Tunable 2D Conjugated Porous Organic Polymer Films for Precise Molecular Nanofiltration and Optoelectronics.

Structural design of 2D conjugated porous organic polymer films (2D CPOPs), by tuning linkage chemistries and pore sizes, provides great adaptability for various applications, including membrane separation. Here, four free-standing 2D CPOP films of imine- or hydrazone-linked polymers (ILP/HLP) in combination with benzene (B-ILP/HLP) and triphenylbenzene (TPB-ILP/HLP) aromatic cores are synthesized. The anisotropic disordered films, composed of polymeric layered structures, can be exfoliated into ultrathin 2D-nanosheets with layer-dependent electrical properties. The bulk CPOP films exhibit structure-dependent optical properties, triboelectric nanogenerator output, and robust mechanical properties, rivaling previously reported 2D polymers and porous materials. The exfoliation energies of the 2D CPOPs and their mechanical behavior at the molecular level are investigated using density function theory (DFT) and molecular dynamics (MD) simulations, respectively. Exploiting the structural tunability, the comparative organic solvent nanofiltration (OSN) performance of six membranes having different pore sizes and linkages to yield valuable trends in molecular weight selectivity is investigated. Interestingly, the OSN performances follow the predicted transport modeling values based on theoretical pore size calculations, signifying the existence of permanent porosity in these materials. The membranes exhibit excellent stability in organic solvents at high pressures devoid of any structural deformations, revealing their potential in practical OSN applications.

The incidence and risk factors of stent fracture in patients treated for proximal common carotid artery stenosis.

OBJECTIVE: Our aim was to identify the incidence of and predictors for common carotid artery (CCA) stent fractures (SFs) and to examine the effect of SFs on the development of in-stent restenosis (ISR). METHODS: Seventy patients (37 women; median age, 60.9 years) who were stented for significant (≥60%) proximal CCA stenosis from 2006 to 2016 and revisited us to determine SF using fluoroscopy in 2018 were evaluated. Seventy stents were deployed; among them 87.1% were balloon-expandable and 12.9% were self-expandable. SFs were classified as type I (fracture of one strut), type II (fracture of multiple struts without stent deformity), type III (fracture of multiple struts with stent deformity), type IV (complete fracture of the stent without a gap), and type V (complete fracture of the stent with a gap). Duplex ultrasound examination was used for monitoring stent patency. Mann-Whitney U and Fisher's exact tests, Kaplan-Meier and logistic regression analyses, and a log-rank test and a gamma correlation analysis were applied as statistical methods. RESULTS: The patients were followed for 75.5 months (range, 47-109 months). Significant (≥70%) ISR was observed in eight patients (11.4%). Reintervention was performed in four cases (5.7%). Twenty-seven SFs (38.6%; type I, 8; type II, 10; type III, 4; type IV, 2; and type V, 3) were found. Calcification was shown to be a significant predictor for SF (odds ratio, 13.2; 95% confidence interval, 3.9-45.1; P < .001). There was no significant difference between the fractured and the nonfractured group regarding the number of patients with ISR and reintervention (P = .701 and P = .636, respectively). Neither did the primary patency rates differ significantly (P = .372) in patients with and without SF. CONCLUSIONS: Fractures frequently occur in a wide variety of stent devices deployed in the proximal CCA, but SFs seem to have no effect on ISR and reintervention.

Beyond PEG2000: synthesis and functionalisation of monodisperse PEGylated homostars and clickable bivalent polyethyleneglycols.

A new strategy to access highly monodisperse, heterobifunctional linear polyethylenglycols (PEGs) has been designed. This was built around unidirectional, iterative chain extension of a 3-arm PEG homostar. A mono-(4,4'-dimethoxytriphenylmethyl) octagol building block, DmtrO-EG8-OH, was constructed from tetragol. After six rounds of chain extension, the monodisperse homostar reached the unprecedented length of 56 monomers per arm (PEG2500). The unique architecture of the synthetic platform greatly assisted in facilitating and monitoring reaction completion, overcoming kinetic limitations, chromatographic purification of intermediates, and analytical assays. After chain terminal derivatisation, mild hydrogenolytic cleavage of the homostar hub provided heterobifunctional linear EG56 chains with a hydroxyl at one end, and either a toluene sulfonate, or a tert-butyl carboxylate ester at the other. A range of heterobifunctional, monodisperse PEGs was then prepared having useful cross-linking functionalities (-OH, -COOH, -NH2, -N3) at both ends. A rapid preparation of polydisperse PEG homostars, free of multiply cross-linked chains, is also described. The above approach should be extendable to other high value oligomers and polymers.

