Tumor Targeting and pH-Sensitive Inclusion Complex Based on HP-ß-CD as a Potential Carrier for Paclitaxel: Fabrication, Molecular Docking, and Characterization.

In this study, a tumor-targeting and pH-sensitive inclusion complex based on the host-guest recognition between the chitosan and folic acid grafted HP-ß-CD (FA-CS-CD) and stearic acid modified 2-benzimidazolemethanol (BM-SA) was designed and fabricated for the controlled delivery of paclitaxel (PTX). Through the combination of computational simulations and experiments, the interaction between FA-CS-CD, BM-SA, and PTX was investigated, and the optimized preparation method was obtained. For the optimized PTX-loaded FA-CS-CD/BM-SA inclusion complex, the particle size and zeta potential were 146 nm and +15.4 mV, respectively. In vitro drug release study revealed the pH-triggered drug release behavior of the inclusion complex. Both in vitro and in vivo evaluations demonstrated that the PTX-loaded FA-CS-CD/BM-SA inclusion complex exhibited enhanced antitumor efficiency and minimized systemic toxicity. This system might be a promising carrier for PTX.

AIE-Featured Redox-Sensitive Micelles for Bioimaging and Efficient Anticancer Drug Delivery.

In the present study, an amphiphilic polymer was prepared by conjugating methoxy poly(ethylene glycol) (mPEG) with tetraphenylethene (TPE) via disulfide bonds (Bi(mPEG-S-S)-TPE). The polymer could self-assemble into micelles and solubilize hydrophobic anticancer drugs such as paclitaxel (PTX) in the core. Combining the effect of TPE, mPEG, and disulfide bonds, the Bi(mPEG-S-S)-TPE micelles exhibited excellent AIE feature, reduced protein adsorption, and redox-sensitive drug release behavior. An in vitro intracellular uptake study demonstrated the great imaging ability and efficient internalization of Bi(mPEG-S-S)-TPE micelles. The excellent anticancer effect and low systemic toxicity were further evidenced by the in vivo anticancer experiment. The Bi(mPEG-S-S)-TPE micelles were promising drug carriers for chemotherapy and bioimaging.

A pH-Sensitive Polymeric Micellar System Based on Chitosan Derivative for Efficient Delivery of Paclitaxel.

In this study, an amphiphilic conjugate based on mPEG and cholesterol-modified chitosan with hydrazone bonds in the molecules (mPEG-CS-Hz-CH) was successfully synthesized. Using the polymer as the carrier, the paclitaxel (PTX)-loaded mPEG-CS-Hz-CH micelles were prepared by an ultrasonic probe method. The mean particle size and zeta potential of the optimized PTX-loaded micelles were 146 ± 4 nm and +21.7 ± 0.7 mV, respectively. An in vitro drug release study indicated that the PTX-loaded mPEG-CS-Hz-CH micelles were stable under normal physiological conditions (pH 7.4), whereas rapid drug release was observed in the simulated tumor intracellular microenvironment (pH 5.0). An in vitro cytotoxicity study demonstrated the non-toxicity of the polymer itself, and the PTX-loaded micelles exhibited superior cytotoxicity and significant selectivity on tumor cells. An in vivo antitumor efficacy study further confirmed that the PTX-loaded micelles could improve the therapeutic efficacy of PTX and reduce the side effects. All these results suggested that the mPEG-CS-Hz-CH micelles might be promising pH-sensitive nanocarriers for PTX delivery.

Amphiphilic Polymeric Micelles Based on Deoxycholic Acid and Folic Acid Modified Chitosan for the Delivery of Paclitaxel.

The present investigation aimed to develop a tumor-targeting drug delivery system for paclitaxel (PTX). The hydrophobic deoxycholic acid (DA) and active targeting ligand folic acid (FA) were used to modify water-soluble chitosan (CS). As an amphiphilic polymer, the conjugate FA-CS-DA was synthesized and characterized by Proton nuclear magnetic resonance (¹H-NMR) and Fourier-transform infrared spectroscopy (FTIR) analysis. The degree of substitutions of DA and FA were calculated as 15.8% and 8.0%, respectively. In aqueous medium, the conjugate could self-assemble into micelles with the critical micelle concentration of 6.6 × 10-3 mg/mL. Under a transmission electron microscope (TEM), the PTX-loaded micelles exhibited a spherical shape. The particle size determined by dynamic light scattering was 126 nm, and the zeta potential was +19.3 mV. The drug loading efficiency and entrapment efficiency were 9.1% and 81.2%, respectively. X-Ray Diffraction (XRD) analysis showed that the PTX was encapsulated in the micelles in a molecular or amorphous state. In vitro and in vivo antitumor evaluations demonstrated the excellent antitumor activity of PTX-loaded micelles. It was suggested that FA-CS-DA was a safe and effective carrier for the intravenous delivery of paclitaxel.

