Plasmon-Enhanced Digital Fluoroimmunoassay for Subfemtomolar Detection of Protein Biomarkers.

Rapid and accurate quantification of low-abundance protein biomarkers in biofluids can transform the diagnosis of a range of pathologies, including infectious diseases. Here, we harness ultrabright plasmonic fluors as "digital nanolabels" and demonstrate the detection and quantification of subfemtomolar concentrations of human IL-6 and SARS-CoV-2 alpha and variant proteins in clinical nasopharyngeal swab and saliva samples from COVID-19 patients. The resulting digital plasmonic fluor-linked immunosorbent assay (digital p-FLISA) enables detection of SARS-CoV-2 nucleocapsid protein, both in solution and in live virions. Digital p-FLISA outperforms the "gold standard" enzyme-linked immunosorbent assay (ELISA), having a nearly 7000-fold lower limit-of-detection, and outperforms a commercial antigen test, having over 5000-fold improvement in analytical sensitivity. Detection and quantification of very low concentrations of target proteins holds potential for early detection of pathological conditions, treatment monitoring, and personalized medicine.

Microneedle patch-based enzyme-linked immunosorbent assay to quantify protein biomarkers of tuberculosis.

There is a clinical need for differential diagnosis of the latent versus active stages of tuberculosis (TB) disease by a simple-to-administer test. Alpha-crystallin (Acr) and early secretory antigenic target-6 (ESAT-6) are protein biomarkers associated with the latent and active stages of TB, respectively, and could be used for differential diagnosis. We therefore developed a microneedle patch (MNP) designed for application to the skin to quantify Acr and ESAT-6 in dermal interstitial fluid by enzyme-linked immunosorbent assay (ELISA). We fabricated mechanically strong microneedles made of polystyrene and coated them with capture antibodies against Acr and ESAT-6. We then optimized assay sensitivity to achieve a limit of detection of 750 pg/ml and 3,020 pg/ml for Acr and ESAT-6, respectively. This study demonstrates the feasibility of an MNP-based ELISA for differential diagnosis of latent TB disease.

Plasmon-Enhanced Expansion Microscopy.

Expansion microscopy (ExM) is a rapidly emerging super-resolution microscopy technique that involves isotropic expansion of biological samples to improve spatial resolution. However, fluorescence signal dilution due to volumetric expansion is a hindrance to the widespread application of ExM. Here, we introduce plasmon-enhanced expansion microscopy (p-ExM) by harnessing an ultrabright fluorescent nanoconstruct, called plasmonic-fluor (PF), as a nanolabel. The unique structure of PFs renders nearly 15000-fold brighter fluorescence signal intensity and higher fluorescence retention following the ExM protocol (nearly 76%) compared to their conventional counterparts (<16% for IR-650). Individual PFs can be easily imaged using conventional fluorescence microscopes, making them excellent "digital" labels for ExM. We demonstrate that p-ExM enables improved tracing and decrypting of neural networks labeled with PFs, as evidenced by improved quantification of morphological markers (nearly a 2.5-fold increase in number of neurite terminal points). Overall, p-ExM complements the existing ExM techniques for probing structure-function relationships of various biological systems.

Ultrasensitive, Multiplexed Buoyant Sensor for Monitoring Cytokines in Biofluids.

Multiplexed quantification of low-abundance protein biomarkers in complex biofluids is important for biomedical research and clinical diagnostics. However, in situ sampling without perturbing biological systems remains challenging. In this work, we report a buoyant biosensor that enables in situ monitoring of protein analytes at attomolar concentrations with a 15 min temporal resolution. The buoyant biosensor implemented with fluorescent nanolabels enabled the ultrasensitive and multiplexed detection and quantification of cytokines. Implementing the biosensor in a digital manner (i.e., counting the individual nanolabels) further improves the low detection limit. We demonstrate that the biosensor enables the detection and quantification of the time-varying concentrations of cytokines (e.g., IL-6 and TNF-α) in macrophage culture media without perturbing the live cells. The easy-to-apply biosensor with attomolar sensitivity and multiplexing capability can enable an in situ analysis of protein biomarkers in various biofluids and tissues to aid in understanding biological processes and diagnosing and treating diverse diseases.

Photonic-Plasmonic Coupling Enhanced Fluorescence Enabling Digital-Resolution Ultrasensitive Protein Detection.

