Synthesis and Structure Evolution in Metal Carbazole Diphosphonates Followed by Electron Diffraction.

To access porous metal phosphonates, a new V-shaped, rigid, and sterically demanding diphosphonic acid, namely 3,6-diphosphono-9H-carbazole (H4L), was designed and employed in a high-throughput investigation. Screening of different metal salts and subsequent optimization studies resulted in the isolation of two porous metal phosphonates [Cu2(H2O)2(L)]·2H2O (CAU-37) and [Zn6.75(H2O)1.5(HL)2.5(L)1.5]·8H2O (CAU-57). Structure determination was accomplished by electron diffraction and the dehydration behavior of CAU-37 was followed in situ. A rare case of intralayer water de-/adsorption in CAU-37 was found which leads to a cell volume change of 11.9%. Rod-shaped inorganic building units (IBUs) are connected to layers and structural flexibility is due to "accordion-like" structural changes within the layers. In contrast, in CAU-57 a layered IBU is found, which usually results in the formation of dense structures. Due to the shape and rigidity of the linker, the interconnection of the IBUs results in the formation of pores. Water sorption measurements in combination with powder X-ray diffraction data confirmed the reversibility under structural retention.

Exploring the Isoreticular Continuum between Phosphonate- and Phosphinate-Based Metal-Organic Frameworks.

The rational design of metal-organic frameworks (MOFs) is one of the driving forces behind the great success that this class of materials is experiencing. The so-called isoreticular approach is a key design tool, very often used to tune the size, steric properties, and additional functional groups of the linker used. In this work, we go one step further and show that even linkers with two different coordinating groups, namely, phosphonate and phosphinate, can form isoreticular MOFs. This effectively bridges the gap between MOFs utilizing phosphinate and phosphonate coordinating groups. Using a novel bifunctional ligand, 4-[hydroxy(methyl)phosphoryl]phenylphosphonic acid [H3PPP(Me)], we were able to prepare ICR-12, a MOF isoreticular to already published MOFs containing bisphosphinate linkers (e.g., ICR-4). An isostructural MOF ICR-13 was also successfully prepared using 1,4-benzenediphosphonic acid. We envisage that this strategy can be used to further enlarge the pool of MOFs.

An alternative C-P cross-coupling route for the synthesis of novel V-shaped aryldiphosphonic acids.

The synthesis of phosphonate esters is a topic of interest for various fields, including the preparation of phosphonic acids to be employed as organic linkers for the construction of metal phosphonate materials. We report an alternative method that requires no solvent and involves a different order of addition of reactants to perform the transition-metal-catalyzed C-P cross-coupling reaction, often referred to as the Tavs reaction, employing NiCl2 as a pre-catalyst in the phosphonylation of aryl bromide substrates using triisopropyl phosphite. This new method was employed in the synthesis of three novel aryl diphosphonate esters which were subsequently transformed to phosphonic acids through silylation and hydrolysis.

In†Situ X-ray Diffraction Investigation of the Crystallisation of Perfluorinated CeIV -Based Metal-Organic Frameworks with UiO-66 and MIL-140 Architectures*.

We report on the results of an in situ synchrotron powder X-ray diffraction study of the crystallisation in aqueous medium of two recently discovered perfluorinated CeIV -based metal-organic frameworks (MOFs), analogues of the already well investigated ZrIV -based UiO-66 and MIL-140A, namely, F4_UiO-66(Ce) and F4_MIL-140A(Ce). The two MOFs were originally obtained in pure form in similar conditions, using ammonium cerium nitrate and tetrafluoroterephthalic acid as reagents, and small variations of the reaction parameters were found to yield mixed phases. Here, we investigate the crystallisation of these compounds, varying parameters such as temperature, amount of the protonation modulator nitric acid and amount of the coordination modulator acetic acid. When only HNO3 is present in the reaction environment, only F4_MIL-140A(Ce) is obtained. Heating preferentially accelerates nucleation, which becomes rate determining below 57 °C. Upon addition of AcOH to the system, alongside HNO3 , mixed-phased products are obtained. F4_UiO-66(Ce) is always formed faster, and no interconversion between the two phases occurs. In the case of F4_UiO-66(Ce), crystal growth is always the rate-determining step. A higher amount of HNO3 favours the formation of F4_MIL-140A(Ce), whereas increasing the amount of AcOH favours the formation of F4_UiO-66(Ce). Based on the in situ results, a new optimised route to achieving a pure, high-quality F4_MIL-140A(Ce) phase in mild conditions (60 °C, 1 h) is also identified.

