High acidity organic waste degradation and the potential to bioremediation of heavy metals in soil by an acid-tolerant Serratia sp.

Highly acidic citrus pomace (CP) is a byproduct of Pericarpium Citri Reticulatae production and causes significant environmental damage. In this study, a newly isolated acid-tolerant strain of Serratia sp. JS-043 was used to treat CP and evaluate the effect of reduced acid citrus pomace (RACP) in passivating heavy metals. The results showed that biological treatment could remove 97.56% of citric acid in CP, the organic matter in the soil increased by 202.60% and the catalase activity in the soil increased from 0 to 0.117 U g-1. Adding RACP into soil can increase the stabilization of Cu, Zn, As, Co, and Pb. Specifically, through the metabolism of strain JS-043, RACP was also involved in the stabilization of Zn and Pb, and Residual Fraction in the total pool of these metals increased by 10.73% and 10.54%, respectively. Finally, the genome sequence of Serratia sp. JS-043 was completed, and the genetic basis of its acid-resistant and acid-reducing characteristics was preliminarily revealed. JS-043 also contains many genes encoding proteins associated with heavy metal ion tolerance and transport. These findings suggest that JS-043 may be a high-potential strain to improve the quality of acidic organic wastes that can then be useful for soil bioremediation.

Homology-dependent recombination of large synthetic pathways into E. coli genome via λ-Red and CRISPR/Cas9 dependent selection methodology.

BACKGROUND: Metabolic engineering frequently needs genomic integration of many heterologous genes for biosynthetic pathway assembly. Despite great progresses in genome editing for the model microorganism Escherichia coli, the integration of large pathway into genome for stabilized chemical production is still challenging compared with small DNA integration. RESULTS: We have developed a λ-Red assisted homology-dependent recombination for large synthetic pathway integration in E. coli. With this approach, we can integrate as large as 12 kb DNA module into the chromosome of E. coli W3110 in a single step. The efficiency of this method can reach 100%, thus markedly improve the integration efficiency and overcome the limitation of the integration size adopted the common method. Furthermore, the limiting step in the methylerythritol 4-phosphate (MEP) pathway and lycopene synthetic pathway were integrated into the W3110 genome using our system. Subsequently, the yields of the final strain were increased 106 and 4.4-fold compared to the initial strain and the reference strain, respectively. CONCLUSIONS: In addition to pre-existing method, our system presents an optional strategy for avoiding using plasmids and a valuable tool for large synthetic pathway assembly in E. coli.

Engineering a growth-phase-dependent biosynthetic pathway for carotenoid production in Saccharomyces cerevisiae.

Metabolic engineering is usually focused on static control of microbial cell factories to efficient production of interested chemicals, though heterologous pathways compete with endogenous metabolism. However, products like carotenoids may cause metabolic burden on engineering strains, thus limiting product yields and influencing strain growth. Herein, a growth-phase-dependent regulation was developed to settle this matter, and its efficiency was verified using the heterogenous biosynthesis of lycopene in Saccharomyces cerevisiae as an example. Through growth-phase-dependent control of the lycopene biosynthetic pathway, limited step in MVA pathway, and competitive squalene pathway, production yield was increased by approximately 973-fold (from 0.034- to 33.1-mg/g CDW) and 1.48 g/L of production was obtained by one-stage fermentation in a 5-L bioreactor. Our study not only introduces an economically approach to the production of carotenoids, but also provides an example of dynamic regulation of biosynthetic pathways for metabolic engineering.

Chitinophaga flava sp. nov., isolated from monsoon evergreen broad-leaved forest soil.

