Assessing the quality of constructed technosols enabled holistic monitoring of ecological restoration.

The soil quality index (SQI) serves as a general ecological restoration indicator, however, statistics approaches that accurately assess the minimum data set (MDS) for SQI remain susceptible. The present study aims to evaluate the short-term reclamation results at the Ferro-Carvão stream and propose a system for ecological restoration monitoring, by selecting influential attributes and indexing soil quality. We hypothesized that the reclamation activities at the Ferro-Carvão stream, referred to as the "Marco zero" (MZ) area, can bring its soil quality to levels comparable to those of the native area. We collected soil samples at 0-20 and 20-40 cm depths from transects of MZ and reference sites (R1 and R2). Principal component analysis showed the MDS for each soil depth. Permutational analysis of variance, in conjunction with Nonmetric Multidimensional Scaling, exposed relationships between transects of areas. An additive non-linear factorial algorithm allowed SQI assessment. The results indicated a similar soil quality between transects of areas at 0-20 cm depth, whereas a dissimilarity at 20-40 cm. To sum up, reclamation activities allowed MZ-constructed Technosol to present a soil quality similar to native areas. The soil quality assessment at both depths offered insights into reclamation activities' immediate and long-term impacts on the Ferro-Carvão stream. This robust framework effectively monitors ecological restoration progress and guides future efforts in post-mining and post-dam collapse sites.

Effects of crown contour on artificial biofilm removal efficacy with interdental cleaning aids: An in vitro study.

OBJECTIVES: To evaluate the efficacy of various interdental cleaning aids for artificial biofilm removal on different implant-supported crown designs. METHODS: Mandibular models with missing first molar were fabricated and installed with single implant analogs and loaded with crowns of different designs (concave, straight, and convex). Artificial biofilm was made with occlusion spray. Thirty volunteers (periodontists, dental hygienists, and laypersons) were asked to clean the interproximal areas. The crowns were unscrewed and photographed in a standardized setting. The outcome was measured by the cleaning ratio which represents the cleaned surfaces in relation to the area of the tested surface. RESULTS: A significant difference in favor of concave crown (p < .001) on the basal surface was cleaned by all tools, except the water flosser. There was evidence of an overall effect of "cleaning tool," "surface," and "crown design" (p < .0001) except for the "participant" factor. The mean cleaning ratio for each cleaning tool and overall combined surfaces were (in%): dental floss: 43.02 ± 23.93, superfloss: 42.51 ± 25.92, electric interspace brush: 36.21 ± 18.78, interdental brush: 29.10 ± 15.95, and electric water flosser: 9.72 ± 8.14. Dental floss and superfloss were significantly better (p < .05) than other tools in removing plaque. CONCLUSIONS: Concave crown contour had the greatest artificial biofilm removal, followed by straight and convex crowns at the basal surface. Dental floss and superfloss were the most effective interdental cleaning devices for artificial biofilm removal. None of the tested cleaning devices were able to completely remove the artificial biofilm from the interproximal/basal surfaces.

Glacier fluctuations and a proglacial evolution in King George Bay (King George Island), Antarctica, since 1980 decade.

This study aims to investigate the glacier shrinkage and recent proglacial environment in King George Bay, Antarctica, since 1988 in response to climate change. Remote sensing data (SPOT, Sentinel, Landsat and Planet Scope images) were applied to glacial landforms and ice-marginal fluctuations mapping. Annual mean near-surface air temperature reanalysis solutions from ERA-Interim were analyzed. Moraines and glaciofluvial landforms were identified. The Ana Northern Glacier has the highest retreat value (3.64 km) (and area loss of 31%) in response to higher depth in frontal ice-margin and reveal ocean-glacier linkages. The Ana South Glacier changed from a tidewater glacier to land-terminating after 1995, and had an outline minimum elevation variation of 89 meters, a shrinkage of 0.63 km, and a new proglacial subaerial sector. The Ana South Glacier foreland had recessional moraines (probably formed between 1995 and 2022), lagoons, and lakes. There are many flutings in low-relief environments. The 1980-1989, 1990-1999, 2000-2009, 2010-2019 anomaly plots concerning to the 1980-2019 average for atmospheric temperature, are shown to be a driver of the local glacial trends.

