Bioactive potential of Bio-C Temp demonstrated by systemic mineralization markers and immunoexpression of bone proteins in the rat connective tissue.

Intracanal medications are used in endodontic treatment due to their antibacterial activity and ability to induce the periapical repair. Among the intracanal medications, the Calen (CAL; SS. White, Brazil) is a calcium hydroxide-based medication that provides an alkaline pH and releases calcium, exerting an antimicrobial activity. Bio-C Temp (BIO; Angelus, Brazil), a ready-to-use bioceramic intracanal medication, was designed to stimulate the mineralized tissues formation. Here, we investigated the bioactive potential of BIO in comparison to the CAL in the rat subcutaneous. Polyethylene tubes filled with medications, and empty tubes (control group, CG) were implanted in the subcutaneous tissue of rats. After 7, 15, 30 and 60 days, the blood was collected for calcium (Ca+2) and alkaline phosphatase (ALP) measurement, and the capsules around the implants were processed for morphological analyses. The data were submitted to two-way ANOVA and Tukey test (p < 0.05). At 7, 15 and 30 days, the ALP level was grater in BIO and CAL than in CG (p < 0.0001). At 7 and 15 days, greater Ca+2 level was seen in the serum of CAL samples. From 7 to 60 days, an increase in the number of fibroblasts, osteocalcin- and osteopontin-immunolabelled cells was observed in BIO and CAL groups (p < 0.0001). In all periods, BIO and CAL specimens showed von Kossa-positive structures. Moreover, ultrastructural analysis revealed globules of mineralization in the capsules around the BIO and CAL specimens. Thus Bio-C Temp caused an increase in the ALP, osteocalcin and osteopontin, which may have allowed the formation of calcite, suggesting bioactive potential.

Biocompatibility and bioactive potential of NeoPUTTY calcium silicate-based cement: An in vivo study in rats.

AIM: To evaluate the inflammatory reaction and the ability to induce mineralization activity of a new repair material, NeoPUTTY (NPutty; NuSmile, USA), in comparison with Bio-C Repair (BC; Angelus, Brazil) and MTA Repair HP (MTA HP; Angelus, Brazil). METHODOLOGY: Polyethylene tubes were filled with materials or kept empty (control group, CG) and implanted in subcutaneous tissue of rats for 7, 15, 30, and 60 days (n = 6/group). Capsule thickness, number of inflammatory cells (ICs), fibroblasts, collagen content, and von Kossa analysis were performed. Unstained sections were evaluated under polarized light and by immunohistochemistry for osteocalcin (OCN). Data were submitted to two-way anova followed by Tukey's test (p ≤ .05), except for OCN. OCN data were submitted to Kruskal-Wallis and Dunn and Friedman post hoc tests followed by the Nemenyi test at a significance level of 5%. RESULTS: At 7, 15, and 30 days, thick capsules containing numerous ICs were seen around the materials. At 60 days, a moderate inflammatory reaction was observed for NPutty, BC while MTA HP presented thin capsules with moderate inflammatory cells. In all periods, NPutty specimens contained the highest values of ICs (p < .05). From 7 to 60 days, the number of ICs reduced significantly while an increase in the number of fibroblasts and birefringent collagen content was observed. At 7 and 15 days, no significant difference was observed in the immunoexpression of OCN (p > .05). At 30 and 60 days, NPutty showed the lowest values of OCN (p < .05). At 60 days, a similar immunoexpression was observed for BC and MTA HP (p > .05). In all time intervals, capsules around NPutty, BC, and MTA HP showed von Kossa-positive and birefringent structures. CONCLUSIONS: Despite the greater inflammatory reaction promoted by NeoPutty than BC and MTA HP, the reduction in the thickness of capsules, the increase in the number of fibroblasts, and the reduction in the number of ICs indicate that this bioceramic material is biocompatible Furthermore, NeoPutty presents the ability to induce mineralization activity.

Participation of fibroblast growth factor-1 and interleukin-10 in connective tissue repair following subcutaneous implantation of bioceramic materials in rats.

