Genome- and transcriptome-wide off-target analyses of a high-efficiency adenine base editor in tomato.

Adenine base editors (ABEs) are valuable, precise genome editing tools in plants. In recent years, the highly promising ADENINE BASE EDITOR8e (ABE8e) was reported for efficient A-to-G editing. However, compared to monocots, comprehensive off-target analyses for ABE8e are lacking in dicots. To determine the occurrence of off-target effects in tomato (Solanum lycopersicum), we assessed ABE8e and a high-fidelity version, ABE8e-HF, at 2 independent target sites in protoplasts, as well as stable T0 lines. Since ABE8e demonstrated higher on-target efficiency than ABE8e-HF in tomato protoplasts, we focused on ABE8e for off-target analyses in T0 lines. We conducted whole-genome sequencing (WGS) of wild-type (WT) tomato plants, green fluorescent protein (GFP)-expressing T0 lines, ABE8e-no-gRNA control T0 lines, and edited T0 lines. No guide RNA (gRNA)-dependent off-target edits were detected. Our data showed an average of approximately 1,200 to 1,500 single-nucleotide variations (SNVs) in either GFP control plants or base-edited plants. Also, no specific enrichment of A-to-G mutations were found in base-edited plants. We also conducted RNA sequencing (RNA-seq) of the same 6 base-edited and 3 GFP control T0 plants. On average, approximately 150 RNA-level SNVs were discovered per plant for either base-edited or GFP controls. Furthermore, we did not find enrichment of a TA motif on mutated adenine in the genomes and transcriptomes in base-edited tomato plants, as opposed to the recent discovery in rice (Oryza sativa). Hence, we could not find evidence for genome- and transcriptome-wide off-target effects by ABE8e in tomato.

Genome-wide analyses of PAM-relaxed Cas9 genome editors reveal substantial off-target effects by ABE8e in rice.

PAM-relaxed Cas9 nucleases, cytosine base editors and adenine base editors are promising tools for precise genome editing in plants. However, their genome-wide off-target effects are largely unexplored. Here, we conduct whole-genome sequencing (WGS) analyses of transgenic plants edited by xCas9, Cas9-NGv1, Cas9-NG, SpRY, nCas9-NG-PmCDA1, nSpRY-PmCDA1 and nSpRY-ABE8e in rice. Our results reveal that Cas9 nuclease and base editors, when coupled with the same guide RNA (gRNA), prefer distinct gRNA-dependent off-target sites. De novo generated gRNAs by SpRY editors lead to additional, but insubstantial, off-target mutations. Strikingly, ABE8e results in ~500 genome-wide A-to-G off-target mutations at TA motif sites per transgenic plant. ABE8e's preference for the TA motif is also observed at the target sites. Finally, we investigate the timeline and mechanism of somaclonal variation due to tissue culture, which chiefly contributes to the background mutations. This study provides a comprehensive understanding on the scale and mechanisms of off-target and background mutations occurring during PAM-relaxed genome editing in plants.

CRISPR-BETS: a base-editing design tool for generating stop codons.

Cytosine base editors (CBEs) can install a predefined stop codon at the target site, representing a more predictable and neater method for creating genetic knockouts without altering the genome size. Due to the enhanced predictability of the editing outcomes, it is also more efficient to obtain homozygous mutants in the first generation. With the recent advancement of CBEs on improved editing activity, purify and specificity in plants and animals, base editing has become a more appealing technology for generating knockouts. However, there is a lack of design tools that can aid the adoption of CBEs for achieving such a purpose, especially in plants. Here, we developed a user-friendly design tool named CRISPR-BETS (base editing to stop), which helps with guide RNA (gRNA) design for introducing stop codons in the protein-coding genes of interest. We demonstrated in rice and tomato that CRISPR-BETS is easy-to-use, and its generated gRNAs are highly specific and efficient for generating stop codons and obtaining homozygous knockout lines. While we tailored the tool for the plant research community, CRISPR-BETS can also serve non-plant species.

