Comparison of treatment effects during en-masse retraction of upper anterior teeth placed using mini-implants placed at infrazygomatic crest and interradicular sites: A randomized controlled trial.

INTRODUCTION: The objective of this prospective study was to examine the efficacy of posterior interradicular and infrazygomatic crest mini-implants for en-masse anterior retraction. METHODS: The 22 patients were divided into two groups. In group 1 (IZC n = 11), mini-implants were placed in the infrazygomatic crests and in group 2 (IR, n = 11), mini-implants were placed in the molar-premolar interradicular sites. Soft tissue, skeletal, and dental treatment effects between two groups were compared using lateral cephalometric measurements. RESULTS: The average angle between the cranial base and A point was 1.01 degrees (P = .004), and the linear distance between the upper incisor and A point was 2.67 to 5.2 millimetres (P = .00). In IZC group the maxillary incisor to the palatal plane moved upward by a mean of -5.20 mm (P = .059), whereas in IR group the incisor movement changed by -2.67 mm (P = .068). There was no significant difference between groups IZC and IR while comparing overall treatment changes on upper incisor position change, angle, and overjet. CONCLUSIONS: Mini-implants placed in between the molar and premolar as well as the infrazygomatic crest can withstand the deepening of the bite during retraction. Mini-implants in IZC are capable of causing intrusion of the anterior teeth and preventing intrusion of the molars, thereby providing absolute anchoring in all planes. Placement of the mini-implants in the infrazygomatic crest resulted in more linear retraction.

Assessment of Toxicity of Green Synthesized Silver Nanoparticle-coated Titanium Mini-implants with Uncoated Mini-implants: Comparison in an Animal Model Study.

AIM: To assess the potential for systemic toxicity when silver nanoparticle-coated mini-implants were implanted in Wistar albino rats conducted as a comparative study in the animal model by assessing the blood biochemistry, liver and kidney function, and histology of the implanted site. MATERIALS AND METHODS: The surface of the mini-implant was coated with a green-mediated silver nanoparticle. Uncoated mini-implants were placed in two groups of eight Wistar albino rats, and silver nanoparticle-coated mini-implants were placed in another eight rats. The bone's general conditions, blood biochemistry assessing for ALT, AST, GPT, GOT, and histological sections using H and E stain and Masson's Trichrome stain were examined at 7, 14, and 28-day intervals. RESULTS: The creatinine, urea, ALP, and ALT showed no signs of systemic toxicity during the 28-day follow-up period in the Wistar rats both in the test and control groups. The histological evaluation, which was conducted using HE and MTS stain, revealed osteogenesis and adequate healing of the insertion site in the group where coated mini-implant was placed. The bone sample revealed no abnormalities in the control group with uncoated mini-implants. CONCLUSION: Green synthesized silver nanoparticle-coated mini-implant does not cause systemic toxicity as indicated by no abnormalities in the levels of creatinine, urea, ALT, ALP, GPT, and GOT. The bone histology indicates that the coated mini-implants placed in animal bone healed with adequate osteogenesis. CLINICAL SIGNIFICANCE: Silver nanoparticles have potential for antimicrobial activity. Mini-implants placed as temporary anchorage devices in orthodontics often fail due to inflammation and plaque. Silver nanoparticle-coated mini-implants would reduce the risk of mini-implant failure as it would have antimicrobial potential and eliminate this cause for failure of mini-implants. How to cite this article: Sreenivasagan S, Subramanian AK, Mohanraj KG, et al. Assessment of Toxicity of Green Synthesized Silver Nanoparticle-coated Titanium Mini-implants with Uncoated Mini-implants: Comparison in an Animal Model Study. J Contemp Dent Pract 2023;24(12):944-950.

Comparative Assessment of pH and Degree of Surface Roughness of Enamel When Etched with Five Commercially Available Etchants: An In Vitro Study.