AIM: To evaluate whether the bioceramic materials Bio-C Pulpo (Bio-C, Angelus) and mineral trioxide aggregate (MTA) Repair HP (MTA-HP, Angelus) induce fibroblast proliferation and release of interleukin-10 (IL-10), an anti-inflammatory cytokine, stimulating connective tissue remodelling. The tissue response of Bio-C and MTA-HP was compared with the White MTA (WMTA; Angelus) since studies have demonstrated that WMTA induces tissue repair. METHODOLOGY: Bio-C, MTA-HP and WMTA were inserted into polyethylene tubes and implanted in the subcutaneous tissue of Holtzman rats for 7, 15, 30 and 60 days. As a control group (CG), empty tubes were implanted subcutaneously. The number of fibroblasts (FB), Ki-67-, fibroblast growth factor-1- (FGF-1) and IL-10-immunolabelled cells and collagen content in the capsules was obtained. The data were subjected to two-way anova followed by Tukey's test (p ≤ .05). RESULTS: At 7 days, significant differences in the number of FB were not detected amongst Bio-C, MTA-HP and WMTA groups (p Ëƒ .05). The capsules of all groups exhibited a significant increase in the number of FB and content of collagen over time. From 7 to 60 days, a significant reduction in the number of FGF-1- and Ki-67-immunolabelled cells was seen in the capsules of all specimens. In all periods, no significant difference in the number of FGF-1-immunolabelled cells was detected between Bio-C and CG specimens. At 60 days, significant differences in the immunoexpression of FGF-1 were not observed amongst the groups. At 7 and 15 days, the highest immunoexpression for Ki-67 was present in Bio-C specimens whilst, after 30 and 60 days, no significant difference was observed amongst the bioceramic materials. At 7 days, few IL-10 immunolabelled cells were present in the capsules of all specimens whereas, at 60 days, a significant increase in the IL-10-immunostaining was present in all groups. At 60 days, the Bio-C, MTA-HP and WMTA groups showed a greater number of IL-10-immunolabelled cells than in the CG specimens (p < .0001). CONCLUSIONS: Bio-C, MTA-HP and WMTA stimulate fibroblast proliferation, leading to the formation of collagen-rich capsules. FGF-1 and IL-10 may mediate the remodelling of capsules around Bio-C, MTA-HP and WMTA bioceramic materials.

Biocompatibility and bioactive potential of an experimental tricalcium silicate-based cement in comparison with Bio-C repair and MTA Repair HP materials.

AIM: To evaluate the tissue reaction of a tricalcium silicate-based repair material associated with 30% calcium tungstate (TCS + CaWO4 ) in comparison to Bio-C Repair (Bio-C; Angelus) and to MTA Repair HP (MTA HP; Angelus). METHODOLOGY: Polyethylene tubes filled with one of the materials or left empty (control group, CG) were implanted into the subcutaneous tissues of rats for 7, 15, 30 and 60 days (n = 32/group). The capsule thickness, number of inflammatory cells, collagen content, interleukin-6 (IL-6), osteocalcin (OCN), von Kossa reaction and analysis under polarized light were evaluated. The data were subjected to generalized linear models for repeated measures, except the OCN. OCN data were submitted to Kruskal-Wallis and Dunn's post hoc test and Friedman followed by Nemenyi's test at significance level of 5%. RESULTS: At all time points, significant differences in the number of inflammatory cells were not observed between TCS + CaWO4 and Bio-C, whereas, at 15, 30 and 60 days, no significant difference was detected between TCS + CaWO4 and MTA HP. At all periods, significant differences were not detected in the number of fibroblasts in TCS + CaWO4 versus MTA HP, and, at 60 days, no significant difference was demonstrated between these groups and CG. Significant differences in the immunoexpression of IL-6 were not detected amongst bioceramic materials at all periods. From 7 to 60 days, significant reduction in the number of inflammatory cells, number of IL-6-immunopositive cells and in the capsule thickness was accompanied by significant increase in the collagen in all groups. OCN-immunolabelled cells, von Kossa-positive structures and amorphous calcite deposits were observed around all materials, whereas, in the CG, these structures were not seen. CONCLUSIONS: These findings indicate that the experimental material (TCS + CaWO4 ) is biocompatible and has a bioactive potential, similar to the MTA HP and Bio-C Repair, and suggest its use as a root repair material.

Biocompatibility, bioactive potential, porosity, and interface analysis calcium silicate repair cements in a dentin tube model.

