Single-molecule dissection of the high-affinity cohesin-dockerin complex.

Cellulose-degrading enzyme systems are of significant interest from both a scientific and technological perspective due to the diversity of cellulase families, their unique assembly and substrate binding mechanisms, and their potential applications in several key industrial sectors, notably cellulose hydrolysis for second-generation biofuel production. Particularly fascinating are cellulosomes, the multimodular extracellular complexes produced by numerous anaerobic bacteria. Using single-molecule force spectroscopy, we analyzed the mechanical stability of the intermolecular interfaces between the cohesin and the dockerin modules responsible for self-assembly of the cellulosomal components into the multienzyme complex. The observed cohesin-dockerin rupture forces (>120 pN) are among the highest reported for a receptor-ligand system to date. Using an atomic force microscope protocol that quantified single-molecule binding activity, we observed force-induced dissociation of calcium ions from the duplicated loop-helix F-hand motif located within the dockerin module, which in the presence of EDTA resulted in loss of affinity to the cohesin partner. A cohesin amino acid mutation (D39A) that eliminated hydrogen bonding with the dockerin's critically conserved serine residues reduced the observed rupture forces. Consequently, no calcium loss occurred and dockerin activity was maintained throughout multiple forced dissociation events. These results offer insights at the single-molecule level into the stability and folding of an exquisite class of high-affinity protein-protein interactions that dictate fabrication and architecture of cellulose-degrading molecular machines.

Placing individual molecules in the center of nanoapertures.

While nanophotonic devices are unfolding their potential for single-molecule fluorescence studies, metallic quenching and steric hindrance, occurring within these structures, raise the desire for site-specific immobilization of the molecule of interest. Here, we refine the single-molecule cut-and-paste technique by optical superresolution routines to immobilize single fluorescent molecules in the center of nanoapertures. By comparing their fluorescence lifetime and intensity to stochastically immobilized fluorophores, we characterize the electrodynamic environment in these nanoapertures and proof the nanometer precision of our loading method.

Functional assembly of aptamer binding sites by single-molecule cut-and-paste.

Bottom up assembly of functional molecular ensembles with novel properties emerging from composition and arrangement of its constituents is a prime goal of nanotechnology. By single-molecule cut-and-paste we assembled binding sites for malachite green in a molecule-by-molecule assembly process from the two halves of a split aptamer. We show that only a perfectly joined binding site immobilizes the fluorophore and enhances the fluorescence quantum yield by several orders of magnitude. To corroborate the robustness of this approach we produced a micrometer-sized structure consisting of more than 500 reconstituted binding sites. To the best of our knowledge, this is the first demonstration of one by one bottom up functional biomolecular assembly.

Nanoscale arrangement of proteins by single-molecule cut-and-paste.

Protein-based nanostructures are key to the organization of life and it is their precise arrangement, which determines their specific functions. A single-molecule approach for the directed assembly of protein arrangements allows for a controlled composition of systems based on protein components. Applying antibodies and antigenic peptide tags we utilized the Single-Molecule Cut-and-Paste (SMC&P) technique for the handling of single proteins. Protein-DNA complexes could be arranged to complex patterns with the functionality of the protein part remaining unimpaired.

Peptide-antibody complex as handle for single-molecule cut & paste.

Molecule-by-molecule arrangement of proteins, for example, in enzymatic networks of predefined composition and proximity, is a major goal that may be accomplished by the single-molecule cut-and-paste technique (SMC&P). For this purpose, co-expressed anchors and handles as protein tags should be employed. As a first step in this direction, the authors develop an SMC&P design which exploits an antibody-peptide complex as a molecular handle.

A conditional gating mechanism assures the integrity of the molecular force-sensor titin kinase.

As more and more recent investigations point out, force plays an important role in cellular regulation mechanisms. Biological responses to mechanical stress are often based on force-induced conformational changes of single molecules. The force sensor, titin kinase, is involved in a signaling complex that regulates protein turnover and transcriptional adaptation in striated muscle. The structural architecture of such a force sensor determines its response to force and must assure both activity and mechanical integrity, which are prerequisites for its function. Here, we use single-molecule force-clamp spectroscopy to show that titin kinase is organized in such a way that the regulatory domains have to unfold before secondary structure elements that determine the overall fold and catalytic function. The stepwise unfolding over many barriers with a topologically determined sequence assures that the protein can react to force by conformational changes while maintaining its structural integrity.

Resolving single-molecule assembled patterns with superresolution blink-microscopy.