Assays utilizing fluorophores are common throughout life science research and diagnostics, although detection limits are generally limited by weak emission intensity, thus requiring many labeled target molecules to combine their output to achieve higher signal-to-noise. We describe how the synergistic coupling of plasmonic and photonic modes can significantly boost the emission from fluorophores. By optimally matching the resonant modes of a plasmonic fluor (PF) nanoparticle and a photonic crystal (PC) with the absorption and emission spectrum of the fluorescent dye, a 52-fold improvement in signal intensity is observed, enabling individual PFs to be observed and digitally counted, where one PF tag represents one detected target molecule. The amplification can be attributed to the strong near-field enhancement due to the cavity-induced activation of the PF, PC band structure-mediated improvement in collection efficiency, and increased rate of spontaneous emission. The applicability of the method by dose-response characterization of a sandwich immunoassay for human interleukin-6, a biomarker used to assist diagnosis of cancer, inflammation, sepsis, and autoimmune disease is demonstrated. A limit of detection of 10 fg mL-1 and 100 fg mL-1 in buffer and human plasma respectively, is achieved, representing a capability nearly three orders of magnitude lower than standard immunoassays.

Surface Functional Groups Affect Iron (Hydr)oxide Heterogeneous Nucleation: Implications for Membrane Scaling.

Because of its favorable thermodynamics and fast kinetics, heterogeneous solid nucleation on membranes triggers early-stage mineral scaling. Iron (hydr)oxide, a typical membrane scale, initially forms as nanoparticles that interact with surface functional groups on membranes, but these nanoscale phenomena are difficult to observe in real time. In this study, we utilized in situ grazing incidence small angle X-ray scattering and ex situ atomic force microscopy to examine the heterogeneous nucleation of iron (hydr)oxide on surface functional groups commonly used in membranes, including hydroxyl (OH), carboxyl (COOH), and fluoro (F) groups. We found that, compared to nucleation on hydrophilic OH- and COOH-surfaces, the high hydrophobicity of an F-modified surface significantly reduced the extents of both heterogeneously and homogeneously formed iron (hydr)oxide nucleation. Moreover, on the OH-surface, the high functional group density of 0.76 nmol/cm2 caused faster heterogeneous nucleation than that on a COOH-surface, with a density of 0.28 ± 0.04 nmol/cm2. The F-surface also had the highest heterogeneous nucleation energy barrier (26 ± 0.6 kJ/mol), followed by COOH- (23 ± 0.8 kJ/mol) and OH- (20 ± 0.9 kJ/mol) surfaces. The kinetic and thermodynamic information provided here will help us better predict the rates and extents of early-stage scaling of iron (hydr)oxide nanoparticles in membrane processes.

Bio-Templated Chiral Zeolitic Imidazolate Framework for Enantioselective Chemoresistive Sensing.

Chiral metal-organic frameworks (MOFs) have gained rising attention as ordered nanoporous materials for enantiomer separations, chiral catalysis, and sensing. Among those, chiral MOFs are generally obtained through complex synthetic routes by using a limited choice of reactive chiral organic precursors as the primary linkers or auxiliary ligands. Here, we report a template-controlled synthesis of chiral MOFs from achiral precursors grown on chiral nematic cellulose-derived nanostructured bio-templates. We demonstrate that chiral MOFs, specifically, zeolitic imidazolate framework (ZIF), unc-[Zn(2-MeIm)2 , 2-MeIm=2-methylimidazole], can be grown from regular precursors within nanoporous organized chiral nematic nanocelluloses via directed assembly on twisted bundles of cellulose nanocrystals. The template-grown chiral ZIF possesses tetragonal crystal structure with chiral space group of P41 , which is different from traditional cubic crystal structure of I-43 m for freely grown conventional ZIF-8. The uniaxially compressed dimensions of the unit cell of templated ZIF and crystalline dimensions are signatures of this structure. We observe that the templated chiral ZIF can facilitate the enantiotropic sensing. It shows enantioselective recognition and chiral sensing abilities with a low limit of detection of 39 µM and the corresponding limit of chiral detection of 300 µM for representative chiral amino acid, D- and L- alanine.

Plasmonically Enhanced Ultrasensitive Epitope-Specific Serologic Assay for COVID-19.

Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has rapidly spread and resulted in the global pandemic of COVID-19. Although IgM/IgG serology assay has been widely used, with the entire spike or nucleocapsid antigens, they only indicate the presence or absence of antibodies against these proteins but are not specific to the neutralization antibodies, therefore providing only generic information about infection stage and possible future immune protection. Novel technologies enabling easy-to-use and sensitive detection of multiple specific antibodies simultaneously will facilitate precise diagnosis of infection stage, prediction of clinical outcomes, and evaluation of future immune protection upon viral exposure or vaccination. Here, we demonstrate a rapid and ultrasensitive quantification method for epitope-specific antibodies, including different isotypes and subclasses, in a multiplexed manner. Using an ultrabright fluorescent nanolabel, plasmonic-fluor, this novel assay can be completed in 20 min and more importantly, the limit of detection of the plasmon-enhanced immunoassay for SARS-CoV-2 antibodies is as much as 100-fold lower compared to the assays relying on enzymatic amplification of colorimetric signals. Using convalescent patient plasma, we demonstrate that this biodetection method reveals the patient-to-patient variability in immune response as evidenced by the variations in whole protein and epitope-specific antibodies. This cost-effective, rapid, and ultrasensitive plasmonically enhanced multiplexed epitope-specific serological assay has the potential to be broadly employed in the detection of specific antibodies, which may benefit the advanced epidemiology studies and enable improvement of the clinical outcomes and prediction of the future protection against the SARS-CoV-2.

Ultrabright plasmonic fluor nanolabel-enabled detection of a urinary ER stress biomarker in autosomal dominant tubulointerstitial kidney disease.

Autosomal dominant tubulointerstitial kidney disease (ADTKD)-uromodulin (UMOD) is the most common nonpolycystic genetic kidney disease, but it remains unrecognized due to its clinical heterogeneity and lack of screening test. Moreover, the fact that the clinical feature is a poor predictor of disease outcome further highlights the need for the development of mechanistic biomarkers in ADTKD. However, low abundant urinary proteins secreted by thick ascending limb cells, where UMOD is synthesized, have posed a challenge for the detection of biomarkers in ADTKD-UMOD. In the CRISPR/Cas9-generated murine model and patients with ADTKD-UMOD, we found that immunoglobulin heavy chain-binding protein (BiP), an endoplasmic reticulum chaperone, was exclusively upregulated by mutant UMOD in the thick ascending limb and easily detected by Western blot analysis in the urine at an early stage of disease. However, even the most sensitive ELISA failed to detect urinary BiP in affected individuals. We therefore developed an ultrasensitive, plasmon-enhanced fluorescence-linked immunosorbent assay (p-FLISA) to quantify urinary BiP concentration by harnessing the newly invented ultrabright fluorescent nanoconstruct, termed "plasmonic Fluor." p-FLISA demonstrated that urinary BiP excretion was significantly elevated in patients with ADTKD-UMOD compared with unaffected controls, which may have potential utility in risk stratification, disease activity monitoring, disease progression prediction, and guidance of endoplasmic reticulum-targeted therapies in ADTKD.NEW & NOTEWORTHY Autosomal dominant tubulointerstitial kidney disease (ADTKD)-uromodulin (UMOD) is an underdiagnosed cause of chronic kidney disease (CKD). Lack of ultrasensitive bioanalytical tools has hindered the discovery of low abundant urinary biomarkers in ADTKD. Here, we developed an ultrasensitive plasmon-enhanced fluorescence-linked immunosorbent assay (p-FLISA). p-FLISA demonstrated that secreted immunoglobulin heavy chain-binding protein is an early urinary endoplasmic reticulum stress biomarker in ADTKD-UMOD, which will be valuable in monitoring disease progression and the treatment response in ADTKD.

Biopolymeric photonic structures: design, fabrication, and emerging applications.

Biological photonic structures can precisely control light propagation, scattering, and emission via hierarchical structures and diverse chemistry, enabling biophotonic applications for transparency, camouflaging, protection, mimicking and signaling. Corresponding natural polymers are promising building blocks for constructing synthetic multifunctional photonic structures owing to their renewability, biocompatibility, mechanical robustness, ambient processing conditions, and diverse surface chemistry. In this review, we provide a summary of the light phenomena in biophotonic structures found in nature, the selection of corresponding biopolymers for synthetic photonic structures, the fabrication strategies for flexible photonics, and corresponding emerging photonic-related applications. We introduce various photonic structures, including multi-layered, opal, and chiral structures, as well as photonic networks in contrast to traditionally considered light absorption and structural photonics. Next, we summarize the bottom-up and top-down fabrication approaches and physical properties of organized biopolymers and highlight the advantages of biopolymers as building blocks for realizing unique bioenabled photonic structures. Furthermore, we consider the integration of synthetic optically active nanocomponents into organized hierarchical biopolymer frameworks for added optical functionalities, such as enhanced iridescence and chiral photoluminescence. Finally, we present an outlook on current trends in biophotonic materials design and fabrication, including current issues, critical needs, as well as promising emerging photonic applications.