Genome- and transcriptome-wide off-target analyses of an improved cytosine base editor.

Cytosine base editors (CBEs) are the promising tools for precise genome editing in plants. It is important to investigate potential off-target effects of an efficient CBE at the genome and transcriptome levels in a major crop. Based on comparison of five cytidine deaminases and two different promoters for expressing single-guide RNAs (sgRNAs), we tested a highly efficient A3A/Y130F-BE3 system for efficient C-to-T base editing in tomato (Solanum lycopersicum). We then conducted whole-genome sequencing of four base-edited tomato plants, three Green fluorescent protein (GFP)-expressing control plants, and two wild-type plants. The sequencing depths ranged from 25× to 49× with read mapping rates >97%. No sgRNA-dependent off-target mutations were detected. Our data show an average of approximately 1,000 single-nucleotide variations (SNVs) and approximately 100 insertions and deletions (indels) per GFP control plant. Base-edited plants had on average elevated levels of SNVs (approximately 1,250) and indels (approximately 300) per plant. On average, about 200 more C-to-T (G-to-A) mutations were found in a base-edited plant than a GFP control plant, suggesting some level of sgRNA-independent off-target effects, though the difference is not statistically significant. We also conducted RNA sequencing of the same four base-edited plants and three GFP control plants. An average of approximately 200 RNA SNVs was discovered per plant for either base-edited or GFP control plants. Furthermore, no specific enrichment of C-to-U mutations can be found in the base-edited plants. Hence, we cannot find any evidence for bona fide off-target mutations by A3A/Y130F-BE3 at the transcriptome level.

Improved plant cytosine base editors with high editing activity, purity, and specificity.

Cytosine base editors (CBEs) are great additions to the expanding genome editing toolbox. To improve C-to-T base editing in plants, we first compared seven cytidine deaminases in the BE3-like configuration in rice. We found A3A/Y130F-CBE_V01 resulted in the highest C-to-T base editing efficiency in both rice and Arabidopsis. Furthermore, we demonstrated this A3A/Y130F cytidine deaminase could be used to improve iSpyMacCas9-mediated C-to-T base editing at A-rich PAMs. To showcase its applications, we first applied A3A/Y130F-CBE_V01 for multiplexed editing to generate microRNA-resistant mRNA transcripts as well as pre-mature stop codons in multiple seed trait genes. In addition, we harnessed A3A/Y130F-CBE_V01 for efficient artificial evolution of novel ALS and EPSPS alleles which conferred herbicide resistance in rice. To further improve C-to-T base editing, multiple CBE_V02, CBE_V03 and CBE_V04 systems were developed and tested in rice protoplasts. The CBE_V04 systems were found to have improved editing activity and purity with focal recruitment of more uracil DNA glycosylase inhibitors (UGIs) by the engineered single guide RNA 2.0 scaffold. Finally, we used whole-genome sequencing (WGS) to compare six CBE_V01 systems and four CBE_V04 systems for genome-wide off-target effects in rice. Different levels of cytidine deaminase-dependent and sgRNA-independent off-target effects were indeed revealed by WGS among edited lines by these CBE systems. We also investigated genome-wide sgRNA-dependent off-target effects by different CBEs in rice. This comprehensive study compared 21 different CBE systems, and benchmarked PmCDA1-CBE_V04 and A3A/Y130F-CBE_V04 as next-generation plant CBEs with high editing efficiency, purity, and specificity.

Application of CRISPR-Cas12a temperature sensitivity for improved genome editing in rice, maize, and Arabidopsis.