"Shake 'n Bake" Route to Functionalized Zr-UiO-66 Metal-Organic Frameworks.

We report a novel synthetic procedure for the high-yield synthesis of metal-organic frameworks (MOFs) with fcu topology with a UiO-66-like structure starting from a range of commercial ZrIV precursors and various substituted dicarboxylic linkers. The syntheses are carried out by grinding in a ball mill the starting reagents, namely, Zr salts and the dicarboxylic linkers, in the presence of a small amount of acetic acid and water (1 mL total volume for 1 mmol of each reagent), followed by incubation at either room temperature or 120 °C. Such a simple "shake 'n bake" procedure, inspired by the solid-state reaction of inorganic materials, such as oxides, avoids the use of large amounts of solvents generally used for the syntheses of Zr-MOF. Acidity of the linkers and the amount of water are found to be crucial factors in affording materials of quality comparable to that of products obtained under solvo- or hydrothermal conditions.

Influence of Water in the Synthesis of the Zirconium-Based Metal-Organic Framework UiO-66: Isolation and Reactivity of [ZrCl(OH)2(DMF)2]Cl.

We recently discovered that aging a solution of zirconium(IV) tetrachloride (ZrCl4) in N,N-dimethylformamide (DMF) in the presence of water, followed by the addition of a terephthalic acid linker, reduces the crystallite size of the metal-organic framework UiO-66 (Chem. Commun. 2016, 52, 6411-6414). In an effort to shed light on the nature of the aging effect and on its relationship with the crystallite size of UiO-66, we report here the isolation and structural characterization of a microcrystalline zirconium-based compound of the formula [ZrCl(OH)2(DMF)2]Cl, which is formed during the aging process. The Zr(IV) ions are coordinated by hydroxide, DMF, and chloride to produce a one-dimensional polymer. Thanks to the presence of two -OH groups per zirconium atom, [ZrCl(OH)2(DMF)2]Cl is a suitable precursor for the synthesis of UiO-66 in dry DMF, affording a product having a smaller crystallite size than that obtained from a reaction mixture having the same chemical composition but using ZrCl4 as the Zr(IV) source. By starting from ZrCl4 and generating [ZrCl(OH)2(DMF)2]Cl in situ in solution through aging, we obtained smaller crystallites as the aging time increased, proving that [ZrCl(OH)2(DMF)2]Cl plays a role in the aging process. The possible role of [ZrCl(OH)2(DMF)2]Cl in the crystallization mechanism of UiO-66 is also discussed, with emphasis on its relationship with the amount of water in the reaction mixture.

Post-Synthetic Ligand Exchange in Zirconium-Based Metal-Organic Frameworks: Beware of The Defects!

Post-synthetic ligand exchange in the prototypical zirconium-based metal-organic framework (MOF) UiO-66 was investigated by in situ solution 1 H NMR spectroscopy. Samples of UiO-66 having different degrees of defectivity were exchanged using solutions of several terephthalic acid analogues in a range of conditions. Linker exchange only occurred in defect-free UiO-66, whereas monocarboxylates grafted at defect sites were found to be preferentially exchanged with respect to terephthalic acid over the whole range of conditions investigated. A 1:1 exchange ratio between the terephthalic acid analogue and modulator was observed, providing evidence that the defects had missing-cluster nature. Ex situ characterisation of the MOF powders after exchange corroborated these findings and showed that the physical-chemical properties of the MOF depend on whether the functionalisation occurs at defective sites or on the framework.

