Design and synthesis of multigrain nanocrystals via geometric misfit strain.

The impact of topological defects associated with grain boundaries (GB defects) on the electrical, optical, magnetic, mechanical and chemical properties of nanocrystalline materials1,2 is well known. However, elucidating this influence experimentally is difficult because grains typically exhibit a large range of sizes, shapes and random relative orientations3-5. Here we demonstrate that precise control of the heteroepitaxy of colloidal polyhedral nanocrystals enables ordered grain growth and can thereby produce material samples with uniform GB defects. We illustrate our approach with a multigrain nanocrystal comprising a Co3O4 nanocube core that carries a Mn3O4 shell on each facet. The individual shells are symmetry-related interconnected grains6, and the large geometric misfit between adjacent tetragonal Mn3O4 grains results in tilt boundaries at the sharp edges of the Co3O4 nanocube core that join via disclinations. We identify four design principles that govern the production of these highly ordered multigrain nanostructures. First, the shape of the substrate nanocrystal must guide the crystallographic orientation of the overgrowth phase7. Second, the size of the substrate must be smaller than the characteristic distance between the dislocations. Third, the incompatible symmetry between the overgrowth phase and the substrate increases the geometric misfit strain between the grains. Fourth, for GB formation under near-equilibrium conditions, the surface energy of the shell needs to be balanced by the increasing elastic energy through ligand passivation8-10. With these principles, we can produce a range of multigrain nanocrystals containing distinct GB defects.

Carbon Shell on Active Nanocatalyst for Stable Electrocatalysis.

Electrocatalysis is a key process for renewable energy conversion and fuel production in future energy systems. Various nanostructures have been investigated to optimize the electrocatalytic activity and realize efficient energy use. However, the long-term stability of electrocatalysts is also crucial for the sustainable and reliable operation of energy devices. Nanocatalysts are degraded by various processes during electrocatalysis, which causes critical performance loss. Recent operando analyses have revealed the mechanisms of electrocatalyst failure, and specific structures have been identified as robust against degradation. Nevertheless, achieving both high activity and robust stability with the same nanostructure is challenging because the structure-property relationships that affect activity and stability are different. The optimization of electrocatalysis is often limited by a large trade-off between activity and stability in catalyst structures. Therefore, it is essential to introduce functional structural units into catalyst design to achieve electrochemical stability while preserving high activity.In this Account, we highlight the strategic use of carbon shells on catalyst surfaces to improve the stability during electrocatalysis. For this purpose, we cover three issues in the use of carbon-shell-encapsulated nanoparticles (CSENPs) as robust and active electrocatalysts: the origin of the improved stability, the identification of active sites, and synthetic routes. Carbon shells can shield catalyst surfaces from both (electro)chemical oxidation and physical agglomeration. By limiting the exposure of the catalyst surface to an oxidizing (electro)chemical environment, carbon shells can preserve the initial active site structure during electrocatalysis. In addition, by providing a physical barrier between nanoparticles, carbon shells can maintain the high surface area of CSENPs by reducing particle agglomeration during electrocatalysis. This barrier effect is also useful for constructing more active or durable structures by annealing without surface area loss. Compared to the clear stabilizing effect, however, the effect of the shell on active sites on the CSENP surface can be puzzling. Even when they are covered by a carbon shell that can block molecular adsorption on active sites, CSENP catalysts remain active and even exhibit unique catalytic behavior. Thus, we briefly cover recent efforts to identify major active sites on CSENPs using molecular probes. Furthermore, considering the membranelike role of the carbon shell, we suggest several remaining issues that should be resolved to obtain a fundamental understanding of CSENP design. Finally, we describe two synthetic approaches for the successful carbon shell encapsulation of nanoparticles: two-step and one-step syntheses. Both the postmortem coating of nanocatalysts (two-step) and the in situ formation via precursor ligands (one step) are shown to produce a durable carbon layer on nanocatalysts in a controlled manner. The strengths and limitations of each approach are also presented to promote the further investigation of advanced synthesis methods.The hybrid structure of CSENPs, that is, the active catalyst surface and the durable carbon shell, provides an interesting opportunity in electrocatalysis. However, our understanding of CSENPs is still highly limited, and further investigation is needed to answer fundamental questions regarding both active site identification and the mechanisms of stability improvement. Only when we start to comprehend the fundamental mechanisms underlying electrocatalysis on CSENPs will electrocatalysts be further improved for sustainable long-term device operation.

