RESUMO
In this paper the binding of noscapine (NOS) as an anticancer drug with poor bioavailability and low solubility with beta and methyl-beta cyclodextrins (ß-CD and M-ß-CD) as the biocompatible drug carriers were discussed using ultraviolet-visible, fluorescence and nuclear magnetic resonance spectroscopy, as well as molecular docking. The absorption of NOS changed when it was bound to both cyclodextrins, resulting in a hyperchromic shift. It formed a 1:1 stoichiometry inclusion complex with both cyclodextrins according to the Benesi-Hildebrand equation. The binding affinity was larger in NOS-M-ß-CD (5.9 (± 0.66) × 103 M- 1) than NOS-ß-CD (3.7 (± 0.22) × 103 M- 1) complex. The fluorescence emission band of NOS at 408 nm was quenched when NOS was complexed with ß-CD, and enhanced in the presence of M-ß-CD, while the shoulder at 350 nm was enhanced selectively when NOS was complexed with M-ß-CD. The fluorescence quenching of NOS with ß-CD showed a negative deviation from the Stern-Volmer. The thermodynamic parameters have been estimated with the help of the Van't Hoff equation in different temperatures, and a dynamic mechanism was proposed for quenching. Also, both ΔH and ΔS have positive values thus the main interactions result in hydrophobic forces. Moreover, the negative value of ΔG indicates that the bonding process is spontaneous. 1H NMR chemical shift changes were observable for NOS and both CDs protons due to the chemical environment changes of some nuclei upon complexation. The molecular docking results revealed that the 1:1 inclusion complex possesses a good molecular shape complementarity score for their most probable structures, and indicated that the M-ß-CD inclusion system gave the higher complexation efficiency. The binding energy values for ß-CD and M-ß-CD were determined to be -6.7 and - 9.5 kcal/mol, respectively. These findings suggest the same as the result of experimental tests that the NOS-M-ß-CD complex is more stable than the NOS-ß-CD complex.
RESUMO
Since the outbreak of the COVID-19 pandemic, the use of antiviral and other available drugs has been considered to combat or reduce the clinical symptoms of patients. In this regard, it would be necessary to choose sensitive and selective analytical techniques for pharmacokinetic and pharmacodynamic studies, monitoring of drug concentration in biological fluids, and determination of the most appropriate dose to achieve the desired effect on the disease. In the present study, the analytical techniques based on spectroscopy and chromatography with different detectors for diagnosis and determination of candidate drugs in the treatment of COVID-19 in human biological fluids are reviewed during the period 2015-2022. Moreover, various sample preparation and extraction techniques, are being used for this purpose, such as protein precipitation (PP), solid-phase extraction (SPE), liquid-liquid extraction (LLE), and QuEChERS (quick, easy, cheap, effective, rugged, and safe) are investigated.
RESUMO
Adulteration of olive oil with the other cheap oils and fats plays an important role in economics and has nutritional benefits. In this work, metabolite profiling was performed using gas chromatography-mass spectrometry to identify and quantify animal fat (lard) adulteration in vegetable oil (olive oil). Principal component analysis could correctly identify and clustering olive oil, sunflower oil, sesame oil, lard, and adulterated samples through the changes in their fatty acid methyl esters (FAMEs) profile. A targeted metabolomics method was then optimized and validated through construction of calibration curves of known FAMSs in olive oil and lard. The method was presented high linearity (R2 > 0.96) and good intra and inter day accuracy and precision (79-101 and 86-102% and 2-7 and 3-7, respectively) for determination of FAMEs. Afterwards the absolute concentration and relative percentage of FAMEs were successfully determined in 12 commercial olive oils and 3 lards samples. Methyl myristate, methyl palmitate, methyl oleate, and methyl stearate were selected as discriminant markers to identify and quantify lard adulteration even at a low level of lard (5%w/w), with errors less than 2% in the comparison of the absolute or relative concentrations of FAMEs using several statistical methods. The proposed methodology allowed us to quantify the FAMEs simultaneously and also could predict small amount of lard in the adulterated olive oil samples.