Ornithogenesis and soil-landscape interplays at northern Harmony Point, Nelson Island, Maritime Antarctica.

Understanding the influence of soil-forming factors and processes in ornithogenic soils is important to predict impacts of climate change on Antarctic ecosystems. Herein, we analyzed the soil-landscape interplays and development of ornithogenic soils at Harmony Point (HP), Nelson Island. We collected, described, and classified 24 soil profiles, combined with vegetation and landforms descriptions. Geoprocessing techniques were employed for mapping. Soil physical, chemical, geochemical, and mineralogical analyses were applied. Patterned ground, "Ornithogenic"/Typic Gelorthent, and moss carpets were the dominant landform, soil and vegetation classes, respectively. Soils from rocky outcrops were more structured, acidic, with higher organic carbon, organometallic complexes, and secondary phosphate minerals, due to former bird influence. Soils from cryoplanated platforms presented higher water pH, base saturation, clay content, and secondary silicate minerals. Soils from marine terraces presented high exchangeable bases, phosphorous, and amorphous phosphate minerals. Soil chemical weathering is enhanced by ornithogenesis and widespread in HP. Besides ornithogenesis, organic matter accumulation, cryoturbation, and cryoclastic processes are also important to pedogenesis of ornithogenic soils. The soils of the cryoplanated platforms exhibited a gradient of pedogenetic development corresponding to increasing biota influence and distance from glacier. In contrast, soils of rocky outcrops were more developed even close to the glacier, due to ornithogenesis.

Soils under seal carcasses with varying degrees of decomposition: oasis of nutrients and vegetation in Antarctica.

Areas of high concentration of seal carcasses have been observed in localized areas of James Ross Island, Antarctica. Such carcasses show an unusual vegetation development, in a semi-arid area with bare soils under intense winds, high salinity and sandy texture. We investigated carcasses of seals around a lake in James Ross Island, with four different stages of decomposition, with three replicates: Seal (S01), with recently mummified carcasses; S02, with partially degraded carcasses; S03, with broken carcasses with partially degraded exposed bones, and S04, with completely broken, scattered skeletons. The vegetation showed a maximum degree of development in carcasses at stages S02 and S03, with the environment between the skin and the skeleton as the preferred place for vegetation establishment. The chemical alteration was greater with increasing carcass decomposition but reduced with the spreading and final decomposition of the bones, with anomalous values observed only in the vicinity of the carcasses. It is concluded that the presence of carcasses of seals, concentrated in wet places, even in a semi-desert climate, represent important oases of nutrients, with a combination of physical and chemical effects throughout the decomposition process that favor plant establishment and succession.

Digitally-Guided Lateral Sinus Floor Elevation with Simultaneous Implant Placement: Three Case Reports with Technical Considerations.

INTRODUCTION: A sinus floor elevation via lateral window (LSFE) is one of the most widely used bone augmentation procedures for implant therapy in the posterior area of the maxilla.  Locating and preparing a correct opening window on the lateral sinus wall is a key step of this procedure. Conventionally, the surgeon design and locate the window after the flap is reflected based upon the information obtained from cone-beam computed tomography (CBCT) images or other diagnostic aids. Nevertheless, in spite of the advancements in CBCT imaging, clinicians may still experience hardship in situating and procuring meticulous access to the maxillary sinus by using CBCT alone. Therefore, in cases requiring a LSFE simultaneous to implant placement, a maxillary sinus surgical guide (MSSG) has been tested and reported to be the amiable method to be utilized as a conjunct, to prevent unpredictable consequences according to its application in implying both the direction for the implant and the location of the lateral window. CASE SERIES: This article presents 3 clinical cases with a fully digital approach to guide the opening of the lateral wall of the maxillary sinus, as well as the simultaneous placement of a single implant in an ideal 3D position. Based on the CBCT images and intraoral scan, a surgical guide was fabricated base on 3D software. During the surgery, this teeth-supported template can be placed intraorally, guiding sinus window opening preparation. CONCLUSION: This technique makes the sinus window opening procedure simple and predictable, reduces surgical time as well as the risk of complications, and allows the placement of the implant in the ideal 3D position.

