Circular Polarization Conversion in Single Plasmonic Spherical Particles.

Temporal and spectral behaviors of plasmons determine their ability to enhance the characteristics of metamaterials tailored to a wide range of applications, including electric-field enhancement, hot-electron injection, sensing, as well as polarization and angular momentum manipulation. We report a dark-field (DF) polarimetry experiment on single particles with incident circularly polarized light in which gold nanoparticles scatter with opposite handedness at visible wavelengths. Remarkably, for silvered nanoporous silica microparticles, the handedness conversion occurs at longer visible wavelengths, only after adsorption of molecules on the silver. Finite element analysis (FEA) allows matching the circular polarization (CP) conversion to dominant quadrupolar contributions, determined by the specimen size and complex susceptibility. We hypothesize that the damping accompanying the adsorption of molecules on the nanostructured silver facilitates the CP conversion. These results offer new perspectives in molecule sensing and materials tunability for light polarization conversion and control of light spin angular momentum at submicroscopic scale.

Control of piezoelectricity in amino acids by supramolecular packing.

Piezoelectricity, the linear relationship between stress and induced electrical charge, has attracted recent interest due to its manifestation in biological molecules such as synthetic polypeptides or amino acid crystals, including gamma (γ) glycine. It has also been demonstrated in bone, collagen, elastin and the synthetic bone mineral hydroxyapatite. Piezoelectric coefficients exhibited by these biological materials are generally low, typically in the range of 0.1-10 pm V-1, limiting technological applications. Guided by quantum mechanical calculations we have measured a high shear piezoelectricity (178 pm V-1) in the amino acid crystal beta (ß) glycine, which is of similar magnitude to barium titanate or lead zirconate titanate. Our calculations show that the high piezoelectric coefficients originate from an efficient packing of the molecules along certain crystallographic planes and directions. The highest predicted piezoelectric voltage constant for ß-glycine crystals is 8 V mN-1, which is an order of magnitude larger than the voltage generated by any currently used ceramic or polymer.

Racemic Amino Acid Piezoelectric Transducer.

Single crystal L-amino acids can exhibit technologically useful piezoelectric and nonlinear optical properties. Here we predict, using density functional theory, the piezoelectric charge and strain and voltage tensors of the racemic amino acid DL alanine, and use the modeling data to guide the first macroscopic and nanoscopic piezoelectric measurements on DL-alanine single crystals and polycrystalline aggregates. We demonstrate voltage generation of up to 0.8 V from DL-alanine crystal films under simple manual compression, twice as high as other amino acid crystals. Our results suggest that net molecular chirality is not a prerequisite for piezoelectric behavior in organic crystals. The transducer presented herein demonstrates that DL-alanine crystals can be used in applications such as temperature and force measurement in biosensors, data storage in flexible electronic devices, and mechanical actuation in energy harvesters.

Thermal effects of mobile phones on human auricle region.

Mobile phones have become an indispensable utility to modern society, with international use increasing dramatically each year. The GSM signal operates at 900 MHz, 1800 MHz and 2250 MHz, may potentially cause harm to human tissue. Yet there is no in silico model to aid design these devices to protect from causing potential thermal effect. Here we present a model of sources of heating in a mobile phone device with experimental verification during the phone call. We have developed this mobile phone thermal model using first principles on COMSOL® Multiphysics modelling platform to simulate heating effect in human auricle region due to mobile phone use. In particular, our model considered both radiative and non-radiative heating from components such as the lithium ion battery, CPU circuitry and the antenna. The model showed the distribution and effect of the heating effect due to mobile phone use and considered impact of battery discharge rate, battery capacity, battery cathode material, biological tissue distance, antenna radio-wave frequency and intensity. Furthermore, the lithium ion battery heating was validated during experiments using temperature sensors with an excellent agreement between simulated and experimental data (<1% variation). Mobile phone heating during a typical call has also been simulated and compared with experimental infrared thermographic imaging. Importantly, we found that 1800 MHz frequency of data transmission showed the highest temperature increase in the fat/water phantom used in this simulation. We also successfully compared heating distribution in human auricle region during mobile phone use with clinical thermographic images with reasonable qualitative and quantitative agreements. In summary, our model provides a foundation to conceive thermal and other physical effects caused by mobile phone use and allow for the understanding of potential negative health effects thus supporting and promoting personalized and preventive medicine using thermography.