BACKGROUND: CRISPR-Cas12a (formerly Cpf1) is an RNA-guided endonuclease with distinct features that have expanded genome editing capabilities. Cas12a-mediated genome editing is temperature sensitive in plants, but a lack of a comprehensive understanding on Cas12a temperature sensitivity in plant cells has hampered effective application of Cas12a nucleases in plant genome editing. RESULTS: We compared AsCas12a, FnCas12a, and LbCas12a for their editing efficiencies and non-homologous end joining (NHEJ) repair profiles at four different temperatures in rice. We found that AsCas12a is more sensitive to temperature and that it requires a temperature of over 28 °C for high activity. Each Cas12a nuclease exhibited distinct indel mutation profiles which were not affected by temperatures. For the first time, we successfully applied AsCas12a for generating rice mutants with high frequencies up to 93% among T0 lines. We next pursued editing in the dicot model plant Arabidopsis, for which Cas12a-based genome editing has not been previously demonstrated. While LbCas12a barely showed any editing activity at 22 °C, its editing activity was rescued by growing the transgenic plants at 29 °C. With an early high-temperature treatment regime, we successfully achieved germline editing at the two target genes, GL2 and TT4, in Arabidopsis transgenic lines. We then used high-temperature treatment to improve Cas12a-mediated genome editing in maize. By growing LbCas12a T0 maize lines at 28 °C, we obtained Cas12a-edited mutants at frequencies up to 100% in the T1 generation. Finally, we demonstrated DNA binding of Cas12a was not abolished at lower temperatures by using a dCas12a-SRDX-based transcriptional repression system in Arabidopsis. CONCLUSION: Our study demonstrates the use of high-temperature regimes to achieve high editing efficiencies with Cas12a systems in rice, Arabidopsis, and maize and sheds light on the mechanism of temperature sensitivity for Cas12a in plants.

Single transcript unit CRISPR 2.0 systems for robust Cas9 and Cas12a mediated plant genome editing.

CRISPR-Cas9 and Cas12a are two powerful genome editing systems. Expression of CRISPR in plants is typically achieved with a mixed dual promoter system, in which Cas protein is expressed by a Pol II promoter and a guide RNA is expressed by a species-specific Pol III promoter such as U6 or U3. To achieve coordinated expression and compact vector packaging, it is desirable to express both CRISPR components under a single Pol II promoter. Previously, we demonstrated a first-generation single transcript unit (STU)-Cas9 system, STU-Cas9-RZ, which is based on hammerhead ribozyme for processing single guide RNAs (sgRNAs). In this study, we developed two new STU-Cas9 systems and one STU-Cas12a system for applications in plants, collectively called the STU CRISPR 2.0 systems. We demonstrated these systems for genome editing in rice with both transient expression and stable transgenesis. The two STU-Cas9 2.0 systems process the sgRNAs with Csy4 ribonuclease and endogenous tRNA processing system respectively. Both STU-Cas9-Csy4 and STU-Cas9-tRNA systems showed more robust genome editing efficiencies than our first-generation STU-Cas9-RZ system and the conventional mixed dual promoter system. We further applied the STU-Cas9-tRNA system to compare two C to T base editing systems based on rAPOBEC1 and PmCDA1 cytidine deaminases. The results suggest STU-based PmCDA1 base editor system is highly efficient in rice. The STU-Cas12a system, based on Cas12a' self-processing of a CRISPR RNA (crRNA) array, was also developed and demonstrated for expression of a single crRNA and four crRNAs. Altogether, our STU CRISPR 2.0 systems further expanded the CRISPR toolbox for plant genome editing and other applications.

Structure and Dynamics of a Model Polymer Mixture Mimicking a Levan-Based Bacterial Biofilm of Bacillus subtilis.