Differences in the Electrochemical Performance of Pt-Based Catalysts Used for Polymer Electrolyte Membrane Fuel Cells in Liquid Half- and Full-Cells.

A substantial amount of research effort has been directed toward the development of Pt-based catalysts with higher performance and durability than conventional polycrystalline Pt nanoparticles to achieve high-power and innovative energy conversion systems. Currently, attention has been paid toward expanding the electrochemically active surface area (ECSA) of catalysts and increase their intrinsic activity in the oxygen reduction reaction (ORR). However, despite innumerable efforts having been carried out to explore this possibility, most of these achievements have focused on the rotating disk electrode (RDE) in half-cells, and relatively few results have been adaptable to membrane electrode assemblies (MEAs) in full-cells, which is the actual operating condition of fuel cells. Thus, it is uncertain whether these advanced catalysts can be used as a substitute in practical fuel cell applications, and an improvement in the catalytic performance in real-life fuel cells is still necessary. Therefore, from a more practical and industrial point of view, the goal of this review is to compare the ORR catalyst performance and durability in half- and full-cells, providing a differentiated approach to the durability concerns in half- and full-cells, and share new perspectives for strategic designs used to induce additional performance in full-cell devices.

Facet-Defined Strain-Free Spinel Oxide for Oxygen Reduction.

Exposing facet and surface strain are critical factors affecting catalytic performance but unraveling the composition-dependent activity on specific facets under strain-controlled environment is still challenging due to the synthetic difficulties. Herein, we achieved a (001) facet-defined Co-Mn spinel oxide surface with different surface compositions using epitaxial growth on Co3O4 nanocube template. We adopted composition gradient synthesis to relieve the strain layer by layer, minimizing the surface strain effect on catalytic activity. In this system, experimental and calculational analyses of model oxygen reduction reaction (ORR) activity reveals a volcano-like trend with Mn/Co ratios because of an adequate charge transfer from octahedral-Mn to neighboring Co. Co0.5Mn0.5 as an optimized Mn/Co ratio exhibits both outstanding ORR activity (0.894 V vs RHE in 1 M KOH) and stability (2% activity loss against chronoamperometry). By controlling facet and strain, this study provides a well-defined platform for investigating composition-structure-activity relationships in electrocatalytic processes.

Surface Electrochemistry of Carbon Electrodes and Faradaic Reactions in Capacitive Deionization.

Recent advances in electrochemical desalination techniques have paved way for utilization of saline water. In particular, capacitive deionization (CDI) enables removal of salts with high energy efficiency and economic feasibility, while its applicability has been challenged by degradation of carbon electrodes in long-term operations. Herein, we report a thorough investigation on the surface electrochemistry of carbon electrodes and Faradaic reactions that are responsible for stability issues of CDI systems. By using bare and membrane CDI (MCDI) as model systems, we identified various electrochemical reactions of carbon electrodes with water or oxygen, with thermodynamics and kinetics governed by the electrode potential and pH. As a result, a complete overview of the Faradaic reactions taking place in CDI was constructed by tracing the physicochemical changes occurring in CDI and MCDI systems.

Atomic-level tuning of Co-N-C catalyst for high-performance electrochemical H2O2 production.

Despite the growing demand for hydrogen peroxide it is almost exclusively manufactured by the energy-intensive anthraquinone process. Alternatively, H2O2 can be produced electrochemically via the two-electron oxygen reduction reaction, although the performance of the state-of-the-art electrocatalysts is insufficient to meet the demands for industrialization. Interestingly, guided by first-principles calculations, we found that the catalytic properties of the Co-N4 moiety can be tailored by fine-tuning its surrounding atomic configuration to resemble the structure-dependent catalytic properties of metalloenzymes. Using this principle, we designed and synthesized a single-atom electrocatalyst that comprises an optimized Co-N4 moiety incorporated in nitrogen-doped graphene for H2O2 production and exhibits a kinetic current density of 2.8 mA cm-2 (at 0.65 V versus the reversible hydrogen electrode) and a mass activity of 155 A g-1 (at 0.65 V versus the reversible hydrogen electrode) with negligible activity loss over 110 hours.