RESUMO
Cyclotides are an interesting family of circular plant peptides. Their unique three-dimensional structure, comprising a head-to-tail circular backbone chain and three disulfide bonds, confers them stability against thermal, chemical, and enzymatic degradation. Their unique stability under extreme conditions creates an idea about the possibility of using harsh extraction methods such as microwave-assisted extraction (MAE) without affecting their structures. MAE has been introduced as a potent extraction method for extraction of natural compounds, but it is seldom used for peptide and protein extraction. In this work, microwave irradiation was applied to the extraction of cyclotides. The procedure was performed in various steps using a microwave instrument under different conditions. High-performance liquid chromatography (HPLC) and matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) results show stability of cyclotide structures on microwave radiation. The influential parameters, including time, temperature, and the ratio of solvents that are affecting the MAE potency, were optimized. Optimal conditions were obtained at 20 min of irradiation time, 1200 W of system power in 60 °C, and methanol/water at the ratio of 90:10 (v/v) as solvent. The comparison of MAE results with maceration extraction shows that there are similarities between cyclotide sequences and extraction yields.
Assuntos
Ciclotídeos/análise , Micro-Ondas , Extratos Vegetais/química , Viola/química , Sequência de Aminoácidos , Cromatografia Líquida de Alta Pressão , Ciclotídeos/isolamento & purificação , Dados de Sequência Molecular , Extratos Vegetais/isolamento & purificação , Alinhamento de Sequência , Extração em Fase Sólida , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por MatrizRESUMO
Four strains of a novel ascomycetous yeast species were isolated from flowers in Iran and China. Phylogenetic analysis of the sequences of the ITS region (including 5.8S rRNA gene) and the LSU rRNA gene D1/D2 domains indicated that these strains belong to the Starmerella clade and show divergence from previously described species in this clade. Growth reactions on carbon and nitrogen sources were similar to those observed in related species of the Starmerella clade. Sexual reproduction was not observed after mating tests on different sporulation media. Based on physiological characteristics and phylogeny of rRNA gene sequences, the novel species is most closely related to Candida (iter. nom. Starmerella) powellii and Candida (iter. nom. Starmerella) floricola. It is therefore assigned to the genus Starmerella and described as Starmerella orientalis f.a., sp. nov. The type strain is SAM09T ( = IBRC-M 30204T = CBS 14142T). The MycoBank accession number is MB 814379.
Assuntos
Ascomicetos/classificação , Flores/microbiologia , Filogenia , Ascomicetos/genética , Ascomicetos/isolamento & purificação , China , DNA Fúngico/genética , DNA Espaçador Ribossômico/genética , Irã (Geográfico) , Técnicas de Tipagem Micológica , Análise de Sequência de DNARESUMO
A new monolithic coating based on vinylpyrrolidone-ethylene glycol dimethacrylate polymer was introduced for stir bar sorptive extraction. The polymerization step was performed using different contents of monomer, cross-linker and porogenic solvent, and the best formulation was selected. The quality of the prepared vinylpyrrolidone-ethylene glycol dimethacrylate stir bars was satisfactory, demonstrating good repeatability within batch (relative standard deviation < 3.5%) and acceptable reproducibility between batches (relative standard deviation < 6.0%). The prepared stir bar was utilized in combination with ultrasound-assisted liquid desorption, followed by high-performance liquid chromatography with ultraviolet detection for the simultaneous determination of diazepam and nordazepam in human plasma samples. To optimize the extraction step, a three-level, four-factor, three-block Box-Behnken design was applied. Under the optimum conditions, the analytical performance of the proposed method displayed excellent linear dynamic ranges for diazepam (36-1200 ng/mL) and nordazepam (25-1200 ng/mL), with correlation coefficients of 0.9986 and 0.9968 and detection limits of 12 and 10 ng/mL, respectively. The intra- and interday recovery ranged from 93 to 106%, and the relative standard deviations were less than 6%. Finally, the proposed method was successfully applied to the analysis of diazepam and nordazepam at their therapeutic levels in human plasma. The novelty of this study is the improved polarity of the stir bar coating and its application for the simultaneous extraction of diazepam and its active metabolite, nordazepam in human plasma sample. The method was more rapid than previously reported stir bar sorptive extraction techniques based on monolithic coatings, and exhibited lower detection limits in comparison with similar methods for the determination of diazepam and nordazepam in biological fluids.
