Chemo-mechanical failure mechanisms of the silicon anode in solid-state batteries.

Silicon is a promising anode material due to its high theoretical specific capacity, low lithiation potential and low lithium dendrite risk. Yet, the electrochemical performance of silicon anodes in solid-state batteries is still poor (for example, low actual specific capacity and fast capacity decay), hindering practical applications. Here the chemo-mechanical failure mechanisms of composite Si/Li6PS5Cl and solid-electrolyte-free silicon anodes are revealed by combining structural and chemical characterizations with theoretical simulations. The growth of the solid electrolyte interphase at the Si|Li6PS5Cl interface causes severe resistance increase in composite anodes, explaining their fast capacity decay. Solid-electrolyte-free silicon anodes show sufficient ionic and electronic conductivities, enabling a high specific capacity. However, microscale void formation during delithiation causes larger mechanical stress at the two-dimensional interfaces of these anodes than in composite anodes. Understanding these chemo-mechanical failure mechanisms of different anode architectures and the role of interphase formation helps to provide guidelines for the design of improved electrode materials.

Vacancy-Enhanced Sb-N4 Sites for the Oxygen Reduction Reaction and Zn-Air Battery.

With the advantages of a Fenton-inactive characteristic and unique p electrons that can hybridize with O2 molecules, p-block metal-based single-atom catalysts (SACs) for the oxygen reduction reaction (ORR) have tremendous potential. Nevertheless, their undesirable intrinsic activity caused by the closed d10 electronic configuration remains a major challenge. Herein, an Sb-based SAC featuring carbon vacancy-enhanced Sb-N4 active centers, corroborated by the results of high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure, has been developed for an incredibly effective ORR. The obtained SbSA-N-C demonstrates a positive half-wave potential of 0.905 V and excellent structural stability in alkaline environments. Density functional theory calculations reveal that the carbon vacancies weaken the adsorption between Sb atoms and the OH* intermediate, thus promoting the ORR performance. Practically, the SbSA-N-C-based Zn-air batteries achieve impressive outcomes, such as a high power density of 181 mW cm-2, showing great potential in real-world applications.

Heterogeneous Rhodium Single-Atom-Site Catalyst Enables Chemoselective Carbene N-H Bond Insertion.

Transition-metal-catalyzed carbene insertion reactions of a nitrogen-hydrogen bond have emerged as robust and versatile methods for the construction of C-N bonds. While significant progress of homogeneous catalytic metal carbene N-H insertions has been achieved, the control of chemoselectivity in the field remains challenging due to the high electrophilicity of the metal carbene intermediates. Herein, we present an efficient strategy for the synthesis of a rhodium single-atom-site catalyst (Rh-SA) that incorporates a Rh atom surrounded by three nitrogen atoms and one phosphorus atom doped in a carbon support. This Rh-SA catalyst, with a catalyst loading of only 0.15 mol %, exhibited exceptional catalytic performance for heterogeneous carbene insertion with various anilines and heteroaryl amines in combination with diazo esters. Importantly, the heterogeneous catalyst selectively transformed aniline derivatives bearing multiple nucleophilic moieties into single N-H insertion isomers, while the popular homogeneous Rh2(OAc)4 catalyst produced a mixture of overfunctionalized side products. Additionally, similar selectivities for N-H bond insertion with a set of stereoelectronically diverse diazo esters were obtained, highlighting the general applicability of this heterogeneous catalysis approach. On the basis of density functional theory calculations, the observed selectivity of the Rh-SA catalyst was attributed to the insertion barriers and the accelerated proton transfer assisted by the phosphorus atom in the support. Overall, this investigation of heterogeneous metal-catalyzed carbene insertion underscores the potential of single-atom-site catalysis as a powerful and complementary tool in organic synthesis.

Multifunctional Applications Enabled by Fluorination of Hexagonal Boron Nitride.