Mixed-linker UiO-66: structure-property relationships revealed by a combination of high-resolution powder X-ray diffraction and density functional theory calculations.

The use of mixed-linker metal-organic frameworks (MIXMOFs) is one of the most effective strategies to modulate the physical-chemical properties of MOFs without affecting the overall crystal structure. In many instances, MIXMOFs have been recognized as solid solutions, with random distribution of ligands, in agreement with the empirical rule known as Vegard's law. In this work, we have undertaken a study combining high-resolution powder X-ray diffraction (HR-PXRD) and density functional theory (DFT) calculations with the aim of understanding the reasons why UiO-66-based amino- and bromo-functionalized MIXMOFs (MIXUiO-66) undergo cell expansion obeying Vegard's law and how this behaviour is related to their physical-chemical properties. DFT calculations predict that the unit cell in amino-functionalized UiO-66 experiences only minor expansion as a result of steric effects, whereas major modification to the electronic features of the framework leads to weaker metal-linker interaction and consequently to the loss of stability at higher degrees of functionalization. For bromo-functionalized UiO-66, steric repulsion due to the size of bromine yields a large cell expansion, but the electronic features remain very similar to pristine UiO-66, preserving the stability of the framework upon functionalization. MIXUiO-66 obtained by either direct synthesis or by post-synthetic exchange shows Vegard-like behaviour, suggesting that both preparation methods yield solid solutions, but the thermal stability and the textural properties of the post-synthetic exchanged materials do not display a clear dependence on the chemical composition, as observed for the MOFs obtained by direct synthesis.

Continuous-Flow Microwave Synthesis of Metal-Organic Frameworks: A Highly Efficient Method for Large-Scale Production.

Metal-organic frameworks are having a tremendous impact on novel strategic applications, with prospective employment in industrially relevant processes. The development of such processes is strictly dependent on the ability to generate materials with high yield efficiency and production rate. We report a versatile and highly efficient method for synthesis of metal-organic frameworks in large quantities using continuous flow processing under microwave irradiation. Benchmark materials such as UiO-66, MIL-53(Al), and HKUST-1 were obtained with remarkable mass, space-time yields, and often using stoichiometric amounts of reactants. In the case of UiO-66 and MIL-53(Al), we attained unprecedented space-time yields far greater than those reported previously. All of the syntheses were successfully extended to multi-gram high quality products in a matter of minutes, proving the effectiveness of continuous flow microwave technology for the large scale production of metal-organic frameworks.

Amino-Functionalized Layered Crystalline Zirconium Phosphonates: Synthesis, Crystal Structure, and Spectroscopic Characterization.

Two new layered zirconium phosphonates functionalized with amino groups were synthesized starting from aminomethylphosphonic acid in the presence of different mineralizers, and their structures were solved from powder X-ray diffraction data. Their topologies are unprecedented in zirconium phosphonate chemistry: the first, of formula ZrH[F3(O3PCH2NH2)], prepared in the presence of hydrofluoric acid, features uncommon ZrO2F4 units and a remarkable thermal stability; the second, of formula Zr2H2[(C2O4)3(O3PCH2NH2)2]·2H2O, prepared in the presence of oxalic acid, is based on ZrO7 units with oxalate anions coordinated to the metal atom, which were never observed before in any zirconium phosphonate. In addition, the structure of another compound based on (2-aminoethyl)phosphonic acid is reported, which was the object of a previously published study. This compound has layered α-type structure with -NH3(+) groups located in the interlayer space. All of the reported compounds were further characterized by means of vibrational spectroscopy, which provided important information on fine structural details that cannot be deduced from the powder X-ray diffraction data.

A layered mixed zirconium phosphate/phosphonate with exposed carboxylic and phosphonic groups: X-ray powder structure and proton conductivity properties.