Direct Synthesis of Intermetallic Platinum-Alloy Nanoparticles Highly Loaded on Carbon Supports for Efficient Electrocatalysis.

Compared to nanostructured platinum (Pt) catalysts, ordered Pt-based intermetallic nanoparticles supported on a carbon substrate exhibit much enhanced catalytic performance, especially in fuel cell electrocatalysis. However, direct synthesis of homogeneous intermetallic alloy nanocatalysts on carbonaceous supports with high loading is still challenging. Herein, we report a novel synthetic strategy to directly produce highly dispersed MPt alloy nanoparticles (M = Fe, Co, or Ni) on various carbon supports with high catalyst loading. Importantly, a unique bimetallic compound, composed of [M(bpy)3]2+ cation (bpy = 2,2'-bipyridine) and [PtCl6]2- anion, evenly decomposes on carbon surface and forms uniformly sized intermetallic nanoparticles with a nitrogen-doped carbon protection layer. The excellent oxygen reduction reaction (ORR) activity and stability of the representative reduced graphene oxide (rGO)-supported L10-FePt catalyst (37 wt %-FePt/rGO), exhibiting 18.8 times higher specific activity than commercial Pt/C catalyst without degradation over 20 000 cycles, well demonstrate the effectiveness of our synthetic approach toward uniformly alloyed nanoparticles with high homogeneity.

Operando Identification of the Chemical and Structural Origin of Li-Ion Battery Aging at Near-Ambient Temperature.

Integrated with heat-generating devices, a Li-ion battery (LIB) often operates at 20-40 °C higher than the ordinary working temperature. Although macroscopic investigation of the thermal contribution has shown a significant reduction in the LIB performance, the molecular level structural and chemical origin of battery aging in a mild thermal environment has not been elucidated. On the basis of the combined experiments of the electrochemical measurements, Cs-corrected electron microscopy, and in situ analyses, we herein provide operando structural and chemical insights on how a mild thermal environment affects the overall battery performance using anatase TiO2 as a model intercalation compound. Interestingly, a mild thermal condition induces excess lithium intercalation even at near-ambient temperature (45 °C), which does not occur at the ordinary working temperature. The anomalous intercalation enables excess lithium storage in the first few cycles but exerts severe intracrystal stress, consequently cracking the crystal that leads to battery aging. Importantly, this mild thermal effect is accumulated upon cycling, resulting in irreversible capacity loss even after the thermal condition is removed. Battery aging at a high working temperature is universal in nearly all intercalation compounds, and therefore, it is significant to understand how the thermal condition contributes to battery aging for designing intercalation compounds for advanced battery electrode materials.

Understanding the Behaviors of λ-MnO2 in Electrochemical Lithium Recovery: Key Limiting Factors and a Route to the Enhanced Performance.

Recently developed electrochemical lithium recovery systems, whose operation principle mimics that of lithium-ion battery, enable selective recovery of lithium from source waters with a wide range of lithium ions (Li+) concentrations; however, physicochemical behaviors of the key component-Li+-selective electrode-in realistic operation conditions have been poorly understood. Herein, we report an investigation on a λ-MnO2 electrode during the electrochemical lithium recovery process with regards to the Li+ concentration in source water and operation rate of the system. Three distinctive stages of λ-MnO2 originating from different limiting factors for lithium recovery are defined with regard to the rate of Li+ supply from the electrolyte: depleted, transition, and saturated regions. By characterization of λ-MnO2 at different stages using diverse X-ray techniques, the importance of Li+ concentration in the vicinity of the electrode surface is revealed. On the basis of this understanding, increasing the density of the electrode/electrolyte interface is suggested as a realistic and general route to enhance the overall lithium recovery performance and is experimentally corroborated at a wide range of operation environments.

