanistic view remains unclear. In the present work, we have studied the behavior of AN to temperature change using a mathematical approach called 2D correlation (2D Cos) Raman spectroscopy to provide complete insight into the detailed dynamical nature of the interactions between the species (ionic or molecular) occurring with an increase in temperature. We have analyzed various libration and translational modes of nitrate in the low-frequency region using this mathematical tool. It is observed from 2D maps that the phase transition of AN starts with changes in libration modes followed by various nitrate modes and ammonium modes which further precedes low-frequency translational modes. Further, the 2D correlation could differentiate between modes splitting and shifting based on specific 2D Cos pattern. The changes occurring in the N-O deformation modes, symmetric stretching modes as well as anti-symmetric stretching modes which have been attributed to the weakening of the hetero-ionic coupling between the NH4+ and the NO3- ions could be clearly distinguished in the 2D synchronous and asynchronous plots. Besides, moving window analysis was performed to visualize the transition temperature at which phase change of AN takes place.

Challenges in application of Raman spectroscopy to biology and materials.

Raman spectroscopy has become an essential tool for chemists, physicists, biologists and materials scientists. In this article, we present the challenges in unravelling the molecule-specific Raman spectral signatures of different biomolecules like proteins, nucleic acids, lipids and carbohydrates based on the review of our work and the current trends in these areas. We also show how Raman spectroscopy can be used to probe the secondary and tertiary structural changes occurring during thermal denaturation of protein and lysozyme as well as more complex biological systems like bacteria. Complex biological systems like tissues, cells, blood serum etc. are also made up of such biomolecules. Using mice liver and blood serum, it is shown that different tissues yield their unique signature Raman spectra, owing to a difference in the relative composition of the biomolecules. Additionally, recent progress in Raman spectroscopy for diagnosing a multitude of diseases ranging from cancer to infection is also presented. The second part of this article focuses on applications of Raman spectroscopy to materials. As a first example, Raman spectroscopy of a melt cast explosives formulation was carried out to monitor the changes in the peaks which indicates the potential of this technique for remote process monitoring. The second example presents various modern methods of Raman spectroscopy such as spatially offset Raman spectroscopy (SORS), reflection, transmission and universal multiple angle Raman spectroscopy (UMARS) to study layered materials. Studies on chemicals/layered materials hidden in non-metallic containers using the above variants are presented. Using suitable examples, it is shown how a specific excitation or collection geometry can yield different information about the location of materials. Additionally, it is shown that UMARS imaging can also be used as an effective tool to obtain layer specific information of materials located at depths beyond a few centimeters.

Raman spectroscopy explores molecular structural signatures of hidden materials in depth: Universal Multiple Angle Raman Spectroscopy.

Non-invasive 3D imaging in materials and medical research involves methodologies such as X-ray imaging, MRI, fluorescence and optical coherence tomography, NIR absorption imaging, etc., providing global morphological/density/absorption changes of the hidden components. However, molecular information of such buried materials has been elusive. In this article we demonstrate observation of molecular structural information of materials hidden/buried in depth using Raman scattering. Typically, Raman spectroscopic observations are made at fixed collection angles, such as, 90°, 135°, and 180°, except in spatially offset Raman scattering (SORS) (only back scattering based collection of photons) and transmission techniques. Such specific collection angles restrict the observations of Raman signals either from or near the surface of the materials. Universal Multiple Angle Raman Spectroscopy (UMARS) presented here employs the principle of (a) penetration depth of photons and then diffuse propagation through non-absorbing media by multiple scattering and (b) detection of signals from all the observable angles.

Is chemically synthesized graphene 'really' a unique substrate for SERS and fluorescence quenching?

We demonstrate observation of Raman signals of different analytes adsorbed on carbonaceous materials, such as, chemically reduced graphene, graphene oxide (GO), multi-walled carbon nanotube (MWCNT), graphite and activated carbon. The analytes selected for the study were Rhodamine 6G (R6G) (in resonant conditions), Rhodamine B (RB), Nile blue (NBA), Crystal Violet (CV) and acetaminophen (paracetamol). All the analytes except paracetamol absorb and fluoresce in the visible region. In this article we provide experimental evidence of the fact that observation of Raman signals of analytes on such carbonaceous materials are more due to resonance effect, suppression of fluorescence and efficient adsorption and that this property in not unique to graphene or nanotubes but prevalent for various type of carbon materials.