Van der Waals Magnetic Electrode Transfer for Two-Dimensional Spintronic Devices.

Two-dimensional (2D) materials are promising candidates for spintronic applications. Maintaining their atomically smooth interfaces during integration of ferromagnetic (FM) electrodes is crucial since conventional metal deposition tends to induce defects at the interfaces. Meanwhile, the difficulties in picking up FM metals with strong adhesion and in achieving conductance match between FM electrodes and spin transport channels make it challenging to fabricate high-quality 2D spintronic devices using metal transfer techniques. Here, we report a solvent-free magnetic electrode transfer technique that employs a graphene layer to assist in the transfer of FM metals. It also serves as part of the FM electrode after transfer for optimizing spin injection, which enables the realization of spin valves with excellent performance based on various 2D materials. In addition to two-terminal devices, we demonstrate that the technique is applicable for four-terminal spin valves with nonlocal geometry. Our results provide a promising future of realizing 2D spintronic applications using the developed magnetic electrode transfer technique.

Achieving High Rate and Long Cycle Performance of Na2FePO4F Cathode Through Co-Modification of Ti Doping and Carbon Coating.

Layered Na2FePO4F (NFPF) cathode material has received widespread attention due to its green nontoxicity, abundant raw materials, and low cost. However, its poor inherent electronic conductivity and sluggish sodium ion transportation seriously impede its capacity delivery and cycling stability. In this work, NFPF by Ti doping and conformal carbon layer coating via solid-state reaction is modified. The results of experimental study and density functional theory calculations reveal that Ti doping enhances intrinsic conductivity, accelerates Na-ion transport, and generates more Na-ion storage sites, and pyrolytic carbon from polyvinylpyrrolidone (PVP) uniformly coated on the NFPF surface improves the surface/interface conductivity and suppresses the side reactions. Under the combined effect of Ti doping and carbon coating, the optimized NFPF (marked as 5T-NF@C) exhibits excellent electrochemical performance, with a high capacity of 108.4 mAh g-1 at 0.2C, a considerable capacity of 80.0 mAh g-1 even at high current density of 10C, and a high capacity retention rate of 81.8% after 2000 cycles at 10C. When assembled into a full cell with a hard carbon anode, 5T-NF@C also show good applicability. This work indicates that co-modification of Ti doping and carbon coating makes NFPF achieve high rate and long cycle performance for sodium-ion batteries.

Molecular layer modulation of two-dimensional organic ferroelectric transistors.

Ferroelectric transistors hold great potential in low consumption devices. Due to the high film quality and clean system, two dimensional organic semiconductors are widely employed to fabricate high performance organic electronic devices and explore the modulation mechanism of the molecular packing on device performance. Here, we combine the ferroelectric hafnium oxide HfZrOxand two-dimensional molecular crystal 2,9-didecyldinaphtho[2,3-b:2',3'-f]thieno[3,2b]thiophene (C10-DNTT) with controllable layers to study the molecular layer modulation of ferroelectric organic thin-film transistors (OTFTs). The contact resistance, driving current and transconductance are directly affected by the additional access resistance across the upper molecular layers at the source/drain contact region. Simultaneously, the capacitance of Schottky junction related to the molecular layer thickness could effectively adjust the gate potential acting on the organic channel, further controlling the devices' subthreshold swing and transconductance efficiency. This work would promote the development of low voltage and high performance OTFTs.

Ciltacabtagene autoleucel in patients with relapsed/refractory multiple myeloma: CARTITUDE-1 (phase 2) Japanese cohort.

Chimeric antigen receptor (CAR) T cells targeting B-cell maturation antigen have shown positive responses in patients with multiple myeloma (MM). The phase 2 portion of the CARTITUDE-1 study of ciltacabtagene autoleucel (cilta-cel) included a cohort of Japanese patients with relapsed/refractory MM. Following a conditioning regimen of cyclophosphamide (300 mg/m2 ) and fludarabine (30 mg/m2 ), patients received a single cilta-cel infusion at a target dose of 0.75 × 106 (range, 0.5-1.0 × 106 CAR-positive viable T cells/kg). The primary endpoint was overall response rate (ORR; defined as partial response or better) by International Myeloma Working Group criteria. A key secondary endpoint was the rate of very good partial response (VGPR) or better (defined as VGPR, complete response, stringent complete response). This first analysis was performed at 6 months after the last patient received cilta-cel. Thirteen patients underwent apheresis, nine of whom received cilta-cel infusion. Eight patients who received cilta-cel at the target dose responded, yielding an ORR of 100%. Seven of eight (87.5%) patients achieved a VGPR or better. One additional patient who received a below-target dose of cilta-cel also achieved a best response of VGPR. MRD negativity (10-5 threshold) was achieved in all six evaluable patients. Eight of nine (88.9%) patients who received cilta-cel infusion experienced a grade 3 or 4 adverse event, and eight (88.9%) patients experienced cytokine release syndrome (all grade 1 or 2). No CAR-T cell neurotoxicity was reported. A positive benefit/risk profile for cilta-cel was established for heavily pretreated Japanese patients with relapsed or refractory MM.