OBJECTIVES: This study is to evaluate biocompatibility, bioactive potential, porosity, and dentin/material interface of Bio-C Repair (BIOC-R), MTA Repair HP (MTAHP), and Intermediate Restorative Material (IRM). MATERIALS AND METHODS: Dentin tubes were implanted into subcutaneous of rats for 7, 15, 30, and 60 days. Thickness of capsules, number of inflammatory cells (ICs), interleukin-6 (IL-6), osteocalcin (OCN), and von Kossa were evaluated. Porosity and material/dentin interface voids were also analyzed. Data were submitted to ANOVA and Tukey's tests (p < 0.05). RESULTS: IRM capsules were thicker and contained greater ICs and IL-6-immunopositive cells at 7 and 15 days. BIOC-R capsules exhibited higher thickness and ICs at 7 days and greater IL-6 at 7 and 15 days than MTAHP (p < 0.05). At 30 and 60 days, no significant difference was observed among the groups. OCN-immunopositive cells, von Kossa-positive, and birefringent structures were observed in BIOC-R and MTAHP. MTAHP exhibited higher porosity and interface voids (p < 0.05). CONCLUSIONS: BIOC-R, MTAHP, and IRM are biocompatible. Bioceramics materials demonstrate bioactive potential. MTAHP presented the highest porosity and presence of voids. CLINICAL RELEVANCE: BIOC-R and MTAHP have adequate biological properties. BIOC-R demonstrated lower porosity and presence of voids, which may represent better sealing for its clinical applications.

Final irrigation protocols affect radicular dentin DMP1-CT expression, microhardness, and biochemical composition.

OBJECTIVE: To evaluate the effect of several final irrigation protocols on radicular dentin microhardness, biochemical composition, and DMP1-CT expression. MATERIALS AND METHODS: A total of 140 single-rooted human teeth were prepared with WaveOne Gold files and randomly distributed into 7 groups (n = 20) according to the final irrigation protocol: distilled water (DW); sodium hypochlorite-EDTA (NaOCl-EDTA); EDTA (EDTA); EDTA-NaOCl (EDTA-NaOCl); EDTA-chlorhexidine (EDTA-CHX); passive ultrasonic irrigation (PUI:NaOCl-EDTA); and PUI:NaOCl-EDTA-NaOCl. Dentin microhardness (n = 10) was evaluated in the root canal lumen using Vickers hardness tester. Immunohistochemical analysis (n = 5) was used to evaluate DMP1-CT expression. Dentin ultrastructure and biochemical composition were evaluated by using Raman and energy dispersive X-ray analysis (EDAX) (n = 5) with a scanning electron microscope (SEM). Analysis of variance (ANOVA) and Tukey test were performed (p˂0.05). RESULTS: Raman spectra of the organic content and DMP1-CT expression were lower at the lumen canal in EDTA-NaOCl, PUI:NaOCl-EDTA, and PUI:NaOCl-EDTA-NaOCl when compared to control (p < 0.05). EDAX showed reduced values for calcium and phosphorus in EDTA-NaOCl, PUI:NaOCl-EDTA, and PUI:NaOCl-EDTA-NaOCl. SEM microphotography's showed completely cleaned dentin, permeable tubules, and dentin erosion, mainly when PUI was used. NaOCl-EDTA presented significantly higher microhardness values than PUI:NaOCl-EDTA-NaOCl (p < 0.05). PUI:NaOCl-EDTA-NaOCl exhibited the lowest Vickers hardness values of all groups. CONCLUSION: The final irrigation protocols that used a final rinse with NaOCl and PUI showed a detrimental effect on radicular dentin DMP1-CT expression, biochemical composition, and microhardness. CLINICAL RELEVANCE: The adequate irrigation protocol could be advantageous to preserve the radicular dentin ultrastructure, promote adequate adhesion, and sustain favorable conditions for biomineralization and regeneration.

Fracture strength of teeth with coronal destruction after core build-up restoration with bulk fill materials.

OBJECTIVE: This study aimed to evaluate the fracture strength and failure modes of different core techniques in teeth with simulated coronal destruction. MATERIALS AND METHODS: Forty teeth were endodontically prepared and the specimens were divided into four experimental groups (n = 10) according to the core composition: Filtek One Bulk Fill-FOBF, Filtek Z350 XT-FZ350 (standard group), Filtek Bulk Fill Flow-FBFF, and LuxaCore Z-LCZ. CAD/CAM Monolithic zirconia crowns were obtained and cemented with RelyX U200. After storage in distilled water at 37°C for 48 h, the specimens were subjected to thermal cycling and to compressive strength mechanical tests. Statistical analyses (α = 0.05) were performed by non-parametric Kruskal-Wallis, Dunn post hoc, and Fisher's exact tests. RESULTS: No significant differences (p > 0.05) were observed among FOBF, FZ350, and FBFF (mean ranks = 20.30, 12.20, and 23.20, respectively). LCZ (mean rank = 26.30) produced results similar to those of FOBF and FBFF (p > 0.05) and higher than those of FZ350 (p = 0.042). The most frequent type of failure was irreparable, regardless of the experimental condition. The lowest percentages of reparable fractures were produced by FOBF group (10%). CONCLUSIONS: The use of bulk fill materials, including the "core-and-post" LCZ dual-cure resin composite, did not impair the fracture strength of endodontically treated teeth with coronal destruction. CLINICAL SIGNIFICANCE: Resin composite bulk fill materials that can be used as a core-and-post cementation in an only stage are interesting, since they enable clinicians to work with one only material, and avoid several materials interfaces, technical sensitivity, and longer chair-time due to multistep procedures.