Polymeric Micelles Based on Modified Glycol Chitosan for Paclitaxel Delivery: Preparation, Characterization and Evaluation.

Amphiphilic polymer of α-tocopherol succinate modified glycol chitosan (TS-GC) was successfully constructed by conjugating α-tocopherol succinate to the skeleton of glycol chitosan and characterized by Fourier-transform infrared (FT-IR) and proton nuclear magnetic resonance (¹H-NMR). In aqueous milieu, the conjugates self-assembled to micelles with the critical aggregation concentration of 7.2 × 10−3 mg/mL. Transmission electron microscope (TEM) observation and dynamic light scattering (DLS) measurements were carried out to determine the physicochemical properties of the micelles. The results revealed that paclitaxel (PTX)-loaded TS-GC micelles were spherical in shape. Moreover, the PTX-loaded micelles showed increased particle sizes (35 nm vs. 142 nm) and a little reduced zeta potential (+19 mV vs. +16 mV) compared with blank micelles. The X-ray diffraction (XRD) spectra demonstrated that PTX existed inside the micelles in amorphous or molecular state. In vitro and in vivo tests showed that the PTX-loaded TS-GC micelles had advantages over the Cremophor EL-based formulation in terms of low toxicity level and increased dose, which suggested the potential of the polymer as carriers for PTX to improve their delivery properties.

Multifunctional Composite Microcapsules for Oral Delivery of Insulin.

In this study, we designed and developed a new drug delivery system of multifunctional composite microcapsules for oral administration of insulin. Firstly, in order to enhance the encapsulation efficiency, insulin was complexed with functional sodium deoxycholate to form insulin-sodium deoxycholate complex using hydrophobic ion pairing method. Then the complex was encapsulated into poly(lactide-co-glycolide) (PLGA) nanoparticles by emulsion solvent diffusion method. The PLGA nanoparticles have a mean size of 168 nm and a zeta potential of -29.2 mV. The encapsulation efficiency was increased to 94.2% for the complex. In order to deliver insulin to specific gastrointestinal regions and reduce the burst release of insulin from PLGA nanoparticles, hence enhancing the bioavailability of insulin, enteric targeting multifunctional composite microcapsules were further prepared by encapsulating PLGA nanoparticles into pH-sensitive hydroxypropyl methyl cellulose phthalate (HP55) using organic spray-drying method. A pH-dependent insulin release profile was observed for this drug delivery system in vitro. All these strategies help to enhance the encapsulation efficiency, control the drug release, and protect insulin from degradation. In diabetic fasted rats, administration of the composite microcapsules produced a great enhancement in the relative bioavailability, which illustrated that this formulation was an effective candidate for oral insulin delivery.

AIE luminogen labeled polymeric micelles for biological imaging and chemotherapy.

In this study, an amphiphilic polymer FA-CS-DBA-CHO with aggregation-induced emission (AIE) feature was prepared by introducing 4-(diphenylamino)benzaldehyde derivative (DBA-CHO), imine bond and folic acid (FA) to the molecular structure of chitosan (CS). The amphiphilicity drove the polymer to self-assemble into micelles, and paclitaxel (PTX) could be solubilized in the hydrophobic core. Due to the excellent AIE effect, FA-CS-DBA-CHO exhibited strong cellular imaging capability. The pH-sensitive imine bond in the polymer allowed for accurate drug release in acidic environment. Both in vitro and in vivo studies demonstrated that the PTX-loaded FA-CS-DBA-CHO micelles could significantly inhibit the growth of tumor cells but without any notable toxicity. This micellar system was excellent carrier for bioimaging and chemotherapeutic drug delivery.

A strategy for the improvement of the bioavailability and antiosteoporosis activity of BCS IV flavonoid glycosides through the formulation of their lipophilic aglycone into nanocrystals.