In this paper, we report on the structure and dynamics of biologically important model polymer mixtures that mimic the extracellular polymeric matrix in native biofilm of Bacillus subtilis. This biofilm is rich in nonionic polysaccharide levan, but also contains other biopolymers such as DNA and proteins in small concentrations. Aiming to identify the contribution of each component to the formation of the biofilm, our investigations encompassed dynamic rheology, small-angle X-ray scattering, dynamic light scattering, microscopy, densitometry, and sound velocity measurements. As it turned out, this very powerful combination of techniques is able to provide solid results on the dynamical and structural aspects of the microbiologically and chemically complex biofilm formations. Macroscopic rheological measurements revealed that the addition of DNA to levan solution increased the viscosity, pseudoplasticity, and elasticity of the system. The addition of protein contributed similarly, but also increased the rigidity of the system. This confirms that the presence of minor biofilm components is essential for biofilm formation. DNA and proteins appear to confine levan molecules within their supramolecular structure and, in this way, restrict the role of levan to merely a filling agent. These findings were complemented by small-angle X-ray scattering data, which provided insight into the structure on a molecular scale. One of the essential goals of this work was to compare the structural properties of the native biofilm and synthetic biofilm mixture.

Viscoelastic properties of levan-DNA mixtures important in microbial biofilm formation as determined by micro- and macrorheology.

We studied the viscoelastic properties of homogeneous and inhomogeneous levan-DNA mixtures using optical tweezers and a rotational rheometer. Levan and DNA are important components of the extracellular matrix of bacterial biofilms. Their viscoelastic properties influence the mechanical as well as molecular-transport properties of biofilm. Both macro- and microrheology measurements in homogeneous levan-DNA mixtures revealed pseudoplastic behavior. When the concentration of DNA reached a critical value, levan started to aggregate, forming clusters of a few microns in size. Microrheology using optical tweezers enabled us to measure local viscoelastic properties within the clusters as well as in the DNA phase surrounding the levan aggregates. In phase-separated levan-DNA mixtures, the results of macro- and microrheology differed significantly. The local viscosity and elasticity of levan increased, whereas the local viscosity of DNA decreased. On the other hand, the results of bulk viscosity measurements suggest that levan clusters do not interact strongly with DNA. Upon treatment with DNase, levan aggregates dispersed. These results demonstrate the advantages of microrheological measurements compared to bulk viscoelastic measurements when the materials under investigation are complex and inhomogeneous, as is often the case in biological samples.

Evaluating SAXS Results on Aqueous Solutions of Various Bacterial Levan utilizing the String-of-Beads Model.

Polysaccharide levan is a homopolymer of fructose and is an important component of plants, yeast, fungi and some bacterial biofilms. In this paper we report on the structural properties of aqueous solutions of bacterial levan utilizing smallangle X-ray scattering and light microscopy. In addition to commercially available levan isolated from Zymomonas mobilis and Erwinia herbicola, we also studied levan isolated and purified from the biofilm of Bacillus subtilis. The smallangle X-ray scattering data were analyzed by the string-of-beads model that revealed qualitative differences in the structure of levan molecules. Levan can be represented as a semi-flexible chain that interacts intra- and inter-molecularly and therefore forms various suprastructures on larger size scales. Increasing the concentration of levan makes the levan structure more compact, which was observed on the nano as well as on the micro scale. The structures with most homogeneously distributed polymer local density were found in B. subtilis levan solutions.

Base Editing in Poplar Through an Agrobacterium-Mediated Transformation Method.

CRISPR-Cas9 systems have revolutionized genome editing in plants and facilitated gene knockout and functional genomic studies in woody plants, like poplar. However, in tree species, previous studies have only focused on targeting indel mutations through CRISPR-based nonhomologous end joining (NHEJ) pathway. Cytosine base editors (CBEs) and adenine base editors (ABEs) enable C-to-T and A-to-G base changes, respectively. These base editors can introduce premature stop codons and amino acid changes, alter RNA splicing sites, and edit cis-regulatory elements of promoters. Base editing systems have only been recently established in trees. In this chapter, we describe a detailed, robust, and thoroughly tested protocol for preparing T-DNA vectors with two highly efficient CBEs, PmCDA1-BE3 and A3A/Y130F-BE3, and the highly efficient ABE8e as well as delivering the T-DNA through an improved protocol for Agrobacterium-mediated transformation in poplar. This chapter will provide promising application potential for precise base editing in poplar and other trees.

PAM-Less CRISPR-SpRY Genome Editing in Plants.