A novel mixed zirconium phosphate/phosphonate based on glyphosine, of formula Zr2(PO4)H5(L)2·H2O [L = (O3PCH2)2NCH2COO], was synthesized in mild conditions. The compound has a layered structure that was solved ab initio from laboratory PXRD data. It crystallizes in the monoclinic C2/c space group with the following cell parameters: a = 29.925(3), b = 8.4225(5), c = 9.0985(4) Å, and ß = 98.474(6)°. Phosphate groups are placed inside the sheets and connect the zirconium atoms in a tetradentate fashion, while uncoordinated carboxylate and P-OH phosphonate groups are exposed on the layer surface. Due to the presence of these acidic groups, the compound showed remarkable proton conductivity properties, which were studied in a wide range of temperature and relative humidity (RH). The conductivity is strongly dependent on RH and reaches 1 × 10(-3) S cm(-1) at 140 °C and 95% RH. At this RH, the activation energy of conduction is 0.15 eV in the temperature range 80-140 °C. The similarities of this structure with related structures already reported in the literature were also discussed.

Layered metal(IV) phosphonates with rigid pendant groups: new synthetic approaches to nanosized zirconium phosphate phenylphosphonates.

Single phase mixed zirconium phosphate phenylphosphonates, ZrP(PP)x, were prepared by two different synthetic approaches: reaction of gels of nanosized α-zirconium phosphate in propanol with solutions of phenylphosphonic acid (H2PP), leading to the topotactic exchange of monohydrogen phosphate groups with phenylphosphonate groups, and precipitation from propanol solutions of H2PP, phosphoric acid, and zirconyl propionate. In both cases, propanol intercalated compounds were obtained. The x values of the ZrP(PP)x materials prepared by topotactic anion exchange ranged from 0.37 to 0.56 for (H2PP/Zr) molar ratios in the range 0.52-4.16 and [H2PP] = 0.1 M, while a maximum x value of 0.73 was only reached at 60 °C, with (H2PP/Zr) = 4.16 and [H2PP] = 0.31 M. Direct precipitation of ZrP(PP)x provided samples with 0.13 ≤ x ≤ 1.54, for H2PP molar fractions in the range 0.05-0.5 and (P/Zr) molar ratio = 6. At 90% relative humidity, the (H2O/Zr) molar ratio for the precipitated ZrP(PP)x powder samples increased in the range 1.3-3.0 with increasing x and resulted in being higher than that of nanosized ZrP (0.8). The analysis of the X-ray diffraction patterns of the gel and powder samples, together with the hydration data of the powder samples, suggested a structural model in which the random distribution of the phosphate and phenylphosphonate groups creates cavities which can accommodate propanol molecules in the gel samples and water molecules in the hydrated powder samples.

Exploring metal carbamates as precursors for the synthesis of metal-organic frameworks.

In the synthesis of metal-organic frameworks (MOFs), the choice of the metal precursor plays a key role because of the influence that it can exert on the crystallization kinetics. The present work explores the use of metal-carbamato complexes for the synthesis of benchmark MOFs, namely HKUST-1 and UiO-66. Cu2(O2CNEt2)4·2NHEt2 and Zr(O2CNEt2)4, prepared using straightforward CO2 fixation reactions starting from the corresponding metal chlorides and diethylamine, were employed as metal precursors for MOF formation. The synthesis conditions, including the solvent, temperature, and ligand protonation degree, were systematically investigated, revealing metal carbamates as highly reactive precursors due to their prompt release of CO2 and amine upon reaction with protic species, i.e., the polycarboxylic linkers. This property of metal carbamates allowed us to identify room temperature protocols to achieve MOFs with comparable properties to those obtained using traditional metal precursors. Subsequent optimization of the reaction conditions led to the design of a one-pot synthetic strategy for HKUST-1, starting directly from copper(II) chloride and diethylamine under a CO2 atmosphere. The MOFs were characterized using various techniques, including powder X-ray diffraction, N2 sorption analysis, 1H nuclear magnetic resonance spectroscopy, and CHN elemental analysis, and compared to reference samples prepared according to literature procedures.