Surface plasmon propagation enhancement via bowtie antenna incorporation in Au-mica block waveguides.

The optimum geometry for waveguide propagation was determined by comparing bowtie and semicircle antenna cuts to a standard plain waveguide with a 635 nm laser. The results of both experimental data and COMSOL simulations proved that the bowtie antenna increased waveguide output in comparison to the plain waveguide with the semicircle pattern showing no enhancement. It was also determined that the propagation was highest when the polarization direction of the laser was perpendicular to the direction of the waveguide for all patterns, while polarization along the propagation direction led to little or no output in all antenna and plain waveguide cases. The waveguide output of the bowtie antenna and plain structures was then measured using a tunable laser for wavelengths from 570 nm to 958 nm under both parallel and perpendicular polarization conditions. The results indicated that the bowtie antenna performed better over the entire range with an average increase factor of 2.12±0.40 over the plain waveguide pattern when perpendicularly polarized to the waveguide direction, and 1.10±0.48 when parallel. The measured values indicate that the structure could have applications in broadband devices.

Spatial-domain filter enhanced subtraction microscopy and application to mid-IR imaging.

We have experimentally investigated the enhancement in spatial resolution by image subtraction in mid-infrared central solid-immersion lens (c-SIL) microscopy. The subtraction exploits a first image measured with the c-SIL point-spread function (PSF) realized with a Gaussian beam and a second image measured with the beam optically patterned by a silicon π-step phase plate, to realize a centrally hollow PSF. The intense sides lobes in both PSFs that are intrinsic to the SIL make the conventional weighted subtraction methods inadequate. A spatial-domain filter with a kernel optimized to match both experimental PSFs in their periphery was thus developed to modify the first image prior to subtraction, and this resulted in greatly improved performance, with polystyrene beads 1.4 ± 0.1 µm apart optically resolved with a mid-IR wavelength of 3.4 µm in water. Spatial-domain filtering is applicable to other PSF pairs, and simulations show that it also outperforms conventional subtraction methods for the Gaussian and doughnut beams widely used in visible and near-IR microscopy.

Lithographically Defined, Room Temperature Low Threshold Subwavelength Red-Emitting Hybrid Plasmonic Lasers.

Hybrid plasmonic lasers provide deep subwavelength optical confinement, strongly enhanced light-matter interaction and together with nanoscale footprint promise new applications in optical communication, biosensing, and photolithography. The subwavelength hybrid plasmonic lasers reported so far often use bottom-up grown nanowires, nanorods, and nanosquares, making it difficult to integrate these devices into industry-relevant high density plasmonic circuits. Here, we report the first experimental demonstration of AlGaInP based, red-emitting hybrid plasmonic lasers at room temperature using lithography based fabrication processes. Resonant cavities with deep subwavelength 2D and 3D mode confinement of λ2/56 and λ3/199, respectively, are demonstrated. A range of cavity geometries (waveguides, rings, squares, and disks) show very low lasing thresholds of 0.6-1.8 mJ/cm2 with wide gain bandwidth (610 nm-685 nm), which are attributed to the heterogeneous geometry of the gain material, the optimized etching technique, and the strong overlap of the gain material with the plasmonic modes. Most importantly, we establish the connection between mode confinements and enhanced absorption and stimulated emission, which plays critical roles in maintaining low lasing thresholds at extremely small hybrid plasmonic cavities. Our results pave the way for the further integration of dense arrays of hybrid plasmonic lasers with optical and electronic technology platforms.

Doubling the far-field resolution in mid-infrared microscopy.

The spatial resolution in far-field mid-infrared (λ>2.5 µm) microscopy and micro-spectroscopy remains limited with the full-width at half maximum of the point-spread function ca. λ/1.3; a value that is very poor in comparison to that commonly accessible with visible and near-infrared optics. Hereafter, it is demonstrated however that polymer beads that are centre-to-centre spaced by λ/2.6 can be resolved in the mid-infrared. The more than 2-fold improvement in resolution in the far-field is achieved by exploiting a newly constructed scanning microscope built around a mid-infrared optical parametric oscillator and a central solid-immersion lens, and by enforcing the linear polarization unidirectional resolution enhancement with a novel and robust specimen error minimization based on a particle swarm optimization. The method is demonstrated with specimens immersed in air and in water, and its robustness shown by the analysis of dense and complex self-assembled bead islands.