Epimedium-derived flavonoid glycosides are widely used for the prevention of osteoporosis, but these compounds generally exhibit poor membrane permeability and oral absorption. To address these limitations, the bioactive lipophilic aglycone icaritin (ICT) was selected and successfully developed into nanocrystals (ICTN) through the antisolvent-precipitation method. After the parameters in the preparation of ICTN were optimized, the morphology, crystallinity, adsorption of the stabilizers on the ICT surface, and the dissolution of the resulting nanocrystals were characterized. The pharmacokinetics in rat and the in vitro antiosteoporosis activity of serum withdrawn after the oral administration of ICTN to rats on mouse osteoblastic cells were evaluated. Consistent with its good performance in stabilizing the ICT nanosuspension, atomic force microscopy showed that hydroxypropyl methylcellulose (HPMC) exhibits better adsorption on the ICT surface compared with other stabilizers. Needle-shaped crystals (∼ 220 nm in diameter) with a high drug loading (∼ 90%) were generated when 0.16 mL of the ICT acetone solution (10 mg/mL) was injected quickly into 2 mL of the HPMC solution (0.02%, w/w) under ultrasonication for 10 s at room temperature. The thermal analysis demonstrated that the majority of the particles are in their crystalline forms, similarly to the unformulated ICT. After oral administration, ICTN exhibited a faster dissolution rate and significantly faster absorption, as supported by the increased AUC0-36h and Cmax and the reduced Tmax of these nanocrystals compared with the raw suspension (p < 0.05). Compared with blank serum, enhanced proliferation and differentiation activities were observed when serum withdrawn after the oral administration of ICTN in rat was incubated with osteoblast MC3T3-E1 cells. The present delivery system could provide a new promising strategy for BCS IV glycoside of flavonoids or other natural products by formulation of their bioactive lipophilic aglycone forms to enhance oral absorption and in vivo bioactivity.

[3D interactive clipping technology in medical image processing].

The aim of this paper is to study the methods of 3D visualization and the 3D interactive clipping of CT/MRI image sequence in arbitrary orientation based on the Visualization Toolkit (VTK). A new method for 3D CT/MRI reconstructed image clipping is presented, which can clip 3D object and 3D space of medical image sequence to observe the inner structure using 3D widget for manipulating an infinite plane. Experiment results show that the proposed method can implement 3D interactive clipping of medical image effectively and get satisfied results with good quality in short time.

Sulfur dioxide-releasing polymeric micelles based on modified hyaluronic acid for combined cancer therapy.

In this study, an amphiphilic polymer mPEG-HA(SA)-DNs was designed and synthesized to fabricate a multifunctional micellar system to enhance the therapeutic efficacy and reduce the toxic effect of paclitaxel (PTX). The polymer was prepared by introducing mPEG, stearic acid (SA) and 2,4-dinitrobenzenesulfonic acid (DNs) to the backbone of hyaluronic acid (HA). With above modifications, the fabricated micelles could encapsulate PTX in the core with high drug loading. The optimized PTX-loaded micelles had a mean size of 158.3 nm. Upon the effect of mPEG, the mPEG-HA(SA)-DNs micelles reduced the non-specific protein adsorption. In vitro drug release study revealed the excellent glutathione (GSH)-triggered PTX release behavior of the micelles. Moreover, GSH could trigger the detachment of DNs segment from mPEG-HA(SA)-DNs, and result in the release of SO2. In vitro and in vivo antitumor efficacy studies demonstrated that the PTX-loaded mPEG-HA(SA)-DNs micelles exhibited outstanding tumor suppression effect. The micelles would be potential carriers for combination cancer therapy by SO2 and PTX.

Polymer-mediated anti-solvent crystallization of nitrendipine: monodispersed spherical crystals and growth mechanism.

PURPOSE: To investigate anti-solvent crystallization and growth mechanism of nitrendipine spherical crystals in an aqueous solution containing polymeric additives. METHODS: Size and shape of crystals were investigated using laser diffractometry, optical microscopy and scanning electron microscopy (SEM). Crystalline form was determined by X-ray powder diffractometer (XRPD). During crystal growth, morphological changes at different time points were observed using SEM. RESULTS: Morphology of nitrendipine crystals was affected by polymers and temperature. Monodispersed micro-spherical crystals were obtained when polyvinyl alcohol (PVA) and PEG 200 were present in crystallization medium at 2°C. During crystallization, large number of amorphous nanoparticles was first observed, followed by aggregation into a core for spherical crystals. Once crystalline state was achieved, rapid growth on core surface was observed with amorphous particles acting as a reservoir allowing formation of star-like particles with needle-like subunits. Spherical crystals were formed by filling the gap between needle-like distinct crystalline units of star-like templates with molecules from dissolved amorphous particles. CONCLUSIONS: Monodispersed nitrendipine spherical crystals were obtained using carefully controlled conditions. A mechanism for the nitrendipine spherical crystal growth is suggested. These findings provide a new insight into spherulitic crystallization of active pharmaceutical ingredients.

