Recent Advances in Tetra- (Ti, Sn, Zr, Hf) and Pentavalent (Nb, V, Ta) Metal-Substituted Molecular Sieve Catalysis.

Metal substitution of molecular sieve systems is a major driving force in developing novel catalytic processes to meet current demands of green chemistry concepts and to achieve sustainability in the chemical industry and in other aspects of our everyday life. The advantages of metal-substituted molecular sieves include high surface areas, molecular sieving effects, confinement effects, and active site and morphology variability and stability. The present review aims to comprehensively and critically assess recent advances in the area of tetra- (Ti, Sn, Zr, Hf) and pentavalent (V, Nb, Ta) metal-substituted molecular sieves, which are mainly characterized for their Lewis acidic active sites. Metal oxide molecular sieve materials with properties similar to those of zeolites and siliceous molecular sieve systems are also discussed, in addition to relevant studies on metal-organic frameworks (MOFs) and some composite MOF systems. In particular, this review focuses on (i) synthesis aspects determining active site accessibility and local environment; (ii) advances in active site characterization and, importantly, quantification; (iii) selective redox and isomerization reaction applications; and (iv) photoelectrocatalytic applications.

Arsenate Anion-π Interactions on Amine-Modified Polydivinylbenzene in Aqueous Systems: Experimental and Theoretical Investigation.

Anion-π interactions aiding in the adsorption of anions in the solution phase, though challenging to quantify, have attracted a lot of attention in supramolecular chemistry. We present the design of a polymer adsorbent that quantifies the adsorption of arsenate ions experimentally by optimizing anion-π interactions in a purely aqueous system and use density functional theory to compare these results with theoretical data. Arsenate anions are removed from water by amine-functionalized polydivinylbenzene using the comonomer 1-vinyl-1,2,4-triazole, which was cross-linked with divinylbenzene via radical polymerization in a hydrothermal procedure. The amine-functionalized polydivinylbenzene successfully removed arsenate anions from water with a capacity of 46 mg g-1, a 70% increase compared to the nonfunctionalized polydivinylbenzene (27 mg g-1) capacity under the same conditions. Adsorption is best described by the Sips isotherm model with a correlation coefficient R2 factor of 0.99, indicating that adsorption sites are homogeneous, and adsorption occurred by forming a monolayer. Kinetic studies indicated that adsorption is second order in the amine-functionalized polydivinylbenzene. Computational studies using density functional theory showed that the 1-vinyl-1,2,4-triazole comonomer improved the thermodynamic stability of the anionic-π interactions of polydivinylbenzene with arsenate anions. Electrostatic interactions dominate the mechanism of adsorption in polydivinylbenzene compared to the anion-induced interactions that dominate adsorption in amine-functionalized polydivinylbenzene.

Multiple interface coupling on natural tourmaline enables high-efficiency removal of antibiotic: Superior property and mechanism.

Reasonably designing highly active, environmentally friendly, and cost-effective catalysts for efficient elimination of pollutants from water is desirable but challenging. Herein, an efficient heterogeneous photo-Fenton catalyst tourmaline (TM)/tungsten oxide (WO3-x) (named TW10) containing tungsten/boron/iron (W/B/Fe) synergistic active centers and 90% of cheap natural tourmaline (TM) mineral rich in Fe and B elements. The TW10 catalyst can quickly activate peroxymonosulfate (PMS) to generate massive active free radicals, which may induce the rapid and efficient degradation of tetracycline (TC). The TW10/PMS/Visible light system can effectively degrade up to 98.7% of tetracycline (TC) in actual waters (i.e. seawater, Yellow River, and Yangtze River water), and the catalytic degradation rates reach 1.65, 5.569, and 2.38 times higher than those of TM, WO3-x, and commercial P25 (Degussa, Germany), respectively. In addition, the catalyst can be recycled and reused multiple times. Electron spin resonance spectroscopy (EPR), X-ray photoelectron spectroscopy (XPS), and liquid chromatograph-mass spectrometer (LC-MS) analyses confirm that the synergistic catalytic effect of W/B/Fe sites on the TW10 catalyst accelerates the electron transfer between Fe(II) and Fe(III), as well as between W(V) and W(VI), and thus promotes the rapid degradation of TC. The catalytic reaction mechanism and degradation pathway of TC were explored. This work provides a feasible route for the design and development of new eco-friendly and efficient catalyst.