Functionalizing hydrogen-bonded surface networks with self-assembled monolayers.

One of the central challenges in nanotechnology is the development of flexible and efficient methods for creating ordered structures with nanometre precision over an extended length scale. Supramolecular self-assembly on surfaces offers attractive features in this regard: it is a 'bottom-up' approach and thus allows the simple and rapid creation of surface assemblies, which are readily tuned through the choice of molecular building blocks used and stabilized by hydrogen bonding, van der Waals interactions, pi-pi bonding or metal coordination between the blocks. Assemblies in the form of two-dimensional open networks are of particular interest for possible applications because well-defined pores can be used for the precise localization and confinement of guest entities such as molecules or clusters, which can add functionality to the supramolecular network. Another widely used method for producing surface structures involves self-assembled monolayers (SAMs), which have introduced unprecedented flexibility in our ability to tailor interfaces and generate patterned surfaces. But SAMs are part of a top-down technology that is limited in terms of the spatial resolution that can be achieved. We therefore rationalized that a particularly powerful fabrication platform might be realized by combining non-covalent self-assembly of porous networks and SAMs, with the former providing nanometre-scale precision and the latter allowing versatile functionalization. Here we show that the two strategies can indeed be combined to create integrated network-SAM hybrid systems that are sufficiently robust for further processing. We show that the supramolecular network and the SAM can both be deposited from solution, which should enable the widespread and flexible use of this combined fabrication method.

Highly Efficient Inverted Light-Emitting Diodes Based on Vertically Aligned CdSe/CdS Nanorod Layers Fabricated by Electrophoretic Deposition.

Inverted colloidal-nanocrystal-based LEDs (NC-LEDs) are highly interesting and invaluable for large-scale display technology and flexible electronics. Semiconductor nanorods (NRs), in addition to the tunable wavelengths of the emitted light (achieved, for example, by the variation of the NR diameter or the diameter of core in a core-shell configuration), also exhibit linearly polarized emission, a larger Stokes shift, faster radiative decay, and slower bleaching kinetics than quantum dots (QDs). Despite these advantages, it is difficult to achieve void-free active NR layers using simple spin-coating techniques. Herein, we employ electrophoretic deposition (EPD) to make closely packed, vertically aligned CdSe/CdS core/shell nanorods (NRs) as the emissive layer. Following an inverted architecture, the device fabricated yields an external quantum efficiency (EQE) of 6.3% and a maximum luminance of 4320 cd/m2 at 11 V. This good performance can be attributed to the vertically aligned NR layer, enhancing the charge transport by reducing the resistance of carrier passage, which is supported by our finite element simulations. To the best of our knowledge, this is the first time vertically aligned NR layers made by EPD have been reported for the fabrication of NC-LEDs and the device performance is one of the best for inverted red NR-LEDs. The findings presented in this work bring forth a simple and effective technique for making vertically aligned NRs, and the mechanism behind the NR-LED device with enhanced performance using these NRs is illustrated. This technique may prove useful to the development of a vast class of nanocrystal-based optoelectronics, including solar cells and laser devices.

High resolution imaging with differential infrared absorption micro-spectroscopy.

Although confocal infrared (IR) absorption micro-spectroscopy is well established for far-field chemical imaging, its scope remains restricted since diffraction limits the spatial resolution to values a little above half the radiation wavelength. Yet, the successful implementations of below-the-diffraction limit far-field fluorescence microscopies using saturated irradiation patterns for example for stimulated-emission depletion and saturated structured-illumination suggest the possibility of using a similar optical patterning strategy for infrared absorption mapping at high resolution. Simulations are used to show that the simple mapping of the difference in transmitted/reflected IR energy between a saturated vortex-shaped beam and a Gaussian reference with a confocal microscope affords the generation of high-resolution vibrational absorption images. On the basis of experimentally relevant parameters, the simulations of the differential absorption scheme reveal a spatial resolution better than a tenth of the wavelength for incident energies about a decade above the saturation threshold. The saturated structured illumination concepts are thus expected to be compatible with the establishment of point-like point-spread functions for measuring the absorbance of samples with a scanning confocal microscope recording the differential transmission/reflection.

Heterogeneous nanotribological response of polymorphic self-assembled monolayers arising from domain and phase dependent friction.