Synthesis, crystal structure, and proton conductivity of one-dimensional, two-dimensional, and three-dimensional zirconium phosphonates based on glyphosate and glyphosine.

The reaction of two small phosphono-amino acids based on glycine (glyphosine and glyphosate) with zirconium under mild conditions led to the attainment of three related zirconium derivatives with 1D, 2D, and 3D structures of formulas ZrF[H3(O3PCH2NHCH2COO)2] (1), Zr3H8[(O3PCH2)2NCH2COO]4·2H2O (2), and Zr[(O3PCH2)(HO3PCH2)NHCH2COOH]2·2H2O (3), respectively, whose structures were solved by X-ray powder and single-crystal diffraction data. The glyphosate derivative has 1D ribbon-type structure whereas the dimensionality of the glyphosine-derived materials (2D and 3D) can be tuned by changing the synthesis conditions. The low-dimensional compounds (1 and 2) can be directly produced in the form of nanoparticles with different size and morphology whereas the 3D compound (3) has a higher crystallinity and can be obtained as single crystals with a prismatic shape. The different structural dimensionality reflects the shape and size of the crystals and also differently affects the proton conductivity properties, measured over a wide range of temperature at 95% relative humidity. Their high thermal and chemical stability together with the small size may promote their use as fillers for polymeric electrolyte membranes for fuel cells applications.

Water-based synthesis and nitrate release properties of a ZrIV-based metal-organic framework derived from L-aspartic acid.

We report the synthesis and characterisation of a cationic metal-organic framework (MOF) based on ZrIV and L-aspartate and containing nitrate as an extra framework counteranion, named MIP-202-NO3. The ion exchange properties of MIP-202-NO3 were preliminarily investigated to evaluate its potential as a platform for controlled release of nitrate, finding that it readily releases nitrate in aqueous solution.

Cooperative CO2 adsorption mechanism in a perfluorinated CeIV-based metal organic framework.

Adsorbents able to uptake large amounts of gases within a narrow range of pressure, i.e., phase-change adsorbents, are emerging as highly interesting systems to achieve excellent gas separation performances with little energy input for regeneration. A recently discovered phase-change metal-organic framework (MOF) adsorbent is F4_MIL-140A(Ce), based on CeIV and tetrafluoroterephthalate. This MOF displays a non-hysteretic step-shaped CO2 adsorption isotherm, reaching saturation in conditions of temperature and pressure compatible with real life application in post-combustion carbon capture, biogas upgrading and acetylene purification. Such peculiar behaviour is responsible for the exceptional CO2/N2 selectivity and reverse CO2/C2H2 selectivity of F4_MIL-140A(Ce). Here, we combine data obtained from a wide pool of characterisation techniques - namely gas sorption analysis, in situ infrared spectroscopy, in situ powder X-ray diffraction, in situ X-ray absorption spectroscopy, multinuclear solid state nuclear magnetic resonance spectroscopy and adsorption microcalorimetry - with periodic density functional theory simulations to provide evidence for the existence of a unique cooperative CO2 adsorption mechanism in F4_MIL-140A(Ce). Such mechanism involves the concerted rotation of perfluorinated aromatic rings when a threshold partial pressure of CO2 is reached, opening the gate towards an adsorption site where CO2 interacts with both open metal sites and the fluorine atoms of the linker.

Increased CO2 Affinity and Adsorption Selectivity in MOF-801 Fluorinated Analogues.