Digitally Guided Lateral Sinus Floor Elevation With Simultaneous Implant Placement: 3 Case Reports With Technical Considerations.

A sinus floor elevation via lateral window (LSFE) is one of the most widely used bone augmentation procedures for implant therapy in the posterior area of the maxilla. Locating and preparing a correct opening window on the lateral sinus wall is a key step of this procedure. Conventionally, the surgeon designs and locates the window after the flap is reflected based on the information obtained from cone-beam computed tomography (CBCT) images or other diagnostic aids. Nevertheless, in spite of the advancements in CBCT imaging, clinicians may still experience hardships in situating and procuring meticulous access to the maxillary sinus by using CBCT alone. Therefore, in cases requiring an LSFE simultaneous to implant placement, a maxillary sinus surgical guide has been tested and reported to be the amiable method to be utilized as a conjunct to prevent unpredictable consequences according to its application in implying both the direction for the implant and the location of the lateral window. This article presents 3 clinical cases with a fully digital approach to guide the opening of the lateral wall of the maxillary sinus as well as the simultaneous placement of a single implant in an ideal 3D position. Based on the CBCT images and intraoral scan, a surgical guide was fabricated based on 3D software. During surgery, this teeth-supported template can be placed intraorally, guiding sinus window opening preparation. This technique makes the sinus window opening procedure simple and predictable, reduces surgical time and the risk of complications, and allows the placement of the implant in the ideal 3D position.

Acid sulfate soils from Antarctica: genesis and properties along a climatic gradient.

Sulfurization is a pedogenic process that involves pyrite oxidation and strong soil acidification, accounting for the formation of acid sulfate soils. In Antarctica, acid sulfate soils are related to specific parent materials, such as sulfide-bearing andesites in Maritime Antarctica and pyritized sedimentary rocks in James Ross Archipelago. The hypothesis is that the acid sulfate soils of these regions vary according with a climate gradient. The reviewing of current data showed that the acid sulfate soils of warmer and wetter Maritime Antarctica have a greater weathering degree, higher acidity, leaching, phosphorus adsorption capacity, structural development, and well-crystallized iron oxides and kaolinite formation. On the other hand, the sulfurization at the drier region of James Ross Archipelago is counterbalanced by the semiaridity, resulting in lower acidity and higher base contents combined with little morphological and mineralogical evolution besides presence of weatherable minerals in the clay fraction. The sulfurization process interplays with other pedogenic processes, such as the phosphatization in Maritime Antarctica and salinization in James Ross Archipelago. Higher temperatures and soil moisture enhance the pedogenesis, showing that even the Antarctic sulfate soils, which originated from specific parent materials, have their development and characteristics controlled by a clear climatic gradient.

The Impact of Surgical Guide Fixation and Implant Location on Accuracy of Static Computer-Assisted Implant Surgery.