AIM: To evaluate the pH and degree of surface roughness caused by five commercially and readily available etchants on tooth enamel. MATERIALS AND METHODS: Five different etchants were chosen. An electric pH meter was utilized to test the pH of the etchants employed. Fifteen maxillary bicuspids that had been extracted were cleansed and stored in thymol solution. The samples were sorted into five groups of three each. A noncontact profilometer was employed to assess the microsurface changes of the pre-etched enamel. The teeth were then etched for 30 seconds with respect to the group to which they belonged before being cleaned and dried. The surface roughness after etching was analyzed, measured and values were tabulated. Descriptive statistics and paired t-test were done. RESULTS: The pH of the etchants and surface roughness of the enamel are varied across the five groups, though they have the same composition of 37% orthophosphoric acid. Etchant from Group C was found to be most acidic while the one manufactured by Group E was least acidic. Ivoclar, DPI, and DTECH showed a statistically significant value in surface roughness parameter post-etching (p <0.05). A statistical difference that was significant was observed with the Kruskal-Wallis test for surface roughness parameter (p <0.05). CONCLUSION: All five etchants had varied pH and the amount of surface roughness was also varied though the composition was the same. Further elemental analysis of these etchants has to be done to validate the results obtained. CLINICAL SIGNIFICANCE: Etchants of the same composition should ideally produce the same effect on the tooth enamel surface, but etchants from different manufacturers produce different levels of surface roughness which could be due to differences in the composition of the prepared etchant. The study was conducted to assist in making an educated selection about the most cost-effective but efficient etchant for clinical application.

Assessment of Insertion Torque of Mini-implant and Its Correlation with Primary Stability and Pain Levels in Orthodontic Patients.

AIM: The aim of this study was to assess the insertion torque of the mini-implant used in orthodontic patients and to assess the correlation between the insertion torque, primary stability, and perception of pain in patients undergoing orthodontic therapy with mini-implant-augmented anchorage. MATERIAL AND METHODS: Among the patients undergoing orthodontic therapy, 31 samples who required mini-implant for anchorage purpose were selected. A total of 59 mini-implants were placed in these patients. This included interradicular mini-implants and extra-alveolar mini-screws. Immediately after placement, the insertion torque in all these was measured using a digital torque meter and primary stability was assessed by identifying any mobility of the implant placed. Primary stability was noted at two time intervals immediate post-placement and 1 week after that. All the mini-implants that were considered in this study were immediately loaded. Patients were asked to record any pain experienced on the visual analog scale (VAS) score sheet at 24 hours and 1 week post-placement. RESULTS: Among the mini-implants placed, those with 2 mm diameter needed higher placement torque, i.e., infrazygomatic crest mini-implants and buccal shelf mini-implants were placed with average placement torque of 10.08 and 10.25 N cm, respectively. Extra-alveolar screws caused more pain, especially higher in the mandible than the maxilla. Decrease in pain scores was noted from T0 to T1 in almost all the cases. CONCLUSION: Thicker mini-implant needed more insertion torque and highest insertion torque was recorded with extra-alveolar screws. No direct correlation could be obtained with the pain levels experienced by the patients and with the primary stability of the mini-implants. CLINICAL SIGNIFICANCE: Mini-implants placed with an insertion torque above the recommended range tend to fail and break more often. Patients placed with extra-alveolar bone screws reported more pain than that of the smaller-dimension mini-implant.

Remineralization potential of varying concentrations of two plant-based extracts of Cocos nucifera on white spot lesions using SEM and EDAX analysis: An in vitro study.

Aim: To evaluate the remineralization potential of varying concentrations of two plant-based extracts of Cocos nucifera on white spot lesions using SEM and EDAX in vitro testing methods. Materials and Methods: The pulp was freshly obtained from coconut and divided into two. Then, coconut milk was obtained by blending, while the next portion was freeze-dried and lyophilized. Third molar teeth were processed into tooth slabs (N = 40) and split equally into five groups by block randomization. After demineralization, one tooth slab was taken from each, and SEM analysis was done. Remineralization was then performed among the various groups that included Group 1, which acted as a control and consisted of the remineralization solution. Groups 2 and 3 comprised 1:1 and 2:1 concentrations of the coconut milk, whereas Groups 4 and 5 consisted of 1:1 and 2:1 concentrations of the lyophilized extract. SEM and EDAX testing were done post-remineralization. Ca and phosphate values were tabulated, and statistical significance was determined for the obtained values using ANOVA. Results: Among the control and treatment groups, surface remineralization was better observed in 1:1 coconut milk and 2:1 coconut milk than in the 2:1 lyophilized coconut, control, and 1:1 lyophilized coconut. Between the control and treatment groups, Ca and phosphate percentages (P < 0.001) showed statistical differences. The lowest value of 2.3% was noted in the 2:1 lyophilized coconut group. Conclusion: Coconut extracts exhibit remineralization potential on the artificial carious lesion. Coconut milk exhibited significant improvement in the surface properties than lyophilized coconut.