Micro-/nanoelectromechanical systems demand robust ultrathin films for lubrication. As they can drastically modify the frictional properties of surfaces, few nanometers thick self-assembled monolayers (SAMs) constitute accepted candidates as boundary lubricants. Their high stability and easy preparation make them attractive also for low cost applications. Given their high order, organosulfur SAMs have been archetypal systems for structural investigations, but few efforts have been devoted to analyze the influence of lateral inhomogeneities on their surface properties. The impact on the frictional response of the surface due to the existence of crystalline domains with lateral dimension in the sub-micrometer range is considered here. To this end, two polymorphic structures of self-assembled monolayers of ω-(4'-methylbiphenyl-4-yl) butane-1-thiol coexisting on Au(111) are investigated by scanning tunneling and force microscopy. Described by rectangular 5√5 × 3 (α-phase) and oblique 6√3 × 2√3 (ß-phase) unit cells, they exhibit pronouncedly different frictional responses. The lateral nano-tribological heterogeneity of the surface is further influenced by the azimuthal orientation dependence of friction for each phase. In particular, this phenomenon is exploited in the less densely packed ß-phase for which the separate analysis of forward and backward lateral force scans is used to differentiate domains rotated 180°. The results demonstrate the level of structural control required in the design of SAMs for nano-tribology applications.

Quantitative surface free energy with micro-colloid probe pairs.

Measurement of the surface free energy (SFE) of a material allows the prediction of its adhesion properties. Materials can have microscale or sub-microscale surface inhomogeneities, engineered or random, which affect the surface macroscopic behaviour. However, quantitative characterization of the SFE at such length scales remains challenging in view of the variety of instruments and techniques available, the poor knowledge of critical variables and parameters during measurements and the need for appropriate contact models to derive the SFE from the measurements. Failure to characterize adhesion correctly may result in defective components or lengthy process optimization costing billions to industry. Conversely, for planar and homogeneous surfaces, contact angle (CA) measurements are standardized and allow for calculating the SFE using for example the Owen-Wendt model, relying only on the properties of the probing liquids. As such, we assessed and report here a method to correlate quantitative measurements of force-distance curves made with an atomic force microscope (AFM) and with silica and polystyrene (PS) colloidal probe pairs, with quantitative CA measurements and CA-derived SFE values. We measured five surfaces (mica, highly oriented pyrolytic graphite, thermally grown silica on silicon, silicon, and silicon with a super-hydrophobic coating), ranging from hydrophilic to super-hydrophobic, and found an excellent classification of the AFM measurements when these are represented by a set of principal components (PCs), and when both silica and PS colloidal probes are considered together. A regression of the PCs onto the CA measurements allows recovery of the SFE at the length scale of the colloidal probes, which is here ca. 1 micron. We found that once the PC-regression model is built, test sets of only ten AFM force-distance curves are sufficient to predict the local SFE with the calibrated silica and PS colloidal probes.

A framework for far-field infrared absorption microscopy beyond the diffraction limit.

A framework is proposed for infrared (IR) absorption microscopy in the far-field with a spatial resolution below the diffraction limit. The sub-diffraction resolution is achieved by pumping a transient contrast in the population of a selected vibrational mode with IR pulses that exhibit alternating central minima and maxima, and by probing the corresponding absorbance at the same wavelength with adequately delayed Gaussian pulses. Simulations have been carried out on the basis of empirical parameters emulating patterned thin films of octadecyltrichlorosilane and a resolution of 250 nm was found when probing the CH2 stretches at 3.5 µm with pump energies less than ten times the vibrational saturation threshold.

Cadmium selenide sulfide quantum dots with tuneable emission profiles: An electrochemiluminescence platform for the determination of TIMP-1 protein.

The development of electrochemiluminescent (ECL) luminophores with tuneable emission profiles is a key requirement in the development of multi-analyte ECL sensing platforms. This study presents the first reported use of cadmium selenide sulfide (CdSeS) quantum dots (QDs) as ECL emitters in which both the ECL emission profile and cathodic potential can be tailored by alteration of the Se/S ratio. CdSeS QDs were synthesised using an aqueous synthetic route thereby avoiding the use of organic reagents, high temperatures and inert gasses. The suitability of the CdSeS QDs to ECL sensing applications is demonstrated via the quantitative determination of TIMP-1 protein at clinically relevant concentrations. The developed cathodic ECL immunosensor exhibited a detectable linear range of 6-60 ng/mL and a limit of detection (LOD) of 1.54 ng/mL. TIMP-1 protein plays a crucial role in pregnancy, wound healing, and cancer prognosis.

