RESUMO
Vapor-liquid-solid nanowire growth below the bulk metal-semiconductor eutectic temperature is known for several systems; however, the fundamental processes that govern this behavior are poorly understood. Here, we show that hydrogen atoms adsorbed on the Ge nanowire sidewall enable AuGe catalyst supercooling and control Au transport. Our approach combines in situ infrared spectroscopy to directly and quantitatively determine hydrogen atom coverage with a "regrowth" step that allows catalyst phase to be determined with ex situ electron microscopy. Maintenance of a supercooled catalyst with only hydrogen radical delivery confirms the centrality of sidewall chemistry. This work underscores the importance of the nanowire sidewall and its chemistry on catalyst state, identifies new methods to regulate catalyst composition, and provides synthetic strategies for subeutectic growth in other nanowire systems.
RESUMO
Surface adsorbates are well-established choreographers of material synthesis, but the presence and impact of these short-lived species on semiconductor nanowire growth are largely unknown. Here, we use infrared spectroscopy to directly observe surface adsorbates, hydrogen atoms and methyl groups, chemisorbed to the nanowire sidewall and show they are essential for the stable growth of Ge nanowires via the vapor-liquid-solid mechanism. We quantitatively determine the surface coverage of hydrogen atoms during nanowire growth by comparing ν(Ge-H) absorption bands from operando measurements (i.e., during growth) to those after saturating the nanowire sidewall with hydrogen atoms. This method provides sub-monolayer chemical information at relevant reaction conditions while accounting for the heterogeneity of sidewall surface sites and their evolution during elongation. Our findings demonstrate that changes to surface bonding are critical to understand Ge nanowire synthesis and provide new guidelines for rationally selecting catalysts, forming heterostructures, and controlling dopant profiles.
RESUMO
We observe and systematically tune an intense mid-infrared absorption mode that results from phosphorus doping in silicon nanowires synthesized via the vapor-liquid-solid technique. The angle- and shape-dependence of this spectral feature, as determined via in-situ transmission infrared spectroscopy, supports its assignment as a longitudinal localized surface plasmon resonance (LSPR). Modulation of resonant frequency (740-1620 cm(-1)) is accomplished by varying nanowire length (135-1160 nm). The observed frequency shift is consistent with Mie-Gans theory, which indicates electrically active dopant concentrations between 10(19) and 10(20) cm(-3). Our findings suggest new opportunities to confine light in this ubiquitous semiconductor and engineer the optical properties of nontraditional plasmonic materials.
RESUMO
Van der Waals layered materials, such as transition metal dichalcogenides (TMDs), are an exciting class of materials with weak interlayer bonding, which enables one to create so-called van der Waals heterostructures (vdWH). One promising attribute of vdWH is the ability to rotate the layers at arbitrary azimuthal angles relative to one another. Recent work has shown that control of the twist angle between layers can have a dramatic effect on TMD vdWH properties, but the twist angle has been treated solely through the use of rigid-lattice moiré patterns. No atomic reconstruction, that is, any rearrangement of atoms within the individual layers, has been reported experimentally to date. Here, we demonstrate that vdWH of MoSe2/WSe2 and MoS2/WS2 at twist angles ≤1° undergo significant atomic level reconstruction leading to discrete commensurate domains divided by narrow domain walls, rather than a smoothly varying rigid-lattice moiré pattern as has been assumed in prior experimental work. Using conductive atomic force microscopy (CAFM), we show that TMD vdWH at small twist angles exhibit large domains of constant conductivity. The domains in samples with R-type stacking are triangular, whereas the domains in samples with H-type stacking are hexagonal. Transmission electron microscopy provides additional evidence of atomic reconstruction in MoSe2/WSe2 structures and demonstrates the transition between a rigid-lattice moiré pattern for large angles and atomic reconstruction for small angles. We use density functional theory to calculate the band structures of the commensurate reconstructed domains and find that the modulation of the relative electronic band edges is consistent with the CAFM results and photoluminescence spectra. The presence of atomic reconstruction in TMD heterostructures and the observed impact on nanometer-scale electronic properties provide fundamental insight into the behavior of this important class of heterostructures.
RESUMO
We report the synthesis of high-quality single monolayer MoS2 samples using a novel technique that utilizes direct liquid injection (DLI) for the delivery of precursors. The DLI system vaporizes a liquid consisting of a selected precursor dissolved in a solvent into small, micron-sized droplets in an expansion chamber maintained at a selected temperature and pressure, before delivery to the deposition chamber. We demonstrate the synthesis of monolayer MoS2 on SiO2/Si substrates using the DLI technique with film quality superior to exfoliated samples or those grown by traditional tube furnace chemical vapor deposition (CVD) methods. Photoluminescence measurements of DLI monolayers exhibit consistently brighter emission, narrower line width, and higher emission energy than their exfoliated and CVD counterparts. Conductive atomic force microscopy identifies a defect density of 8.3 × 1011/cm2 in DLI MoS2, lower than the measured density in CVD material and nearly an order of magnitude improvement over the exfoliated MoS2 investigated under the same conditions. The DLI method is directly applicable to many other van der Waals materials, which require the use of challenging low vapor pressure precursors, to the growth of alloys, and sequential growths of dissimilar materials leading to van der Waals heterostructures.