Enamel Remineralization Efficacy of Coconut Milk and Lyophilized Coconut Extract in Different Concentrations on Demineralized Enamel Surfaces: An In-Vitro Study.

Aim The current study's objective is to determine the remineralizing efficacy of freeze-dried lyophilized coconut extract and coconut milk made from freshly grated coconut on artificial carious lesions produced by pH cycling. Materials and methods Freshly extracted coconut pulp was split into two parts. The first half was blended to obtain coconut milk, and the second part was freeze-dried and lyophilized. Tooth slabs were prepared from extracted third molar teeth. After being demineralized for 72 hours, the tooth samples were remineralized by submerging them in the appropriate remineralizing solution, which is as follows: Group 1 received 25 mL of the Remineralization solution (the control); Group 2 received 2.5 g of coconut milk and 25 mL of the solution (1:1); and Group 3 received 5 g of coconut milk and 25 mL of the solution (2:1). 2.5 g of freeze-dried, lyophilized coconut extract was given to Group 4 along with 25 mL of remineralization solution (1:1), and 5 g of freeze-dried, lyophilized coconut extract was given to Group 5 along with 25 mL of remineralization solution (2:1). Microhardness and contact angle measurements were made. An Excel spreadsheet was filled up with values from after demineralization, and after remineralization. A statistical analysis was performed using SPSS 26.0 (IBM Corp., Armonk, NY). Using descriptive statistics, the pretreatment mean values for the microhardness and contact angle of the various groups were evaluated. Post-hoc Tukey tests were utilized to compare the analytic results of the various groups. Results Among the various concentrations of freshly extracted coconut milk, the contact angle in concentrations of 1:1 was 81.22 ± 1.62 deg, and that in concentrations of 2:1 was 88.01 ± 1.85 deg. Between the two concentrations of the lyophilized coconut extract group, the contact angle in 1:1 was 75.05 ± 2.29 deg, and in 2:1 was 71.37 ± 0.85 deg. In the coconut milk group, the value of microhardness was 261 ± 6.4 kg/cm2 at a lower concentration and 322 ± 3.9 kg/cm2 at a higher concentration. In the lyophilized coconut group, the lower concentration exhibited a microhardness of 211 ± 7.2 kg/cm2, whereas in the higher concentration, it was 324 ± 4.04 kg/cm2. Conclusion Of the various concentrations of coconut milk and lyophilized coconut used, coconut milk at a higher concentration exhibits the highest contact angle, and the latter at a higher concentration exhibits the lowest contact angle. In both groups, high concentrations of the material exhibited high microhardness values compared to lower concentrations of the same.

Cephalometric Analysis in Orthodontics Using Artificial Intelligence-A Comprehensive Review.

Artificial intelligence (AI) is a branch of science concerned with developing programs and computers that can gather data, reason about it, and then translate it into intelligent actions. AI is a broad area that includes reasoning, typical linguistic dispensation, machine learning, and planning. In the area of medicine and dentistry, machine learning is currently the most widely used AI application. This narrative review is aimed at giving an outline of cephalometric analysis in orthodontics using AI. Latest algorithms are developing rapidly, and computational resources are increasing, resulting in increased efficiency, accuracy, and reliability. Current techniques for completely automatic identification of cephalometric landmarks have considerably improved efficiency and growth prospects for their regular use. The primary considerations for effective orthodontic treatment are an accurate diagnosis, exceptional treatment planning, and good prognosis estimation. The main objective of the AI technique is to make dentists' work more precise and accurate. AI is increasingly being used in the area of orthodontic treatment. It has been evidenced to be a time-saving and reliable tool in many ways. AI is a promising tool for facilitating cephalometric tracing in routine clinical practice and analyzing large databases for research purposes.

In vitro anti-inflammatory activity of silymarin/hydroxyapatite/chitosan nanocomposites and its cytotoxic effect using brine shrimp lethality assay.

Silymarin, a bioactive compound, is one of the most prominent drugs used in liver diseases. Chitosan and hydroxyapatite (HAP) are the major materials used employed in many biomedical processes like drug delivery, osteointegration, etc. The nanoparticles and nanocomposites are advanced materials with many biomedical applications in diagnosis and therapeutics. In this study, HAP and chitosan were used as a polymeric material, silymarin as a bioactive compound, and other nanoparticle based combinations. The prepared individual materials and nanocomposites were used for the anti-inflammatory activity and brine shrimp lethality assay. The results clearly show that the nanocomposites are good anti-inflammatory agents with lower toxicity.

