RESUMO
Despite the widespread use of fluoride for the prevention of dental caries, few studies have demonstrated the effects of fluoride on the bacterial composition of dental biofilms. This study investigated whether fluoride affects the proportion of Streptococcus mutans and S. oralis in mono- and dual-species biofilm models, via microbiological, biochemical, and confocal fluorescence microscope studies. Fluoride did not affect the bacterial count and bio-volume of S. mutans and S. oralis in mono-species biofilms, except for the 24-h-old S. mutans biofilms. However, fluoride reduced the proportion and bio-volume of S. mutans but did not decrease those of S. oralis during both S. oralis and S. mutans dual-species biofilm formation, which may be related to the decrease in extracellular polysaccharide formation by fluoride. These results suggest that fluoride may prevent the shift in the microbial proportion to cariogenic bacteria in dental biofilms, subsequently inhibiting the cariogenic bacteria dominant biofilm formation.
Assuntos
Antibiose/efeitos dos fármacos , Biofilmes/efeitos dos fármacos , Fluoretos/farmacologia , Streptococcus mutans/efeitos dos fármacos , Streptococcus oralis/efeitos dos fármacos , Carga Bacteriana/efeitos dos fármacos , Cárie Dentária/microbiologia , Relação Dose-Resposta a Droga , Humanos , Modelos Biológicos , Streptococcus mutans/crescimento & desenvolvimento , Streptococcus mutans/fisiologia , Streptococcus oralis/crescimento & desenvolvimento , Streptococcus oralis/fisiologiaRESUMO
Fluoride is commonly used as an ingredient of topical oral hygiene measures. Despite the anti-acidogenic activities of fluoride against cariogenic biofilms, the recovery of the biofilms from fluoride damage is unclear. Herein, we investigated the recovery of acid production in Streptococcus mutans biofilms after short-term or during periodic 1-min fluoride treatments. For this study, 46-hour-old S. mutans biofilms were treated with fluoride (0-2,000 ppm F-) for 1-8 min and then incubated in saliva for 0-100 min. The 74-hour-old biofilms were also periodically treated with the fluoride concentration during biofilm formation (1 min/treatment). Changes in acidogenicity and viability were determined via pH drop and colony-forming unit assays, respectively. In this study, acid production after a 1-min fluoride treatment was recovered as saliva incubation time increased, which followed a linear pattern of concentration dependence (R = 0.99, R2 = 0.98). The recovery pattern was in a biphasic pattern, with an initial rapid rate followed by a second slow recovery. Furthermore, recovery from fluoride damage was retarded in a concentration-dependent manner as treatment time increased. In periodic 1-min fluoride treatments, acid production in the biofilms was not diminished during the non-fluoride treatment period; however, it was reduced in a concentration-dependent manner during the fluoride treatment period. The viability of the biofilm cells did not change, even at high fluoride concentrations. Collectively, our results suggest that brief fluoride treatment does not sustain anti-acidogenic activity against S. mutans in biofilms since the damage is recoverable with time.
Assuntos
Biofilmes/efeitos dos fármacos , Cariostáticos/farmacologia , Cárie Dentária/microbiologia , Fluoretos Tópicos/farmacologia , Streptococcus mutans/efeitos dos fármacos , Biofilmes/crescimento & desenvolvimento , Cárie Dentária/terapia , Humanos , Concentração de Íons de Hidrogênio , Viabilidade Microbiana/efeitos dos fármacos , Higiene Bucal , Saliva/microbiologia , Fatores de TempoRESUMO
Despite the widespread use of fluoride, dental caries, a biofilm-related disease, remains an important health problem. This study investigated whether oleic acid, a monounsaturated fatty acid, can enhance the effect of fluoride on extracellular polysaccharide (EPS) formation by Streptococcus mutans UA159 biofilms at sub-minimum inhibitory concentration levels, via microbiological and biochemical methods, confocal fluorescence microscopy, and real-time PCR. The combination of oleic acid with fluoride inhibited EPS formation more strongly than did fluoride or oleic acid alone. The superior inhibition of EPS formation was due to the combination of the inhibitory effects of oleic acid and fluoride against glucosyltransferases (GTFs) and GTF-related gene (gtfB, gtfC, and gtfD) expression, respectively. In addition, the combination of oleic acid with fluoride altered the bacterial biovolume of the biofilms without bactericidal activity. These results suggest that oleic acid may be useful for enhancing fluoride inhibition of EPS formation by S. mutans biofilms, without killing the bacterium.
Assuntos
Biofilmes/efeitos dos fármacos , Cárie Dentária , Fluoretos/farmacologia , Ácido Oleico/farmacologia , Streptococcus mutans , Cariostáticos/farmacologia , Cárie Dentária/microbiologia , Cárie Dentária/prevenção & controle , Sinergismo Farmacológico , Glucosiltransferases/metabolismo , Humanos , Testes de Sensibilidade Microbiana , Microscopia Confocal , Reação em Cadeia da Polimerase em Tempo Real , Solventes/farmacologia , Streptococcus mutans/efeitos dos fármacos , Streptococcus mutans/fisiologiaRESUMO
Restoring an edentulous mouth is a challenge when the patient has both high esthetic expectations and financial limitations. This case report describes the prosthodontic management of an elderly edentulous patient with a maxillary anterior implant-supported fixed partial denture in conjunction with a distal extension-base removable partial denture opposing a mandibular implant-retained overdenture. The patient's clinical outcome after 30 months is presented.