Photothermal Membrane Water Treatment for Two Worlds.

In meeting the increasing need for clean water in both developing and developed countries and in rural and urban communities, photothermal membrane water treatment technologies provide outstanding advantages: For developing countries and rural communities, by utilizing sunlight, photothermal membrane water treatment provides inexpensive, convenient, modular, decentralized, and accessible ways to clean water, which can reduce the consumption of conventional energy (e.g., electricity, natural gas) and the cost of clean water production. In developed countries and urban communities, photothermal membrane water treatment can improve the energy efficiency during water purification. In these water purification processes, the light absorption and light-to-heat conversion of photothermal materials are important factors in determining the membrane efficacy. Nanomaterials with well-controlled structure and optical properties can increase the light absorption and photothermal conversion of newly developed membranes. This Account introduces our recent work on developing scalable, cost-effective, and highly efficient photothermal membranes for four water purification applications: reverse osmosis (RO), ultrafiltration (UF), solar steam generation (SSG), and photothermal membrane distillation (PMD). By utilizing photothermal materials, first, we have demonstrated how sunlight can be used to improve the membrane's resistance to biofouling in RO and UF processes by photothermally induced inactivation of microorganisms. Second, we have developed novel SSG membranes (i.e., interfacial evaporators) that can harvest solar energy, convert it to localized heat, and generate clean water by evaporation. This desalination approach is particularly useful and promising for treatment of highly saline water. These new interfacial evaporators utilized graphene oxide (GO), reduced graphene oxide (RGO), molybdenum disulfide (MoS2), and polydopamine (PDA). The solar conversion efficiency and environmental sustainability of the interfacial evaporators were optimized via (i) novel and versatile bottom-up biofabrication (e.g., incorporation of photothermal materials during bacterial nanocellulose (BNC) growth) and (ii) easy and cost-effective top-down preparation (e.g., modification of natural wood with photothermal materials). Third, we have developed membranes for PMD that incorporate photothermal materials to generate heat under solar irradiation, thus providing a higher transmembrane temperature difference and higher driving force for effective vapor transport, making the membrane distillation process more energy-efficient. Lastly, this Account compares the photothermal membrane applications, summarizes current challenges for photothermal membrane applications, and offers future directions to facilitate the translation of photothermal membranes from the laboratory to large engineered systems by improving their scalability, stability, and sustainability.

Bioplasmonic paper-based assay for perilipin-2 non-invasively detects renal cancer.

Renal cell carcinoma (RCC) has poor survival prognosis because it is asymptomatic at an early, more curative stage. Recently, urine perilipin-2 (PLIN-2) was demonstrated to be a sensitive and specific biomarker for the noninvasive, early detection of RCC and an indispensable indicator to distinguish cancer from a benign renal mass. However, current Western blot or ELISA PLIN-2 assays are complicated, expensive, time-consuming or insensitive, making them unsuitable for routine analysis in clinical settings. Here we developed a plasmonic biosensor based on the high refractive index sensitivity of gold nanorattles for the rapid detection of PLIN-2 in patient urine. The paper-based plasmonic assay is highly sensitive and has a dynamic range of 50 pg/ml to 5 µg/ml PLIN-2. The assay is not compromised by variations in urine pH or high concentrations of interfering proteins such as albumin and hemoglobin, making it an excellent candidate for routine clinical applications. The urine PLIN-2 assay readily distinguished patients with pathologically proven clear cell carcinomas of various size, stage and grade (55.9 [39.5, 75.8] ng/ml, median [1st and 3rd quartile]) from age-matched controls (0.3 [0.3, 0.5] ng/ml), patients with bladder cancer (0.5 [0.4, 0.6] ng/ml) and patients with diabetic nephropathy (0.6 [0.4, 0.7] ng/ml). Urine PLIN-2 concentrations were roughly proportional to tumor size (Pearson coefficient 0.59). Thus, this cost-effective and label-free method represents a novel approach to conduct a non-invasive population screen or rapid differential diagnosis of imaged renal masses, significantly facilitating the early detection and diagnosis of RCC.

Bio-Optics and Bio-Inspired Optical Materials.