PURPOSE: To evaluate the accuracy of static computer-assisted implant surgery (sCAIS) for tooth-supported free-end dental implantation with the aid/and without the aid of fixation pins to secure the surgical template through comparison between planned, 3D printed guide position and placement implant position. MATERIALS AND METHODS: Thirty-two duplicated maxillary resin models were used in the present in vitro study. Digital planning was performed and fabrication of a surgical template that allowed implant placement on the distal extension edentulous site of the model (maxillary left side). A first optical scan was performed after fitting the surgical template on the model to assess the deviation at the surgical guide level. After placing implants in the model using the surgical guide, scan bodies were attached to the implants, and a second scan was performed to record the position of placed implants. The digital representations were later superimposed to the pre-operative scan and measurements of implant deviations were performed. Global (coronal and apical), horizontal (coronal and apical), depth and angular deviations were recorded between planned implant position, guide position, and placement implant position. Three-way ANOVA was used to compare implant location (#13, 14, and 15), fixation pin (with or without pin), and guide comparison (planned, guided, and placement). RESULTS: Final implant placement based on the digital plan and based on the 3D printed guide were very similar except for depth deviation. Use of fixation pin had a statistically significant effect on the depth and angular deviation. Overall, without fixation pins and based on guide versus placement, mean global coronal (0.88 ± 0.36 mm), horizontal coronal (0.55 ± 0.32 mm), and apical (1.44 ± 0.75 mm), and angular deviations (4.28 ± 2.01°) were similar to deviations with fixation pins: mean global coronal (0.88 ± 0.36 mm); horizontal coronal (0.67 ± 0.22 mm) and apical (1.60 ± 0.69 mm); and angular deviations (4.53 ± 2.04°). Horizontal apical without pins (1.63 ± 0.69 mm) and with fixation pins (1.72 ± 0.70 mm) was statistically significant (p = 0.044). Depth deviation without pins (-0.5 ± 0.5 mm) and with fixation pins (-0.16 ± 0.62 mm) was also statistically significant (p = 0.005). Further analysis demonstrated that the final sleeve position on the 3D printed guide was on average 0.5 mm more coronal than the digital plan. CONCLUSIONS: The use of surgical guides with or without fixation pins can provide clinically acceptable outcomes in terms of accuracy in implant position. There was a statistically significant difference in the accuracy of implant position when utilizing fixation pins only for horizontal apical and depth deviation. Additionally, a statistically significant difference between the planned and the 3D printed surgical guide when considering the sleeve position was detected.

Hydrophilic titanium surface modulates early stages of osseointegration in osteoporosis.

OBJECTIVE: Using a mouse osteoporotic model, this study aimed to determine the influence of hydrophilic titanium surfaces on gene expression and bone formation during the osseointegration process. BACKGROUND: Based on the previous evidence, it is plausible to assume that osteoporotic bone has a different potential of bone healing. Therefore, implant surface modification study that aims at enhancing bone formation to further improve short- and long-term clinical outcomes in osteoporosis is necessary. MATERIAL AND METHODS: Fifty female, 3-month-old mice were included in this study. Osteoporosis was induced by ovariectomy (OVX, test group) in 25 mice. The further 25 mice had ovaries exposed but not removed (SHAM, control group). Seven weeks following the ovariectomy procedures, one customized implant (0.7 × 8 mm) of each surface was placed in each femur for both groups. Implants had either a hydrophobic surface (SAE) or a hydrophilic treatment surface (SAE-HD). Calcium (Ca) and phosphorus (P) content was measured by energy-dispersive X-ray spectroscopy (EDS) after 7 days. The femurs were analyzed for bone-to-implant contact (BIC) and bone volume fraction (BV) by nano-computed tomography (nano-CT) after 14 and 28 days. Same specimens were further submitted to histological analysis. Additionally, after 3 and 7 days, implants were removed and cells were collected around the implant to access gene expression profile of key osteogenic (Runx2, Alp, Sp7, Bsp, Sost, Ocn) and inflammatory genes (IL-1ß, IL-10, Tnf-α, and Nos2) by qRT-PCR assay. Statistical analysis was performed by ANOVA and paired t test with significance at P < .05. RESULTS: The amount of Ca and P deposited on the surface due to the mineralization process was higher for SAE-HD compared to SAE on the intra-group analysis. Nano-CT and histology revealed more BV and BIC for SAE-HD in SHAM and OVX groups compared to SAE. Analysis in OVX group showed that most genes (ie, ALP, Runx2) involved in the bone morphogenetic protein (BMP) signaling were significantly activated in the hydrophilic treatment. CONCLUSION: Both surfaces were able to modulate bone responses toward osteoblast differentiation. SAE-HD presented a faster response in terms of bone formation and osteogenic gene expression compared to SAE. Hydrophilic surface in situations of osteoporosis seems to provide additional benefits in the early stages of osseointegration.

Volumetric changes at implant sites: A systematic appraisal of traditional methods and optical scanning-based digital technologies.