[Simultaneous determination and optimization of extraction process of catalpol and acteoside from rehmanniae radix].

OBJECTIVE: To establish a method for simultaneously quantification of the Catalpol and Acteoside from Rehmanniae Radix and optimize the extraction process from Rehmanniae Radix by response surface methodology (RSM) using central composite design (CCD). METHODS: The effect of ethanol concentration and the solvent-material ratio of the extraction were investigated on the overall extraction efficiency. Design Expert was used for regression analysis and determination coefficient of the regression equation. RESULTS: A good linear relationship was obtained from 0.047 - 3.00 microg and 0.016 - 1.00 microg for Catalpol and Acteoside, respectively. The optimal condition of extraction process was as follows: raw material was extracted with 19.3 mL/g solvent-material ratio of 38.0% ethanol. The R-Squared of binomial fitting of the complex model was 0.7498 (P < 0.05). The experimental values were accordance with values obtained from model prediction. CONCLUSION: The accuracy and precision of the developed HPLC protocol is adequate for simultaneous quantification of Catalpol and Acteoside in Rehmanniae Radix. The optimized extraction condition could be obtained by RSM using CCD.

Design and fabrication of chitosan-based AIE active micelles for bioimaging and intelligent delivery of paclitaxel.

In this study, cetyl 4-formylbenzoate alkyl and 4-(2-hydroxyethoxy) benzophenonesalicylaldazide modified biotinylated chitosan (CS-BT-HBS-CB) featured with aggregation-induced emission (AIE) characteristic, active tumor-targeting ability and pH-responsive drug release property was designed and synthesized. The polymer was fabricated by introducing hydrophobic segment, tumor targeting ligand, acid-sensitive bond and AIE fluorophore to the backbone of chitosan. Due to its amphiphilicity, the polymer could self-assemble into micelles and encapsulate paclitaxel (PTX) to form PTX-loaded CS-BT-HBS-CB micelles. The mean size of the micelles was 167 nm, which was beneficial to the EPR effect. Moreover, with the help of above functional groups, the micelles exhibited excellent AIE effect, triggered drug release behavior by acidic condition, selective internalization by MCF-7 cells and excellent cellular imaging capability. In vivo studies revealed that the PTX-loaded CS-BT-HBS-CB micelles could enhance the antitumor efficacy with low systemic toxicity. This micellar system would be a potential candidate for cancer therapy and bioimaging.

Whole exome sequencing in Brugada and long QT syndromes revealed novel rare and potential pathogenic mutations related to the dysfunction of the cardiac sodium channel.

BACKGROUND: Brugada syndrome (Brs) and long QT syndrome (LQTs) are the most observed "inherited primary arrhythmia syndromes" and "channelopathies", which lead to sudden cardiac death. METHODS: Detailed clinical information of Brs and LQTs patients was collected. Genomic DNA samples of peripheral blood were conducted for whole-exome sequencing on the Illumina HiSeq 2000 platform. Then, we performed bioinformatics analysis for 200 genes susceptible to arrhythmias and cardiomyopathies. Protein interaction and transcriptomic co-expression were analyzed using the online website and GTEx database. RESULTS: All sixteen cases of Brs and six cases of LQTs were enrolled in the current study. Four Brs carried known pathogenic or likely pathogenic of single-point mutations, including SCN5A p.R661W, SCN5A p.R965C, and KCNH2 p.R692Q. One Brs carried the heterozygous compound mutations of DSG2 p.F531C and SCN5A p.A1374S. Two Brs carried the novel heterozygous truncated mutations (MAF < 0.001) of NEBL (p.R882X) and NPPA (p.R107X), respectively. Except for the indirect interaction between NEBL and SCN5A, NPPA directly interacts with SCN5A. These gene expressions had a specific and significant positive correlation in myocardial tissue, with high degrees of co-expression and synergy. Two Brs carried MYH7 p.E1902Q and MYH6 p.R1820Q, which were predicted as "damaging/possibly damaging" and "damaging/damaging" by Polyphen and SIFT algorithm. Two LQTs elicited the pathogenic single splicing mutation of KCNQ1 (c.922-1G > C). Three LQTs carried a single pathogenic mutation of SCN5A p.R1880H, KCNH2 p.D161N, and KCNQ1 p.R243S, respectively. One patient of LQTs carried a frameshift mutation of KCNH2 p. A188Gfs*143. CONCLUSIONS: The truncated mutations of NEBL (p.R882X) and NPPA (p.R107X) may induce Brugada syndrome by abnormally affecting cardiac sodium channel. SCN5A (p.R661W, p.R965C and p.A1374S) and KCNH2 (p.R692Q) may cause Brugada syndrome, while SCN5A (p.R1880H), KCNQ1 (c.922-1G > C and p.R243S) and KCNH2 (p.D161N and p.A188Gfs*143) may lead to long QT syndrome.