2D materials exhibit exceptional properties as compared to their macroscopic counterparts, with promising applications in nearly every area of science and technology. To unlock further functionality, the chemical functionalization of 2D structures is a powerful technique that enables tunability and new properties within these materials. Here, the successful effort to chemically functionalize hexagonal boron nitride (hBN), a chemically inert 2D ceramic with weak interlayer forces, using a gas-phase fluorination process is exploited. The fluorine functionalization guides interlayer expansion and increased polar surface charges on the hBN sheets resulting in a number of vastly improved applications. Specifically, the F-hBN exhibits enhanced dispersibility and thermal conductivity at higher temperatures by more than 75% offering exceptional performance as a thermofluid additive. Dispersion of low volumes of F-hBN in lubricating oils also offers marked improvements in lubrication and wear resistance for steel tribological contacts decreasing friction by 31% and wear by 71%. Additionally, incorporating numerous negatively charged fluorine atoms on hBN induces a permanent dipole moment, demonstrating its applicability in microelectronic device applications. The findings suggest that anchoring chemical functionalities to hBN moieties improves a variety of properties for h-BN, making it suitable for numerous other applications such as fillers or reinforcement agents and developing high-performance composite structures.

Tunable 2D Conjugated Porous Organic Polymer Films for Precise Molecular Nanofiltration and Optoelectronics.

Structural design of 2D conjugated porous organic polymer films (2D CPOPs), by tuning linkage chemistries and pore sizes, provides great adaptability for various applications, including membrane separation. Here, four free-standing 2D CPOP films of imine- or hydrazone-linked polymers (ILP/HLP) in combination with benzene (B-ILP/HLP) and triphenylbenzene (TPB-ILP/HLP) aromatic cores are synthesized. The anisotropic disordered films, composed of polymeric layered structures, can be exfoliated into ultrathin 2D-nanosheets with layer-dependent electrical properties. The bulk CPOP films exhibit structure-dependent optical properties, triboelectric nanogenerator output, and robust mechanical properties, rivaling previously reported 2D polymers and porous materials. The exfoliation energies of the 2D CPOPs and their mechanical behavior at the molecular level are investigated using density function theory (DFT) and molecular dynamics (MD) simulations, respectively. Exploiting the structural tunability, the comparative organic solvent nanofiltration (OSN) performance of six membranes having different pore sizes and linkages to yield valuable trends in molecular weight selectivity is investigated. Interestingly, the OSN performances follow the predicted transport modeling values based on theoretical pore size calculations, signifying the existence of permanent porosity in these materials. The membranes exhibit excellent stability in organic solvents at high pressures devoid of any structural deformations, revealing their potential in practical OSN applications.

A combined AIMD and DFT study of the low-energy radiation responses of GaN.

Although GaN is a promising candidate for semiconductor devices, degradation of GaN-based device performance may occur when the device is bombarded by high-energy charged particles during its application in aerospace, astronomy, and nuclear-related areas. It is thus of great significance to explore the influence of irradiation on the microstructure and electronic properties of GaN and to reveal the internal relationship between the damage mechanisms and physical characteristics. Using a combined density functional theory (DFT) and ab initio molecular dynamics (AIMD) study, we explored the low-energy recoil events in GaN and the effects of point defects on GaN. The threshold displacement energies (Eds) significantly depend on the recoil directions and the primary knock-on atoms. Moreover, the Ed values for nitrogen atoms are smaller than those for gallium atoms, indicating that the displacement of nitrogen dominates under electron irradiation and the created defects are mainly nitrogen vacancies and interstitials. The formation energy of nitrogen vacancies and interstitials is smaller than that for gallium vacancies and interstitials, which is consistent with the AIMD results. Although the created defects improve the elastic compliance of GaN, these radiation damage states deteriorate its ability to resist external compression. Meanwhile, these point defects lead the Debye temperature to decrease and thus increase the thermal expansion coefficients of GaN. As for the electronic properties of defective GaN, the point defects have various effects, i.e., VN (N vacancy), Gaint (Ga interstitial), Nint (N interstitial), and GaN (Ga occupying the N lattice site) defects induce the metallicity, and NGa (N occupying the Ga lattice site) defects decrease the band gap. The presented results provide underlying mechanisms for defect generation in GaN, and advance the fundamental understanding of the radiation resistances of semiconductor materials.