Assuntos
Prótese Dentária Fixada por Implante , Prótese Total Inferior , Revestimento de Dentadura , Prótese Parcial Fixa , Prótese Parcial Removível , Idoso , Ligas de Cromo/química , Projeto do Implante Dentário-Pivô , Implantação Dentária Endóssea/métodos , Planejamento de Dentadura , Prótese Total Imediata , Prótese Parcial Temporária , Estética Dentária , Feminino , Seguimentos , Ligas de Ouro/química , Humanos , Mandíbula/cirurgia , Maxila/cirurgia , Boca Edêntula/reabilitação , Boca Edêntula/cirurgia , Planejamento de Assistência ao Paciente , Resultado do TratamentoRESUMO
Objectives: The aim of this study was to demonstrate the mode of action of glass ionomers (G-Is) against cariogenic biofilms in the slow fluoride release phase by analyzing the reciprocal interaction between fluoride release from G-Is and acid production of Streptococcus mutans biofilm. Methods: G-Is discs in the slow fluoride release phase were prepared and 51 h-old S. mutans biofilms were formed on these discs. The interrelationship between the acid production of the biofilm and the fluoride release of the G-Is discs was investigated by analyzing both factors simultaneously during the biofilm formation period. The composition of the 51 h-old biofilms was then examined using microbiological, biochemical, and confocal laser scanning microscopic methods. Results: Acid production by the cariogenic biofilm, particularly at < pH 5, promotes G-Is fluoride release. Conversely, G-Is fluoride release inhibits the acid production of the cariogenic biofilm. This reciprocal interaction results in the reduction of virulence such as extracellular polysaccharides formation and cariogenic biofilm bio-mass, which may reduce the potential of secondary caries development around G-Is. Conclusions: These results suggest that G-Is may play a role in preventing the development of secondary caries during the slow fluoride release phase.
RESUMO
This study was to evaluate the load bearing capacity of monolithic dental zirconia crowns, and the effect of surface finishing on fracture strength. (1) The zirconia plates were divided into 5 groups and polished by various types of polishing bur, every specimen was analyzed by surface roughness testing, and X-ray diffraction (XRD). (2) The zirconia crowns were classified into 4 groups corresponding to different surface treatments and thickness. All the crowns were cemented and subjected to a load of 7 kg for 5 min. Stored in distilled water at 37°C for 24 h. Observe the typical surface using field emission scanning electron microscopy (FE-SEM). The cycling and fracture tests were carried out. The data was statistically analyzed. The groups had better fracture strength after polishing. This suggests the monoclinic phase can be eliminated by optimizing the polishing process. Moreover, the fracture strength increased with occlusal thickness (p<0.05).
Assuntos
Resistência à Flexão , Dente , Coroas , Análise do Estresse Dentário , Teste de Materiais , Propriedades de Superfície , ZircônioRESUMO
PURPOSE: The purpose of this study was to assess the impact of the core materials, thickness and fabrication methods of veneering porcelain on prosthesis fracture in the porcelain fused to metal and the porcelain veneered zirconia. MATERIALS AND METHODS: Forty nickel-chrome alloy cores and 40 zirconia cores were made. Half of each core group was 0.5 mm-in thickness and the other half was 1.0 mm-in thickness. Thus, there were four groups with 20 cores/group. Each group was divided into two subgroups with two different veneering methods (conventional powder/liquid layering technique and the heat-pressing technique). Tensile strength was measured using the biaxial flexural strength test based on the ISO standard 6872:2008 and Weibull analysis was conducted. Factors influencing fracture strength were analyzed through three-way ANOVA (α≤.05) and the influence of core thickness and veneering method in each core materials was assessed using two-way ANOVA (α≤.05). RESULTS: The biaxial flexural strength test showed that the fabrication method of veneering porcelain has the largest impact on the fracture strength followed by the core thickness and the core material. In the metal groups, both the core thickness and the fabrication method of the veneering porcelain significantly influenced on the fracture strength, while only the fabrication method affected the fracture strength in the zirconia groups. CONCLUSION: The fabrication method is more influential to the strength of a prosthesis compared to the core character determined by material and thickness of the core.