Comparison of Bio-C Pulpo and MTA Repair HP with White MTA: effect on liver parameters and evaluation of biocompatibility and bioactivity in rats.

AIM: To evaluate the tissue response promoted by Bio-C Pulpo (Bio), MTA Repair HP (MTA-HP) and White MTA (WMTA) and whether these materials cause liver changes in a rat experimental model. METHODOLOGY: Polyethylene tubes filled with Bio, MTA-HP and WMTA, and empty tubes (control group, CG) were implanted into the subcutaneous tissues of rats for 7, 15, 30 and 60 days. Inflammatory reaction score (IRS), capsule thickness, number of inflammatory cells (IC), von Kossa reaction, interleukin-6 (IL-6) and alkaline phosphatase (ALP) immunohistochemistry reactions were performed. Combined methods, von Kossa followed by immunohistochemistry for detection of ALP, were performed. At 60 days, the serum glutamic-oxaloacetic transaminase (GOT) and glutamic-pyruvic transaminase (GPT) levels were measured and liver fragments were collected for histological analysis; the data were assessed by one-way ANOVA analysis followed by Sidak's post-test. The biocompatibility and bioactivity data were subjected to the two-way ANOVA analysis followed by Tukey post hoc test, except the IRS. The IRS data were subjected to the Kruskal-Wallis ANOVA non-parametric test followed by Dunn's test (p ≤ .05). RESULTS: No significant difference was detected in serum GOT and GPT concentrations and in the number of hepatocytes among the experimental and CG samples. Although Bio-C Pulpo had the highest IC and IL-6-immunolabelled cells (p < 0.0001) at all periods, no significant difference was observed in the IRS among the materials, except at 60 days. In this period, the WMTA had lower IRS. All groups had a significant reduction in the capsule thickness and in the number of IC and IL-6-immunolabelled cells over time. Bio-C Pulpo, MTA-HP and WMTA specimens had greater immunoexpression of ALP than CG (p < .0001). At all periods, von Kossa-positive and birefringent structures were observed in the capsules around the materials. ALP-immunolabelled cells were also seen near von Kossa-positive structures. CONCLUSIONS: Bio-C Pulpo, MTA-HP and WMTA materials did not cause morphological changes in the liver and no significant alteration in the serum GOT and GPT levels. Moreover, these bioceramic materials were biocompatible and exhibited bioactive potential. However, Bio-C Pulpo induced greater inflammatory infiltrate than MTA-HP and WMTA at all periods.

Sodium Hypochlorite and Chlorhexidine Downregulate MMP Expression on Radicular Dentin.

OBJECTIVE: Matrix metalloproteinases (MMPs) are present in radicular dentin and can convert structural matrix proteins into signaling molecules; thus, these enzymes play an essential role in dentin biomineralization and tissue regeneration therapies. Their expression on radicular dentin may be affected by the irrigation solutions used during root canal treatments. This study aimed to evaluate the effects of the most common irrigants on radicular dentin MMP expression. MATERIALS AND METHODS: The experimental solutions were distilled water (control), 5% sodium hypochlorite (NaOCl), 18% ethylenediaminetetraacetic acid (EDTA), and 2% chlorhexidine (CHX). Samples were prepared from extracted human teeth. For zymography analysis, root sections were powderized, and dentin proteins were extracted to observe gelatinolytic activity. Root dentin slices were treated with the experimental solutions for immunohistochemical analysis using anti-MMP-2 and anti-MMP-9 antibodies. ANOVA and the Tukey test were performed. RESULTS: Zymograms revealed the presence of MMP-2, MMP-8, and MMP-20 in the control group and the EDTA-treated group. Immunohistochemistry confirmed the presence of MMP-2 and MMP-9 mainly associated with the dentinal tubule lumens and occasionally with intertubular dentin. NaOCl- and CHX-treated groups showed lower expression of MMPs than the control group. Immuno-staining for both proteinases in the EDTA-treated group showed higher expression compared to the other experimental groups. CONCLUSION: Our results showed that most common irrigants affect MMP expression on radicular dentin. Treatment with NaOCl and chlorhexidine resulted in lower expression of MMPs, while EDTA increased their expression in root canal dentin.