Inclusion complex based on N-acetyl-L-cysteine and arginine modified hydroxypropyl-ß-cyclodextrin for oral insulin delivery.

Insulin is the most effective drug in the treatment of diabetes mellitus. At present, subcutaneous injection is still the common way for insulin delivery. However, oral delivery is considered as the most preferred way for its high patient compliance and the minimal invasiveness. In this study, a novel N-acetyl-L-cysteine and arginine modified hydroxypropyl-ß-cyclodextrin (NAC-HP-ß-CD-Arg) was successfully synthesized and characterized. The polymer was used as a carrier for oral delivery of insulin by forming NAC-HP-ß-CD-Arg@insulin complex. Enzymatic degradation study indicated that the NAC-HP-ß-CD-Arg could protect insulin from enzymolysis. Moreover, the polymer exhibited strong binding ability with mucin. The transportation efficiency of NAC-HP-ß-CD-Arg@insulin across the Caco-2 cell monolayer was much greater than free insulin. The in vivo study demonstrated that the orally administered NAC-HP-ß-CD-Arg@insulin exhibited an excellent and sustained hypoglycemic effect in diabetic rats. It can be concluded that the NAC-HP-ß-CD-Arg is a potential carrier for oral delivery of insulin.

AIE-active polymeric micelles based on modified chitosan for bioimaging-guided targeted delivery and controlled release of paclitaxel.

In this study, a novel polymer based on aggregation-induced emission (AIE) fluorogen, biotin and disulfide bonds modified chitosan (TPE-bi(SS-CS-Bio)) was designed and synthesized. The polymer could self-assemble into micelles in aqueous media and encapsulate paclitaxel (PTX) into the core with high drug loading. Fluorescence study indicated that the micelles exhibited excellent AIE feature with intense blue fluorescence emitted. In vitro drug release study indicated that the micelles could disassemble rapidly in the presence of high level of glutathione. The modification by biotin could enhance the cellular uptake of the micelles. The drug-loaded micelles possessed remarkable cytotoxicity against MCF-7 cells, and their distribution in the cells could be traced due to the excellent AIE feature. In vivo antitumor efficacy study demonstrated the superior antitumor activity of the PTX-loaded TPE-bi(SS-CS-Bio) micelles. These results indicated that TPE-bi(SS-CS-Bio) has the ability of biological imaging and can be used as a potential carrier for PTX.

Insulin-S.O (sodium oleate) complex-loaded PLGA nanoparticles: formulation, characterization and in vivo evaluation.

S.O (sodium oleate) is an anionic surfactant, which is able to forman ionic complex with positively charged insulin at suitable pH. In a previous study, the insulin-S.O (Ins-S.O) complex was prepared by a hydrophobic ion pairing (HIP) method to improve the apparent liposolubility of insulin. The formation of the complex was further confirmed by Zeta potential and X-ray method. Based on the preliminary study, poly(lactide-co-glycolide) (PLGA) nanoparticles harbouring Ins-S.O complex was prepared via an emulsion solvent diffusion method. The effects of key parameters such as concentration of PVA, concentration of PLGA and initial-loaded drug on the properties of the nanoparticles were investigated. The insulin encapsulation efficiency (EE(%)) reached up to 91.2% and mean diameter of the nanoparticles was sized approximately 160 nm under optimal conditions. The pharmacological effects of the nanoparticles made of PLGA (75/25, Av Mw 15,000) were further evaluated to confirm their potential suitability for oral delivery. In order to evaluate hyperglycaemic effect of the nanoparticles for oral administration, Ins-S.O complex-loaded PLGA nanoparticles (20 IU/Kg) were administered orally by force-feeding to diabetic rats. In the case of the nanoparticles, the plasma glucose level reduced to 23.85% from the initial one 12 h post-administration and this continued for 24 h. The results showed that the use of Ins-S.O complex-loaded PLGA nanoparticles is an effective method of reducing plasma glucose levels. The insulin nanoparticles also improved the glycaemic response to an oral glucose challenge.