Through the use of the limited materials palette, optimally designed micro- and nanostructures, and tightly regulated processes, nature demonstrates exquisite control of light-matter interactions at various length scales. In fact, control of light-matter interactions is an important element in the evolutionary arms race and has led to highly engineered optical materials and systems. In this review, we present a detailed summary of various optical effects found in nature with a particular emphasis on the materials and optical design aspects responsible for their optical functionality. Using several representative examples, we discuss various optical phenomena, including absorption and transparency, diffraction, interference, reflection and antireflection, scattering, light harvesting, wave guiding and lensing, camouflage, and bioluminescence, that are responsible for the unique optical properties of materials and structures found in nature and biology. Great strides in understanding the design principles adapted by nature have led to a tremendous progress in realizing biomimetic and bioinspired optical materials and photonic devices. We discuss the various micro- and nanofabrication techniques that have been employed for realizing advanced biomimetic optical structures.

Photothermally Active Reduced Graphene Oxide/Bacterial Nanocellulose Composites as Biofouling-Resistant Ultrafiltration Membranes.

Biofouling poses one of the most serious challenges to membrane technologies by severely decreasing water flux and driving up operational costs. Here, we introduce a novel anti-biofouling ultrafiltration membrane based on reduced graphene oxide (RGO) and bacterial nanocellulose (BNC), which incoporates GO flakes into BNC in situ during its growth. In contrast to previously reported GO-based membranes for water treatment, the RGO/BNC membrane exhibited excellent aqueous stability under environmentally relevant pH conditions, vigorous mechanical agitation/sonication, and even high pressure. Importantly, due to its excellent photothermal property, under light illumination, the membrane exhibited effective bactericidal activity, obviating the need for any treatment of the feedwater or external energy. The novel design and in situ incorporation of the membranes developed in this study present a proof-of-concept for realizing new, highly efficient, and environmental-friendly anti-biofouling membranes for water purification.

Atomic force microscopy of phase separation on ruptured, giant unilamellar vesicles, and a mechanical pathway for the co-existence of lipid gel phases.

Giant unilamellar vesicles (GUVs) and supported lipid bilayers (SLBs) are synthetic model systems widely used in biophysical studies of lipid membranes. Although SLBs are advantageous for biophysical analysis, phase separation behaviors of lipid species in these two model systems can differ due to the lipid-substrate interactions that are present only for SLBs. In the present study, we report that in binary systems, certain phase domains on GUVs retain their original shapes and patterns after the GUVs rupture on glass surfaces. This enabled atomic force microscopy (AFM) experiments on phase domains, a procedure difficult to perform and interpret when applied to GUVs. Unusual phase behavior was evident in binary GUVs containing DLPC and either DPPC or DSPC. These DLPC/DSPC and DLPC/DPPC GUVs both presented the thermodynamic anomaly of having two co-existing gel phases. One phase (a bright phase) included a relatively high concentration of DiI-C20 but excluded Bodipy-HPC, and the other (dark phase) excluded both probes. The bright phases are of interest because they seem to stabilize dark phases against coalescence. Results suggested that the gel phases labeled by DiIC20 in the DLPC/DSPC membrane, which surround the dark gel phase, is an extra layer of membrane, indicating a highly curved structure that might stabilize the interior dark domains, thereby enabling the co-existence of two different gel phases. Results show the utility of AFM on collapsed GUVs, and suggest a possible mechanism for stabilization of lipid domains.

Extreme Mechanical Behavior of Nacre-Mimetic Graphene-Oxide and Silk Nanocomposites.

Biological materials have the ability to withstand extreme mechanical forces due to their unique multilevel hierarchical structure. Here, we fabricated a nacre-mimetic nanocomposite comprised of silk fibroin and graphene oxide that exhibits hybridized dynamic responses arising from alternating high-contrast mechanical properties of the components at the nanoscale. Dynamic mechanical behavior of these nanocomposites is assessed through a microscale ballistic characterization using a 7.6 µm diameter silica sphere moving at a speed of approximately 400 m/s. The volume fraction of graphene oxide in these composites is systematically varied from 0 to 32 vol % to quantify the dynamic effects correlating with the structural morphologies of the graphene oxide flakes. Specific penetration energy of the films rapidly increases as the distribution of graphene oxide flakes evolves from noninteracting, isolated sheets to a partially overlapping continuous sheet. The specific penetration energy of the nanocomposite at the highest graphene oxide content tested here is found to be significantly higher than that of Kevlar fabrics and close to that of pure multilayer graphene. This study evidently demonstrates that the morphologies of nanoscale constituents and their interactions are critical to realize scalable high-performance nanocomposites using typical nanomaterial constituents having finite dimensions.