Micro-computed tomography high resolution evaluation of dimensional and morphological changes of 3 root-end filling materials in simulated physiological conditions.

The aim of this study was to evaluate volumetric and morphological stability of 3 root-end filling materials in addition to porosity and interface voids, using micro-computed tomography (µCT) in high resolution and a highly accurate approach for image analysis. Following root-end resection and apical preparation, two-rooted maxillary premolars were divided into three groups, according to the filling materials: White MTA Angelus, Biodentine, and IRM. Samples were scanned by µCT at 5 µm after the setting time and at time intervals of 7 and 30 days after immersion in phosphate-buffered saline (PBS). Volumetric and morphological changes besides material porosity and interface voids were evaluated by comparing initial values and those obtained after immersion. Data were analyzed statistically, using ANOVA and t-tests (α = 0.05). All materials showed volumetric stability. Regarding the morphological changes, Biodentine had a significant thickness reduction after storage in PBS when compared with MTA. Biodentine also showed an increase in porosity, as well as in percentage and thickness of voids after 30 days of immersion. In conclusion, µCT in high resolution and an accurate image analysis approach may be used to evaluate morphological changes of endodontic materials. Although Biodentine showed suitable adaptability and lower values of porosity than MTA, after PBS immersion there was a dimensional reduction of this material, besides an increase in porosity and interface voids.

In vivo and in vitro anti-inflammatory and pro-osteogenic effects of citrus cystatin CsinCPI-2.

Cystatins are natural inhibitors of cysteine peptidases. Recently, cystatins derived from plants, named phytocystatins, have been extensively studied. Among them, CsinCPI-2 proteins from Citrus sinensis were identified and recombinantly produced by our group. Thus, this study described the recombinant expression, purification, and inhibitory activity of this new phytocystatin against human cathepsins K and B and assessed the anti-inflammatory effect of CsinCPI-2 in vitro in mouse and in vivo in rats. In addition, the pro-osteogenic effect of CsinCPI-2 was investigated in vitro. The inflammatory response of mouse macrophage cells stimulated with P. gingivalis was modulated by CsinCPI-2. The in vitro results showed an inhibitory effect (p < 0.05) on cathepsin K, cathepsin B, IL-1ß, and TNF-α gene expression. In addition, CsinCPI-2 significantly inhibited in vivo the activity of TNF-α (p < 0.05) in the blood of rats, previously stimulated by E. coli lipopolysaccharide (LPS). CsinCPI-2 had a pro-osteogenic effect in human dental pulp cells, demonstrated by the increase in alkaline phosphatase (ALP) activity, deposition of mineralized nodules, and the gene expression of the osteogenic markers as bone morphogenetic protein 2 (BMP-2), runt-related transcription factor 2 (Runx-2), ALP, osteocalcin, and bone sialoprotein (BSP). These preliminary studies suggested that CsinCPI-2 has a potential anti-inflammatory, and at the same time, a pro-osteogenic effect. This may lead to new therapies for the control of diseases where inflammation plays a key role, such as periodontal disease and apical periodontitis.

Biodentine and MTA modulate immunoinflammatory response favoring bone formation in sealing of furcation perforations in rat molars.

OBJECTIVES: Evaluate the tissue reaction of periodontium subjacent to furcation perforations in rat molars sealed with Biodentine or mineral trioxide aggregate (MTA). MATERIALS AND METHODS: The pulp chamber floor of right upper first molars of 60 rats was perforated and filled with Biodentine, MTA, or cotton pellet (sham); the left first molars were used as control. After 7, 15, 30, and 60 days, maxillary fragments were processed for paraffin-embedding. The periodontal space (PS), volume density of inflammatory cells (VvIC) and fibroblasts (VvFb), number of osteoclasts, and collagen content were obtained. Interleukin-6 (IL-6) and osterix (osteoblast marker) were detected by immunohistochemistry. The data were submitted to ANOVA and Tukey's test (p ≤ 0.05). RESULTS: At 7 days, high values in VvIC, IL-6-immunolabeled cells, and osteoclasts were accompanied by reduced collagen content in enlarged PS of experimental groups. At all periods, VvIC, number of osteoclasts and IL-6, and PS were higher in sham than in Biodentine and MTA (p < 0.0001). From 7 to 60 days, significant reduction in VvIC, IL-6 immunoexpression, and osteoclasts was accompanied by significant increase in VvFb, osteoblasts, and collagen in Biodentine and MTA groups. At 60 days, significant differences in VvIC, PS, IL-6, osteoclasts, and osteoblasts were not found between Biodentine and MTA. Significant differences in the osteoclast number were not observed among Biodentine, MTA, and control groups while osteoblasts number was higher in Biodentine and MTA groups. CONCLUSIONS: Despite the initial inflammatory reaction and bone resorption, the sealing of furcation perforations with Biodentine and MTA favors the repair of periodontal tissues. CLINICAL RELEVANCE: Biodentine and MTA exhibit potential as repair material in the treatment of furcation perforations.