Synergistic Ni-W Dimer Sites Induced Stable Compressive Strain for Boosting the Performance of Pt as Electrocatalyst for the Oxygen Reduction Reaction.

Alloying Pt catalysts with transition metal elements is an effective pathway to enhance the performance of oxygen reduction reaction (ORR), but often accompanied with severe metal dissolution issue, resulting in poor stability of alloy catalysts. Here, instead of forming traditional alloy structure, we modify Pt surface with a novel Ni-W dimer structure by the atomic layer deposition (ALD) technique. The obtained NiW@PtC catalyst exhibits superior ORR performance both in liquid half-cell and practical fuel cell compared with initial Pt/C. It is discovered that strong synergistic Ni-W dimer structure arising from short atomic distance induced a stable compressive strain on the Pt surface, thus boosting Pt catalytic performance. This surface modification by synergistic dimer sites offers an effective strategy in tailoring Pt with excellent activity and stability, which provides a significant perspective in boosting the performance of commercial Pt catalyst modified with polymetallic atom sites.

Structural Self-Regulation-Promoted NO Electroreduction on Single Atoms.

Simultaneously elevating loading and activity of single atoms (SAs) is desirable for SA-containing catalysts, including single-atom catalysts (SACs). However, the fast self-nucleation of SAs limits the loading, and the activity is confined by the adsorption-energy scaling relationships on monotonous SAs. Here, we theoretically design a novel type of SA-containing catalyst generated by two-step structural self-regulation. In the thermodynamic self-regulation step, divacancies in graphene spontaneously pull up SAs from transition metal supports (dv-g/TM; TM = fcc Co, hcp Co, Ni, Cu), leading to the expectably high loading of SAs. The subsequent kinetic self-regulation step involving an adsorbate-assisted and reversible vacancy migration dynamically alters coordination environments of SAs, helping circumvent the scaling relationships, and consequently, the as-designed dv-g/Ni can catalyze NO-to-NH3 conversion at a low limiting potential of -0.25 V vs RHE.

Hexagonal Cobalt Nanosheets for High-Performance Electrocatalytic NO Reduction to NH3.

Electrocatalytic nitric oxide (NO) reduction not only provides an extremely promising strategy for ambient NH3 generation but also alleviates the artificially disrupted N-cycle balance. However, exploring efficient electrocatalysts to enhance the NO electroreduction performance remains a significant challenge. Herein, a hexagonal-close-packed Co nanosheet (hcp-Co) is prepared and exhibits a high NH3 yield of 439.50 µmol cm-2 h-1 and a Faraday efficiency of 72.58%, outperforming the face-centered cubic phase of the Co nanosheet (fcc-Co) and most reported electrocatalysts. Through the combination of density functional theory calculations and NO temperature-programmed desorption experiments, the superior catalytic NO reduction reaction (NORR) activity on the hcp-Co can be attributed to the unique electron structures and proton shuttle effect. A proof-of-concept device of Zn-NO batteries using the hcp-Co as the cathode is assembled and shows a power density of 4.66 mW cm-2, which is superior to the reported performance in the literature so far.

Defect Engineering of Graphene for Dynamic Reliability.

The interface between two-dimensional (2D) materials and soft, stretchable polymeric substrates is a governing criterion in proposed 2D materials-based flexible devices. This interface is dominated by weak van der Waals forces and there is a large mismatch in elastic constants between the contact materials. Under dynamic loading, slippage, and decoupling of the 2D material is observed, which then leads to extensive damage propagation in the 2D lattice. Herein, graphene is functionalized through mild and controlled defect engineering for a fivefold increase in adhesion at the graphene-polymer interface. Adhesion is characterized experimentally using buckling-based metrology, while molecular dynamics simulations reveal the role of individual defects in the context of adhesion. Under in situ cyclic loading, the increased adhesion inhibits damage initiation and interfacial fatigue propagation within graphene. This work offers insight into achieving dynamically reliable and robust 2D material-polymer contacts, which can facilitate the development of 2D materials-based flexible devices.