Engineered SpCas9 variant, SpRY, has been demonstrated to facilitate protospacer adjacent motif (PAM) unrestricted targeting of genomic DNA in various biological systems. Here we describe fast, efficient, and robust preparation of SpRY-derived genome and base editors that can be easily adapted to target various DNA sequences in plants due to modular Gateway assembly. Presented are detailed protocols for preparing T-DNA vectors for genome and base editors and for assessing genome editing efficiency through transient expression of these reagents in rice protoplasts.

Expanding the targeting scope of FokI-dCas nuclease systems with SpRY and Mb2Cas12a.

CRISPR-Cas9 and Cas12a are widely used sequence-specific nucleases (SSNs) for genome editing. The nuclease domains of Cas proteins can induce DNA double strand breaks upon RNA guided DNA targeting. Zinc finger nucleases (ZFNs) and Transcription Activator-Like Effector Nucleases (TALENs) have been popular SSNs prior to CRISPR. Both ZFNs and TALENs are based on reconstitution of two monomers with each consisting of a DNA binding domain and a FokI nuclease domain. Inspired by the configuration of ZFNs and TALENs, dimeric FokI-dCas9 systems were previously demonstrated in human cells. Such configuration, based on a pair of guide RNAs (gRNAs), offers great improvement on targeting specificity. To expand the targeting scope of dimeric FokI-dCas systems, the PAM (protospacer adjacent motif)-less SpRY Cas9 variant and the PAM-relaxed Mb2Cas12a system were explored. Rice cells showed that FokI-dSpRY had more robust editing efficiency than a paired SpRY nickase system. Furthermore, a dimeric FokI-dMb2Cas12a system was developed that displayed comparable editing activity to Mb2Cas12a nuclease in rice cells. Finally, a single-chain FokI-FokI-dMb2Cas12a system was developed that cuts DNA outside its targeting sequence, which could be useful for many versatile applications. Together, this work greatly expanded the FokI based CRISPR-Cas systems for genome editing.

Boosting plant genome editing with a versatile CRISPR-Combo system.

CRISPR-Cas9, its derived base editors and CRISPR activation systems have greatly aided genome engineering in plants. However, these systems are mostly used separately, leaving their combinational potential largely untapped. Here we develop a versatile CRISPR-Combo platform, based on a single Cas9 protein, for simultaneous genome editing (targeted mutagenesis or base editing) and gene activation in plants. We showcase the powerful applications of CRISPR-Combo for boosting plant genome editing. First, CRISPR-Combo is used to shorten the plant life cycle and reduce the efforts in screening transgene-free genome-edited plants by activation of a florigen gene in Arabidopsis. Next, we demonstrate accelerated regeneration and propagation of genome-edited plants by activation of morphogenic genes in poplar. Furthermore, we apply CRISPR-Combo to achieve rice regeneration without exogenous plant hormones, which is established as a new method to predominately enrich heritable targeted mutations. In conclusion, CRISPR-Combo is a versatile genome engineering tool with promising applications in crop breeding.

CRISPR/dCas-mediated transcriptional and epigenetic regulation in plants.

The CRISPR/Cas (Clustered Regularly Interspaced Short Palindromic Repeats/CRISPR Associated) system-mediated precise genome editing has revolutionized genome engineering due to ease of use and versatility of multiplexing. Catalytically inactivated Cas variants (dCas) further expand the usefulness of the CRISPR/Cas system for genetics studies and translational research without inducing DNA double-strand breaks. Fusion of diverse effector domains to dCas proteins empowers the CRISPR/dCas system as a multifunctional platform for gene expression regulation, epigenetic regulation and sequence-specific imaging. In this short review, we summarize the recent advances of CRISPR/dCas-mediated transcriptional activation and repression, and epigenetic modifications. We also highlight the future directions and broader applications of the CRISPR/dCas systems in plants.

Rapid Vector Construction and Assessment of BE3 and Target-AID C to T Base Editing Systems in Rice Protoplasts.