RESUMO
PURPOSE: The purpose of this study was to evaluate cell toxicity due to ion release caused by galvanic corrosion as a result of contact between base metal and titanium. MATERIALS AND METHODS: It was hypothesized that Nickel (Ni)-Chromium (Cr) alloys with different compositions possess different corrosion resistances when contacted with titanium abutment, and therefore in this study, specimens (10×10×1.5 mm) were fabricated using commercial pure titanium and 3 different types of Ni-Cr alloys (T3, Tilite, Bella bond plus) commonly used for metal ceramic restorations. The specimens were divided into 6 groups according to the composition of Ni-Cr alloy and contact with titanium. The experimental groups were in direct contact with titanium and the control groups were not. After the samples were immersed in the culture medium - Dulbecco's modified Eagle's medium[DMEM] for 48 hours, the released metal ions were detected using inductively coupled plasma mass spectrometer (ICP-MS) and analyzed by the Kruskal-Wallis and Mann-Whitney test (P<.05). Mouse L-929 fibroblast cells were used for cell toxicity evaluation. The cell toxicity of specimens was measured by the 3-{4,5-dimethylthiazol-2yl}-2,5-diphenyltetrazolium bromide (MTT) test. Results of MTT assay were statistically analyzed by the two-way ANOVA test (P<.05). Post-hoc multiple comparisons were conducted using Tukey's tests. RESULTS: The amount of metal ions released by galvanic corrosion due to contact between the base metal alloy and titanium was increased in all of the specimens. In the cytotoxicity test, the two-way ANOVA showed a significant effect of the alloy type and galvanic corrosion for cytotoxicity (P<.001). The relative cell growth rate (RGR) was decreased further on the groups in contact with titanium (P<.05). CONCLUSION: The release of metal ions was increased by galvanic corrosion due to contact between base metal and titanium, and it can cause adverse effects on the tissue around the implant by inducing cytotoxicity.
RESUMO
Withania somnifera (Ashwagandha) is a plant of the Solanaceae family. It has been widely used as a remedy for a variety of ailments in India and Nepal. The plant has also been used as a controlling agent for dental diseases. The aim of the present study was to evaluate the activity of the methanol extract of W. somnifera against the physiological ability of cariogenic biofilms and to identify the components of the extract. To determine the activity of the extract, assays for sucrose-dependent bacterial adherence, glycolytic acid production, acid tolerance, and extracellular polysaccharide formation were performed using Streptococcus mutans biofilms. The viability change of S. mutans biofilms cells was also determined. A phytochemical analysis of the extract was performed using TLC and LC/MS/MS. The extract showed inhibitory effects on sucrose-dependent bacterial adherence (≥ 100 µg/ml), glycolytic acid production (≥ 300 µg/ml), acid tolerance (≥ 300 µg/ml), and extracellular polysaccharide formation (≥ 300 µg/ml) of S. mutans biofilms. However, the extract did not alter the viability of S. mutans biofilms cells in all concentrations tested. Based on the phytochemical analysis, the activity of the extract may be related to the presence of alkaloids, anthrones, coumarines, anthraquinones, terpenoids, flavonoids, and steroid lactones (withanolide A, withaferin A, withanolide B, withanoside IV, and 12-deoxy withastramonolide). These data indicate that W. somnifera may be a potential agent for restraining the physiological ability of cariogenic biofilms.
Assuntos
Ácidos/metabolismo , Biofilmes/efeitos dos fármacos , Extratos Vegetais/química , Extratos Vegetais/farmacologia , Polissacarídeos Bacterianos/biossíntese , Streptococcus mutans/fisiologia , Streptococcus mutans/patogenicidade , Withania , Alcaloides , Antracenos , Antraquinonas , Aderência Bacteriana/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Cromatografia Líquida , Cumarínicos , Cárie Dentária/microbiologia , Cárie Dentária/prevenção & controle , Relação Dose-Resposta a Droga , Flavonoides , Lactonas , Fotoquímica , Streptococcus mutans/metabolismo , Espectrometria de Massas em Tandem , Terpenos , Virulência , VitanolídeosRESUMO
PURPOSE: The purpose of this study was to compare the accuracy of the implant master cast according to the type (pick-up, transfer) and the length (long, short) of the impression copings. MATERIALS AND METHODS: The metal master cast was fabricated with three internal connection type implant analogs (Osstem GS III analog), embedded parallel and with 10° of mesial angulation to the center analog. Four types of impression coping were prepared with different combinations of types (transfer, pick-up) and lengths (long, short) of the coping. The impressions were made using vinyl polysiloxane (one step, heavy + light body) with an individual tray, and 10 impressions were made for each group. Eventually, 40 experimental casts were produced. Then, the difference in the distance between the master cast and the experimental cast were measured, and the error rate was determined. The analysis of variance was performed using the SPSS (v 12.0) program (α = .05), and the statistical significance was set at P < .05. RESULTS: The ANOVA showed that the pick-up type impression coping exhibited a significantly lower error rate than the transfer type. However, no significant difference was observed with respect to the length of the impression coping. Additionally, no significant difference was observed between the parallel and mesial angulated groups. CONCLUSION: Within the limitations of this study, the pick-up type impression coping exhibited a more accurate implant master cast than the transfer type in parallel group. The accuracy of the implant master cast did not differ for different lengths of impression coping of at least 11 mm. Additionally, the accuracy of the implant cast was not different for the parallel and 10° mesial angulated groups.