A Gram-stain-negative, aerobic, non-motile strain, K3CV102501T, was isolated from a soil sample collected from the monsoon evergreen broad-leaved forest of Dinghushan Biosphere Reserve located in Guangdong Province, PR China. The primal colony of strain K3CV102501T was very similar to the fruiting body of myxobacteria on the original isolation plates. Young cultures of strain K3CV102501T contained long (2-4×0.4-0.5 µm) filamentous cells and divided into rod shapes (0.7-1.0×0.6-0.8 µm) after 4 days of incubation at 28 °C. Strain K3CV102501T grew at pH 6.0-9.5 (optimum, pH 6.5-7.5) and 7-42 °C (optimum, 28-35 °C). Phylogenetic analysis based on its 16S rRNA gene sequence showed that strain K3CV102501T belonged to the genus Chitinophagaand showed the highest similarity to C.hitinophaga jiangningensis JCM 19354T (96.9 %). The DNA G+C content of the type strain was 46.6 mol%. The major fatty acids (>10 %) were iso-C15 : 0, C16 : 1ω5c and iso-C17 : 0 3-OH. The major polar lipids were phosphatidylethanolamine and an unidentified aminolipid. Menaquinone-7 was the predominant quinone. The phenotypic, chemotaxonomic and phylogenetic data clearly showed that strain K3CV102501T represents a novel species of the genus Chitinophaga, for which the name Chitinophaga flava sp. nov. is proposed. The type strain is K3CV102501T (=KCTC 62435T=GDMCC 1.1325T).

Efficient production of xylitol from hemicellulosic hydrolysate using engineered Escherichia coli.

A metabolically engineered Escherichia coli has been constructed for the production of xylitol, one of the top 12 platform chemicals from agricultural sources identified by the US Department of Energy. An optimal plasmid was constructed to express xylose reductase from Neurospora crassa with almost no inclusion bodies at relatively high temperature. The phosphoenolpyruvate-dependent glucose phosphotransferase system (ptsG) was disrupted to eliminate catabolite repression and allow simultaneous uptake of glucose and xylose. The native pathway for D-xylose catabolism in E. coli W3110 was blocked by deleting the xylose isomerase (xylA) and xylulose kinase (xylB) genes. The putative pathway for xylitol phosphorylation was also blocked by disrupting the phosphoenolpyruvate-dependent fructose phosphotransferase system (ptsF). The xylitol producing recombinant E. coli allowed production of 172.4 g L(-1) xylitol after 110 h of fed-batch cultivation with an average productivity of 1.57 g L(-1) h(-1). The molar yield of xylitol to glucose reached approximately 2.2 (mol xylitol mol(-1) glucose). Furthermore, the recombinant strain also produced about 150 g L(-1) xylitol from hemicellulosic sugars in modified M9 minimal medium and the overall productivity was 1.40 g L(-1) h(-1), representing the highest xylitol concentration and productivity reported to date from hemicellulosic sugars using bacteria. Thus, this engineered E. coli is a candidate for the development of efficient industrial-scale production of xylitol from hemicellulosic hydrolysate.

Global rewiring of lipid metabolism to produce carotenoid by deleting the transcription factor genes ino2/ino4 in Saccharomyces cerevisiae.

The transcription factor complex INO2 and INO4 in Saccharomyces cerevisiae plays a vital role in lipid biosynthesis by activating multiple genes in the biosynthetic pathways of phospholipid, fatty acid, and sterol. Previous studies have reported conflicting results regarding the effects of ino2 and ino4 gene expression levels on target chemicals. Therefore, this study aimed to examine the influence of different ino2 and ino4 expression levels on carotenoid production (e.g., lycopene), which shares a common precursor, acetyl-CoA, with lipid metabolism. Surprisingly, 2.6- and 1.8-fold increase in lycopene yield in the ino2 and ino4 deletion strains were found, respectively. In contrast, ino2 overexpression did not promote lycopene accumulation. Additionally, there was a decrease in intracellular free fatty acids in the ino2 deletion strain. Comparative transcriptome analysis revealed a significant downregulation of genes related to lipid biosynthesis in the ino2 deletion strain. To our knowledge, this is the first report showing that deletion of transcription factor genes ino2 and ino4 can facilitate lycopene accumulation. These findings hold significant implications for the development of metabolically engineered S. cerevisiae with enhanced carotenoid production.