RESUMO
van der Waals heterostructures (vdWHs) leverage the characteristics of two-dimensional (2D) material building blocks to create a myriad of structures with unique and desirable properties. Several commonly employed fabrication strategies rely on polymeric stamps to assemble layers of 2D materials into vertical stacks. However, the properties of such heterostructures frequently are degraded by contaminants, typically of unknown composition, trapped between the constituent layers. Such contaminants, therefore, impede studies of the intrinsic properties of heterostructures and hinder their application. Here, we use the photothermal induced resonance (PTIR) technique to obtain infrared spectra and maps of the contaminants down to a few attomoles and with nanoscale resolution. Heterostructures comprised of WSe2, WS2, and hexagonal boron nitride layers were found to contain significant amounts of poly(dimethylsiloxane) (PDMS) and polycarbonate, corresponding to the stamp materials used in their construction. Additionally, we verify that an atomic force microscope-based "nanosqueegee" technique is an effective method for locally removing contaminants by comparing spectra within as-fabricated and cleaned regions. Having identified the source of the contaminants, we demonstrate that cleaning PDMS stamps with isopropyl alcohol or toluene prior to vdWH fabrication reduces PDMS contamination within the structures. The general applicability of the PTIR technique for identifying the sources corrupting vdWHs provides valuable guidance for devising mitigation strategies (e.g., stamp cleaning or pre-/post-treatments) and enhances capabilities for producing materials with precisely engineered properties.
RESUMO
Monolayers of transition-metal dichalcogenides (TMDs) are promising components for flexible optoelectronic devices because of their direct band gap and atomically thin nature. The photoluminescence (PL) from these materials is often strongly suppressed by nonradiative recombination mediated by midgap defect states. Here, we demonstrate up to a 200-fold increase in PL intensity from monolayer MoS2 synthesized by chemical vapor deposition (CVD) by controlled exposure to laser light in the ambient. This spatially resolved passivation treatment is stable in air and vacuum. Regions unexposed to laser light remain dark in fluorescence despite continuous impingement of ambient gas molecules. A wavelength-dependent study confirms that PL brightening is concomitant with exciton generation in the MoS2; laser light below the optical band gap fails to produce any enhancement in the PL. We highlight the photosensitive nature of the process by successfully brightening with a low-power broadband white light source. We decouple changes in absorption from defect passivation by examining the degree of circularly polarized PL. This measurement, which is independent of exciton generation, confirms that laser brightening reduces the rate of nonradiative recombination in the MoS2. A series of gas exposure studies demonstrate a clear correlation between PL brightening and the presence of water. We propose that H2O molecules passivate sulfur vacancies in the CVD-grown MoS2 but require photogenerated excitons to overcome a large adsorption barrier. This work represents an important step in understanding the passivation of CVD-synthesized TMDs and demonstrates the interplay between adsorption and exciton generation.
RESUMO
We present a paradigm for encoding strain into two-dimensional materials (2DMs) to create and deterministically place single-photon emitters (SPEs) in arbitrary locations with nanometer-scale precision. Our material platform consists of a 2DM placed on top of a deformable polymer film. Upon application of sufficient mechanical stress using an atomic force microscope tip, the 2DM/polymer composite deforms, resulting in formation of highly localized strain fields with excellent control and repeatability. We show that SPEs are created and localized at these nanoindents and exhibit single-photon emission up to 60 K, the highest temperature reported in these materials. This quantum calligraphy allows deterministic placement and real time design of arbitrary patterns of SPEs for facile coupling with photonic waveguides, cavities, and plasmonic structures. In addition to enabling versatile placement of SPEs, these results present a general methodology for imparting strain into 2DM with nanometer-scale precision, providing an invaluable tool for further investigations and future applications of strain engineering of 2DM and 2DM devices.
RESUMO
Two-dimensional (2D) materials exhibit many exciting phenomena that make them promising as materials for future electronic, optoelectronic, and mechanical devices. Because of their atomic thinness, interfaces play a dominant role in determining material behavior. In order to observe and exploit the unique properties of these materials, it is therefore vital to obtain clean and repeatable interfaces. However, the conventional mechanical stacking of atomically thin layers typically leads to trapped contaminants and spatially inhomogeneous interfaces, which obscure the true intrinsic behavior. This work presents a simple and generic approach to create clean 2D material interfaces in mechanically stacked structures. The operating principle is to use an AFM tip to controllably squeeze contaminants out from between 2D layers and their substrates, similar to a "squeegee". This approach leads to drastically improved homogeneity and consistency of 2D material interfaces, as demonstrated by AFM topography and significant reduction of photoluminescence line widths. Also, this approach enables emission from interlayer excitons, demonstrating that the technique enhances interlayer coupling in van der Waals heterostructures. The technique enables repeatable observation of intrinsic 2D material properties, which is crucial for the continued development of these promising materials.
RESUMO
An emerging class of semiconductor heterostructures involves stacking discrete monolayers such as transition metal dichalcogenides (TMDs) to form van der Waals heterostructures. In these structures, it is possible to create interlayer excitons (ILEs), spatially indirect, bound electron-hole pairs with the electron in one TMD layer and the hole in an adjacent layer. We are able to clearly resolve two distinct emission peaks separated by 24 meV from an ILE in a MoSe2/WSe2 heterostructure fabricated using state-of-the-art preparation techniques. These peaks have nearly equal intensity, indicating they are of common character, and have opposite circular polarizations when excited with circularly polarized light. Ab initio calculations successfully account for these observations: they show that both emission features originate from excitonic transitions that are indirect in momentum space and are split by spin-orbit coupling. Also, the electron is strongly hybridized between both the MoSe2 and WSe2 layers, with significant weight in both layers, contrary to the commonly assumed model. Thus, the transitions are not purely interlayer in character. This work represents a significant advance in our understanding of the static and dynamic properties of TMD heterostructures.