Enhanced polarization photodetection of metallic cavity ensemble through spontaneously configured lateral electrodes.

Metallic cavities show substantial advantages in light confinement, providing opportunities to modulate the optical resonances and absorption. Here, we report on the configuration of horizontally aligned ZnO-nanowires-based metallic cavity ensemble with a light to dark current ratio of ∼1000. An enhanced polarization photodetection ratio of transverse electric (TE) to transverse magnetic (TM) was experimentally observed compared to the single ZnO nanowire photodetector. Finite difference time domain simulation was performed on the metallic cavities, showing the distinct resonance behaviors under TE and TM light. The confinement by the multi-reflection and optical resonances between the metallic claddings contribute to the high anisotropy ratio. Furthermore, the polarized light absorption in the metallic cavity was studied as well as in the naked nanowire, which reveal a significant dependence on the cavity diameter and wavelength. For the metallic cavities, the absorption ratio of TE to TM show an enhanced value in the range of 300-500 nm wavelength and 85-150 diameter and a reversed value in the range of 400-500 nm wavelength and 17-50 diameter. While for the naked nanowires, the ratio show an apparently opposite value in these two regions. The presented metallic cavities demonstrate a specific paradigm of optical engineering in nanoscale and potentially helps the development of optoelectronic devices.

Atomically thin van der Waals tunnel field-effect transistors and its potential for applications.

Power dissipation is a crucial problem as the packing density of transistors increases in modern integrated circuits. Tunnel field-effect transistors (TFETs), which have high energy filtering provided by band-to-band tunneling (BTBT), have been proposed as an alternative electronics architecture to decrease the energy loss in bias operation and to achieve steep switching at room temperature. Very recently, the BTBT behavior has been demonstrated in van der Waals heterostructures by using unintentionally doped semiconductors. The reason of the BTBT formation is attributed to a significant band bending near the heterointerface, resulting in carrier accumulations. In this work, to investigate charge transport in type-III transistors, we adopted the same band-bending concept to fabricate van der Waals BP/MoS2 heterostructures. Through analyzing the temperature dependence of their electrical properties, we carefully ruled out the contribution of metal-semiconductor contact resistances and improved our understanding of carrier injection in 2D type-III transistors. The BP/MoS2 heterostructures showed both negative differential resistance and 1/f 2 current fluctuations, strongly demonstrating the BTBT operation. Finally, we also designed a TFET based on this heterostructure with an ionic liquid gate, and this TFET demonstrated an subthreshold slope can successfully surmount the thermal limit of 60 mV/decade. This work improves our understanding of charge transport in such layered heterostructures and helps to improve the energy efficiency of next-generation nanoscale electronics.

Investigations on Zr incorporation into Li3V2(PO4)3/C cathode materials for lithium ion batteries.

Li3V2(PO4)3/C (LVP/C) composites have been modified by different ways of Zr-incorporation via ultrasonic-assisted solid-state reaction. The difference in the effect on the physicochemical properties and the electrochemical performance of LVP between Zr-doping and ZrO2-coating has also been investigated. Compared with pristine LVP/C, Zr-incorporated LVP/C composites exhibit better rate capability and cycling stability. In particular, the LVP/C-Zr electrode delivers the highest initial capacity of 150.4 mA h g-1 at 10C with a capacity retention ratio of 88.4% after 100 cycles. The enhanced electrochemical performance of Zr-incorporated LVP/C samples (LVZrP/C and LVP/C-Zr) is attributed to the increased ionic conductivity and electronic conductivity, the improved stability of the LVP structure, and the decreased charge-transfer resistance.

Pseudosaccharin amines as potent and selective KV1.5 blockers.

Phenethyl aminoheterocycles like compound 1 were known to be potent I(Kur) blockers although they lacked potency in vivo. Modification of the heterocycle led to the design and synthesis of pseudosaccharin amines. Compounds such as 14, 17d and 21c were found to be potent K(V)1.5 blockers and selective over other cardiac ion channels. These compounds had potent pharmacodynamic activity, however, they also showed off-target activities such as hemodynamic effects.