The effects of point defects on thermal-mechanical properties of BiCuOTe: a first-principles study.

Recently, BiCuOTe as a promising thermoelectric material has attracted extensive interest due to its lower thermal conductivity and higher electrical conductivity. However, little is known about the role of point defects in the growth, processing, and device degradation of this material. Moreover, the elastic properties which provide valuable information about the bonding characteristics, heat conductivity, and their anisotropic characters are investigated for effective design and characterization of new devices. Motivated by these considerations, a first-principles study about the stability of point defects and their effects on the thermal-mechanical properties of BiCuOTe was performed. The vacancies are found to be more stable than the interstitials. XO (here X occupying the O lattice site, with X = Cu, Bi or Te) are generally unfavorable among the considered point defects. Point defects generally have negative effects on elastic constants (except C66), suggesting that the resistance of defective systems to uniaxial and shear deformation is usually weaker than the that of ideal BiCuOTe. Similarly, point defects could deteriorate the ability to resist external compression. However, the introduction of point defects may improve the elastic compliances and depress the Debye temperature, which may increase the thermal expansion efficient of BiCuOTe. As compared with the ideal system, the point defects such as CuBi, TeBi, BiTe, OCu, CuTe and TeCu may generally reduce the phonon thermal conductivity. This study would provide insights into the effect of point defects on the elastic and thermal properties of BiCuOTe and has important implications in the rational design of superior thermoelectric materials.

Friction of Ti3C2Tx MXenes.

2D materials are well-known for their low-friction behavior by modifying the interfacial forces at atomic surfaces. Of the wide range of 2D materials, MXenes represent an emerging material class but their lubricating behavior has been scarcely investigated. Herein, the friction mechanisms of 2D Ti3C2Tx MXenes are demonstrated which are attributed to their surface terminations. We find that Ti3C2Tx MXenes do not exhibit the well-known frictional layer dependence of other 2D materials. Instead, the nanoscale lubricity of 2D MXenes is governed by the termination species resulting from synthesis. Annealing the MXenes demonstrate a 7% reduction in OH termination which translates to a 16-57% reduction of friction in agreement with DFT calculations. Finally, the stability of MXene flakes is demonstrated upon isolation from their aqueous environment. This work indicates that MXenes can provide sustainable lubricity at any thickness which makes them uniquely positioned among 2D material lubricants.

Machine learning-enabled band gap prediction of monolayer transition metal chalcogenide alloys.

Monolayer transition metal dichalcogenide (TMD) alloys with tunable direct band gaps have promising applications in nanoelectronics and optoelectronics. The composition-dependent band gaps of ternary, quaternary and quinary monolayer TMD alloys have been systematically studied combining density functional theory and machine learning models in the present study. The excellent agreement between the DFT-calculated band gaps and the ML-predicted values for the training, validation and test datasets demonstrates the accuracy of our machine learning based on a neural network model. It is found that the band gap bowing parameter is closely related to the difference between the band gaps of the endpoint material compositions of the monolayer TMD alloy and increases with increasing band gap difference. The band gap bowing effects of monolayer TMD alloys obtained by mixing different transition metals are attributed to the conduction band minimum positions, while those of monolayer TMD alloys obtained by mixing different chalcogen atoms are dominated by the valence band maximum positions. This study shows that monolayer TMD alloys with tunable direct band gaps can provide new opportunities for band gap engineering, as well as electronic and optoelectronic applications.

Fatigue of graphene.

Materials can suffer mechanical fatigue when subjected to cyclic loading at stress levels much lower than the ultimate tensile strength, and understanding this behaviour is critical to evaluating long-term dynamic reliability. The fatigue life and damage mechanisms of two-dimensional (2D) materials, of interest for mechanical and electronic applications, are currently unknown. Here, we present a fatigue study of freestanding 2D materials, specifically graphene and graphene oxide (GO). Using atomic force microscopy, monolayer and few-layer graphene were found to exhibit a fatigue life of more than 109 cycles at a mean stress of 71 GPa and a stress range of 5.6 GPa, higher than any material reported so far. Fatigue failure in monolayer graphene is global and catastrophic without progressive damage, while molecular dynamics simulations reveal this is preceded by stress-mediated bond reconfigurations near defective sites. Conversely, functional groups in GO impart a local and progressive fatigue damage mechanism. This study not only provides fundamental insights into the fatigue enhancement behaviour of graphene-embedded nanocomposites, but also serves as a starting point for the dynamic reliability evaluation of other 2D materials.