In this paper we experimentally combine a recently developed AFM-based molecule-by-molecule assembly (single-molecule cut-and-paste, SMCP) with subdiffraction resolution fluorescence imaging. Using "Blink-Microscopy", which exploits the fluctuating emission of single molecules for the reconstruction of superresolution images, we resolved SMCP assembled structures with features below the diffraction limit. Artificial line patterns then served as calibration structures to characterize parameters, such as the labeling density, that can influence resolution of Blink-Microscopy besides the localization precision of a single molecule. Finally, we experimentally utilized the adjustability of blink parameters to demonstrate the general connection of photophysical parameters with spatial resolution and acquisition time in superresolution microscopy.

Interlaboratory round robin on cantilever calibration for AFM force spectroscopy.

Single-molecule force spectroscopy studies performed by Atomic Force Microscopes (AFMs) strongly rely on accurately determined cantilever spring constants. Hence, to calibrate cantilevers, a reliable calibration protocol is essential. Although the thermal noise method and the direct Sader method are frequently used for cantilever calibration, there is no consensus on the optimal calibration of soft and V-shaped cantilevers, especially those used in force spectroscopy. Therefore, in this study we aimed at establishing a commonly accepted approach to accurately calibrate compliant and V-shaped cantilevers. In a round robin experiment involving eight different laboratories we compared the thermal noise and the Sader method on ten commercial and custom-built AFMs. We found that spring constants of both rectangular and V-shaped cantilevers can accurately be determined with both methods, although the Sader method proved to be superior. Furthermore, we observed that simultaneous application of both methods on an AFM proved an accurate consistency check of the instrument and thus provides optimal and highly reproducible calibration. To illustrate the importance of optimal calibration, we show that for biological force spectroscopy studies, an erroneously calibrated cantilever can significantly affect the derived (bio)physical parameters. Taken together, our findings demonstrated that with the pre-established protocol described reliable spring constants can be obtained for different types of cantilevers.

Photothermal cantilever actuation for fast single-molecule force spectroscopy.

Photothermal cantilever excitation provides a fast and easy to implement means to control the deflection of standard atomic force microscopy cantilevers. Minute heat pulses yield deflections on the order of several tens of nanometers or when the deflection is kept constant, forces of several hundreds of piconewton can be applied. In our case these pulses resulted in less than 1 K temperature changes at the sample position. Here we present and characterize the implementation of photothermal actuation for single-molecule force-spectroscopy experiments. When molecules are stretched under force-clamp conditions, fast control cycles that re-establish the pulling force after the rupture of molecular domains are essential for detecting the complete unfolding pattern with high precision. By combining the fast response of photothermal cantilever excitation with a conventional piezoactuator, a fast force-clamp with high accuracy and large working distances is reached. Simple feedback mechanisms and standard cantilever geometries lead to step response times of less than 90 micros, which is more than one order of magnitude faster than those of conventional force-clamp systems that are based only on piezo feedback. We demonstrate the fast and accurate performance of the setup by unfolding a protein construct consisting of one green fluorescent protein and eight surrounding immunoglobulin domains at constant force.

Optically monitoring the mechanical assembly of single molecules.

Bottom-up assembly at the level of individual molecules requires a combination of utmost spatial precision and efficient monitoring. We have previously shown how to 'cut-and-paste' single molecules, and other groups have demonstrated that it is possible to beat the diffraction limit in optical microscopy. Here we show that a combination of single-molecule cut-and-paste surface assembly, total internal reflection fluorescence microscopy and atomic force microscopy can be used to deposit individual fluorophores in well-defined nanoscale patterns and also to monitor the process in real time with nanometre precision. Although the size of the pattern is well below the optical resolution of the microscope, the individual dyes are identified by localizing the centroids and detecting the photobleaching of the fluorophores. With this combination of methods, individual dyes or labelled biomolecules can be arranged at will for specific functions, such as coupled fluorophore systems or tailored enzyme cascades, and monitored with nanoscale precision.

Nanoparticle self-assembly on a DNA-scaffold written by single-molecule cut-and-paste.

Self-assembly guided by molecular recognition has in the past been employed to assemble nanoparticle superstructures like hypercrystals or nanoparticle molecules. An alternative approach, the direct molecule-by-molecule assembly of nanoscale superstructures, was demonstrated recently. Here we present a hybrid approach where we first assemble a pattern of binding sites one-by-one at a surface and then allow different nanoparticles to attach by self-assembly. For this approach, biotin bearing DNA oligomers were picked up from a depot using a cDNA strand bound to an AFM tip. These units were deposited in the target area by hybridization, forming a recognition pattern on this surface. Fluorescent semiconductor nanoparticles conjugated with streptavidin were allowed to assemble on this scaffold and to form the final nanoparticle superstructures.