CRISPR-Cas9 has revolutionized the field of genome engineering. Base editing, a new genome editing strategy, was recently developed to engineer nucleotide substitutions. DNA base editing systems use a catalytically impared Cas nuclease together with a nucleobase deaminase enzyme to specifically introduce point mutations without generating double-stranded breaks, which provide huge potential in crop improvement. Here, we describe fast and efficient preparation of user-friendly C to T base editors, BE3, and Target-AID. Presented are detailed protocols for T-DNA vector preparation with BE3 or modified Target-AID base editor based on Gateway assembly and efficiency assessment of base editing through a rice protoplast transient expression system.

Precise plant genome editing using base editors and prime editors.

The development of CRISPR-Cas systems has sparked a genome editing revolution in plant genetics and breeding. These sequence-specific RNA-guided nucleases can induce DNA double-stranded breaks, resulting in mutations by imprecise non-homologous end joining (NHEJ) repair or precise DNA sequence replacement by homology-directed repair (HDR). However, HDR is highly inefficient in many plant species, which has greatly limited precise genome editing in plants. To fill the vital gap in precision editing, base editing and prime editing technologies have recently been developed and demonstrated in numerous plant species. These technologies, which are mainly based on Cas9 nickases, can introduce precise changes into the target genome at a single-base resolution. This Review provides a timely overview of the current status of base editors and prime editors in plants, covering both technological developments and biological applications.

Expanding plant genome-editing scope by an engineered iSpyMacCas9 system that targets A-rich PAM sequences.

The most popular CRISPR-SpCas9 system recognizes canonical NGG protospacer adjacent motifs (PAMs). Previously engineered SpCas9 variants, such as Cas9-NG, favor G-rich PAMs in genome editing. In this manuscript, we describe a new plant genome-editing system based on a hybrid iSpyMacCas9 platform that allows for targeted mutagenesis, C to T base editing, and A to G base editing at A-rich PAMs. This study fills a major technology gap in the CRISPR-Cas9 system for editing NAAR PAMs in plants, which greatly expands the targeting scope of CRISPR-Cas9. Finally, our vector systems are fully compatible with Gateway cloning and will work with all existing single-guide RNA expression systems, facilitating easy adoption of the systems by others. We anticipate that more tools, such as prime editing, homology-directed repair, CRISPR interference, and CRISPR activation, will be further developed based on our promising iSpyMacCas9 platform.

Exploring C-To-G Base Editing in Rice, Tomato, and Poplar.

As a precise genome editing technology, base editing is broadly used in both basic and applied plant research. Cytosine base editors (CBEs) and adenine base editors (ABEs) represent the two commonly used base editor types that mediate C-to-T and A-to-G base transition changes at the target sites, respectively. To date, no transversion base editors have been described in plants. Here, we assessed three C-to-G base editors (CGBEs) for targeting sequences with SpCas9's canonical NGG protospacer adjacent motifs (PAMs) as well as three PAM-less SpRY-based CGBEs for targeting sequences with relaxed PAM requirements. The analyses in rice and tomato protoplasts showed that these CGBEs could make C-to-G conversions at the target sites, and they preferentially edited the C6 position in the 20-nucleotide target sequence. C-to-T edits, insertions and deletions (indels) were major byproducts induced by these CGBEs in the protoplast systems. Further assessment of these CGBEs in stably transformed rice and poplar plants revealed the preference for editing of non-GC sites, and C-to-T edits are major byproducts. Successful C-to-G editing in stably transgenic rice plants was achieved by rXRCC1-based CGBEs with monoallelic editing efficiencies up to 38% in T0 lines. The UNG-rAPOBEC1 (R33A)-based CGBE resulted in successful C-to-G editing in polar, with monoallelic editing efficiencies up to 6.25% in T0 lines. Overall, this study revealed that different CGBEs have different preference on preferred editing sequence context, which could be influenced by cell cycles, DNA repair pathways, and plant species.