Electrodeposition of palladium onto a pyridine-terminated self-assembled monolayer.

The electrodeposition of Pd onto self-assembled monolayers (SAMs) of 3-(4-pyridine-4-ylphenyl)propane-1-thiol on Au(111) has been investigated by scanning tunneling microscopy. Two schemes are compared: One involves an established two-step procedure where Pd(2+) ions are first coordinated to the pyridine moieties and subsequently reduced in Pd(2+)-free electrolyte. The second deposition routine involves electroreduction in an electrolyte containing low concentration of Pd(2+) which merges both steps and, thus, significantly simplifies metal deposition onto pyridine-terminated SAMs. Both strategies produce identical Pd nanoparticles (NPs) which exhibit a narrow size distribution and an apparent STM height of ∼2.4 nm. The observation of a Coulomb blockade and easy displacement of the nanoparticles in STM experiments evidence deposition on top of the SAM. The NPs are concluded to be essentially spherical. Growth of the NPs is found to be self-limiting since repeating the complexation-deposition cycle increases the density of the nanoparticles rather than their size but only close to full coverage. At high concentration of the Pd(2+) electrolyte, deposition on top of the SAM is impeded by a competitive mushroom-type growth.

Dark Field and Coherent Anti-Stokes Raman (DF-CARS) Imaging of Cell Uptake of Core-Shell, Magnetic-Plasmonic Nanoparticles.

Magnetic-plasmonic, Fe3O4-Au, core-shell nanoparticles are popular in many applications, most notably in therapeutics and diagnostics, and thus, the imaging of these nanostructures in biological samples is of high importance. These nanostructures are typically imaged in biological material by dark field scatter imaging, which requires an even distribution of nanostructures in the sample and, therefore, high nanoparticle doses, potentially leading to toxicology issues. Herein, we explore the nonlinear optical properties of magnetic nanoparticles coated with various thicknesses of gold using the open aperture z-scan technique to determine the nonlinear optical properties and moreover, predict the efficacy of the nanostructures in nonlinear imaging. We find that the magnetic nanoparticles coated with gold nanoseeds and thinner gold shells (ca. 4 nm) show the largest nonlinear absorption coefficient ß and imaginary part of the third-order susceptibility Im χ(3), suggesting that these nanostructures would be suitable contrast agents. Next, we combine laser dark field microscopy and epi-detected coherent anti-Stokes Raman (CARS) microscopy to image the uptake of magnetic-plasmonic nanoparticles in human pancreatic cancer cells. We show the epi-detected CARS technique is suitable for imaging of the magnetic-plasmonic nanoparticles without requiring a dense distribution of nanoparticles. This technique achieves superior nanoparticle contrasting over both epi-detected backscatter imaging and transmission dark field imaging, while also attaining label-free chemical contrasting of the cell. Lastly, we show the high biocompatibility of the Fe3O4 nanoparticles with ca. 4-nm thick Au shell at concentrations of 10-100 µg/mL.

A computational multilayer model to simulate hollow needle insertion into biological porcine liver tissue.