AIM: To evaluate techniques for assessing soft tissue alterations at implant sites and compare the traditionally utilized methods to the newer three-dimensional technologies emerging in the literature. MATERIALS AND METHODS: A comprehensive search was performed to identify interventional studies reporting on volumetric changes at implant sites following different treatments. RESULTS: Seventy-five articles were included the following: 30 used transgingival piercing alone, one utilized calliper, six with ultrasonography, six on cone-beam computed tomography, and 32 utilized optical scanning and digital technologies. Optical scanning-based digital technologies were the only approach that provided 'volumetric changes,' reported as volumetric variation in mm3 , or the mean distance between the surfaces/mean thickness of the reconstructed volume. High variability in the digital analysis and definition of the region of interest was observed. All the other methods reported volume variation as linear dimensional changes at different apico-coronal levels. No studies compared volumetric changes with different approaches. CONCLUSIONS: Despite the emergence of optical scanning-based digital technologies for evaluating volumetric changes, a high degree of variation exists in the executed workflow, which renders the comparison of study results not feasible. Establishment of universal guidelines could allow for volumetric comparisons among different studies and treatments.

Comprehensive peri-implant tissue evaluation with ultrasonography and cone-beam computed tomography: A pilot study.

OBJECTIVES: The aim of the present study was to explore the feasibility of ultrasonography (US) for clinical imaging of peri-implant tissues. MATERIAL AND METHODS: Patients with ≥1 implant, a cone-beam computed tomography (CBCT) scan, an US scan, and clinical photographs taken during the surgery were included. The crestal bone thickness (CBT) and facial bone level (FBL) were measured on both US and CBCT modalities, and direct FBL measurements were also made on clinical images. US measurements were compared with CBCT and direct readings. RESULTS: A total of eight implants from four patients were included. For FBL measurements, US and direct (r2 = 0.95) as well as US and CBCT (r2 = 0.85) were highly correlated, whereas CBCT correlated satisfactorily with the direct reading (r2 = 0.75). In one implant without facial bone, CBCT was not able to measure CBT and FBL accurately. The estimated bias for CBT readings was 0.17 ± 0.23 mm (p = .10) between US and CBCT. US blood flow imaging was successfully recorded and showed a wide dynamic range among patients with different degrees of clinical inflammation. CONCLUSION: US is a feasible method to evaluate peri-implant facial crestal bone dimensions. Additional US features, for example, functional blood flow imaging, may be useful to estimate the extent and severity of inflammation.

Intraoral scanning reduces procedure time and improves patient comfort in fixed prosthodontics and implant dentistry: a systematic review.

OBJECTIVES: The primary aim of this systematic review was to evaluate whether intraoral scanning (IOS) is able to reduce working time and improve patient-reported outcome measures (PROMs) compared to conventional impression (CI) techniques, taking into account the size of the scanned area. The secondary aim was to verify the effectiveness of IOS procedures based on available prosthodontic outcomes. MATERIALS AND METHODS: Electronic and manual literature searches were performed to collect evidence concerning the outcomes of IOS and CI performed during the treatment of partially and complete edentulous patients for tooth- or implant-supported restorations. Qualitative analysis was conducted to evaluate the time efficiency and PROMs produced by the two different techniques. Clinical prosthodontic outcomes were analyzed among the included studies when available. RESULTS: Seventeen studies (9 randomized controlled trials and 8 prospective clinical studies) were selected for qualitative synthesis. The 17 included studies provided data from 430 IOS and 370 CI performed in 437 patients. A total of 7 different IOS systems and their various updated versions were used for digital impressions. The results demonstrated that IOS was overall faster than CI independent of whether quadrant or complete-arch scanning was utilized, regardless of the nature of the restoration (tooth or implant supported). IOS was generally preferred over CI regardless of the size of the scanned area and nature of the restoration (tooth- or implant-supported). Similar prosthodontic outcomes were reported for workflows implementing CI and IOS. CONCLUSIONS: Within the limitations of this systematic review, IOS is faster than CI, independent of whether a quadrant or complete arch scan is conducted. IOS can improve the patient experience measured by overall preference and comfort and is able to provide reliable prosthodontic outcomes. CLINICAL RELEVANCE: Reduced procedure working time associated with the use of IOS can improve clinical efficiency and the patient experience during impression procedures. Patient-reported outcome measures (PROMs) are an essential component of evidence-based dental practice as they allow the evaluation of therapeutic modalities from the perspective of the patient. IOS is generally preferred by patients over conventional impressions.

