RESUMO
A major goal of synthetic biology is to reprogram cells to perform complex tasks. Here we show how a combination of in vitro and in vivo selection rapidly identifies a synthetic riboswitch that activates protein translation in response to the herbicide atrazine. We further demonstrate that this riboswitch can reprogram bacteria to migrate in the presence of atrazine. Finally, we show that incorporating a gene from an atrazine catabolic pathway allows these cells to seek and destroy atrazine.
Assuntos
Atrazina/metabolismo , Bactérias/genética , Bactérias/metabolismo , Herbicidas/metabolismo , Acetona/metabolismo , Atrazina/síntese química , Atrazina/farmacologia , Bactérias/efeitos dos fármacos , Fenômenos Fisiológicos Bacterianos , Sequência de Bases , Movimento Celular , Clonagem Molecular , DNA Bacteriano/genética , Etanolaminas/metabolismo , Regulação Bacteriana da Expressão Gênica , Herbicidas/síntese química , Cinética , Luz , Dados de Sequência Molecular , RNA Bacteriano/química , RNA Bacteriano/genética , RNA Bacteriano/metabolismo , beta-Galactosidase/metabolismoRESUMO
Group I introns catalyze the self-splicing reaction, and their derived ribozymes are frequently used as model systems for the study of RNA folding and catalysis, as well as for the development of non-native catalytic reactions. Utilizing a group I intron-derived ribozyme from Pneumocystis carinii, we previously reported a non-native reaction termed trans excision-splicing (TES). In this reaction, an internal segment of RNA is excised from an RNA substrate, resulting in the covalent reattachment of the flanking regions. TES proceeds through two consecutive phosphotransesterification reactions, which are similar to the reaction steps of self-splicing. One key difference is that TES utilizes the 3'-terminal guanosine of the ribozyme as the first-step nucleophile, whereas self-splicing utilizes an exogenous guanosine. To further aid in our understanding of ribozyme reactions, a kinetic framework for the first reaction step (substrate cleavage) was established. The results demonstrate that the substrate binds to the ribozyme at a rate expected for simple helix formation. In addition, the rate constant for the first step of the TES reaction is more than one order of magnitude lower than the analogous step in self-splicing. Results also suggest that a conformational change, likely similar to that in self-splicing, exists between the two reaction steps of TES. Finally, multiple turnover is curtailed because dissociation of the cleavage product is slower than the rate of chemistry.
Assuntos
Splicing de RNA , RNA Catalítico/química , Catálise , Éxons , Concentração de Íons de Hidrogênio , Íntrons , Cinética , Pneumocystis carinii/enzimologia , RNA Catalítico/metabolismoRESUMO
Synthetic riboswitches have emerged as useful tools for controlling gene expression to reprogram cellular behavior. However, advancing beyond proof-of-principle experiments requires the ability to quickly generate new synthetic riboswitches from RNA libraries. In this chapter, we provide a step-by-step overview of the process of obtaining synthetic riboswitches for use in Escherichia coli, starting from a randomized RNA library.
Assuntos
Riboswitch , Técnica de Seleção de Aptâmeros/métodos , Escherichia coli/genética , Escherichia coli/metabolismo , Regulação Bacteriana da Expressão Gênica , Biblioteca Gênica , RNA/genética , RNA/metabolismo , Técnica de Seleção de Aptâmeros/instrumentaçãoRESUMO
In the trans excision-splicing reaction, a Pneumocystis carinii group I intron-derived ribozyme binds an RNA substrate, excises a specific internal segment, and ligates the flanking regions back together. This reaction can occur both in vitro and in vivo. In this report, the first of the two reaction steps was analyzed to distinguish between two reaction mechanisms: ribozyme-mediated hydrolysis and nucleotide-dependent intramolecular transesterification. We found that the 3'-terminal nucleotide of the ribozyme is the first-reaction step nucleophile. In addition, the 3'-half of the RNA substrate becomes covalently attached to the 3'-terminal nucleotide of the ribozyme during the reaction, both in vitro and in vivo. Results also show that the identity of the 3'-terminal nucleotide influences the rate of the intramolecular transesterification reaction, with guanosine being more effective than adenosine. Finally, expected products of the hydrolysis mechanism do not form during the reaction. These results are consistent with only the intramolecular transesterification mechanism. Unexpectedly, we also found that ribozyme constructs become truncated in vivo, probably through intramolecular 3'-hydrolysis (self-activation), to create functional 3'-terminal nucleotides.