Modelling of needle insertion in soft tissue has developed significant interest in recent years due to its application in robot-assisted minimally invasive surgeries such as biopsies and brachytherapy. However, this type of surgery requires real-time feedback and processing which complex computational models may not be able to provide. In contrast to the existing mechanics-based kinetic models, a simple multilayer tissue model using a Coupled Eulerian Lagrangian based Finite Element method has been developed using the dynamic principle. The model simulates the needle motion for flexible hollow bevel-angled needle (15° and 30°, 22 Gauge) insertion into porcine liver tissue, which includes material parameters obtained from unconfined compression testing of porcine liver tissue. To validate simulation results, needle insertion force and cutting force within porcine liver tissue were compared with corresponding experimental results obtained from a custom-built needle insertion system. For the 15° and 30° bevel-angle needles, the percentage error for cutting force (mean) of each needle compared to computational model, were 18.7% and 11.9% respectively. Varying the needle bevel angle from 30° to 15° results in an increase of the cutting force, but insertion force does not vary among the tested bevel angles. The validation of this computationally efficient multilayer Finite Element model can help engineers to better understand the biomechanical behaviour of medical needle inside soft biological tissue. Ultimately, this multilayer approach can help advance state-of-art clinical applications such as robot-assisted surgery that requires real-time feedback and processing. STATEMENT OF SIGNIFICANCE: The significance of the work is in confirming the effectiveness of multilayer material based finite element (FE) method to model biopsy needle insertion into soft biological porcine liver tissue. A multilayer Coupled Eulerian Lagrangian (CEL) based FE modelling technique allowed testing of heterogeneous, non-linear viscoelastic porcine liver tissue in a system, so direct comparison of needle tissue interaction forces on the intrinsic material (tissue) behaviour could be made. To the best of the authors' knowledge, the present research investigates for the first time modelling of a three dimensional (3D) hollow needle insertion using a multilayer stiffness model of biological tissue using FE based CEL method and presents a comparison of simulation results with experimental data.

Photo-responsive functional gold nanocapsules for inactivation of community-acquired, highly virulent, multidrug-resistant MRSA.

The indiscriminate and sporadic use of antibiotics has contributed to the emergence of drug resistance phenomenon in bacteria including but not limited to Staphylococcus aureus. These drug-resistant bacteria have been threatening safety in hospitals and adversely affecting human health. Here we report a strategy to design photo-stimulated theranostic nanoprobes against methicillin-resistant Staphylococcus aureus (MRSA) "superbug" USA300. The nanocapsule probe is based on gold nanorods (GNRs) coated with pegylated thiol, mPEG-SH, which has been further modified by adding successively a natural antibacterial compound such as curcumin, and a cell targeting deoxyribonucleic acid (DNA) aptamer. We have used this novel gold nanocapsules for near-infrared (NIR) photophysical stimulation against pathogenic bacteria. We have found that the novel nanocapsule blocks biofilm formation and kills bacteria by photothermal action that causes disruption of the bacterial cell wall and membrane. In this approach, multiple drug-resistant Staphylococcus aureus has been captured by these nanocapsules through DNA aptamer targeting. All of the trapped bacteria could be killed in 30 minutes during the NIR stimulation due to the combination of photothermal effect, the generation of reactive oxygen species (ROS) and a loss of transmembrane potential (Δψ). Importantly we did not notice any resistance developed against the photothermal treatment. This is remarkable from an anti-biofilm activity point of view. Importantly, these multifunctional nanocapsules have also shown a surface enhanced Raman spectroscopy (SERS) effect, which could be used to evaluate the success of the inactivation effect during treatment. These results indicate that nanocapsule-based photo treatment can be an alternative antibacterial strategy without contributing to antibiotic resistance, and thus can be used for both environmental and therapeutic applications.

A Piezoelectric Ionic Cocrystal of Glycine and Sulfamic Acid.

Cocrystallization of two or more molecular compounds can dramatically change the physicochemical properties of a functional molecule without the need for chemical modification. For example, coformers can enhance the mechanical stability, processability, and solubility of pharmaceutical compounds to enable better medicines. Here, we demonstrate that amino acid cocrystals can enhance functional electromechanical properties in simple, sustainable materials as exemplified by glycine and sulfamic acid. These coformers crystallize independently in centrosymmetric space groups when they are grown as single-component crystals but form a noncentrosymmetric, electromechanically active ionic cocrystal when they are crystallized together. The piezoelectricity of the cocrystal is characterized using techniques tailored to overcome the challenges associated with measuring the electromechanical properties of soft (organic) crystals. The piezoelectric tensor of the cocrystal is mapped using density functional theory (DFT) computer models, and the predicted single-crystal longitudinal response of 2 pC/N is verified using second-harmonic generation (SHG) and piezoresponse force microscopy (PFM). The experimental measurements are facilitated by polycrystalline film growth that allows for macroscopic and nanoscale quantification of the longitudinal out-of-plane response, which is in the range exploited in piezoelectric technologies made from quartz, aluminum nitride, and zinc oxide. The large-area polycrystalline film retains a damped response of ≥0.2 pC/N, indicating the potential for application of such inexpensive and eco-friendly amino acid-based cocrystal coatings in, for example, autonomous ambient-powered devices in edge computing.