A fully digital approach for implant fixed complete dentures: A case report.

INTRODUCTIONS: Intraoral scanner has been widely used for implant impression in partially edentulous cases; however, its accuracy in the impression of full-arch implant is still questionable. CLINICAL REPORT: This clinical report presents a technique to check the accuracy of intraoral scanning for complete-arch implant restorations using an implant index cast (The Glossary of Prosthodontic Terms 9th Edition) and a three-dimensional printed cast. A clinical case of immediate loading on a maxillary edentulous patient illustrates the application of an implant index cast in implant fixed complete dentures (IFCDs). DISCUSSION: The implant index cast was fabricated based on the immediate interim prosthesis and provides effective control of the fit of scanned files and printed models. Therefore, this approach allows a more predictable and accurate fit of the final prosthesis. CLINICAL SIGNIFICANCE: In this article, we present a technique to check the accuracy of the final prosthesis without the need for a conventional impression and final cast in a digital workflow. This proposed approach is demonstrated through a case report of a maxillary edentulous patient restored with immediate loaded IFCDs.

Denture scanning technique for computer-guided implant-supported restoration treatment of edentulous patients.

The traditional protocol for guided surgery in a completely edentulous patient is time-consuming, requiring the fabrication of a radiographic guide and a dual cone beam computed tomography (CBCT) scan. Using intraoral scanners to scan the edentulous ridge and the existing denture has been advocated to simplify the process. This technique offers a versatile, precise, and predictable method for the digital planning workflow in edentulous patients for either a fixed or removable restoration. In addition, this approach can help improve the quality of the guide produced by reducing CBCT artifacts associated with the existing denture, as well as capture the soft-tissue contour to further improve the fit of the surgical guide.

Influence of keratinized mucosa on the surgical therapeutical outcomes of peri-implantitis.

AIM: To assess the impact of keratinized mucosa (KM) width around dental implants on surgical therapeutic outcomes when treating peri-implantitis. MATERIAL AND METHODS: Surgically treated peri-implantitis implants were divided into two groups (KM width < 2 mm and ≥2 mm). Retrospective data were obtained after implant placement (T0) and the day of peri-implantitis surgical treatment (T1). Patients were later recruited (≥1 year after T1) for clinical and radiographic examination (T2). Outcomes were analysed using generalized estimating equation (GEE) models. RESULTS: A total of 40 patients (68 implants) (average follow-up: 52.4 ± 30.5 months) were included in this study. From T0 to T1, no differences were found between KM groups in terms of peri-implant probing depths (PPD) and bleeding on probing (BOP). However, sites with <2 mm KM exhibited significantly higher suppuration (SUP) and lower marginal bone level (MBL) (p > .01). Between T1 and T2, no major differences were noted on PPD reduction, BOP and MBL changes between the two groups. GEE modelling demonstrated that MBL severity prior to surgical therapy was a better predictor for implant survival than KM width. CONCLUSION: Surgical outcome in treating peri-implantitis was influenced by the severity of bone loss present at the time of treatment and not by the presence of KM at the time of treatment.

Effect of different implant placement depths on crestal bone levels and soft tissue behavior: A 5-year randomized clinical trial.

OBJECTIVES: This randomized clinical trial analyzed the long-term (5-year) crestal bone changes and soft tissue dimensions surrounding implants with an internal tapered connection placed in the anterior mandibular region at different depths (equi- and subcrestal). MATERIALS AND METHODS: Eleven edentulous patients were randomly divided in a split-mouth design: 28 equicrestal implants (G1) and 27 subcrestal (1-3 mm) implants (G2). Five implants were placed per patient. All implants were immediately loaded. Standardized intraoral radiographs were used to evaluate crestal bone (CB) changes. Patients were assessed immediately, 4, 8, and 60 months after implant placement. The correlation between vertical mucosal thickness (VMT) and soft tissue recession was analyzed. Sub-group analysis was also performed to evaluate the correlation between VMT and CB loss. Rank-based ANOVA was used for comparison between groups (α = .05). RESULTS: Fifty-five implants (G1 = 28 and G2 = 27) were assessed. Implant and prosthetic survival rate were 100%. Subcrestal positioning resulted in less CB loss (-0.80 mm) when compared to equicrestal position (-0.99 mm), although the difference was not statistically significant (p > .05). Significant CB loss was found within the G1 and G2 groups at two different measurement times (T4 and T60) (p < .05). Implant placement depths and VMT had no effect on soft tissue recession (p > .05). CONCLUSIONS: There was no statistically significant difference in CB changes between subcrestal and equicrestal implant positioning; however, subcrestal position resulted in higher bone levels. Neither mucosal recession nor vertical mucosa thickness was influenced by different implant placement depths.