Prevalence and Cause of Mini-Implant Failure Encountered by Orthodontic Residents.

This study was designed to increase understanding of mini-implants as well as causes of mini-implant complications and failure in orthodontic patients. Orthodontic case sheets were evaluated to identify retraction in mini-implant cases. Samples were taken and tabulated to determine causes and sites of mini-implant failure. The overall success rate of mini-implants over a period of 3 months postplacement follow-up was 83.5%, indicating that screw implants can be used for orthodontic anchorage. To minimize failure, clinicians should attempt to reduce inflammation around screw implants.

Assessment of Wettability and Contact Angle of Bonding Agent with Enamel Surface Etched by Five Commercially Available Etchants: An In Vitro Study.

BACKGROUND: The quantity and quality of the etching pattern produced by acids play a significant role in the wettability and contact angle of the adhesive with the enamel surface in orthodontics. The better the etch pattern, the more the surface energy of the enamel, better the penetration of the adhesive, which ultimately results in better bond strength. The present study aimed to evaluate the contact angle of the bonding agent with the enamel surface etched by five commercially available etchants and check if any difference existed between the five. MATERIALS AND METHODS: Twenty-five human maxillary and mandibular central incisors and premolars extracted for orthodontic or dental purposes were used in this study as samples. The teeth were allocated into five groups based upon the etchant used to etch the enamel surface. After the samples were etched, a hard tissue microtome was used to create thin slices of the enamel surface. The samples were then exposed to bonding agent Ormco Enlight. The bonding agent was released in the form of droplets onto the enamel slices mounted on a contact angle goniometer. The contact angle values were tabulated, and statistical analysis using the one-way ANOVA test was carried out. RESULTS: The contact angle measurements of the etchant group, DPI, were the lowest, while D-tech has the highest contact angle values. However, statistical analysis revealed no statistically significant difference between the contact angle measurements of the five groups included in the study. CONCLUSION: No statistically significant difference existed between the five etchant groups included in the study. However, commercially available etchant DPI showed lesser contact angle and thus better wettability in comparison to other groups. Further elemental analysis and surface analysis are required to validate these results.

Pain Perception Associated with Mini-Implants and Interventions for Pain Management: A Cross-Sectional Questionnaire-Based Survey.

BACKGROUND: Orthodontists use mini-implants temporarily as an effective mode of skeletal anchorage devices. The placement of mini-implants can cause pain and discomfort to the patients. Patients often develop swelling, and the pain could interfere with their daily activities. Practitioners tend to prescribe antibiotics and pain medication for management. OBJECTIVES: The main objectives of this study are to evaluate the pain perception and discomfort due to mini-implant placement experienced by the patient and evaluate the interventions for pain management commonly practiced among orthodontists. MATERIALS AND METHODS: The study was designed as a questionnaire-based cross-sectional study. A total of 271 patients were assessed, for whom 625 mini-implants (ranging from 1.2 to 2 mm diameter and length 8-14 mm) were placed. Pain scores were assessed using the VAS and the "Faces" pain rating scale to collect data about discomfort in daily activity and function. Data was collected from 244 patients. A total of 155 orthodontists were questioned regarding the prescription of medications and the interventions for managing pain and adverse effects. RESULTS: Average pain score among female subjects was 16.71 and among men was 13.5. The highest pain scores were recorded for palatal mini-implants with an average score of 36.29 and the least for interradicular mini-implants with an average score of 9.02. Among the subjects, 47.9% of them took analgesics, and the most commonly prescribed analgesics were paracetamol (39%). Swelling at the site is where the mini-implants were placed, and ulceration due to implants were commonly dealt with the excision of the surrounding soft tissue, composite placement, and palliative care with oral analgesic gels. CONCLUSION: Female subjects had more mini-implants placed, and female subjects had also given more pain scores than their male counterparts. Palatal mini-implants caused the highest pain, followed by mini-implants placed at the infrazygomatic crest and the buccal shelf region. Palatal mini-implants caused maximum discomfort during speech and eating, followed by the mini-implant in the buccal shelf and the infrazygomatic crest region that also caused difficulty in yawning and laughing. Infiltration anesthesia was commonly given for the placement of interradicular implants and extra-alveolar mini-implants. Paracetamol was the most prescribed by the orthodontists, and more than half the doctors did not regularly prescribe antibiotics.