Design, synthesis and evaluation of phenethylaminoheterocycles as K(v)1.5 inhibitors.

Phenethylaminoheterocycles have been prepared and assayed for inhibition of the Kv1.5 potassium ion channel as a potential approach to the treatment of atrial fibrillation. A diverse set of heterocycles were identified as potent Kv1.5 inhibitors and were advanced to pharmacodynamic evaluation based on selectivity and pharmacokinetic profile. Heterocycle optimization and template modification lead to the identification of compound 24 which demonstrated increased atrial effective refractory period in the rabbit pharmacodynamic model with mild effects on blood pressure and heart rate.

Patterning technology for solution-processed organic crystal field-effect transistors.

Organic field-effect transistors (OFETs) are fundamental building blocks for various state-of-the-art electronic devices. Solution-processed organic crystals are appreciable materials for these applications because they facilitate large-scale, low-cost fabrication of devices with high performance. Patterning organic crystal transistors into well-defined geometric features is necessary to develop these crystals into practical semiconductors. This review provides an update on recentdevelopment in patterning technology for solution-processed organic crystals and their applications in field-effect transistors. Typical demonstrations are discussed and examined. In particular, our latest research progress on the spin-coating technique from mixture solutions is presented as a promising method to efficiently produce large organic semiconducting crystals on various substrates for high-performance OFETs. This solution-based process also has other excellent advantages, such as phase separation for self-assembled interfaces via one-step spin-coating, self-flattening of rough interfaces, and in situ purification that eliminates the impurity influences. Furthermore, recommendations for future perspectives are presented, and key issues for further development are discussed.

Achieving High-Performance Na3V2(PO4)2F3 Cathode Material through a Bifunctional N-Doped Carbon Network.

Na3V2(PO4)2F3 (NVPF) is emerging as a popular cathode for sodium-ion batteries owing to its stable structure, high operating voltage, and large energy density. However, its practical application is hindered by its low conductivity. In addition, due to the loss of fluorine during synthesis, Na3V2(PO4)3 (NVP) impurity is often easily generated, resulting in a decrease in actual operating voltage. Herein, a bifunctional carbon network composed of an N-doped carbon layer and carbon bridge is constructed around NVPF particles. Through pyrolysis of polydopamine (PDA), the NVPF particles are covered in situ by an N-doped carbon layer, and the carbon bridge generated by polytetrafluoroethylene (PTFE) is also coated with N-doped carbon. Besides, PTFE also serves as a fluorine supplement to ensure that pure NVPF is obtained. As a result, the bifunctional N-doped carbon network-modified NVPF delivers a high reversible capacity (125.7 mA h g-1 at 0.2 C) and appreciable cycle stability (92.7% at 1 C over 300 cycles, and 89.8% at 10 C over 1500 cycles). When assembled into a full cell with a commercial hard carbon anode, it displays a discharge median voltage of up to 3.62 V at 0.2 C. Furthermore, it achieves a high energy density of 373.7 W h kg-1 at a power density of 461.2 W kg-1, with an excellent specific energy retention of 78.2% after 200 cycles. Therefore, this modification method is expected to be extended to other fluorine-containing materials with poor electrical conductivity.

Hollow Layered Iron-Based Prussian Blue Cathode with Reduced Defects for High-Performance Sodium-Ion Batteries.

Fe-based Prussian blue (Fe-PB) analogues have emerged as promising cathode materials for sodium-ion batteries, owing to their cost-effectiveness, high theoretical capacity, and environmental friendliness. However, their practical application is hindered by [Fe(CN)6] defects, negatively impacting capacity and cycle stability. This work reports a hollow layered Fe-PB composite material using 1,3,5-benzenetricarboxylic acid (BTA) as a chelating and etching agent by the hydrothermal method. Compared to benzoic acid, our approach significantly reduces defects and enhances the yield of Fe-PB. Notably, the hollow layered structure shortens the diffusion path of sodium ions, enhances the activity of low-spin Fe in the Fe-PB lattice, and mitigates volume changes during Na-ion insertion/extraction into/from Fe-PB. As a sodium-ion battery cathode, this hollow layered Fe-PB exhibits an impressive initial capacity of 95.9 mAh g-1 at a high current density of 1 A g-1. Even after 500 cycles, it still maintains a considerable discharge capacity of 73.1 mAh g-1, showing a significantly lower capacity decay rate (0.048%) compared to the control sample (0.089%). Moreover, the full cell with BTA-PB-1.6 as the cathode and HC as the anode provides a considerable energy density of 312.2 Wh kg-1 at a power density of 291.0 W kg-1. This research not only enhances the Na storage performance of Fe-PB but also increases the yield of products obtained by hydrothermal methods, providing some technical reference for the production of PB materials using the low-yield hydrothermal method.

