Prevention of Staphylococcus epidermidis biofilm formation using a low-temperature processed silver-doped phenyltriethoxysilane sol-gel coating.

Sol-gel coatings which elute bioactive silver ions are presented as a potential solution to the problem of biofilm formation on indwelling surfaces. There is evidence that high-temperature processing of such materials can lead to diffusion of silver away from the coating surface, reducing the amount of available silver. In this study, we report the biofilm inhibition of a Staphylococcus epidermidis biofilm using a low-temperature processed silver-doped phenyltriethoxysilane sol-gel coating. The incorporation of a silver salt into a sol-gel matrix resulted in an initial high release of silver in de-ionised water and physiological buffered saline (PBS), followed by a lower sustained release for at least 6 days-as determined by graphite furnace-atomic absorption spectroscopy (GF-AAS). The release of silver ions from the sol-gel coating reduced the adhesion and prevented formation of a S. epidermidis biofilm over a 10-day period. The presence of surface silver before and after 24 h immersion in PBS was confirmed by X-ray photoelectron spectroscopy (XPS). These silver-doped coatings also exhibited significant antibacterial activity against planktonic S. epidermidis. A simple test to visualise the antibacterial effect of silver release coatings on neighbouring bacterial cultures is also reported.

Enhancement of the antibacterial properties of silver nanoparticles using beta-cyclodextrin as a capping agent.

Silver nanoparticles (AgNPs) were synthesised by reducing silver salts using NaBH(4) followed by capping with varying concentrations of beta-cyclodextrin (beta-CD) and were physically characterised. Antibacterial activity against Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus was determined by a microtitre well method. The AgNPs were spherical under transmission electron microscopy, whilst dynamic light scattering showed average diameters of capped particles to be smaller (4-7 nm) than their uncapped equivalents (17 nm). Capped particles demonstrated superior photostability when exposed to intense ultraviolet radiation for 4h as well as significantly (P<0.05) higher (up to 3.5-fold) antibacterial activity. The influence of beta-CD concentration was seen to delay bacterial growth, indicating that a Trojan horse mechanism may be occurring owing to bacterial carbohydrate affinity, thereby enhancing silver ion absorption.

Dual-action hygienic coatings: benefits of hydrophobicity and silver ion release for protection of environmental and clinical surfaces.

Coatings that demonstrate reduced attachment of crystalline precipitates and the medical device colonising Staphylococcus epidermidis were prepared by the immobilisation of silver doped perfluoropolyether-urethane siloxane thin films on glass substrates. The presence of stratified hydrophobic perfluoropolyether groups protects the coating surface from the attachment of crystalline hydrophilic species such as chlorides and phosphates, whilst silver ion release inhibited attachment of S. epidermidis and subsequent biofilm formation in vitro. The release of silver ions protects the perfluoro groups from the hydrophobic interactions of S. epidermidis cells, which can reduce the hydrophobicity of the protective coating. These coatings also exhibited significant antibacterial activity against planktonic Acinetobacter baumannii and S. epidermidis bacterial strains. Detailed elemental and chemical surface analysis obtained using X-ray photoelectron spectroscopy (XPS) provided useful information on the effect of bacterial incubation on key indicator hydrophobic and hydrophilic functional groups. XPS analysis indicated preferential adsorption of S. epidermidis cells at the hydrophobic sites along the polymeric chain. These dual-action hygienic coatings can be employed to protect against contamination environmental surfaces and bacterial colonisation on implanted medical devices.

Silver doped perfluoropolyether-urethane coatings: antibacterial activity and surface analysis.

The colonisation of clinical and industrial surfaces with pathogenic microorganisms has prompted increased research into the development of effective antibacterial and antifouling coatings. There is evidence that implanted biomedical surfaces coated with metallic silver can be inactivated by physiological fluids, thus reducing the bioactivity of the coating. In this work, we report the biofilm inhibition of Staphylococcus epidermidis using a room temperature processed silver doped perfluoropolyether-urethane coating. The release of silver ions from these fluoropolymers over a six-day period inhibited bacterial encrustation - as observed by scanning electron microscopy (SEM). X-ray photoelectron spectroscopy (XPS) analysis indicated differences in carbon, fluorine and sodium surface composition between silver doped and undoped fluoropolymers after exposure to nutrient rich media. These silver doped perfluoropolyether coatings also exhibited antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA), Escherichia coli, Pseudomonas aeruginosa and Acinetobacter baumannii; suggesting potential use in preventing transmission of pathogenic and opportunistic microbes on environmental surfaces in healthcare facilities. The broad-spectrum antibacterial activity of these silver release coatings may be exploited on biomaterials surfaces to combat the development of resistant Gram-negative Enterobacteriaceae that can occur during prophylactic treatment for urinary tract infections.