The novel ZrIV-based perfluorinated metal-organic framework (PF-MOF) [Zr6O4(OH)4(TFS)6] (ZrTFS) was prepared under solvent-free conditions using the commercially available tetrafluorosuccinic acid (H2TFS) as a bridging ditopic linker. Since H2TFS can be seen as the fully aliphatic and perfluorinated C4 analogue of fumaric acid, ZrTFS was found to be isoreticular to zirconium fumarate (MOF-801). The structure of ZrTFS was solved and refined from X-ray powder diffraction data. Despite this analogy, the gas adsorption capacity of ZrTFS is much lower than that of MOF-801; in the former, the presence of bulky fluorine atoms causes a considerable window size reduction. To have PF-MOFs with more accessible porosity, postsynthetic exchange (PSE) reactions on (defective) MOF-801 suspended in H2TFS aqueous solutions were carried out. Despite the different H2TFS concentrations used in the PSE process, the exchanges yielded two mixed-linker materials of similar minimal formulae [Zr6O4(µ3-OH)4(µ1-OH)2.08(H2O)2.08(FUM)4.04(HTFS)1.84] (PF-MOF1) and [Zr6O4(µ3-OH)4(µ1-OH)1.83(H2O)1.83(FUM)4.04(HTFS)2.09] (PF-MOF2) (FUM2- = fumarate), where the perfluorinated linker was found to fully replace the capping acetate in the defective sites of pristine MOF-801. CO2 and N2 adsorption isotherms collected on all samples reveal that both CO2 thermodynamic affinity (isosteric heat of adsorption at zero coverage, Qst) and CO2/N2 adsorption selectivity increase with the amount of incorporated TFS2-, reaching the maximum values of 30 kJ mol-1 and 41 (IAST), respectively, in PF-MOF2. This confirms the beneficial effect coming from the introduction of fluorinated linkers in MOFs on their CO2 adsorption ability. Finally, solid-state density functional theory calculations were carried out to cast light on the structural features and on the thermodynamics of CO2 adsorption in MOF-801 and ZrTFS. Due to the difficulties in modeling a defective MOF, an intermediate structure containing both linkers in the framework was also designed. In this structure, the preferential CO2 adsorption site is the tetrahedral pore in the "UiO-66-like" structure. The extra energy stabilization stems from a hydrogen bond interaction between CO2 and a hydroxyl group on the inorganic cluster.

New hybrid zirconium aminophosphonates containing piperidine and bipiperidine groups.

The reaction of N-(phosphonomethyl)piperidine and N,N'-bis(phosphonomethyl)bipiperidine with zirconium(IV) in hydrofluoric acid media led to the preparation of two new zirconium fluoride phosphonate derivatives with 1D and 2D structure, respectively. Their structures were solved ab initio from laboratory powder X-ray diffraction (PXRD) data. The monophosphonate derivative, with formula ZrF(2)(HF)(O(3)PCH(2)NC(5)H(10)), has a 1D structure (triclinic, space group P ̅1, a = 6.6484(3) Å, b = 7.1396(3) Å, c = 12.2320(6) Å, α = 77.932(4)°, ß = 87.031(6)°, γ = 78.953(5)°, V = 557.22(4) Å(3), and Z = 2) made of inorganic chains constituted from the connection of zirconium octahedra and phosphorus tetrahedra with the piperidine groups bonded on their external part. The diphosphonate derivative, with formula Zr(2)F(4)(HF)(2)(O(3)PCH(2))NC(10)H(18)N(CH(2)PO(3)), has a 2D structure (triclinic, space group P ̅1, a = 6.6243(3) Å, b = 7.2472(4) Å, c = 12.2550(7) Å, α = 102.879(4)°, ß = 100.29(1)°, γ = 101.287(7)°, V = 547.03(4) Å(3), and Z = 1) composed of the packing of covalent layers whose structure may be ideally obtained by the joining of adjacent chains of the 1D compound. In these hybrid layers, inorganic regions made of the connectivity of zirconium octahedra and phosphorus tetrahedra alternate with organic regions represented by the bipiperidine moieties. A section dedicated to vibrational spectroscopy analysis is also included, mainly devoted to clarify some issues not easily deducible on the basis of PXRD data and to describe the fluorine environment inside zirconium phosphonate structures.