Ultrathin MnO2-Coated FeOOH Catalyst for Indoor Formaldehyde Oxidation at Ambient Temperature: New Insight into Surface Reactive Oxygen Species and In-Field Testing in an Air Cleaner.

Herein, we tailored a series of ultrathin MnO2 nanolayers coated on the surface of commercial goethite (α-FeOOH) by a facile in situ chemical precipitation method. α-FeOOH inhibited the MnO2 crystal growth via the incorporation of K+ ions between MnO2 and α-FeOOH interfaces during the synthesis process. The hybrid design of MnO2 with an ultrathin nanolayer structure could reduce the electron transfer resistance and bring abundant oxygen vacancies, accelerating the activation of molecular O2 to generate more oxygen-free radical species and favoring the thermodynamic HCHO oxidation. The ROS quenching in gas/aqueous systems and DRIFTS results demonstrated that •O2- was responsible for HCHO oxidization, which assisted the preliminary intermediate dioxymethylene dehydrogenation into formate species. The 25%MnO2@FeOOH(25wt% of MnO2) catalyst was subsequently loaded into the filter substrates of a commercial air cleaner and tested in an indoor room with actual application conditions. As a result, the composite filter could eliminate different initial concentrations of HCHO (150-450 ppb) to the WHO guideline value (≈81 ppb) within 60 min. Furthermore, the 25%MnO2@FeOOH sample was also effective against the representative bacteria and mold in indoor air. This study provides new insight into the role of the chemisorbed ROS for HCHO oxidation at ambient temperature.

Highly active oxygen evolution integrated with efficient CO2 to CO electroreduction.

Electrochemical reduction of CO2 to useful chemicals has been actively pursued for closing the carbon cycle and preventing further deterioration of the environment/climate. Since CO2 reduction reaction (CO2RR) at a cathode is always paired with the oxygen evolution reaction (OER) at an anode, the overall efficiency of electrical energy to chemical fuel conversion must consider the large energy barrier and sluggish kinetics of OER, especially in widely used electrolytes, such as the pH-neutral CO2-saturated 0.5 M KHCO3 OER in such electrolytes mostly relies on noble metal (Ir- and Ru-based) electrocatalysts in the anode. Here, we discover that by anodizing a metallic Ni-Fe composite foam under a harsh condition (in a low-concentration 0.1 M KHCO3 solution at 85 °C under a high-current ∼250 mA/cm2), OER on the NiFe foam is accompanied by anodic etching, and the surface layer evolves into a nickel-iron hydroxide carbonate (NiFe-HC) material composed of porous, poorly crystalline flakes of flower-like NiFe layer-double hydroxide (LDH) intercalated with carbonate anions. The resulting NiFe-HC electrode in CO2-saturated 0.5 M KHCO3 exhibited OER activity superior to IrO2, with an overpotential of 450 and 590 mV to reach 10 and 250 mA/cm2, respectively, and high stability for >120 h without decay. We paired NiFe-HC with a CO2RR catalyst of cobalt phthalocyanine/carbon nanotube (CoPc/CNT) in a CO2 electrolyzer, achieving selective cathodic conversion of CO2 to CO with >97% Faradaic efficiency and simultaneous anodic water oxidation to O2 The device showed a low cell voltage of 2.13 V and high electricity-to-chemical fuel efficiency of 59% at a current density of 10 mA/cm2.

Removal of As(V) from wastewaters using magnetic iron oxides formed by zero-valent iron electrocoagulation.

Electrocoagulation of zero-valent iron has been widely applied to the removal of dissolved arsenic, but the solid-liquid separation of arsenic-containing precipitates remains technically challenging. In this work, zero-valent iron was electrochemically oxidized to magnetic iron oxides for the removal of As(Ⅴ) from simulated and actual mining wastewaters. The results indicated that lepidocrocite was formed when zero-valent iron was oxidized by dissolved oxygen, but ferrihydrite and green rust were first formed and then transformed to magnetic iron oxides (mainly magnetite and maghemite) in the electrochemical oxidation from 0 to 0.9 V (vs. SCE), which facilitates the adsorption of As(V) and subsequent solid-liquid separation under a magnetic field. In simulated As(V)-containing solution with initial pH 7.0, zero-valent iron was electrochemically oxidized to magnetite and maghemite at 0.6 V (vs. SCE) for 2 h. The As(V) concentration first decreased from 5127.5 to 26.8 µg L-1 with a removal ratio of 99.5%. In actual mining wastewaters, zero-valent iron was electrochemically oxidized to maghemite at 0.6 V (vs. SCE) for 24 h, and the As(V) concentration decreased from 5486.4 to 3.6 µg L-1 with a removal ratio of 99.9%. The removal ratio of As(V) increased slightly with increasing potential, and increased first and then decreased with increasing initial pH. Compared with that of SO42- and NO3-, the presence of Cl- significantly enhanced the removal of As(V). This work provides a highly efficient, facile and low-cost technique for the treatment of arsenic-containing wastewaters.

Effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria: Soot-ceria contact and interfacial oxygen evolution.

Ceria is widely used as a catalyst for soot combustion, but effects of Zr substitution on the reaction mechanism is ambiguous. The present work elucidates effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria. The nanostructured CeO2, Ce0.92Zr0.08O2, and Ce0.84Zr0.16O2 composed of 5-6 nm crystallites display Tm-CO2 (the temperature at maximum CO2 yield) at 383, 355, and 375°C under 10 vol.% O2/N2, respectively. The size of agglomerate decreases from 165.5 to 51.9-57.3 nm, which is beneficial for the soot-ceria contact. Moreover, Zr increases the amount of surface oxygen vacancies, generating more active oxygen (O2- and O-) for soot oxidation. Thus, the activities of Ce0.92Zr0.08O2 and Ce0.84Zr0.16O2 in soot combustion are better than that of CeO2. Although oxygen vacancies promote the migration of lattice O2-, the enriched surface Zr also inhibits the mobility of lattice O2-. Therefore, the Tm-CO2 of Ce0.84Zr0.16O2 is higher than that of Ce0.92Zr0.08O2. Based on reaction kinetic study, soot in direct contact with ceria preferentially decomposes with low activation energy, while the oxidation of isolated soot occurs through diffusion with high activation energy. The obtained findings provide new understanding on the soot combustion over nanoceria.

In Situ Identification of Reaction Intermediates and Mechanistic Understandings of Methane Oxidation over Hematite: A Combined Experimental and Theoretical Study.

Effective methane utilization for either clean power generation or value-added chemical production has been a subject of growing attention worldwide for decades, yet challenges persist mostly in relation to methane activation under mild conditions. Here, we report hematite, an earth-abundant material, to be highly effective and thermally stable to catalyze methane combustion at low temperatures (<500 °C) with a low light-off temperature of 230 °C and 100% selectivity to CO2. The reported performance is impressive and comparable to those of precious-metal-based catalysts, with a low apparent activation energy of 17.60 kcal·mol-1. Our theoretical analysis shows that the excellent performance stems from a tetra-iron center with an antiferromagnetically coupled iron dimer on the hematite (110) surface, analogous to that of the methanotroph enzyme methane monooxygenase that activates methane at ambient conditions in nature. Isotopic oxygen tracer experiments support a Mars van Krevelen redox mechanism where CH4 is activated by reaction with a hematite surface oxygen first, followed by a catalytic cycle through a molecular-dioxygen-assisted pathway. Surface studies with in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and density functional theory (DFT) calculations reveal the evolution of reaction intermediates from a methoxy CH3-O-Fe, to a bridging bidentate formate b-HCOO-Fe, to a monodentate formate m-HCOO-Fe, before CO2 is eventually formed via a combination of thermal hydrogen-atom transfer (HAT) and proton-coupled electron transfer (PCET) processes. The elucidation of the reaction mechanism and the intermediate evolutionary profile may allow future development of catalytic syntheses of oxygenated products from CH4 in gas-phase heterogeneous catalysis.

Syntheses of ZnO with Different Morphologies: Catalytic Activity toward Coumarin Synthesis via the Knoevenagel Condensation Reaction.

Heterogeneous catalysts are preferred in fine chemical industries due to their easy recovery and reusability. Here, we report an easily scalable method of ZnO catalysts for coumarin synthesis. Nanocrystalline ZnO particles with diverse morphologies and crystallite sizes were prepared using different solvents. The change in morphology results in changes in band gaps, defects, basicity, and textural properties (surface areas, pore volumes, and pore sizes). The catalytic performances of the synthesized ZnO materials were tested using coumarin synthesis via the Knoevenagel condensation. The catalyst synthesized using methanol shows the highest activity and selectivity (conversion of 74%, selectivity of 94%) with a turnover number of 14.69. The increased activity of the ZnO synthesized in methanol is attributed to the combined effects of moderate basicity and relatively high textural properties of the sample.

