Interactive effects of dietary leucine and isoleucine on growth, blood parameters, and amino acid profile of Japanese flounder Paralichthys olivaceus.

A 60-day feeding trial was conducted to assess the interactions of dietary leucine (Leu) and isoleucine (Ile) on Japanese flounder. Fish of 2.69 ± 0.04 g were fed experimental diets containing two levels of Leu (2.58 and 5.08% of diet) combined with three levels of Ile (1.44, 2.21, and 4.44% of diet), respectively. After the feeding trial, growth, proximate composition, muscle total amino acid profile, blood parameters, mucus lysozyme activity, and stress tolerance to freshwater were measured. Statistically significant (P < 0.05) interactive effects of Leu and Ile were found on growth parameters (final body weight, body weight gain, and special growth rate) of Japanese flounder. Antagonism was discovered in high dietary Leu groups, while stimulatory effects were obtained for increased dietary Ile in low Leu groups. Interactive effects of these two branched-chain amino acids were also found on hepatosomatic index of test fish. In addition, crude lipid content of fish whole body was significantly altered by various diets, with antagonism observed in low dietary Leu groups. Interactive effects also existed in muscle amino acid profiles for low fish meal diets, but no interactive impacts were observed on blood parameters. Furthermore, lysozyme activities and freshwater stress were significantly affected by different diets. And antagonism was found on lysozyme activities in low Leu groups. Moreover, high Leu and high Ile levels of diet significantly altered freshwater stress tolerance of Japanese flounder. These findings suggested that dietary Leu and Ile can effect interactively, and fish fed with diets containing 2.58% Leu with 4.44% Ile and 5.08% Leu with 1.44% Ile showed better growth performance.

Facile fabrication of an Au/Cu bimetallic nanocluster-based fluorescent composite film for sensitive and selective detection of Cr(VI).

To overcome the disadvantage of simple bimetallic nanocluster solutions being difficult to store and utilize, we prepared and obtained a novel gold and copper bimetallic nanocluster-doped chitosan fluorescent composite film. In this study, gold and copper bimetallic nanoclusters emitting strong red fluorescence were first synthesized by a chemical reduction method. Subsequently, a novel gold and copper bimetallic nanocluster-doped chitosan fluorescent composite film was successfully prepared by a solution casting method. After 60 minutes of UV light irradiation or 30 days at room temperature, the relative fluorescence intensity values of the composite film decreased by 0.9% and 1.2%, respectively. This indicates that its optical properties are stable and that it can be stored for a long time. The composite film has strong and bright red fluorescence and can be used as a fluorescent probe to achieve real-time detection of Cr(VI). It also has a low detection limit for Cr(VI) (0.26 ppb), so it can be applied to the detection of Cr(VI) in actual water samples and get satisfactory detection results. Due to its portability, high selectivity, and high sensitivity, it can also be extended to chemical and food detection.

Multi-Response Optimisation of Automotive Door Using Grey Relational Analysis with Entropy Weights.

Tail-welded blanks (TWBs) are widely used in automotive bodies to improve the structural performance and reduce weight. The stiffness and modal lightweight design optimisation of TWBs for automotive doors was performed in this study. The finite element model was validated through physical experiments. An L27 (312) Taguchi orthogonal array was used to collect the sample points. The multi-objective optimisation problem was transformed into a single-objective optimisation problem based on the grey relational degree. The optimal combination of structural design parameters was obtained for a tail-welded door using the proposed method, and the weight of the door structure was reduced by 2.83 kg. The proposed optimisation method has fewer iterations and a lower computational cost, enabling the design of lightweight TWBs.

Durian-Inspired Design of Bismuth-Antimony Alloy Arrays for Robust Sodium Storage.

Sodium-ion batteries have attracted widespread attention for cost-effective and large-scale electric energy storage. However, their practical deployment has been largely retarded by the lack of choice of efficient anode materials featuring large capacity and electrochemical stability and robustness. Herein, we report a durian-inspired design and template-free fabrication of a robust sodium anode based on triangular pyramid arrays of Bi0.75Sb0.25 alloy electrodeposited on Cu substrates. The Bi0.75Sb0.25 arrays exhibit an appreciable electrochemical robustness for sodium storage, sustaining a reversible capability 335 mAh g-1 at a high rate of 2.5 A g-1 and 87% of the initial capacity over 2000 cycles. We further demonstrate the applicability of the Bi0.75Sb0.25 array anode in sodium full cells by pairing it with a Na3V2(PO4)3/C cathode. This full cell achieves a high specific energy of 203 Wh kg-1 (based on both active electrodes). Such an enhanced performance is attributed to the thorny-durian-like architecture and bimetallic alloy composition. The pyramid tip induces ion enrichment for rapid charge-transfer reaction, while the alloy design reduces the electrode volume swelling for stable Na cycling.

Identification of differentially expressed genes in gills of tiger puffer (Takifugu rubripes) in response to low-salinity stress.