Shaping ability of rotary or reciprocating systems for oval root canal preparation: a micro-computed tomography study.

OBJECTIVES: To evaluate the shaping ability and cleaning after oval root canal preparation using one or more instruments in reciprocating or rotary motion. MATERIALS AND METHODS: Oval-shaped mandibular incisors were selected, based on the radiographic diameter (2 ≤ diameter ratio ≤ 4), and assigned according to root canal preparation (n = 18): single-file (Reciproc R40); two reciprocating files (Unicone size 20 and 40, .06 taper) or Mtwo rotary files until a size 40, .06 taper instrument. Root canal preparations were performed using an open root canal model. Scanning was performed before and after preparation using SkyScan 1176 with a voxel size of 17.42 µm. Volume, percentage of debris, and percentage of uninstrumented surface were analyzed in the entire root canal and in each root canal third. Data were compared using ANOVA and Tukey or Kruskal-Wallis and Dunn tests (α = 5%). RESULTS: The initial volume were similar among the groups (p > .05). Unicone preparation was associated with higher debris, increase in root canal volume and uninstrumented surface in entire root canal and in the middle third (P < .05). Mtwo was associated with lower uninstrumented surface in the entire root canal and in the cervical third. The apical third were similar for the three preparations. CONCLUSIONS: Unicone system using two instruments in reciprocating motion resulted in higher increase in volume. However, less remaining debris was observed when Reciproc single-file and Mtwo rotary systems were used. CLINICAL RELEVANCE: A preparation that volumetrically increases the root canal is not necessarily associated with better cleaning. Shaping and hard-tissue debris removal depends on root canal anatomy, kinematics, number of instruments, and instrument design.

Correction to: Cyclic fatigue and torsional strength of three different thermally treated reciprocating nickel-titanium instruments.

The original version of this article contained a mistake. The name Jader Carvalho Pinto should have been Jader Camilo Pinto.

Cyclic fatigue and torsional strength of three different thermally treated reciprocating nickel-titanium instruments.

OBJECTIVES: The aim of this study was to evaluate the cyclic and torsional fatigue resistance of the reciprocating single-file systems Reciproc Blue 25.08 (VDW GmbH, Munich, Germany), Prodesign R 25.06 (Easy Dental Equipment, Belo Horizonte, Brazil), and WaveOne Gold 25.07 (Dentsply/Tulsa Dental Specialties, Tulsa, OK, USA). MATERIALS AND METHODS: Sixty reciprocating instruments of the systems Reciproc Blue R25 (RB #25 .08 taper), Prodesign R (PDR #25 .06 taper), and WaveOne Gold (WOG #25 .07 taper) (n = 20) were used. Cyclic fatigue resistance testing was performed by measuring the time to failure in an artificial stainless steel canal with a 60° angle of curvature and a 5-mm radius located 5 mm from the tip (n = 10). The torsional test (ISO 3630-1) evaluated the torque and angle of rotation at failure of new instruments (n = 10) in the portion 3 mm from the tip. The fractured surface of each fragment was also observed using scanning electron microscopy (SEM). In addition, a supplementary examination was performed to measure the cross-sectional area of each instrument 3 and 5 mm from the tip. The data were analyzed using one-way ANOVA and Tukey's test, and the level of significance was set at 5%. RESULTS: The cyclic fatigue resistance values of PDR 25.06 were significantly higher (P < 0.05). RB 25.08 showed higher fatigue resistance than WOG 25.07 (P < 0.05). The torsional test showed that PDR 25.06 had lower torsional strength (P < 0.05). No differences were observed between RB 25.08 and WOG 25.07 (P > 0.05). PDR 25.06 showed higher angular rotation values than RB 25.08 and WOG 25.07 (P < 0.05). RB 25.08 presented higher angular rotation than WOG 25.07 (P < 0.05). The cross-sectional area analysis showed that PDR 25.06 presented the smallest cross-sectional areas at 3 and 5 mm from the tip (P < 0.05). CONCLUSION: PDR 25.06 presented the highest cyclic fatigue resistance and angular rotation until fracture compared to RB 25.08 and WOG 25.07. In addition, RB 25.08 and WOG 25.07 had higher torsional strength than PDR 25.06. CLINICAL RELEVANCE: In endodontic practice, thermally treated reciprocating instruments have been used for the root canal preparation of curved and constricted canals; therefore, these instruments should present high flexibility and suitable torsional strength to minimize the risk of instrument fracture.