Biobased Interpenetrating Polymer Network Membranes for Sustainable Molecular Sieving.

There is an urgent need for sustainable alternatives to fossil-based polymer materials. Through nanodomain engineering, we developed, without using toxic cross-linking agents, interpenetrating biopolymer network membranes from natural compounds that have opposing polarity in water. Agarose and natural rubber latex were consecutively self-assembled and self-cross-linked to form patchlike nanodomains. Both nano-Fourier transform infrared (nano-FTIR) spectroscopy and computational methods revealed the biopolymers' molecular-level entanglement. The membranes exhibited excellent solvent resistance and offered tunable molecular sieving. We demonstrated control over separation performance in the range of 227-623 g mol-1 via two methodologies: adjusting the molecular composition of the membranes and activating them in water. A carcinogenic impurity at a concentration of 5 ppm, which corresponds to the threshold of toxicological concern, was successfully purged at a negligible 0.56% pharmaceutical loss. The biodegradable nature of the membranes enables an environmentally friendly end-of-life phase; therefore, the membranes have a sustainable lifecycle from cradle to grave.

Design of Mixed-Matrix MOF Membranes with Asymmetric Filler Density and Intrinsic MOF/Polymer Compatibility for Enhanced Molecular Sieving.

The separation of high-value-added chemicals from organic solvents is important for many industries. Membrane-based nanofiltration offers a more energy-efficient separation than the conventional thermal processes. Conceivably, mixed-matrix membranes (MMMs), encompassing metal-organic frameworks (MOFs) as fillers, are poised to promote selective separation via molecular sieving, synergistically combining polymers flexibility and fine-tuned porosity of MOFs. Nevertheless, conventional direct mixing of MOFs with polymer solutions results in underutilization of the MOF fillers owing to their uniform cross-sectional distribution. Therefore, in this work, a multizoning technique is proposed to produce MMMs with an asymmetric-filler density, in which the MOF fillers are distributed only on the surface of the membrane, and a seamless interface at the nanoscale. The design strategy demonstrates five times higher MOF surface coverage, which results in a solvent permeance five times higher than that of conventional MMMs while maintaining high selectivity. Practically, MOFs are paired with polymers of similar chemical nature to enhance their adhesion without the need for surface modification. The approach offers permanently accessible MOF porosity, which translates to effective molecular sieving, as exemplified by the polybenzimidazole and Zr-BI-fcu-MOF system. The findings pave the way for the development of composite materials with a seamless interface.

Conductive nanofiltration membranes via in situ PEDOT-polymerization for electro-assisted membrane fouling mitigation.

Nanofiltration (NF) membranes play a pivotal role in water treatment; however, the persistent challenge of membrane fouling hampers their stable application. This study introduces a novel approach to address this issue through the creation of a poly(3,4-ethylenedioxythiophene) (PEDOT)-based conductive membrane, achieved by synergistically coupling interfacial polymerization (IP) with in situ self-polymerization of EDOT. During the IP reaction, the concurrent generation of HCl triggers the protonation of EDOT, activating its self-polymerization into PEDOT. This interwoven structure integrates with the polyamide network to establish a stable selective layer, yielding a remarkable 90 % increase in permeability to 20.4 L m-2 h-1 bar-1. Leveraging the conductivity conferred by PEDOT doping, an electro-assisted cleaning strategy is devised, rapidly restoring the flux to 98.3 % within 5 min, outperforming the 30-minute pure water cleaning approach. Through simulations in an 8040 spiral-wound module and the utilization of the permeated salt solution for cleaning, the electro-assisted cleaning strategy emerges as an eco-friendly solution, significantly reducing water consumption and incurring only a marginal electricity cost of 0.055 $ per day. This work presents an innovative avenue for constructing conductive membranes and introduces an efficient and cost-effective electro-assisted cleaning strategy to effectively combat membrane fouling.