Salinity is an important abiotic factor for aquatic organisms. In fish, changes in salinity affect physiological responses and alter the immune system. Takifugu rubripes is an important economic marine fish, and mechanisms of T. rubripes adaptation to salinity changes need to be further documented. In this study, a transcriptome sequencing technique was used to analyse genes that were differentially expressed in the T. rubripes gill after low-salinity stress for 30 d, and differential gene expression was further validated by quantitative real-time PCR (qPCR). After assembly, 385 differentially expressed genes (DEGs) were identified, including 182 upregulated genes and 203 downregulated genes. The DEGs were assigned to Gene Ontology (GO) classes with a total of 1647 functional terms. Most DEGs were assigned to biological process (984; 59.8%) followed by molecular function (445; 27.0%) and cellular component (218; 13.2%). Further KEGG analysis allocated 385 DEGs to 95 KEGG pathways. After q-value correction, 7 pathways (Glycolysis/Gluconeogenesis; Biosynthesis of amino acids; Carbon metabolism; Fructose and mannose metabolism; Pentose phosphate pathway; Metabolism of xenobiotics by cytochrome P450; and Glycine, serine and threonine metabolism) remained significant. qPCR results indicated that the transcripts of six selected genes sharply increased after 30 d of low-salinity stress. Low-salinity stress obviously increased SLC39A6, SLC5A9, NKAα1, CYP1A1, CYP1B1, and GSTA expression. In contrast, the genes encoding Aldoaa, GPI, FBP2 and GAPDH exhibited downregulation. In addition, three solute carrier (SLC) genes selected from the DEGs were further studied for differential expression patterns after low-salinity exposure, and the results showed that the SLCs were upregulated in T. rubripes after 72 h of low-salinity exposure. This investigation provides data for understanding the molecular mechanisms of fish responses to low-salinity stress and provides a reference for rationally setting salinity levels in aquaculture.

Highly Efficient Sodium Storage in Iron Oxide Nanotube Arrays Enabled by Built-In Electric Field.

High-power sodium-ion batteries capable of charging and discharging rapidly and durably are eagerly demanded to replace current lithium-ion batteries. However, poor activity and instable cycling of common sodium anode materials represent a huge barrier for practical deployment. A smart design of ordered nanotube arrays of iron oxide (Fe2 O3 ) is presented as efficient sodium anode, simply enabled by surface sulfurization. The resulted heterostructure of oxide and sulfide spontaneously develops a built-in electric field, which reduces the activation energy and accelerates charge transport significantly. Benefiting from the synergy of ordered architecture and built-in electric field, such arrays exhibit a large reversible capacity, a superior rate capability, and a high retention of 91% up to 200 cycles at a high rate of 5 A g-1 , outperforming most reported iron oxide electrodes. Furthermore, full cells based on the Fe2 O3 array anode and the Na0.67 (Mn0.67 Ni0.23 Mg0.1 )O2 cathode deliver a specific energy of 142 Wh kg-1 at a power density of 330 W kg-1 (based on both active electrodes), demonstrating a great potential in practical application. This material design may open a new door in engineering efficient anode based on earth-abundant materials.

Ultrastable Sodium Storage in MoO3 Nanotube Arrays Enabled by Surface Phosphorylation.

Molybdenum trioxide (MoO3) has been considered as an appealing choice of anode for sodium-ion batteries because of its high theoretical capacity (1117 mA h g-1). However, the large volume change upon Na+ storage results in poor cycling stability and capacity fade of MoO3. Here, we demonstrate a surface phosphorylation strategy to mitigate the degradation of three-dimensional MoO3 array electrodes. Such a phosphorylation strategy allows MoO3 arrays to sustain a capacity of 265 mA h g-1, or ∼90% of the initial value, at a rate of 2 A g-1 over 1500 cycles, outperforming most reported MoO3 electrodes. Moreover, kinetic analysis unveils a capacitance-dominated Na+ storage feature of MoO3 arrays, owing to the enhanced electron mobility imparted by oxygen vacancies that are simultaneously introduced by phosphorylation. Hence, surface phosphorylation might offer new possibilities to bypass multiple materials challenges facing current sodium electrodes.

Digital gene expression analysis of Takifugu rubripes brain after acute hypoxia exposure using next-generation sequencing.

The adverse effects of hypoxia are confined to biochemical, physiological, developmental and behavioral processes, especially injury of the brain. In this study, a subset of genes in the brain of Takifugu rubripes were analyzed using digital gene expression (DGE) profiles and next-generation sequencing after acute hypoxia. Among 32 differentially expressed genes, 29 were up-regulated and 3 were down-regulated following hypoxia exposure. Using Gene Ontology analysis, it was found that transcription and translation, metabolism, and the stress response were affected by exposure to hypoxia. KEGG analysis revealed that the neuroactive ligand-receptor interaction pathway was significantly enriched in hypoxia-exposed T. rubripes. To further confirm the differential expression of genes, quantitative real-time PCR was performed to test six candidate genes, with the following five genes exhibiting the same expression patterns as the sequencing results: Proto-oncogene c-fos, Kruppel-like factor 2, immediate early response 2, proopiomelanocortin A and rhodopsin. This work is the first to identify and annotate genes in T. rubripes affected by hypoxia stress. This investigation provides data for understanding the molecular mechanism of fish adaptation to hypoxia and provides a reference for rationally setting dissolved oxygen levels in aquaculture.