Intermittent or continuous ultrasonically activated irrigation: micro-computed tomographic evaluation of root canal system cleaning.

OBJECTIVES: The aim of this study was to evaluate the efficacy of two passive ultrasonic irrigation (PUI) methods and conventional manual irrigation (CMI) in root canal system (RCS) cleaning. MATERIALS AND METHODS: Artificial single-rooted teeth were used. Four lateral canals were made 2 and 7 mm short from the apex. Root canals were filled with a contrast solution. The specimens were divided into four groups (n = 8): PUI1-intermittent flushing; PUI2-continuous flushing; CMI1-at 1 mm; and CMI2-at 3 mm. Micro-computed tomographic images were obtained. New images were taken after the irrigation protocols enabling the evaluation of the contrast solution volume (in mm(3)) within RCS (main and lateral root canals) in comparison to the initial analysis. The comparison among groups was performed using ANOVA and Tukey's tests with 5 % significance level. RESULTS: There was no difference among PUI1, PUI2, and CMI1 regarding the contrast solution removal from RCS (p > 0.05). These methods demonstrated greater cleaning than CMI2. At the apical third, CMI2 showed lower cleaning capacity when compared to the other methods (p < 0.05). CONCLUSIONS: PUI with intermittent or continuous flushing and CMI with the needle placed 1 mm from the working length were efficient in cleaning the main and lateral root canals. CLINICAL RELEVANCE: Root canal irrigation plays an important role in cleaning and disinfection of the RCS. Effective apical irrigation is an important procedure during root canal treatment. PUI and CMI (at 1 mm short) were effective in cleaning of the main and simulated lateral root canals.

Effect of ultrasonic tip and root-end filling material on bond strength.

OBJECTIVES: The objective of this study was to evaluate the bond strength of three root-end filling materials (MTAA-MTA Angelus, MTAS-experimental MTA Sealer, and ZOE- zinc oxide and eugenol cement) in retrograde preparations performed with different ultrasonic tips (CVD, Trinity, and Satelec). MATERIALS AND METHOD: Ninety 2-mm root sections from single-rooted human teeth were used. The retrograde cavities were prepared by using the ultrasonic tips, coupled to a device for position standardization. The specimens were randomly divided into nine groups: CVD MTAA; CVD MTAS; CVD ZOE; Trinity MTAA; Trinity MTAS; Trinity ZOE; Satelec MTAA; Satelec MTAS; Satelec ZOE. Each resin disc/dentin/root-end filling material was placed in the machine to perform the push-out test. The specimens were examined in a stereomicroscope to evaluate the type of failure. Data were submitted to statistical analysis using ANOVA and Tukey tests (α = 0.05). RESULTS: The highest bond strength was observed for the CVD tip irrespective of the material used (P < 0.05). There was no significant difference for the Trinity TU-18 diamond and S12 Satelec tips (P > 0.05). MTAA and MTAS showed highest bond strength. The most common type of failure was adhesion between the filling material and dentin wall, except for ZOE, where mixed failure was predominant. CONCLUSIONS: The CVD tip favored higher bond strength of the root-end filling materials. MTA Angelus and experimental MTAS presented bond strength to dentin prepared with ultrasonic tips. CLINICAL RELEVANCE: Root-end preparation with the CVD tip positively influences the bond strength of root-end filling materials. MTA Angelus and experimental MTAS present bond strength to be used as root-end filling materials.

Physicochemical properties of calcium silicate cements associated with microparticulate and nanoparticulate radiopacifiers.

