Ultrafast Electron Transfer Kinetics of Graphene Grown by Chemical Vapor Deposition.

High electrochemical reactivity is required for various energy and sensing applications of graphene grown by chemical vapor deposition (CVD). Herein, we report that heterogeneous electron transfer can be remarkably fast at CVD-grown graphene electrodes that are fabricated without using the conventional poly(methyl methacrylate) (PMMA) for graphene transfer from a growth substrate. We use nanogap voltammetry based on scanning electrochemical microscopy to obtain very high standard rate constants k(0) ≥25 cm s(-1) for ferrocenemethanol oxidation at polystyrene-supported graphene. The rate constants are at least 2-3 orders of magnitude higher than those at PMMA-transferred graphene, which demonstrates an anomalously weak dependence of electron-transfer rates on the potential. Slow kinetics at PMMA-transferred graphene is attributed to the presence of residual PMMA. This unprecedentedly high reactivity of PMMA-free CVD-grown graphene electrodes is fundamentally and practically important.

Effect of airborne contaminants on the wettability of supported graphene and graphite.

It is generally accepted that supported graphene is hydrophobic and that its water contact angle is similar to that of graphite. Here, we show that the water contact angles of freshly prepared supported graphene and graphite surfaces increase when they are exposed to ambient air. By using infrared spectroscopy and X-ray photoelectron spectroscopy we demonstrate that airborne hydrocarbons adsorb on graphitic surfaces, and that a concurrent decrease in the water contact angle occurs when these contaminants are partially removed by both thermal annealing and controlled ultraviolet-O3 treatment. Our findings indicate that graphitic surfaces are more hydrophilic than previously believed, and suggest that previously reported data on the wettability of graphitic surfaces may have been affected by unintentional hydrocarbon contamination from ambient air.

Electrochemical control of ion transport through a mesoporous carbon membrane.

We report a carbon-based, three-dimensional nanofluidic transport membrane that enables gated, or on/off, control of the transport of organic molecular species and metal ions using an applied electrical potential. In the absence of an applied potential, both cationic and anionic molecules freely diffuse across the membrane via a concentration gradient. However, when an electrochemical potential is applied, the transport of ions through the membrane is inhibited.

DNA nanostructure meets nanofabrication.

Recent advances in DNA nanotechnology have made it possible to construct DNA nanostructures of almost arbitrary shapes with 2-3 nm of precision in their dimensions. These DNA nanostructures are ideal templates for bottom-up nanofabrication. This review highlights the challenges and recent advances in three areas that are directly related to DNA-based nanofabrication: (1) fabrication of large scale DNA nanostructures; (2) pattern transfer from DNA nanostructure to an inorganic substrate; and (3) directed assembly of DNA nanostructures.

Nanoscale growth and patterning of inorganic oxides using DNA nanostructure templates.

We describe a method to form custom-shaped inorganic oxide nanostructures by using DNA nanostructure templates. We show that a DNA nanostructure can modulate the rate of chemical vapor deposition of SiO2 and TiO2 with nanometer-scale spatial resolution. The resulting oxide nanostructure inherits its shape from the DNA template. This method generates both positive-tone and negative-tone patterns on a wide range of substrates and is compatible with conventional silicon nanofabrication processes. Our result opens the door to the use of DNA nanostructures as general-purpose templates for high-resolution nanofabrication.

Flexible, all-organic chemiresistor for detecting chemically aggressive vapors.

Chemiresistors made of thin films of single-walled carbon nanotube (CNT) bundles on cellulosics (paper and cloth) can detect aggressive oxidizing vapors such as nitrogen dioxide and chlorine at 250 and 500 ppb, respectively, at room temperature in ambient air without the aid of a vapor concentrator. Inkjet-printed films of CNTs on 100% acid-free paper are significantly more robust than dip-coated films on plastic substrates. Performance attributes include low sensor-to-sensor variation, spontaneous signal recovery, negligible baseline drift, and the ability to bend the sensors to a crease without loss of sensor performance.

Photochemical oxidation of CVD-grown single layer graphene.

CVD-grown single layer graphene undergoes rapid photochemical oxidation in the presence of ultraviolet light and oxygen. The oxidation results in a homogeneous decay of the graphitic material; no nanoscale line cracks or pits were observed with an atomic force microscope. The conductivity of the graphene film decreases with an increasing degree of oxidation. It is crucial to understand and enhance the photochemical stability of graphene for its long term use as a transparent conducting material.

Molecular lithography through DNA-mediated etching and masking of SiO2.

We demonstrate a new approach to pattern transfer for bottom-up nanofabrication. We show that DNA promotes/inhibits the etching of SiO(2) at the single-molecule level, resulting in negative/positive tone pattern transfers from DNA to the SiO(2) substrate.