Defect evolution behaviors from single sulfur point vacancies to line vacancies in monolayer molybdenum disulfide.

Two-dimensional monolayer transition metal dichalcogenides (TMDs) are promising candidates for many novel nanoelectronic and optoelectronic applications due to their exceptional electronic, optical, chemical and mechanical properties. Experimentally, single chalcogen point vacancies caused by electron beam irradiation are found to agglomerate into line vacancy defects in monolayer TMDs. Herein, the corresponding defect evolution behaviors from single sulfur point vacancies to line vacancies in the monolayer molybdenum disulfide (MoS2) have been systematically studied using molecular dynamics and first principles calculations. The experimental observations of the defect evolution from single sulfur point vacancies to line vacancies are reproduced at the atomic level. The results indicate that the di-vacancy line defect and a point vacancy separated by a sulfur atom in a line evolve into tri-vacancy line defects, and the di-vacancy line defects can rotate 60° clockwise or counterclockwise. Moreover, two adjacent di-vacancy line defects with an angle of 120° can evolve into tri-vacancy line defects. High temperature and large vacancy concentrations promote the defect evolution from point vacancies to line vacancies. Intriguingly, compared with the randomly distributed point vacancy defects, the line vacancy defects formed after the defect evolution significantly decrease the mechanical properties, such as the ultimate strength, ultimate strain and Young's modulus of monolayer MoS2. In addition, the mechanical properties decrease with increasing vacancy concentration and temperature for the final configurations after defect evolution in monolayer MoS2 with different vacancy concentrations at different temperatures. The band gaps of monolayer MoS2 with line vacancy defects are smaller than those with randomly distributed point vacancy defects. Therefore, our study clarifies the defect evolution behaviors from single sulfur point vacancies to line vacancies in monolayer MoS2 and opens an opportunity for the novel nanoelectronic and optoelectronic applications of monolayer TMDs.

Synergistic vacancy defects and mechanical strain for the modulation of the mechanical, electronic and optical properties of monolayer tungsten disulfide.

Monolayer transition metal dichalcogenides (TMDs) are the potential candidate materials in nanoelectronic and optoelectronic applications due to their unique physical and chemical properties. Although both defect and strain greatly alter the structural, physical and chemical properties of monolayer TMDs, the defective monolayer TMDs under applied strain have not been adequately studied. In this paper, the synergistic effects of sulfur vacancy defects and mechanical strain on the mechanical, electronic and optical properties of monolayer tungsten disulfide (WS2) have been systematically studied using first principles density functional theory. The results indicate that the sulfur vacancy formation energy increases linearly with increasing sulfur vacancy concentration under different strains. The strain energy and stress of monolayer WS2 with different sulfur vacancy concentrations increase with increasing applied strain in the strain range of -10% to 10%. The band gap of monolayer WS2 decreases with increasing sulfur vacancy concentration under different strains. Moreover, compared with unstrained conditions, 5% compressive strain increases the band gap at a larger vacancy concentration and the case is just opposite at a smaller vacancy concentration, while 5% tensile strain decreases the band gap. The band gap of monolayer WS2 with different sulfur vacancy concentrations firstly increases and then shrinks with increasing applied strain under compressive strain, whereas it decreases monotonically under tensile strain in the strain range of -10% to 10%. In the visible-light wavelength region, the out-of-plane absorption coefficient under different strains increases with increasing sulfur vacancy concentration. Furthermore, 5% compressive strain enhances the absorption coefficient and 5% tensile strain decreases the absorption coefficient. Hence, the synergistic effects of sulfur vacancy defects and mechanical strain in monolayer TMDs can open new avenues for their applications in nanoelectronic and optoelectronic devices.