OBJECTIVES: The objective of this paper was to evaluate the physicochemical properties of calcium silicate cements with different chemical compositions, associated with radiopacifying agents. MATERIALS AND METHODS: Mineral trioxide aggregate (MTA) Angelus, calcium silicate cement with additives (CSC), and resinous calcium silicate cement (CSCR) were evaluated, with the addition of the following radiopacifiers: microparticles (micro) or nanoparticles (nano) of zirconium oxide (ZrO(2)), niobium oxide (Nb(2)O(5)), bismuth oxide (Bi(2)O(3)), or calcium tungstate (CaWO(4)). Setting time was evaluated using Gilmore needles. Solubility was determined after immersion in water. The pH and calcium ion release were analyzed after 3, 12, and 24 h and 7, 14, and 21 days. The data obtained were submitted to analysis of variance and Tukey's test, at a level of significance of 5 %. RESULTS: CSC + CaWO(4) and CSCR + ZrO(2) micro, Nb(2)O(5) and CaWO(4) presented results similar to MTA, with a shorter final setting time than the other associations. CSC and CSCR+ ZrO(2) micro presented a higher degree of flow. All the cements evaluated presented low solubility. The materials presented alkaline pH and released calcium ions. CONCLUSIONS: ZrO(2) micro radiopacifier may be considered a potential substitute for Bi(2)O(3) when associated with CSC or CSCR. CLINICAL RELEVANCE: The proposed materials, especially when associated with ZrO(2), are potential materials for use as alternatives to MTA.

Photodynamic therapy in root canals contaminated with Enterococcus faecalis using curcumin as photosensitizer.

The aim of the study was to evaluate the photodynamic therapy (PDT) effect on root canals contaminated with Enterococcus faecalis using a light emitting diode (LED) light and a curcumin solution (CUR) as photosensitizer (PS). Eighty root canals from uniradicular human teeth were prepared with Protaper Universal rotary system and contaminated with E. faecalis for 21 days. They were divided as: GIa-PDT (CUR, pre-irradiation for 5 + 5 min of irradiation); GIb-PDT (CUR, pre-irradiation for 5 + 10 min of irradiation); GIIa-(CUR, pre-irradiation for 5 + 5 min without irradiation); GIIb-(CUR pre-irradiation for 5 + 10 min of irradiation); GIIIa-(physiological solution and irradiation for 5 min); and GIIIb-(physiological solution and irradiation for 10 min); positive and negative control groups. Collections from root canals were made at time intervals of 21 days after contamination, immediately after treatment, and 7 days after treatment, and submitted to colony forming units per milliter (CFU mL(-1)) counts. The data were submitted to ANOVA and Tukey multiple comparison tests, at a level of significance of 5 %. In the immediate post-treatment collection, group GIa showed greater bacterial reduction in comparison with GIIa, GIIb, GIIIa, GIIIb, and positive control (P < 0.05). At 7 days post-treatment, GIa showed significant bacterial reduction only in comparison with GIIIa (P < 0.05). Curcumin as sensitizer was effective by 5 min LED irradiation but not by 10 min irradiation PDT using LED light, and curcumin as PS was not effective in eliminating E. faecalis. No difference was observed for periods of irradiation.

Niobium pentoxide as radiopacifying agent of calcium silicate-based material: evaluation of physicochemical and biological properties.

OBJECTIVES: The physicochemical properties and the tissue reaction promoted by microparticulated or nanoparticulated niobium pentoxide (Nb2O5) added to calcium silicate-based cement (CS), compared to MTA-Angelus™, were evaluated. MATERIALS AND METHODS: Materials were submitted to the tests of radiopacity, setting time, pH, and calcium ion release. Polyethylene tubes filled with the materials were implanted into rats subcutaneously. After 7, 15, 30, and 60 days, the specimens were fixed and embedded in paraffin. Hematoxylin & eosin (H&E)-stained sections were used to compute the number of inflammatory cells (IC). Interleukin-6 (IL-6) detection was performed, and the number of immunolabeled cells was obtained; von Kossa method was also carried out. Data were subjected to ANOVA and Tukey test (p ≤ 0.05). RESULTS: Nb2O5micro and Nb2O5nano provided to the CS radiopacity values (3.52 and 3.75 mm Al, respectively) superior to the minimum recommended. Groups containing Nb2O5 presented initial setting time significantly superior than mineral trioxide aggregate (MTA). All materials presented an alkaline pH and released calcium ions. The number of IC and IL-6 immunolabeled cells in the CS + Nb2O5 groups was significantly reduced in comparison to MTA in all periods. von Kossa-positive structures were observed adjacent to implanted materials in all periods. CONCLUSIONS: The addition of Nb2O5 to the CS resulted in a material biocompatible and with adequate characteristics regarding radiopacity and final setting time and provides an alkaline pH to the environment. Furthermore, the particle size did not significantly affect the physicochemical and biological properties of the calcium silicate-based cement. CLINICAL RELEVANCE: Niobium pentoxide can be used as radiopacifier for the development of calcium silicate-based materials.