Design Principle of Fe-N-C Electrocatalysts: How to Optimize Multimodal Porous Structures?

The effect of porous structures on the electrocatalytic activity of N-doped carbon is studied by using electrochemical analysis techniques and the result is applied to synthesize highly active and stable Fe-N-C catalyst for oxygen reduction reaction (ORR). We developed synthetic procedures to prepare three types of N-doped carbon model catalysts that are designed for systematic comparison of the porous structures. The difference in their catalytic activity is investigated in relation to the surface area and the electrochemical parameters. We found that macro- and mesoporous structures contribute to different stages of the reaction kinetics. The catalytic activity is further enhanced by loading the optimized amount of Fe to prepare Fe-N-C catalyst. In both N-doped carbon and Fe-N-C catalysts, the hierarchical porous structure improved electrocatalytic performance in acidic and alkaline media. The optimized catalyst exhibits one of the best ORR performance in alkaline medium with excellent long-term stability in anion exchange membrane fuel cell and accelerated durability test. Our study establishes a basis for rationale design of the porous carbon structure for electrocatalytic applications.

Alternative Assembly of α-Synuclein Leading to Protein Film Formation and Its Application for Developing Polydiacetylene-Based Sensing Materials.

Understanding the self-assembly process of amyloidogenic protein is valuable not only to find its pathological implication but also to prepare protein-based biomaterials. α-Synuclein (αS), a pathological component of Parkinson's disease, producing one-dimensional (1D) amyloid fibrils, has been employed to generate two-dimensional (2D) protein films by encouraging an alternative self-assembly process. At a high temperature of 50 °C, αS molecules self-assembled into 2D films instead of 1D amyloid fibrils, whereas the fibrils were the major product at 37 °C. Based on circular dichroism and Fourier transform infrared spectroscopy analyses, the film was produced via a structural transition from the initial random to still undefined but mostly the turn or loop structure, which was distinctive from the ß-sheet formation observed with the amyloid fibrils. The αS 2D film was also routinely prepared at the oil-water interface and used as a matrix to produce polydiacetylene-based sensing materials. 10,12-Pentacosadiynoic acids (PCDA) were aligned on the film and photopolymerized to form a π-conjugated molecular assembly yielding a blue color. Its colorimetric transition to red was induced by increasing the temperature. This functionalized protein film increased its height from 40 to 55 nm upon PCDA immobilization and exhibited enhanced physical and chemical stability. In addition, the modified film showed remarkably high electrical conductivity only in the red state. This film, therefore, can be considered as a robust protein-based hybrid biomaterial capable of simultaneously recognizing various external stimuli (heat, pH, and solvents) with changes in color and conductivity, and it is expected to be utilized as a basic material for the development of biocompatible sensors.

Engineering Titanium Dioxide Nanostructures for Enhanced Lithium-Ion Storage.

Various kinds of nanostructured materials have been extensively investigated as lithium ion battery electrode materials derived from their numerous advantageous features including enhanced energy and power density and cyclability. However, little is known about the microscopic origin of how nanostructures can enhance lithium storage performance. Herein, we identify the microscopic origin of enhanced lithium storage in anatase TiO2 nanostructure and report a reversible and stable route to achieve enhanced lithium storage capacity in anatase TiO2. We designed hollow anatase TiO2 nanostructures composed of interconnected ∼5 nm sized nanocrystals, which can individually reach the theoretical lithium storage limit and maintain a stable capacity during prolonged cycling (i.e., 330 mAh g-1 for the initial cycle and 228 mAh g-1 for the 100th cycle, at 0.1 A g-1). In situ characterization by X-ray diffraction and X-ray absorption spectroscopy shows that enhanced lithium storage into the anatase TiO2 nanocrystal results from the insertion reaction, which expands the crystal lattice during the sequential phase transition (anatase TiO2 → Li0.55TiO2 → LiTiO2). In addition to the pseudocapacitive charge storage of nanostructures, our approach extends the utilization of nanostructured TiO2 for significantly stabilizing excess lithium storage in crystal structures for long-term cycling, which can be readily applied to other lithium storage materials.