Neural evolution structure generation: High entropy alloys.

We propose a neural evolution structure (NES) generation methodology combining artificial neural networks and evolutionary algorithms to generate high entropy alloy structures. Our inverse design approach is based on pair distribution functions and atomic properties and allows one to train a model on smaller unit cells and then generate a larger cell. With a speed-up factor of ∼1000 with respect to the special quasi-random structures (SQSs), the NESs dramatically reduce computational costs and time, making possible the generation of very large structures (over 40 000 atoms) in few hours. Additionally, unlike the SQSs, the same model can be used to generate multiple structures with the same fractional composition.

The outcome of fluticasone nasal spray on anosmia and triamcinolone oral paste in dysgeusia in COVID-19 patients.

BACKGROUND: To study the outcome of fluticasone nasal sprays in smell disorders and triamcinolone paste in taste dysfunction in a population of laboratory-confirmed SARS-CoV-2 patients as the test group. The control group will not be given any intervention and only monitoring of these symptoms will be done to compare the recovery time. METHODS: This prospective interventional study was conducted from June to Nov 2020 at, Datta Meghe University during the COVID-19 outbreak. The 120 enrolled patients were tested at days 1 and 5 after proven infection by RT-PCR test. RESULT: The mean age for all cases is 50.88 ± 15.93 years, whereas for the controls mean age is 51.2 ± 14.89. 2. Among cases 45 (75%) were males and 15 (25%) were females, among controls 43 (71.66%) were males and 17 (28.33%) were females. Among the case group, after the use of fluticasone spray in the nose and triamcinolone paste in the mouth there was a statistically significant improvement in recognizing all the odours and taste on day 5 compared to day 1. On comparing the smell and taste of cases and control group, either there is no improvement or worsening in smell or taste on day 5 in the control group. CONCLUSION: The use of fluticasone nasal spray and triamcinolone paste had immensely influenced the basic senses such as smell and taste. Our study showed that olfactory and taste function significantly improved in patients with COVID-19. For all anosmia and dysgeusia cases who received fluticasone nasal spray and triamcinolone medications the recovery of smell senses and the taste was within a week.

Electrolyte-Phobic Surface for the Next-Generation Nanostructured Battery Electrodes.

Nanostructured electrodes are among the most important candidates for high-capacity battery chemistry. However, the high surface area they possess causes serious issues. First, it would decrease the Coulombic efficiencies. Second, they have significant intakes of liquid electrolytes, which reduce the energy density and increase the battery cost. Third, solid-electrolyte interphase growth is accelerated, affecting the cycling stability. Therefore, the interphase chemistry regarding electrolyte contact is crucial, which was rarely studied. Here, we present a completely new strategy of limiting effective surface area by introducing an "electrolyte-phobic surface". Using this method, the electrolyte intake was limited. The initial Coulombic efficiencies were increased up to ∼88%, compared to ∼60% of the control. The electrolyte-phobic layer of Si particles is also compatible with the binder, stabilizing the electrode for long-term cycling. This study advances the understanding of interphase chemistry, and the introduction of the universal concept of electrolyte-phobicity benefits the next-generation battery designs.

Effect of He on the Order-Disorder Transition in Ni_{3}Al under Irradiation.

The order-disorder transition in Ni-Al alloys under irradiation represents an interplay between various reordering processes and disordering due to thermal spikes generated by incident high energy particles. Typically, ordering is enabled by diffusion of thermally generated vacancies, and can only take place at temperatures where they are mobile and in sufficiently high concentration. Here, in situ transmission electron micrographs reveal that the presence of He-usually considered to be a deleterious immiscible atom in this material-promotes reordering in Ni_{3}Al at temperatures where vacancies are not effective ordering agents. A rate-theory model is presented, that quantitatively explains this behavior, based on parameters extracted from atomistic simulations. These calculations show that the V_{2}He complex is an effective agent through its high stability and mobility. It is surmised that immiscible atoms may stabilize reordering agents in other materials undergoing driven processes, and preserve ordered phases at temperature where the driven processes would otherwise lead to disorder.