Multistep Transformation from Amorphous and Nonporous Fullerenols to Highly Crystalline Microporous Materials.

The structural and morphological properties of fullerenols upon exposure to heat treatment have yet to be understood. Herein, the temperature-driven structural and morphological evolutions of fullerenols C60 (OH) and C70 (OH) were investigated. In situ spectroscopic techniques, such as variable-temperature X-ray diffraction and coupled thermogravimetric Fourier-transform infrared analysis, were used to elucidate the structural transformation mechanism of fullerenols. Both fullerenols underwent four-step structural transformation upon heating and cooling, including amorphous-to-crystalline transition, thermal expansion, structural compression, and new crystal formation. Compared to the initially nonporous amorphous fullerenol, the crystalline product exhibited microporosity with a surface area of 114 m2 g-1 and demonstrated CO2 sorption capability. These findings show the potential of fullerene derivatives as adsorbents.

Nanofibrous membranes comprising intrinsically microporous polyimides with embedded metal-organic frameworks for capturing volatile organic compounds.

Here, we report the fabrication of nanofibrous air-filtration membranes of intrinsically microporous polyimide with metal-organic frameworks (MOFs). The membranes successfully captured VOCs from air. Two polyimides with surface areas up to 500 m2 g-1 were synthesized, and the impact of the porosity on the sorption kinetics and capacity of the nanofibers were investigated. Two Zr-based MOFs, namely pristine UiO-66 (1071 m2 g-1) and defective UiO-66 (1582 m2 g-1), were embedded into the nanofibers to produce nanocomposite materials. The nanofibers could remove polar formaldehyde and non-polar toluene, xylene, and mesitylene from air. The highest sorption capacity with 214 mg g-1 was observed for xylene, followed by mesitylene (201 mg g-1), toluene (142 mg g-1), and formaldehyde (124 mg g-1). The incorporation of MOFs drastically improved the sorption performance of the fibers produced from low-surface-area polyimide. Time-dependent sorption tests revealed the rapid sequestration of air pollutants owing to the intrinsic porosity of the polyimides and the MOF fillers. The porosity allowed the rapid diffusion of pollutants into the inner fiber matrix. The molecular level interactions between VOCs and polymer/MOFs were clarified by molecular modeling studies. The practicality of material fabrication and the applicability of the material were assessed through the modification of industrial N95 dust masks. To the best of our knowledge, this is the first successful demonstration of the synergistic combination of intrinsically microporous polyimides and MOFs in the form of electrospun nanofibrous membranes and their application for VOC removal.

Norbornane-based covalent organic frameworks for gas separation.

Covalent organic frameworks (COFs) have emerged as a new class of crystalline porous materials with distinct structural features, such as uniform pore distribution, tunable architecture, and modifiable skeletons. COFs hold significant promise for application in gas separation because of their high Brunauer-Emmett-Teller surface area and narrow pore-size distribution, which enable selective separation. The porosity and separation performance of COFs have been finely tuned by structurally modifying the starting materials. Along this direction, for the first time, we prepared W-shaped diamines by catalytic arene-norbornene annulation (CANAL) and then treated them with trialdehyde (Tp) to synthesize novel ß-ketoenamine-linked norbornane-based COFs, i.e., ND-COF-1 and ND-COF-2, via a solvothermal Schiff-base condensation approach. The pore interior was decorated with methyl groups attached to the norbornane unit of the COF skeleton. Both COFs exhibited high chemical stability in different organic solvents and acidic media. Additionally, they showed high CO2/N2 selectivity compared with those of previously reported COFs. Moreover, their CH4/N2 separation efficiency was investigated, and the results revealed that ND-COF-1 is more selective than ND-COF-2, which could be attributed to the less hindered pathway offered to methane gas molecules by the framework pore.

Fast-dissolving antibacterial nanofibers of cyclodextrin/antibiotic inclusion complexes for oral drug delivery.