Solar Irradiation Induced Transformation of Ferrihydrite in the Presence of Aqueous Fe2.

Ferrihydrite commonly occurs in soils and sediments, especially in acid mine drainage (AMD). Solar irradiation may affect Fe(II)-catalyzed transformation of metastable ferrihydrite to more stable iron oxides on AMD surface. We investigated the Fe(II)-catalyzed transformation process and mechanism of ferrihydrite under light irradiation. In nitrogen atmosphere, Fe2+aq could be oxidized to goethite and lepidocrocite by hydroxyl radical (OH•), superoxide radical (O2•-) and hole (hvb+) generated from ferrihydrite under ultraviolet (UV) irradiation (300-400 nm) at pH 6.0, and O2•- and hvb+ were mainly responsible for Fe2+aq oxidation. In addition, the ligand-to-metal charge-transfer (LMCT) process between Fe(II) and ferrihydrite could be promoted by UV irradiation. Goethite proportion increased with increasing Fe2+aq concentration. Both visible (vis) and solar irradiation could also lead to the oxidation of Fe2+aq to goethite and lepidocrocite, and the proportion of lepidocrocite increased with increasing light intensity. Fe2+aq was photochemically oxidized to schwertmannite at pH 3.0 and 4.5, and the oxidation rate was higher than that under dark conditions in air. The photochemical oxidation rate of Fe2+aq decreased in the presence of humic acid. This study facilitates a better understanding of the formation and transformation of iron oxides in natural environments and ancient Earth.

Template-Guided Programmable Janus Heteronanostructure Arrays for Efficient Plasmonic Photocatalysis.

Janus heteronanostructures (HNs), as an important class of anisotropic nanomaterials, could facilitate synergistic coupling of diverse functions inherited by their comprised nanocomponents. Nowadays, synthesizing deterministically targeted Janus HNs remains a challenge. Here, a general yet scalable technique is utilized to fabricate an array of programmable Janus HNs based on anodic aluminum oxide binary-pore templates. By designing and employing an overetching process to partially expose four-edges of one set of nanocomponents in a binary-pore template, selective deposition and interfacing of the other set of nanocomponents is successfully achieved along the exposed four-edges to form a densely packed array of Janus HNs on a large scale. In combination with an upgraded two-step anodization, the synthesis provides high degrees of freedom for both nanocomponents of the Janus HNs, including morphologies, compositions, dimensions, and interfacial junctions. Arrays of TiO2-Au and TiO2/Pt NPs-Au Janus HNs are designed, fabricated, and demonstrated about 2.2 times photocurrent density and 4.6 times H2 evolution rate of that obtained from their TiO2 counterparts. The enhancement was mainly determined as a result of localized surface plasmon resonance induced direct hot electron injection and strong plasmon resonance energy transfer near the interfaces of TiO2 nanotubes and Au nanorods. This study may represent a promising step forward to pursue customized Janus HNs, leading to novel physicochemical effects and device applications.

Electrochemical and Surface-Plasmon Correlation of a Serum-Autoantibody Immunoassay with Binding Insights: Graphenyl Surface versus Mercapto-Monolayer Surface.

We present here the correlation of picomolar affinities between surface-plasmon and electrochemical immunoassays for the binding of serum glutamic acid decarboxylase 65 autoantibody (GADA), a biomarker of type 1 diabetes (T1D), to its antigen GAD-65. Carboxylated (∼5.0%)-graphene-modified immunoassembly on a gold surface-plasmon chip or on an electrochemical array provided significantly larger binding affinity, higher sensitivity, and lower detection limits than a self-assembled monolayer surface of mercaptopropionic acid (MPA). Estimation of the relative surface -COOH groups by covalent tagging of an electroactive aminoferrocene showed that the graphenyl surface displayed a greater number of -COOH groups (9-fold) than the MPA surface. X-ray-photoelectron-spectroscopy analysis showed more C-O and C═O functionalities on the graphene-COOH surface than on the MPA surface. The graphene-COOH coating on gold exhibited ∼5.5-fold enhancement of plasmon signals compared with a similar coating on a plain glass surface. In summary, this article provides a quantitative comparison of carboxylated graphene with a mercapto-monolayer immunoassembly. Additionally, we propose that the binding-constant value can be useful as a quality-control checkpoint for reproducible and reliable production of large-scale biosensors for clinical bioassays.