Using Digital Technique to Obtain the Ideal Soft Tissue Contour in Immediate Implants With Provisionalization.

This paper presents a newly developed digital technique to make a provisional crown that mimics the natural tooth during immediate implant placement. Basically, a digital technique results in a precise transfer tooth emergence profile for provisional restoration in immediate implant placement so that an ideal periimplant soft tissue contour can be maintained. The architecture of extraction socket is obtained digitally before the surgery that allows for implant planning by position of the implant as well as the emergence profile of provisional restoration. The introduction of this approach provides a versatile, precise, and predictable procedure leading to better esthetic outcomes.

Resonance Frequency Analysis of Dental Implants With 2 Types of Surface Treatment Submitted to Immediate Loading: A Prospective Clinical Study.

BACKGROUND: Characteristics of the implant surface may benefit osseointegration, and the knowledge of this process in diverse clinical situations may play a role in implant dentistry practice. PURPOSE: The aim of the present study was to compare the stability of dental implants with different types of surface treatment. MATERIALS AND METHODS: Fifty-five implants were placed in the mandibles of 11 fully edentulous patients. Group 1 (G1) consisted of 27 implants with a hydrophilic surface. Group 2 (G2) consisted of 28 implants (double sandblasting and acid etching). Implants were distributed randomly; equal surfaces were not placed contiguously. Measurements were taken after surgery (baseline) and 10, 30, 60, and 90 days, 4 and 8 months after surgery. Resonance frequency analysis (RFA) was used for determining the stability. RESULTS: No statistically significant differences were found. The largest difference in implant stability quotient (ISQ) between groups occurred at the first evaluation (ISQ ≈ 69.8 in G1 and ≈ 68.4 in G2). Reductions in stability were more accentuated in the first month, returning to values similar to baseline in the subsequent months, with peak stability reached at 8 months (ISQ ≈ 69.8 in G1 and ≈ 69.8 in G2). CONCLUSION: No statistically significant differences were found in the stability of the implants placed in edentulous mandibular arch, submitted to immediate loading analyzed using RFA.

Effect of different implant placement depths on crestal bone levels and soft tissue behavior: a randomized clinical trial.

OBJECTIVES: This randomized clinical trial analyzed crestal bone changes and soft tissue dimensions surrounding implants with an internal tapered connection placed in the mandible anterior region at different depths (equicrestal and subcrestal). MATERIALS AND METHODS: Eleven edentulous patients (five implants per patient) were randomly divided in a split-mouth design: G1, 28 equicrestal implants; and G2, 27 subcrestal implants. All implants were immediately loaded. Correlation between keratinized tissue width (KTW) and vertical mucosa thickness (MT) with soft tissue recession was analyzed. Intraoral radiographs were used to evaluate crestal bone changes. Patients were assessed immediately, 4-, and 8-months after implant placement. Rank-based ANOVA-type statistical test was used for comparison between groups (α = 0.05). RESULTS: Fifty-five implants (G1 = 28 and G2 = 27) were assessed in 11 patients. Implant survival rate was 100% for both groups. Both tested implant placement depths presented similar crestal bone loss (P > 0.05). Significant crestal bone loss for each group was found in the different measurement times (T4 and T8) (P < 0.05). Implant placement depths, KTW, and vertical MT had no effect on soft tissue recession (P > 0.05). CONCLUSIONS: Different implant placement depths do not influence crestal bone changes. Soft tissue behavior is not influenced by different implant placement depths or by the amount of keratinized tissue.