HYPOTHESIS: The widespread use of antibacterial electrospun nanofibers is mostly restricted due to their low loading capacity to carry antibiotics and the need to use toxic organic solvents to boost the antibiotic loading capacity. Nanofibers based on natural excipients, such as cyclodextrin (CD)-based nanofibers, can carry larger amounts of antibiotics while achieving better stability via inclusion complexation. EXPERIMENTS: Nanofibers were produced by electrospinning and analyzed by electron microscopy to investigate the morphology of fibers. The formation of inclusion-complexation was analyzed by 1H NMR, FTIR, and XRD. Thermal analysis of the fibers was done using TGA. Ab initio modeling studies were done to calculate the complexation energies of antibiotics with CD. A disk-diffusion assay was used to test the antibacterial activity of the fibers. FINDINGS: Bead-free antibacterial nanofibers with mean diameters between 340 and 550 nm were produced. The formation of inclusion complexes (IC) between the CD and the antibiotics was confirmed by FTIR and 1H NMR, which was further verified by the disappearance of the crystalline peaks of antibiotics as determined by XRD analysis. Thermal analysis of the nanofibers revealed that the formulations showed good antibiotic encapsulation (45-90%). Ab initio simulations revealed that gentamicin had the highest complexation energy, followed by kanamycin, chloramphenicol, and ampicillin. The antibacterial nanofibers rapidly dissolved in water and artificial saliva, successfully releasing the CD antibiotic complexes. The nanofibers showed high antibacterial activity against Gram-negative Escherichia coli.

Asymmetric Membrane Capacitive Deionization Using Anion-Exchange Membranes Based on Quaternized Polymer Blends.

Membrane capacitive deionization (MCDI) for water desalination is an innovative technique that could help to solve the global water scarcity problem. However, the development of the MCDI field is hindered by the limited choice of ion-exchange membranes. Desalination by MCDI removes the salt (solute) from the water (solvent); this can drastically reduce energy consumption compared to traditional desalination practices such as distillation. Herein, we outline the fabrication and characterization of quaternized anion-exchange membranes (AEMs) based on polymer blends of polyethylenimine (PEI) and polybenzimidazole (PBI) that provides an efficient membrane for MCDI. Flat sheet polymer membranes were prepared by solution casting, heat treatment, and phase inversion, followed by modification to impart anion-exchange character. Scanning electron microscopy (SEM), atomic force microscopy (AFM), nuclear magnetic resonance (NMR), and Fourier-transform infrared (FTIR) spectroscopy were used to characterize the morphology and chemical composition of the membranes. The as-prepared membranes displayed high ion-exchange capacity (IEC), hydrophilicity, permselectivity and low area resistance. Due to the addition of PEI, the high density of quaternary ammonium groups increased the IEC and permselectivity of the membranes, while reducing the area resistance relative to pristine PBI AEMs. Our PEI/PBI membranes were successfully employed in asymmetric MCDI for brackish water desalination and exhibited an increase in both salt adsorption capacity (>3×) and charge efficiency (>2×) relative to membrane-free CDI. The use of quaternized polymer blend membranes could help to achieve greater realization of industrial scale MCDI.

Middle and Distal Common Carotid Artery Stenting: Long-Term Patency Rates and Risk Factors for In-Stent Restenosis.

PURPOSE: In the absence of literature data, we aimed to determine the long-term patency rates of middle/distal common carotid artery (CCA) stenting and to investigate predisposing factors in the development of in-stent restenosis (ISR). MATERIALS AND METHODS: Fifty-one patients (30 males, median age 63.5 years), who underwent stenting with 51 self-expandable stents for significant (≥ 60%) stenosis of the middle/distal CCA, were analyzed retrospectively. Patient (atherosclerotic risk factors, comorbidities, medications), vessel (elongation), lesion (stenosis grade, length, calcification, location), and stent characteristics (material, diameter, length, fracture) were examined. Duplex ultrasonography was used to monitor stent patency. The Mann-Whitney U and Fisher's exact tests, Kaplan-Meier analyses, and a log-rank test were used statistically. RESULTS: The median follow-up time was 35 months (interquartile range, 20-102 months). Significant (≥ 70%) ISR developed in 14 patients (27.5%; stenosis, N = 10; entire CCA occlusion, N = 4). Primary patency rates were 98%, 92%, 83%, 73%, and 61% at 6, 12, 24, 60, and 96 months, respectively. Reintervention was performed in six patients (11.8%) with nonocclusive ISR. Secondary patency rates were 100% at 6 and 12 months and 96% at 24, 60, and 96 months. In-stent restenosis developed more frequently (P < .001) in patients with hyperlipidemia; primary patency rates were also significantly worse (Chi-square, 11.08; degrees of freedom, 1; P < .001) in patients with hyperlipidemia compared to those without. CONCLUSION: Stenting of the middle/distal CCA can be performed with acceptable patency rates. If intervention is unequivocally needed, patients with hyperlipidemia will require closer follow-up care. LEVEL OF EVIDENCE: Level 3, Local non-random sample.