Cilta-cel, a BCMA-targeting CAR-T therapy for patients with multiple myeloma.

INTRODUCTION: Ciltacabtagene autoleucel (cilta-cel), a BCMA-targeting CAR-T therapy, is approved in the United States and Europe for patients with relapsed/refractory multiple myeloma (RRMM) and ≥1 prior line of therapy (LOT), including a proteasome inhibitor and an immunomodulatory drug, and are lenalidomide refractory. AREAS COVERED: We examine recent long-term data in heavily pretreated RRMM (LEGEND-2, CARTITUDE-1) and earlier LOTs (CARTITUDE-4) compared with standard therapy and discuss the rationale for investigating cilta-cel as frontline therapy for transplant-eligible and transplant-ineligible patients (CARTITUDE-5, CARTITUDE-6). EXPERT OPINION: CAR-T therapies can improve outcomes for patients with MM across different LOTs. CARTITUDE-1 and CARTITUDE-4 have set a new bar for efficacy, with median PFS of 34.9 months in heavily pretreated patients (CARTITUDE-1) and a 74% relative risk reduction for progression/death versus standard care in patients with 1-3 prior LOTs (CARTITUDE-4), with manageable safety. Response rates were consistent between the two studies: 98% in CARTITUDE-1 and approaching 100% for infused patients in CARTITUDE-4. Cilta-cel could be a key treatment choice for patients with RRMM after first LOT. Clinical trials investigating frontline cilta-cel therapy will provide valuable insights into optimizing treatment pathways with the aim to potentially cure MM.

Fabrication of lateral electrodes on semiconductor nanowires through structurally matched insulation for functional optoelectronics.

A strategy of using structurally matched alumina insulation to produce lateral electrodes on semiconductor nanowires is presented. Nanowires in the architecture are structurally matched with alumina insulation using selective anodic oxidation. Lateral electrodes are fabricated by directly evaporating metallic atoms onto the opposite sides of the nanowires. The integrated architecture with lateral electrodes propels carriers to transport them across nanowires and is crucially beneficial to the injection/extraction in optoelectronics. The matched architecture and the insulating properties of the alumina layer are investigated experimentally. ZnO nanowires are functionalized into an ultraviolet photodiode as an example. The present strategy successfully implements an advantageous architecture and is significant in developing diverse semiconductor nanowires in optoelectronic applications.

Investigation on epitaxial lateral overgrowth of InGaN/GaN multi-quantum-well nanowires.

To achieve semipolar InGaN/GaN multi-quantum-well (MQW) structure, we fabricate InGaN/GaN MQW nanowires by using a combination of selectively epitaxial lateral overgrowth and patterned GaN/sapphire substrate techniques. Basing on the SEM observations, the nanowires along different crystal orientation of GaN substrate have various surface morphologies. Furthermore, cathodoluminescence measurements exhibit the dependence of the emission peaks of InGaN quantum wells on the axial direction of nanowires, being mainly attributed to the change of the morphology situation of the side facet. The shift of the peaks is larger than 30 nm as the axial direction of a nanowire varies between [1120] and [1100].

Modifying the Power and Performance of 2-Dimensional MoS2 Field Effect Transistors.

Over the past 60 years, the semiconductor industry has been the core driver for the development of information technology, contributing to the birth of integrated circuits, Internet, artificial intelligence, and Internet of Things. Semiconductor technology has been evolving in structure and material with co-optimization of performance-power-area-cost until the state-of-the-art sub-5-nm node. Two-dimensional (2D) semiconductors are recognized by the industry and academia as a hopeful solution to break through the quantum confinement for the future technology nodes. In the recent 10 years, the key issues on 2D semiconductors regarding material, processing, and integration have been overcome in sequence, making 2D semiconductors already on the verge of application. In this paper, the evolution of transistors is reviewed by outlining the potential of 2D semiconductors as a technological option beyond the scaled metal oxide semiconductor field-effect transistors. We mainly focus on the optimization strategies of mobility (µ), equivalent oxide thickness (EOT), and contact resistance (RC ), which enables high ON current (Ion ) with reduced driving voltage (Vdd ). Finally, we prospect the semiconductor technology roadmap by summarizing the technological development of 2D semiconductors over the past decade.

Revealing the key role of molecular packing on interface spin polarization at two-dimensional limit in spintronic devices.