Ultrafine and Ligand-Free Precious Metal (Ru, Ag, Au, Rh and Pd) Nanoclusters Supported on Phosphorus-Doped Carbon.

We report the use of phosphorus-doped carbon (P-C) as support to grow ultrasmall (1-3 nm) and ligand-free precious metal nanocrystals (PMNCs) via chemical reduction. We show that the valence states of surface phosphorus species are critical in tuning the affinity between the carbon support and metal precursors, which rationally controls the loading size and uniformity of resultant PMNCs. Five kinds of PMNCs, including Ru, Ag, Au, Rh, and Pd, were grown in situ to demonstrate the key role of surface phosphorus sites on the P-C support. As a proof-of-concept application, Ru nanocatalysts with an average diameter of 1.0±0.2 nm supported on P-C were examined for the electrocatalytic hydrogen evolution reaction (HER). Ultrasmall and ligand-free Ru nanocatalysts exhibited superior HER activity and stability compared to its counterparts with surface agents or larger sizes. An overpotential of 27.6 mV (vs. reversible hydrogen electrode) for Ru nanocatalysts was achieved at a current density of 10 mA cm-2 . This novel method opens a new avenue to immobilize ligand-free and well-dispersed PMNCs on carbon; and, more importantly, it provides a new library of supported PMNCs with high catalytic activity.

Single-Doped and Multidoped Transition-Metal (Mn, Fe, Co, and Ni) ZnO and Their Electrocatalytic Activities for Oxygen Reduction Reaction.

The electrochemical oxygen reduction reaction (ORR) is the limiting half-reaction of fuel cells, which is mediated by using platinum-based catalysts. Hence, the development of low-cost, active ORR catalysts is highly required to make fuel cell technology commercially available. In this report, transition-metal (TM; Mn, Fe, Co, and Ni) single-doped and multidoped (MD) ZnO nanocrystals (ZNs) were prepared for use as ORR catalysts using a simple precipitation method. The effects of single doping and multidoping on the structure, morphology, and properties of the TM-doped ZNs were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence, X-ray photoelectron microscopy, electron paramagnetic resonance, and Raman and photoluminescence (PL) spectroscopies. The XRD results reveal that synthesized ZnO samples retained a pure hexagonal wurtzite crystal structure, even at high levels of multidoping (nominal 20%). SEM analyses show that the morphology of the prepared ZNs varies with the doping elements, doping mode, and amounts of doping. The observation of peak shifting and peak intensity changes in Raman studies confirms the presence of dopants in ZnO. The PL investigation reveals that the incorporation of dopants into the ZnO structure increases the oxygen vacancies within the materials. The highest oxygen vacancies were present in Mn-doped ZnO and 15% MD ZnO among the single-doped and MD samples, respectively. Linear-sweep voltammetry studies conclude that doped ZnO shows enhanced ORR activity compared to the undoped samples. The Mn-doped ZnO and 15% MD ZnO exhibited the highest ORR activity among the prepared single-doped and MD ZN samples, respectively. In comparison, single doping showed better ORR activity than the multidoping system. The enhanced ORR activity of the synthesized ZN materials correlates with the amount of oxygen vacancies present in the samples. The enhanced activity of TM-doped ZnO suggests that these materials can be used as potential, low-cost electrocatalysts for ORR in fuel cell technology.

Synthesis and Electrocatalytic Activity of Ammonium Nickel Phosphate, [NH4]NiPO4·6H2O, and ß-Nickel Pyrophosphate, ß-Ni2P2O7: Catalysts for Electrocatalytic Decomposition of Urea.

Electrocatalytic decomposition of urea for the production of hydrogen, H2, for clean energy applications, such as in fuel cells, has several potential advantages such as reducing carbon emissions in the energy sector and environmental applications to remove urea from animal and human waste facilities. The study and development of new catalyst materials containing nickel metal, the active site for urea decomposition, is a critical aspect of research in inorganic and materials chemistry. We report the synthesis and application of [NH4]NiPO4·6H2O and ß-Ni2P2O7 using in situ prepared [NH4]2HPO4. The [NH4]NiPO4·6H2O is calcined at varying temperatures and tested for electrocatalytic decomposition of urea. Our results indicate that [NH4]NiPO4·6H2O calcined at 300 °C with an amorphous crystal structure and, for the first time applied for urea electrocatalytic decomposition, had the greatest reported electroactive surface area (ESA) of 142 cm2/mg and an onset potential of 0.33 V (SCE) and was stable over a 24-h test period.