Oxidative template for conducting polymer nanoclips.

Bulk quantities of electronic conducting polymers such as polyaniline, polypyrrole, and poly(3,4-ethylenedioxythiophene), having an unusual 2D nanoclip-like morphology is described using a general oxidative template assembly route which is orchestrated by an insoluble complex formed between an anionic oxidant (S(2)O(8)(2-)) and a cationic surfactant.

Catalyst-free synthesis of oligoanilines and polyaniline nanofibers using H(2)O(2).

Nanofibers of polyaniline and oligoanilines of controlled molecular weight, e.g., tetraaniline, octaaniline, and hexadecaaniline, are synthesized using a versatile high ionic strength aqueous system that permits the use of H(2)O(2) with no added catalysts as a mild oxidizing agent. Films of oligoanilines deposited on plastic substrates show a robust and reversible chemiresistor response to NO(2) vapor at room temperature in ambient air (100-5 ppm).

Water desalination using nanoporous single-layer graphene.

By creating nanoscale pores in a layer of graphene, it could be used as an effective separation membrane due to its chemical and mechanical stability, its flexibility and, most importantly, its one-atom thickness. Theoretical studies have indicated that the performance of such membranes should be superior to state-of-the-art polymer-based filtration membranes, and experimental studies have recently begun to explore their potential. Here, we show that single-layer porous graphene can be used as a desalination membrane. Nanometre-sized pores are created in a graphene monolayer using an oxygen plasma etching process, which allows the size of the pores to be tuned. The resulting membranes exhibit a salt rejection rate of nearly 100% and rapid water transport. In particular, water fluxes of up to 10(6) g m(-2) s(-1) at 40 °C were measured using pressure difference as a driving force, while water fluxes measured using osmotic pressure as a driving force did not exceed 70 g m(-2) s(-1) atm(-1).

Interaction of magnesium ions with pristine single-layer and defected graphene/water interfaces studied by second harmonic generation.

This work reports thermodynamic and electrostatic parameters for fused silica/water interfaces containing cm(2)-sized graphene ranging from a single layer of pristine graphene to defected graphene. Second harmonic generation (SHG) measurements carried out at pH 7 indicate that the surface charge density of the fused silica/water interface containing the defected graphene (-0.009(3) to -0.010(3) C/m(2)) is between that of defect-free single layer graphene (-0.0049(8) C/m(2)) and bare fused silica (-0.013(6) C/m(2)). The interfacial free energy of the fused silica/water interface calculated from the Lippmann equation is reduced by a factor of 7 in the presence of single-layer pristine graphene, while defected graphene reduces it only by a factor of at most 2. Subsequent SHG adsorption isotherm studies probing the Mg(2+) adsorption at the fused silica/water interface result in fully reversible metal ion interactions and observed binding constants, Kads, of 4(1) - 5(1) × 10(3) M(-1) for pristine graphene and 3(1) - 4(1) × 10(3) M(-1) for defected graphene, corresponding to adsorption free energies, ΔGads, referenced to the 55.5 molarity of water, of -30(1) to -31.1(7) kJ/mol for both interfaces, comparable to Mg(2+) adsorption at the bare fused silica/water interface. Maximum Mg(2+) ion densities are obtained from Gouy-Chapman model fits to the Langmuir adsorption isotherms and found to range from 1.1(5) - 1.5(4) × 10(12) ions adsorbed per cm(2) for pristine graphene and 2(1) - 3.1(5) × 10(12) ions adsorbed per cm(2) for defected graphene, slightly smaller than those of for Mg(2+) adsorption at the bare fused silica/water interface ((2-4) × 10(12) ions adsorbed per cm(2)), assuming the magnesium ions are bound as divalent species. We conclude that the presence of defects in the graphene sheet, which we estimate here to be around 1.3 × 10(11) cm(2), imparts only subtle changes in the thermodynamic and electrostatic parameters quantified here.

Absolute molecular weight of polyaniline.

The absolute molecular weight of polyaniline in the pernigraniline, emeraldine, and leucoemeraldine oxidation states has been measured by light scattering and the exact number of aniline repeat units determined for the first time. Using potential-time profiling to monitor the chemical oxidative polymerization of aniline using ammonium peroxydisulfate oxidant, all three oxidation states of polyaniline can be synthesized in one step and the evolution of polymer molecular weight monitored. The pernigraniline intermediate formed during the chemical oxidative polymerization of aniline increases by 17-20% when it is converted to emeraldine, which is consistent with a two-step polymerization mechanism. These findings establish a solid experimental framework to chemically synthesize block copolymers of polyaniline by using different monomers to intercept the reaction at the pernigraniline oxidation state.