Selective Electrocatalytic Oxidation of Biomass-Derived 5-Hydroxymethylfurfural to 2,5-Diformylfuran: from Mechanistic Investigations to Catalyst Recovery.

The catalytic transformation of bio-derived compounds, specifically 5-hydroxymethylfurfural (HMF), into value-added chemicals may provide sustainable alternatives to crude oil and natural gas-based products. HMF can be obtained from fructose and successfully converted to 2,5-diformylfuran (DFF) by an environmentally friendly organic electrosynthesis performed in an ElectraSyn reactor, using cost-effective and sustainable graphite (anode) and stainless-steel (cathode) electrodes in an undivided cell, eliminating the need for conventional precious metal electrodes. In this work, the electrocatalysis of HMF is performed by using green solvents such as acetonitrile, γ-valerolactone, as well as PolarClean, which is used in electrocatalysis for the first time. The reaction parameters and the synergistic effects of the TEMPO catalyst and 2,6-lutidine base are explored both experimentally and through computation modeling. The molecular design and synthesis of a size-enlarged C3 -symmetric tris-TEMPO catalyst are also performed to facilitate a sustainable reaction work-up through nanofiltration. The obtained performance is then compared with those obtained by heterogeneous TEMPO alternatives recovered by using an external magnetic field and microfiltration. Results show that this new method of electrocatalytic oxidation of HMF to DFF can be achieved with excellent selectivity, good yield, and excellent catalyst recovery.

Selective Electrocatalytic Oxidation of Biomass-Derived 5-Hydroxymethylfurfural to 2,5-Diformylfuran: from Mechanistic Investigations to Catalyst Recovery.

Invited for this month's cover is the group of Gyorgy Szekely at King Abdullah University of Science and Technology (KAUST). The image shows the efficient TEMPO-based electrocatalytic transformation of biomass-based C6 -platform chemical HMF to DFF using non-precious-metal-based electrodes in green solvents with nanofiltration-enabled catalyst recovery. The Full Paper itself is available at 10.1002/cssc.202000453.

Tailoring the Performance of Organic Solvent Nanofiltration Membranes with Biophenol Coatings.

This study reports a systematic investigation of fine-tuning the filtration performance of nanofiltration membranes with biophenol coatings to produce solvent-resistant membranes with 390-1550 g mol-1 molecular weight cutoff (MWCO) and 0.5-40 L m-2 h-1 bar-1 permeance. Six kinds of inexpensive, commercial biophenols (dopamine, tannic acid, vanillyl alcohol, eugenol, morin, and quercetin) were subjected to identical oxidant-promoted polymerization to coat six kinds of loose asymmetric membrane supports: polyimide (PI), polyacrylonitrile (PAN), polysulfone (PSf), polyvinylidene difluoride (PVDF), polybenzimidazole (PBI), and polydimethylsiloxane (PDMS). The coatings were characterized by Fourier-transform infrared spectroscopy (FTIR), and the morphologies were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The long-term stability of 42 membranes were tested in 12 organic solvents, including emerging green solvents MeTHF and Cyrene. The biophenol coatings led to tighter membranes with a decrease in MWCO of 12-79% at a penalty of a 22-92% permeance decrease in acetone.

Bio-Inspired Robust Membranes Nanoengineered from Interpenetrating Polymer Networks of Polybenzimidazole/Polydopamine.