The Exponential Rise of Teledentistry and Patient-Oriented Protective Measures in Southeast Asian Dental Clinics: Concerns, Benefits, and Challenges.

In the Southeast Asian region, various policies have been advocated by health regulatory bodies that entail protective measures such as face masks, gloves, maintaining distance in public areas, and more. These protective measures are aimed at helping reverse the growth rate of the coronavirus. Dentists in this region have incorporated several changes to their practices to help minimize risks of person-to-person transmission inside dental offices. This narrative review aimed to provide an in-depth overview of the current situation in the Southeast Asian region regarding the use of teledentistry during the pandemic. Teledentistry involves the transfer of patient information across remote distances for online consultation and treatment planning. A few years back, it used to be a lesser-known entity but has seen an exponential rise in its incorporation into dental practices all around the Association of Southeast Nations (ASEAN) region. Many clinics in the Southeast Asian region have started using online consultations to ensure that patients can be diagnosed or followed up during their treatment. Teledentistry is the clear answer in the coming months as it will help reduce the risk of virus transmission and help patients get access to oral healthcare and dentists to see their patients. This article reviews the current pandemic situation in the ASEAN region, the recent evidence, and the scope of teledentistry. It also provides recommendations for the future and sheds light on the different types of teledentistry and how it can be incorporated into practices by regulatory authorities in this region.

Comparative evaluation of canal transportation, centering ability, and dentin removal between ProTaper Gold, One Curve, and Profit S3: An in vitro study.

AIM: The aim of the study was to compare the canal transportation, centering ability, and dentin removal of Profit S3 (PS3), One Curve (OC), and ProTaper Gold (PTG) systems using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Thirty extracted human single-rooted premolars were used in the present study. Preinstrumentation scanning of all the teeth in arch form was taken using CBCT. To increase standardization, crowns were removed and only teeth measuring 16 mm were included in the study. The samples were randomly divided into three groups, with ten samples in each group; Group I was instrumented with PS3, Group II was instrumented with OC, and Group III - PTG. Postinstrumentation scans were performed, and the two scans were compared to determine canal transportation, centering ability, and dentin removal at 3, 6, and 9 mm, from the apex. STATISTICAL ANALYSIS: One-way-ANOVA and the independent t-test were done for the pairwise comparison. The significance level was set at P = 0.05; statistical analysis was performed with SPSS statistics version 20.0 (SPSS Inc., Chicago, IL, USA). RESULTS: The mean canal centering ratio and canal apical transportation for PS3, OC and PTG show no statistical difference (P > 0.05). The mean value of dentin removal showed a statistically significant difference between the three groups (P < 0.05). PS3 and OC rotary file showed less removal of dentin compared to PTG (P < 0.00). CONCLUSION: It was evident that PS3, OC, and PTG had no statistically significant difference when analyzed based on canal transportation and canal centering ratio. However, there was a significant difference among the three groups comparing the removal of dentin. PS3 and OC rotary file showed less removal of dentin compared to PTG.

Biomedical waste management practice in dentistry.

Biomedical Waste Management practice in Dentistry is an important issue. Therefore, it is of interest to document awareness on such issues among clinical practitioners, academicians and students. A survey was completed using a questionnaire from 355 dentists consisting of 201 students, 39 academicians and 115 clinicians in India. Analysis of the survey data shows that majority of students, practitioners, and academicians are aware of laws binding with such issues. However, the Biomedical Waste Management practice among them is not satisfactory. Therefore, education on such issues among clinical practitioners, academicians and students is critical in this part of the globe.

Concerns with oral health care services for adults with cognitive and intellectual disabilities.

It is of interest to document data on oral health care services for adults with cognitive and intellectual disabilities. Hence, a study protocol was registered at the International Prospective Register of Systematic Reviews (PROSPERO) with registration number: CRD42020150759. We used PubMed, Science Direct, LILACS and SCIELO to collect data from known literature using keywords containing MESH (Medical Subject Headings) terms. The risk of bias rating for the collected data was calculated using the Newcastle-Ottawa assessment Scale. The AHRQ (Agency for Healthcare, Research and Quality) was used for classifying the level of evidence in the collected data. Analysis of available data shows that there is a lack of dentists with adequate skills to treat people with disabilities resulting in high cost for dental treatment. Thus, we conclude that inconvenient location of dental clinic, lack of dentists willing to treat people with disabilities and attitude of dental staff towards people with learning disabilities were considered as barriers and challenges faced for dental health service utilization in this context.