Design of a dual-responding genetic circuit for high-throughput identification of L-threonine-overproducing Escherichia coli.

L-threonine is a crucial amino acid that is extensively employed in the realms of food, animal feed and pharmaceuticals. Unfortunately, the lack of an appropriate biosensor has hindered the establishment of a robust high-throughput screening (HTS) system for the identification of the desired strains from random mutants. In this study, a dual-responding genetic circuit that capitalizes on the L-threonine inducer-like effect, the L-threonine riboswitch, and a signal amplification system was designed for the purpose of screening L-threonine overproducers. This platform effectively enhanced the performance of the enzyme and facilitated the identification of high L-threonine-producing strains from a random mutant library. Consequently, pathway optimization and directed evolution of the key enzyme enhanced L-threonine production by 4 and 7-fold, respectively. These results demonstrate the potential of biosensor design for dynamic metabolite detection and offer a promising tool for HTS and metabolic regulation for the development of L-threonine-hyperproducing strains.

Metabolic engineering strategies for improving xylitol production from hemicellulosic sugars.

Xylitol is a five-carbon sugar alcohol with potential for use as a sweetener. Industrially, xylitol is currently produced by chemical hydrogenation of D-xylose using Raney nickel catalysts and this requires expensive separation and purification steps as well as high pressure and temperature that lead to environmental pollution. Highly efficient biotechnological production of xylitol using microorganisms is gaining more attention and has been proposed as an alternative process. Although the biotechnological method has not yet surpassed the advantages of chemical reduction in terms of yield and cost, various strategies offer promise for the biotechnological production of xylitol. In this review, the focus is on the most recent developments of the main metabolic engineering strategies for improving the production of xylitol.

Advances in the Discovery and Engineering of Gene Targets for Carotenoid Biosynthesis in Recombinant Strains.

Carotenoids are naturally occurring pigments that are abundant in the natural world. Due to their excellent antioxidant attributes, carotenoids are widely utilized in various industries, including the food, pharmaceutical, cosmetic industries, and others. Plants, algae, and microorganisms are presently the main sources for acquiring natural carotenoids. However, due to the swift progress in metabolic engineering and synthetic biology, along with the continuous and thorough investigation of carotenoid biosynthetic pathways, recombinant strains have emerged as promising candidates to produce carotenoids. The identification and manipulation of gene targets that influence the accumulation of the desired products is a crucial challenge in the construction and metabolic regulation of recombinant strains. In this review, we provide an overview of the carotenoid biosynthetic pathway, followed by a summary of the methodologies employed in the discovery of gene targets associated with carotenoid production. Furthermore, we focus on discussing the gene targets that have shown potential to enhance carotenoid production. To facilitate future research, we categorize these gene targets based on their capacity to attain elevated levels of carotenoid production.

Upstream Activation Sequence Can Function as an Insulator for Chromosomal Regulation of Heterologous Pathways Against Position Effects in Saccharomyces cerevisiae.

Metabolic engineering of microbial cell factories through integrating the heterologous synthetic pathway into the chromosome is most commonly used for industrial applications. However, the position of the foreign gene in the chromosome can affect its transcriptional level. As a microorganism that is generally regarded as safe (GRAS) and commonly applied in industrial manufacture with large-scale operations, Saccharomyces cerevisiae is also confronted with this position effect. In this study, we characterized 12 different chromosome sites by inserting the lycopene biosynthetic pathway as a reporter cassette. Due to the different integration loci, the gene transcription and lycopene yield exhibited more than 58-fold and 3.8-fold differences, respectively. Furthermore, changing the gene order also revealed a remarkable influence (30-fold and 14-fold) on gene transcription and lycopene yield. Besides, the upstream activation sequence of a strong promoter (defined as an insulator) in S. cerevisiae could reduce the impact by gene order, and increased the gene transcription (tenfold) and lycopene yield (sevenfold). Taken together, our results demonstrated that gene order and insulator affected gene transcription and heterogeneous biosynthesis, opening the opportunity to regulate gene transcription by insulator against position effect in S. cerevisiae.