Marine mussel inspired polydopamine (PDA) has received increased attention due to its good thermal and chemical stability as well as strong adhesion on most materials. In this work, high-performance nanofiltration membranes based on interpenetrating polymer networks (IPN) incorporating PDA and polybenzimidazole (PBI) were developed for organic solvent nanofiltration (OSN). Generally, in order to obtain solvent stability, polymers need to be covalently cross-linked under harsh conditions, which inevitably leads to losses in permeability and mechanical flexibility. Surprisingly, by in situ polymerization of dopamine within a PBI support, excellent solvent resistance and permeance of polar aprotic solvents were obtained without covalent cross-linking of the PBI backbone due to the formation of an IPN. The molecular weight cutoff and permeance of the membranes can be fine-tuned by changing the polymerization time. Robust membrane performance was achieved in conventional and emerging green polar aprotic solvents (PAS) in a wide temperature range covering -10 °C to +100 °C. It was successfully demonstrated that the in situ polymerization of PDA-creating an IPN-can provide a simple and green alternative to covalent cross-linking of membranes. To elucidate the nature of the solvent stability, a detailed analysis was performed that revealed that physical entanglement along with strong secondary interaction synergistically enable solvent resistance with as low as 1-3% PDA content.

Organization of last-order premotor interneurons related to the protraction of tongue in the frog, Rana esculenta.

Moving visual stimuli elicit a sequence of coordinated activity of muscles including tongue protraction. Morphological and physiological studies fail to reveal any direct tectal projections to hypoglossal motoneurons suggesting that the last-order premotor interneurons (LOPI) are the direct recipients of neural activities generated in the optic tectum. The aim of this study is to analyze the topographical organization of the last-order premotor interneurons related to protractor muscles of the tongue. In Rana esculenta, biotinylated dextran amine (BDA) was injected by iontophoresis into the subnucleus of the hypoglossal nerve containing the motoneurons of protractor muscles of the tongue. For visualizing BDA, sections were treated with avidin-biotin complex and a nickel-enhanced DAB chromogen reaction. The position of labeled neurons was reconstructed with a Neurolucida equipment. Morphologically heterogeneous populations of neurons were detected bilaterally, the majority of them were distributed ipsilateral to the site of injection and extended 1200 microm in rostral and 500 microm in caudal directions. Labeled neurons were found in the rhombencephalic reticular formation, the vestibular nuclei, the nucleus prepositus hypoglossi, the nucleus of solitary tract, the spinal nucleus of trigeminal nerve and the dorsal column nuclei. Our results indicate that the majority of last-order premotor interneurons related to protractor muscles of the tongue are located in the reticular formation of the brainstem. Since this area also receives a significant input from the vestibular system and from proprioceptive fibers, the last-order premotor interneurons presented here may be the target of convergence of sensory modalities involved in prey-catching behavior.

Hyaluronan accumulates around differentiating neurons in spinal cord of chicken embryos.

One major component of the extracellular matrix is hyaluronan (HA) which is thought to play a crucial role in the development of different organs including the central nervous system (CNS). HA is bound by specific receptors, CD44 and RHAMM, depending on cell types of CNS. However, data are lacking on the relation of HA to different cell populations in developing CNS. To provide new data about the co-localization of HA with the various cellular structures of the developing spinal cord, we studied the distribution pattern of hyaluronan in chicken embryos at Hamburger-Hamilton (HH) stages 8-39. A biotinylated HA-binding complex was used in combination with immunohistochemistry for proliferating and differentiating neurons. The intensity of the HA signal was determined by digital densitometry from histological sections. We found three mediolaterally oriented layers in the HA distribution pattern in stage HH23: (1) a moderate HA signal was detected in the ventricular zone; (2) strong HA accumulation was measured around Lim1,2-expressing cells (differentiating neurons) and early MNR2-expressing neurons (early motoneurons), corresponding to the intermediate zone; (3) a strong pericellular HA reaction was found around the neurons of the marginal zone. Interestingly, the peripheral nerves did not show HA signals. These findings suggest a crucial role of HA during neuronal development. We propose that HA may be involved in cell migration and axonal growth in the developing spinal cord.