Understanding spinterfaces between magnetic metals and organic semiconductors is essential to unlock the great potentials that organic materials host for spintronic applications. Although plenty of efforts have been devoted to studying organic spintronic devices, exploring the role of metal/molecule spinterfaces at two-dimensional limit remains challenging because of excessive disorders and traps at the interfaces. Here, we demonstrate atomically smooth metal/molecule interfaces through nondestructively transferring magnetic electrodes on epitaxial grown single-crystalline layered organic films. Using such high-quality interfaces, we investigate spin injection of spin-valve devices based on organic films of different layers, in which molecules are packed in different manners. We find that the measured magnetoresistance and the estimated spin polarization increase markedly for bilayer devices compared with their monolayer counterparts. These observations reveal the key role of molecular packing on spin polarization, which is supported by density functional theory calculations. Our findings provide promising routes toward designing spinterfaces for organic spintronic devices.

Phase II, Open-Label Study of Ciltacabtagene Autoleucel, an Anti-B-Cell Maturation Antigen Chimeric Antigen Receptor-T-Cell Therapy, in Chinese Patients With Relapsed/Refractory Multiple Myeloma (CARTIFAN-1).

PURPOSE: CARTIFAN-1 aimed to evaluate the efficacy and safety of ciltacabtagene autoleucel (cilta-cel), a B-cell maturation antigen-targeting chimeric antigen receptor T-cell therapy, in Chinese patients with relapsed/refractory multiple myeloma (RRMM). METHODS: This pivotal phase II, open-label study (ClinicalTrials.gov identifier: NCT03758417), conducted across eight sites in China, enrolled adult patients with RRMM who had received ≥ 3 lines of prior therapy, including a proteasome inhibitor and immunomodulatory drug. Patients received a single infusion of cilta-cel (target dose 0.75 × 106 chimeric antigen receptor-positive viable T cells/kg). The primary end point was overall response rate. Secondary end points included progression-free survival (PFS), overall survival (OS), and incidence and severity of adverse events (AEs). RESULTS: As of the clinical cutoff of July 19, 2021, 48 patients received a cilta-cel infusion. At an 18-month median follow-up, the overall response rate was 89.6% (95% CI, 77.3 to 96.5), with a median time to first response of approximately 1 month; 77.1% of patients (95% CI, 62.7 to 88.0) achieved complete response or better. Medians for duration of response, PFS, and OS were not reached. The 18-month PFS and OS rates were 66.8% (95% CI, 49.4 to 79.4) and 78.7% (95% CI, 64.0 to 88.0), respectively. Hematologic AEs were common, including anemia (100%), neutropenia (97.9%), lymphopenia (95.8%), and thrombocytopenia (87.5%). Cytokine release syndrome occurred in 97.9% of patients (35.4% grade 3/4); the median time to onset was 7 days, and the median duration was 5 days. Infections occurred in 85.4% of patients (37.5% grade 3/4). Ten deaths occurred after cilta-cel infusion, eight of which were due to treatment-related AEs. CONCLUSION: These data demonstrate a favorable risk-benefit profile for a single infusion of cilta-cel, resulting in early, deep, and durable responses in heavily pretreated patients with RRMM in China.

Dynamic changes in serum monocyte chemoattractant protein-1, and regulated upon activation, normal T cell expressed and secreted levels in patients with minor intracerebral hemorrhage.

OBJECTIVE: To investigate the time expression profile of serum monocyte chemoattractant protein (MCP)-1, and regulated upon activation, normal T cell expressed and secreted (RANTES) after minor intracerebral hemorrhage (ICH). METHODS: This study was carried out in the Department of Neurology in the Fifth Affiliated Hospital of Sun Yat-Sen University, Zhuhai, China. Fifteen consecutive hospitalized patients with minor ICH were enrolled from July 2008 to December 2008. The patients` serum levels of MCP-1 and RANTES were measured by enzyme-linked immunosorbent assay (ELISA) on days 1-3, 7, 14, and 30 after the onset of ICH, and compared with that of 10 controls. RESULTS: The serum MCP-1 levels increased immediately on days 1-3 (p=0.000) after onset, and then decreased slightly on day 7 (p=0.001), and day 14 (p=0.000); after day 14, the levels continued to increase and reached their highest levels on day 30 (p=0.000). No statistical differences in MCP-1 levels were found between any time points. The RANTES levels at any time point did not differ significantly from the controls. The levels of MCP-1 and RANTES were not correlated with the serum C-reactive protein (CRP) levels, brain hematoma volumes, acute neurologic impairment, or 3-month outcome. CONCLUSION: The persistent elevation of serum MCP-1 levels after minor ICH may contribute to the acute damage and the repair following an ICH.