Engineering a Balanced Acetyl Coenzyme A Metabolism in Saccharomyces cerevisiae for Lycopene Production through Rational and Evolutionary Engineering.

Saccharomyces cerevisiae is increasingly being used for the production of chemicals derived from acetyl coenzyme A (acetyl-CoA). However, the inadequate supply of cytosolic acetyl-CoA often leads to low yields. Here, we developed a novel strategy for balancing acetyl-CoA metabolism and increasing the amount of the downstream product. First, the combination of acetaldehyde dehydrogenase (eutE) and acetoacetyl-CoA thiolase (AtoB) was optimized to redirect the acetyl-CoA flux toward the target pathway, with a 21-fold improvement in mevalonic acid production. Second, pathway engineering and evolutionary engineering were conducted to attenuate the growth deficiency, and a 10-fold improvement of the maximum productivity was achieved. Third, acetyl-CoA carboxylase (ACC1) was dynamically downregulated as the complementary acetyl-CoA pathway, and the yield was improved more than twofold. Fourth, the most efficient and complementary acetyl-CoA pathways were combined, and the final strain produced 68 mg/g CDW lycopene, which was among the highest yields reported in S. cerevisiae. This study demonstrates a new method of producing lycopene products by regulating acetyl-CoA metabolism.

Transcriptome Analysis Reveals a Promotion of Carotenoid Production by Copper Ions in Recombinant Saccharomyces cerevisiae.

We previously constructed a Saccharomyces cerevisiae carotenoid producer BL03-D-4 which produced much more carotenoid in YPM (modified YPD) media than YPD media. In this study, the impacts of nutritional components on carotenoid accumulation of BL03-D-4 were investigated. When using YPM media, the carotenoid yield was increased 10-fold compared to using the YPD media. To elucidate the hidden mechanism, a transcriptome analysis was performed and showed that 464 genes changed significantly in YPM media. Furthermore, inspired by the differential gene expression analysis which indicated that ADY2, HES1, and CUP1 showed the most remarkable changes, we found that the improvement of carotenoid accumulation in YPM media was mainly due to the copper ions, since supplementation of 0.08 mM CuSO4 in YPD media could increase carotenoid yield 9.2-fold. Reverse engineering of target genes was performed and carotenoid yield could be increased 6.4-fold in YPD media through overexpression of ACE1. The present study revealed for the first time the prominent promotion of carotenoid yield by copper ions in engineered S. cerevisiae and provided a new target ACE1 for genetic engineering of S. cerevisiae for the bioproduction of carotenoids.

Identification of a novel metabolic engineering target for carotenoid production in Saccharomyces cerevisiae via ethanol-induced adaptive laboratory evolution.

Carotenoids are a large family of health-beneficial compounds that have been widely used in the food and nutraceutical industries. There have been extensive studies to engineer Saccharomyces cerevisiae for the production of carotenoids, which already gained high level. However, it was difficult to discover new targets that were relevant to the accumulation of carotenoids. Herein, a new, ethanol-induced adaptive laboratory evolution was applied to boost carotenoid accumulation in a carotenoid producer BL03-D-4, subsequently, an evolved strain M3 was obtained with a 5.1-fold increase in carotenoid yield. Through whole-genome resequencing and reverse engineering, loss-of-function mutation of phosphofructokinase 1 (PFK1) was revealed as the major cause of increased carotenoid yield. Transcriptome analysis was conducted to reveal the potential mechanisms for improved yield, and strengthening of gluconeogenesis and downregulation of cell wall-related genes were observed in M3. This study provided a classic case where the appropriate selective pressure could be employed to improve carotenoid yield using adaptive evolution and elucidated the causal mutation of evolved strain.