Edge-Terminated MoS2 Nanoassembled Electrocatalyst via In Situ Hybridization with 3D Carbon Network.

Transition metal dichalcogenides, especially MoS2 , are considered as promising electrocatalysts for hydrogen evolution reaction (HER). Since the physicochemical properties of MoS2 and electrode morphology are highly sensitive factor for HER performance, designed synthesis is highly pursued. Here, an in situ method to prepare a 3D carbon/MoS2 hybrid catalyst, motivated by the graphene ribbon synthesis process, is reported. By rational design strategies, the hybrid electrocatalysts with cross-connected porous structure are obtained, and they show a high HER activity even comparable to the state-of-the-art MoS2 catalyst without appreciable activity loss in long-term operations. Based on various physicochemical techniques, it is demonstrated that the synthetic procedure can effectively guide the formation of active site and 3D structure with a distinctive feature; increased exposure of active sites by decreased domain size and intrinsically high activity through controlling the number of stacking layers. Moreover, the importance of structural properties of the MoS2 -based catalysts is verified by controlled experiments, validating the effectiveness of the designed synthesis approach.

Large-Scale Synthesis of Carbon-Shell-Coated FeP Nanoparticles for Robust Hydrogen Evolution Reaction Electrocatalyst.

A highly active and stable non-Pt electrocatalyst for hydrogen production has been pursued for a long time as an inexpensive alternative to Pt-based catalysts. Herein, we report a simple and effective approach to prepare high-performance iron phosphide (FeP) nanoparticle electrocatalysts using iron oxide nanoparticles as a precursor. A single-step heating procedure of polydopamine-coated iron oxide nanoparticles leads to both carbonization of polydopamine coating to the carbon shell and phosphidation of iron oxide to FeP, simultaneously. Carbon-shell-coated FeP nanoparticles show a low overpotential of 71 mV at 10 mA cm-2, which is comparable to that of a commercial Pt catalyst, and remarkable long-term durability under acidic conditions for up to 10 000 cycles with negligible activity loss. The effect of carbon shell protection was investigated both theoretically and experimentally. A density functional theory reveals that deterioration of catalytic activity of FeP is caused by surface oxidation. Extended X-ray absorption fine structure analysis combined with electrochemical test shows that carbon shell coating prevents FeP nanoparticles from oxidation, making them highly stable under hydrogen evolution reaction operation conditions. Furthermore, we demonstrate that our synthetic method is suitable for mass production, which is highly desirable for large-scale hydrogen production.

Enhancing p-Type Thermoelectric Performances of Polycrystalline SnSe via Tuning Phase Transition Temperature.

SnSe emerges as a new class of thermoelectric materials since the recent discovery of an ultrahigh thermoelectric figure of merit in its single crystals. Achieving such performance in the polycrystalline counterpart is still challenging and requires fundamental understandings of its electrical and thermal transport properties as well as structural chemistry. Here we demonstrate a new strategy of improving conversion efficiency of bulk polycrystalline SnSe thermoelectrics. We show that PbSe alloying decreases the transition temperature between Pnma and Cmcm phases and thereby can serve as a means of controlling its onset temperature. Along with 1% Na doping, delicate control of the alloying fraction markedly enhances electrical conductivity by earlier initiation of bipolar conduction while reducing lattice thermal conductivity by alloy and point defect scattering simultaneously. As a result, a remarkably high peak ZT of ∼1.2 at 773 K as well as average ZT of ∼0.5 from RT to 773 K is achieved for Na0.01(Sn1-xPbx)0.99Se. Surprisingly, spherical-aberration corrected scanning transmission electron microscopic studies reveal that NaySn1-xPbxSe (0 < x ≤ 0.2; y = 0, 0.01) alloys spontaneously form nanoscale particles with a typical size of ∼5-10 nm embedded inside the bulk matrix, rather than solid solutions as previously believed. This unexpected feature results in further reduction in their lattice thermal conductivity.

Multidimensional Anodized Titanium Foam Photoelectrode for Efficient Utilization of Photons in Mesoscopic Solar Cells.