Environmental Stability of Plasmonic Biosensors Based on Natural versus Artificial Antibody.

Plasmonic biosensors based on the refractive index sensitivity of localized surface plasmon resonance (LSPR) are considered to be highly promising for on-chip and point-of-care biodiagnostics. However, most of the current plasmonic biosensors employ natural antibodies as biorecognition elements, which can easily lose their biorecognition ability upon exposure to environmental stressors (e.g., temperature and humidity). Plasmonic biosensors relying on molecular imprints as recognition elements (artificial antibodies) are hypothesized to be an attractive alternative for applications in resource-limited settings due to their excellent thermal, chemical, and environmental stability. In this work, we provide a comprehensive comparison of the stability of plasmonic biosensors based on natural and artificial antibodies. Although the natural antibody-based plasmonic biosensors exhibit superior sensitivity, their stability (temporal, thermal, and chemical) was found to be vastly inferior to those based on artificial antibodies. Our results convincingly demonstrate that these novel classes of artificial antibody-based plasmonic biosensors are highly attractive for point-of-care and resource-limited conditions where tight control over transport, storage, and handling conditions is not possible.

Metal-Organic Framework Encapsulation for the Preservation and Photothermal Enhancement of Enzyme Activity.

Interfacing biomolecules with functional materials is a key strategy toward achieving externally-triggered biological function. The rational integration of functional proteins, such as enzymes, with plasmonic nanostructures that exhibit unique optical properties such as photothermal effect provides a means to externally control the enzyme activity. However, due to the labile nature of enzymes, the photothermal effect of plasmonic nanostructures is mostly utilized for the enhancement of the biocatalytic activity of thermophilic enzymes. In order to extend and utilize the photothermal effect to a broader class of enzymes, a means to stabilize the immobilized active protein is essential. Inspired by biomineralization for the encapsulation of soft tissue within protective exteriors in nature, metal-organic framework is utilized to stabilize the enzyme. This strategy provides an effective route to enhance and externally modulate the biocatalytic activity of enzymes bound to functional nanostructures over a broad range of operating environments that are otherwise hostile to the biomolecules.

Catalytically Active Bacterial Nanocellulose-Based Ultrafiltration Membrane.

Large quantities of highly toxic organic dyes in industrial wastewater is a persistent challenge in wastewater treatment processes. Here, for highly efficient wastewater treatment, a novel membrane based on bacterial nanocellulose (BNC) loaded with graphene oxide (GO) and palladium (Pd) nanoparticles is demonstrated. This Pd/GO/BNC membrane is realized through the in situ incorporation of GO flakes into BNC matrix during its growth followed by the in situ formation of palladium nanoparticles. The Pd/GO/BNC membrane exhibits highly efficient methylene orange (MO) degradation during filtration (up to 99.3% over a wide range of MO concentrations, pH, and multiple cycles of reuse). Multiple contaminants (a cocktail of 4-nitrophenol, methylene blue, and rhodamine 6G) can also be effectively treated by Pd/GO/BNC membrane simultaneously during filtration. Furthermore, the Pd/GO/BNC membrane demonstrates stable flux (33.1 L m-2 h-1 ) under 58 psi over long duration. The novel and robust membrane demonstrated here is highly scalable and holds a great promise for wastewater treatment.

Multifunctional Surface Modification of Nanodiamonds Based on Dopamine Polymerization.

Surface functionalization of nanodiamonds (NDs), which is of great interest in advanced material and therapeutic applications, requires the immobilization of functional species, such as nucleic acids, bioprobes, drugs, and metal nanoparticles, onto NDs' surfaces to form stable nanoconjugates. However, it is still challenging to modify the surface of NDs due to the complexity of their surface chemistry and the low density of each functional group on the surfaces of NDs. In this work, we demonstrate a general applicable surface functionalization approach for the preparation of ND-based core-shell nanoconjugates using dopamine polymerization. By taking advantage of the universal adhesion and versatile reactivity of polydopamine, we have effectively conjugated DNA and silver nanoparticles onto NDs. Moreover, the catalytic activity of ND-supported silver nanoparticle was characterized by the reduction of 4-nitrophenol, and the addressability of NDs was tested through DNA hybridization that formed satellite ND-gold nanorod conjugation. This simple and robust method we have presented may significantly improve the capability for attaching various functionalities onto NDs and open up new platforms for applications of NDs.