Metabolic Engineering of Saccharomyces cerevisiae for Enhanced Carotenoid Production From Xylose-Glucose Mixtures.

Co-utilization of xylose and glucose from lignocellulosic biomass is an economically feasible bioprocess for chemical production. Many strategies have been implemented for efficiently assimilating xylose which is one of the predominant sugars of lignocellulosic biomass. However, there were few reports about engineering Saccharomyces cerevisiae for carotenoid production from xylose-glucose mixtures. Herein, we developed a platform for facilitating carotenoid production in S. cerevisiae by fermentation of xylose-glucose mixtures. Firstly, a xylose assimilation pathway with mutant xylose reductase (XYL1m), xylitol dehydrogenase (XYL2), and xylulokinase (XK) was constructed for utilizing xylose. Then, introduction of phosphoketolase (PK) pathway, deletion of Pho13 and engineering yeast hexose transporter Gal2 were conducted to improve carotenoid yields. The final strain SC105 produced a 1.6-fold higher production from mixed sugars than that from glucose in flask culture. In fed-batch fermentation with continuous feeding of mixed sugars, carotenoid production represented a 2.6-fold higher. To the best of our knowledge, this is the first report that S. cerevisiae was engineered to utilize xylose-glucose mixtures for carotenoid production with a considerable high yield. The present study exhibits a promising advantage of xylose-glucose mixtures assimilating strain as an industrial carotenoid producer from lignocellulosic biomass.

Construction of plasmid-free Escherichia coli for the production of arabitol-free xylitol from corncob hemicellulosic hydrolysate.

High costs and low production efficiency are a serious constraint to bio-based xylitol production. For industrial-scale production of xylitol, a plasmid-free Escherichia coli for arabitol-free xylitol production from corncob hemicellulosic hydrolysate has been constructed. Instead of being plasmid and inducer dependent, this strain relied on multiple-copy integration of xylose reductase (XR) genes into the chromosome, where their expression was controlled by the constitutive promoter P43. In addition, to minimize the flux from L-arabinose to arabitol, two strategies including low XR total activity and high selectivity of XR has been adopted. Arabitol was significantly decreased using plasmid-free strain which had lower XR total activity and an eight point-mutations of XR with a 27-fold lower enzyme activity toward L-arabinose was achieved. The plasmid-free strain in conjunction with this mutant XR can completely eliminate arabitol formation in xylitol production. In fed-batch fermentation, this plasmid-free strain produced 143.8 g L(-1) xylitol at 1.84 g L(-1) h(-1) from corncob hemicellulosic hydrolysate. From these results, we conclude that this route by plasmid-free E. coli has potential to become a commercially viable process for xylitol production.

Antioxidant and antimicrobial properties of various solvent extracts from Impatiens balsamina L. stems.

UNLABELLED: The antioxidant and antimicrobial activities as well as the quantity of phenolic substances of Impatiens balsamina L. stem extracts obtained with various solvent were determined in this study. All of the extracts possessed moderate antioxidant potential in the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging and reducing power assays. Antimicrobial activity was estimated using the cylinder-plate and agar dilution methods against four bacterial and six fungal strains. The extracts showed good antimicrobial activity especially antifungal activity against all of the tested microorganisms. The total phenolic and flavonoid contents ranged from 2.88 to 13.63 mg gallic acid equivalents/g dried extract and 0.98 to 7.87 mg quercetin equivalents/g dried extract, respectively. The results presented here indicate that the I. balsamina stem extracts have antioxidant and antimicrobial properties and are therefore a potential source of antioxidant and antimicrobial agents for the food and pharmaceutical industries. PRACTICAL APPLICATION: Our work indicates that the I. balsamina stem may be a good candidate as natural antioxidant and antimicrobial agents. It can be applied in food industry for preservation.