Mesoscopic solar cells based on nanostructured oxide semiconductors are considered as a promising candidates to replace conventional photovoltaics employing costly materials. However, their overall performances are below the sufficient level required for practical usages. Herein, this study proposes an anodized Ti foam (ATF) with multidimensional and hierarchical architecture as a highly efficient photoelectrode for the generation of a large photocurrent. ATF photoelectrodes prepared by electrochemical anodization of freeze-cast Ti foams have three favorable characteristics: (i) large surface area for enhanced light harvesting, (ii) 1D semiconductor structure for facilitated charge collection, and (iii) 3D highly conductive metallic current collector that enables exclusion of transparent conducting oxide substrate. Based on these advantages, when ATF is utilized in dye-sensitized solar cells, short-circuit photocurrent density up to 22.0 mA cm-2 is achieved in the conventional N719 dye-I3- /I- redox electrolyte system even with an intrinsically inferior quasi-solid electrolyte.

Iron Oxide Photoelectrode with Multidimensional Architecture for Highly Efficient Photoelectrochemical Water Splitting.

Nanostructured metal oxide semiconductors have shown outstanding performances in photoelectrochemical (PEC) water splitting, but limitations in light harvesting and charge collection have necessitated further advances in photoelectrode design. Herein, we propose anodized Fe foams (AFFs) with multidimensional nano/micro-architectures as a highly efficient photoelectrode for PEC water splitting. Fe foams fabricated by freeze-casting and sintering were electrochemically anodized and directly used as photoanodes. We verified the superiority of our design concept by achieving an unprecedented photocurrent density in PEC water splitting over 5 mA cm-2 before the dark current onset, which originated from the large surface area and low electrical resistance of the AFFs. A photocurrent of over 6.8 mA cm-2 and an accordingly high incident photon-to-current efficiency of over 50 % at 400 nm were achieved with incorporation of Co oxygen evolution catalysts. In addition, research opportunities for further advances by structual and compositional modifications are discussed, which can resolve the low fill factoring behavior and improve the overall performance.

Conversion Reaction-Based Oxide Nanomaterials for Lithium Ion Battery Anodes.

Developing high-energy-density electrodes for lithium ion batteries (LIBs) is of primary importance to meet the challenges in electronics and automobile industries in the near future. Conversion reaction-based transition metal oxides are attractive candidates for LIB anodes because of their high theoretical capacities. This review summarizes recent advances on the development of nanostructured transition metal oxides for use in lithium ion battery anodes based on conversion reactions. The oxide materials covered in this review include oxides of iron, manganese, cobalt, copper, nickel, molybdenum, zinc, ruthenium, chromium, and tungsten, and mixed metal oxides. Various kinds of nanostructured materials including nanowires, nanosheets, hollow structures, porous structures, and oxide/carbon nanocomposites are discussed in terms of their LIB anode applications.

Hybrid Cellular Nanosheets for High-Performance Lithium-Ion Battery Anodes.

We report a simple synthetic method of carbon-based hybrid cellular nanosheets that exhibit outstanding electrochemical performance for many key aspects of lithium-ion battery electrodes. The nanosheets consist of close-packed cubic cavity cells partitioned by carbon walls, resembling plant leaf tissue. We loaded carbon cellular nanosheets with SnO2 nanoparticles by vapor deposition method and tested the performance of the resulting SnO2-carbon nanosheets as anode materials. The specific capacity is 914 mAh g(-1) on average with a retention of 97.0% during 300 cycles, and the reversible capacity is decreased by only 20% as the current density is increased from 200 to 3000 mA g(-1). In order to explain the excellent electrochemical performance, the hybrid cellular nanosheets were analyzed with cyclic voltammetry, in situ X-ray absorption spectroscopy, and transmission electron microscopy. We found that the high packing density, large interior surface area, and rigid carbon wall network are responsible for the high specific capacity, lithiation/delithiation reversibility, and cycling stability. Furthermore, the nanosheet structure leads to the high rate capability due to fast Li-ion diffusion in the thickness direction.