Assuntos
Guanosina/metabolismo , Íntrons/genética , Pneumocystis carinii/enzimologia , Pneumocystis carinii/genética , RNA Catalítico/genética , RNA Catalítico/metabolismo , Trans-Splicing/genética , Adenosina/metabolismo , Sequência de Bases , Hidrólise , Conformação de Ácido Nucleico , RNA Catalítico/químicaRESUMO
Trans excision-splicing (TES) ribozymes, derived from a Pneumocystis carinii group I intron, can catalyze the excision of targeted sequences from within RNAs. In this report, the sequence requirements of the splice sites are analyzed. These conserved sequences include a u-G wobble pair at the 5' splice site and a guanosine in the omega position at the 3' splice site (in the substrate). We report that 7 out of 16 base pair combinations at the 5' splice site produce appreciable TES product. This promiscuity is in contrast to results reported for analogous self-splicing reactions using a Tetrahymena ribozyme. At long reaction times TES products dissociate and rebind free ribozyme, at which point product degradation occurs via the 5' cleavage reaction. Unexpectedly, only in cases where Watson-Crick base pairs form at the 5'splice site do we see degradation of TES products at cryptic sites, suggesting that non-Watson-Crick base pairs at the 5' splice site are acting in concert with other factors to precisely determine the binding register of TES reaction substrates within the ribozyme. Moreover, cryptic site degradation does not occur with the corresponding reaction substrates, which additionally contain omegaG, suggesting that omegaG can play a similar role. We report that omegaG cannot be replaced by any other base, so TES substrates require a guanosine as the last (or only) base to be excised. Additionally, we demonstrate that P9.0 and P10 are expendable for TES reactions, suggesting that omegaG is sufficient as a 3' molecular recognition element.
Assuntos
Splicing de RNA , RNA Catalítico/metabolismo , Pareamento de Bases , Sequência de Bases , Primers do DNA , RNA Catalítico/química , Especificidade por SubstratoRESUMO
A group I intron-derived ribozyme from Pneumocystis carinii has been previously shown to bind an exogenous RNA substrate, splice out an internal segment, and then ligate the two ends back together (the trans excision-splicing reaction). We demonstrate that this same ribozyme can perform a trans insertion-splicing (TIS) reaction, where the ribozyme binds two exogenous RNA substrates and inserts one directly into the other. Reactions were optimized for both yield and rate, with optimum reactions carried out in 10 mM MgCl(2) for 2 h. Reaction products are stable, with no visible loss at extended times. The ribozyme recognizes the two substrates primarily through base pairing and requires an omegaG on the ribozyme and an omegaG on the sequence being inserted. We give evidence that the reaction mechanism is not the reverse of the trans excision-splicing reaction, but is composed of three steps, with intermediates attached to the ribozyme. Surprisingly, the internal guide sequence of the ribozyme is utilized to sequentially bind both substrates, forming independent P1 helices. This is an indication that ribozymes with essentially the native intron sequence can catalyze reactions significantly more dynamic and complex than self-splicing. The implications of group I intron-derived ribozymes being able to catalyze this unique reaction, and via this mechanism, are discussed.
Assuntos
Marcação de Genes , Splicing de RNA , RNA Catalítico/genética , RNA Catalítico/metabolismo , RNA Fúngico/metabolismo , Catálise , Guanina/metabolismo , Íntrons , Pneumocystis carinii/genética , Pneumocystis carinii/metabolismo , Sítios de Splice de RNA , RNA Fúngico/genética , Especificidade por Substrato/genéticaRESUMO
We previously reported that a group I intron-derived ribozyme can catalyze the excision of targeted sequences from within RNAs in vitro and that dissociation of the bridge-3' exon intermediate between the two reaction steps is a significant contributing factor to low product yields. We now analyze the effects of increasing the length, and thus the strength, of helices P9.0 and P10, which occur between the ribozyme and the bridge-3' exon region of the substrate, on this trans excision-splicing reaction. Using substrates where lengthy targeted regions are excised, these modifications can significantly increase product yields, specifically by enhancing the second reaction step. A threshold for product formation is obtained, however, at around five base pairs for P10 and eight base pairs for P9.0. Nevertheless, elongating P9.0 appears to be the more effective strategy, as both substrate binding and the rate of the second reaction step increase. In addition, P10 is required when P9.0 is not elongated. Also, a strong P9.0 helix cannot replace a weaker P10 helix, indicating that P9.0 and P10 play somewhat distinct roles in the reaction. We also show that second-step inhibition stems from the formation of an extended P1 helix (P1ex), consisting of as little as a single Watson-Crick base pair, as well as the mere presence of substrate nucleosides immediately downstream from P10. Both of these inhibitory components can be overcome by utilizing P9.0 and P10 elongated ribozymes. This work sets forth an initial framework for rationally designing more effective trans excision-splicing ribozymes.