Synthesis of Large Mesoporous-Macroporous and High Pore Volume, Mixed Crystallographic Phase Manganese Oxide, Mn2O3/Mn3O4 Sponge.

The controlled synthesis of mixed crystallographic phase Mn2O3/Mn3O4 sponge material by varying heating rates and isothermal segments provides valuable information about the morphological and physical properties of the obtained sample. The well-characterized Mn2O3/Mn3O4 sponge and applicability of difference in reactivity of H2 and CO2 desorbed during the synthesis provide new developments in the synthesis of metal oxide materials with unique morphological and surface properties. We report the preparation of a Mn2O3/Mn3O4 sponge using a metal nitrate salt, water, and Dextran, a biopolymer consisting of glucose monomers. The Mn2O3/Mn3O4 sponge prepared at 1 °C·min-1 heating rate to 500 °C and held isothermally for 1 h consisted of large mesopores-macropores (25.5 nm, pore diameter) and a pore volume of 0.413 mL/g. Furthermore, the prepared Mn2O3/Mn3O4 and 5 mol %-Fe-Mn2O3/Mn3O4 sponges provide potential avenues in the development of solid-state catalyst materials for alcohol and amine oxidation reactions.

Photochemical Formation and Transformation of Birnessite: Effects of Cations on Micromorphology and Crystal Structure.

As important components with excellent oxidation and adsorption activity in soils and sediments, manganese oxides affect the transportation and fate of nutrients and pollutants in natural environments. In this work, birnessite was formed by photocatalytic oxidation of Mn2+aq in the presence of nitrate under solar irradiation. The effects of concentrations and species of interlayer cations (Na+, Mg2+, and K+) on birnessite crystal structure and micromorphology were investigated. The roles of adsorbed Mn2+ and pH in the transformation of the photosynthetic birnessite were further studied. The results indicated that Mn2+aq was oxidized to birnessite by superoxide radicals (O2•-) generated from the photolysis of NO3- under UV irradiation. The particle size and thickness of birnessite decreased with increasing cation concentration. The birnessite showed a plate-like morphology in the presence of K+, while exhibited a rumpled sheet-like morphology when Na+ or Mg2+ was used. The different micromorphologies of birnessites could be ascribed to the position of cations in the interlayer. The adsorbed Mn2+ and high pH facilitated the reduction of birnessite to low-valence manganese oxides including hausmannite, feitknechtite, and manganite. This study suggests that interlayer cations and Mn2+ play essential roles in the photochemical formation and transformation of birnessite in aqueous environments.

Mesoporous Iron Sulfide for Highly Efficient Electrocatalytic Hydrogen Evolution.

We report a facile synthetic protocol to prepare mesoporous FeS2 without the aid of hard template as an electrocatalyst for the hydrogen evolution reaction (HER). The mesoporous FeS2 materials with high surface area were successfully prepared by a sol-gel method following a sulfurization treatment in an H2S atmosphere. A remarkable HER catalytic performance was achieved with a low overpotential of 96 mV at a current density of 10 mA·cm-2 and a Tafel slope of 78 mV per decade under alkaline conditions (pH 13). The theoretical calculations indicate that the excellent catalytic activity of mesoporous FeS2 is attributed to the exposed (210) facets. The mesoporous FeS2 material might be a promising alternative to the Pt-based electrocatalysts for water splitting.

Robust Macroscopic 3D Sponges of Manganese Oxide Molecular Sieves.

The construction of macroscopic 3D sponges is of great technological importance for various applications. An outstanding challenge is the facile fabrication of sponges with the desirable combination of good stability, high electrical conductivity, and absorption ability. Here free-standing 3D OMS-2 sponges are demonstrated, with various densities, which possess a combination of desirable physical properties including high porosity, robustness, permeability, recyclability, high electrical conductivity, and selective water absorption in preference to oil. Some of these properties have systematic trends with various densities. The stress of the OMS-2 sponge, made by nanowire-based freeze-drying process, is four orders of magnitude higher than that made by calcination-related process. These new materials should find practical applications in environmental, catalysis, sensing, absorption, and energy storage, particularly in the removal of water spill cleanup, and beyond.