ASDmiR: A Stepwise Method to Uncover miRNA Regulation Related to Autism Spectrum Disorder.

Autism spectrum disorder (ASD) is a class of neurodevelopmental disorders characterized by genetic and environmental risk factors. The pathogenesis of ASD has a strong genetic basis, consisting of rare de novo or inherited variants among a variety of multiple molecules. Previous studies have shown that microRNAs (miRNAs) are involved in neurogenesis and brain development and are closely associated with the pathogenesis of ASD. However, the regulatory mechanisms of miRNAs in ASD are largely unclear. In this work, we present a stepwise method, ASDmiR, for the identification of underlying pathogenic genes, networks, and modules associated with ASD. First, we conduct a comparison study on 12 miRNA target prediction methods by using the matched miRNA, lncRNA, and mRNA expression data in ASD. In terms of the number of experimentally confirmed miRNA-target interactions predicted by each method, we choose the best method for identifying miRNA-target regulatory network. Based on the miRNA-target interaction network identified by the best method, we further infer miRNA-target regulatory bicliques or modules. In addition, by integrating high-confidence miRNA-target interactions and gene expression data, we identify three types of networks, including lncRNA-lncRNA, lncRNA-mRNA, and mRNA-mRNA related miRNA sponge interaction networks. To reveal the community of miRNA sponges, we further infer miRNA sponge modules from the identified miRNA sponge interaction network. Functional analysis results show that the identified hub genes, as well as miRNA-associated networks and modules, are closely linked with ASD. ASDmiR is freely available at https://github.com/chenchenxiong/ASDmiR.

A Chitosan-Based Micellar System as Nanocarrier For the Delivery of Paclitaxel.

In this study, a redox-sensitive chitosan derivative with modifications by cholesterol, sulfhydryl, and mPEG (mPEG-CS(SH)-CHO) was successfully synthesized and characterized. Due to its amphiphilicity, the conjugate could spontaneously form micelles in an aqueous environment. The optimized paclitaxel (PTX)-loaded mPEG-CS(SH)-CHO micelles, with a mean diameter of 158 nm, zeta potential of +26.9 mV, drug loading of 11.7%, and entrapment efficiency of 88.3%, were successfully prepared. The results of an XRD study demonstrated that PTX was loaded in the core of the micelles in a non-crystalline state. Inspiringly, the PTX-loaded micelles possessed excellent anticancer effect but low toxicity to the body. It can be concluded that the mPEG-CS(SH)-CHO micellar system is a promising drug delivery carrier for the controlled release of PTX.

Biotin and arginine modified hydroxypropyl-ß-cyclodextrin nanoparticles as novel drug delivery systems for paclitaxel.

A novel biotin and arginine modified hydroxypropyl-ß-cyclodextrin (biotin-Arg(pbf)-HP-ß-CD) was successfully synthesized. The hydroxyl groups of HP-ß-CD on the primary faces were coupled with carboxyl groups of biotin using arginine as the functional spacer. Using biotin-Arg(pbf)-HP-ß-CD as the carrier, paclitaxel (PTX)-loaded nanoparticles were developed by modified emulsion solvent evaporation method. The optimized PTX-loaded biotin-Arg(pbf)-HP-ß-CD nanoparticles had a mean diameter of 121.9 nm and zeta potential of -57.7 mV. Transmission electron microscopy (TEM) observation revealed that the nanoparticles were spherical in shape. XRD spectra confirmed the successful encapsulation of PTX. Moreover, in vitro and in vivo evaluations were performed to demonstrate the superior antitumor activity of the PTX-loaded nanoparticles. The cellular uptake study demonstrated the biotin receptor-mediated endocytosis of biotin-Arg(pbf)-HP-ß-CD nanoparticles and the increase of cellular uptake by introduction of biotin and arginine. It can be concluded that the biotin-Arg(pbf)-HP-ß-CD nanoparticles are efficient tumor-targeting drug delivery systems for PTX.