Assuntos
Cromatografia Líquida de Alta Pressão/instrumentação , Diazepam/sangue , Diazepam/isolamento & purificação , Metacrilatos/química , Nordazepam/sangue , Nordazepam/isolamento & purificação , Pirrolidinonas/química , Adsorção , Humanos , Polimerização , Propriedades de SuperfícieRESUMO
A simple, sensitive, and reliable procedure based on stir bar sorptive extraction coupled with high-performance liquid chromatography was applied to simultaneously extract and determine three semipolar nitrosamines including N-nitrosodibutylamine, N-nitrosodiphenylamine, and N-nitrosodicyclohexylamine. To achieve the optimum conditions, the effective parameters on the extraction efficiency including desorption solvent and time, ionic strength of sample, extraction time, and sample volume were systematically investigated. The optimized extraction procedure was carried out by stir bars coated with polydimethylsiloxane. Under optimum extraction conditions, the performance of the proposed method was studied. The linear dynamic range was obtained in the range of 0.95-1000 ng/mL (r = 0.9995), 0.26-1000 ng/mL (r = 0.9988) and both 0.32-100 ng/mL (r = 0.9999) and 100-1000 ng/mL (r = 0.9998) with limits of detection of 0.28, 0.08, and 0.09 ng/mL for N-nitrosodibutylamine, N-nitrosodiphenylamine, and N-nitrosodicyclohexylamine, respectively. The average recoveries were obtained >81%, and the reproducibility of the proposed method presented as intra- and interday precision were also found with a relative standard deviation <6%. Finally, the proposed method was successfully applied to the determination of trace amounts of selected nitrosamines in various water and wastewater samples and the obtained results were confirmed using mass spectrometry.
Assuntos
Nitrosaminas/análise , Poluentes Químicos da Água/química , Adsorção , Fracionamento Químico , Cromatografia Líquida de Alta Pressão , Estrutura MolecularRESUMO
Quantifying small amounts of the 17-hydroxyprogesterone in various matrix is crucial for different purposes. In this study, a commercial polydimethylsiloxane stir bar was used to extract hormone from water and urine samples. Analysis was performed by high-performance liquid chromatography using a UV detector. The response surface methodology was used to optimize the desorption and extraction steps, with predicted optimal point relative errors of 1.25% and 6.40%, respectively. The optimized method was validated with a linear range of 1.21-1000.00 for aqueous and 2.43-2000.00 ng mL-1 for urine samples. The coefficient of determination was 0.9998 and 0.9967, and the detection limit of the proposed method was obtained to be 0.40 and 0.80 ng mL-1 for aqueous and urine samples, respectively. The recovery percentage and relative standard deviation within a day and between three days after the addition of three different concentration levels of the standard to the control sample were 87-103% and 0.4-3.6% for aqueous and 87.5-101% and 0.1-5.2% for urine samples, respectively. The results show that the proposed method can be appropriate and cost-effective for extracting and analyzing this hormone. In addition, using three different tools, the greenness of the proposed method was proven.
Assuntos
17-alfa-Hidroxiprogesterona , Dimetilpolisiloxanos , Cromatografia Líquida de Alta Pressão/métodos , 17-alfa-Hidroxiprogesterona/urina , Humanos , Dimetilpolisiloxanos/química , Química Verde/métodos , Limite de Detecção , Extração em Fase Sólida/métodosRESUMO
The Poly acrylic acid/MIL-88(Fe)-NH2 composite material, carefully prepared, is employed as a sorbent for the stir bar. The best formula of the composite was selected by investigation of two parameters including the cross-linker of PAA and MIL-88(Fe)-NH2 content. The prepared stir bar was used for extraction of 2-pentanone, 2-heptanone, ethyl propionate, para-xylene, 1,2,4-trimethylbenzene, o-cresol, m-cresol in urine samples as breast cancer biomarkers with gas chromatography-flame ionization detector. The prepared Poly acrylic acid / MIL-88(Fe)-NH2 as sorbent for the stir bar demonstrate good repeatability of one bar (relative standard deviation (RSD%) < 4.61 %) and satisfactory reproducibility between two bars (RSD% < 6.85 %). The central composite design method was applied for the optimization of extraction parameters. Under the optimum conditions, linear dynamic ranges for compounds were in the acceptable range with correlation coefficients higher than 0.99. Detection limits of them were less than 1.71 µg L-1.
Assuntos
Acrilatos , Biomarcadores Tumorais , Neoplasias da Mama , Humanos , Feminino , Reprodutibilidade dos Testes , Hidrogéis , Limite de DetecçãoRESUMO
Analysis of cancer biomarkers in the body fluids is a new method for early detection of illness. However, due to the complex matrices of samples, the application of a pre-treatment method is unavoidable before the final analysis by gas chromatography (GC). Solid-phase microextraction (SPME) is a simple and, promising pre-concentration and separation method that its coatings are modified with different materials on the fibers. A new innovative self-healing polyacrylic acid PAA/MIL-88(Fe)-NH2 composite was synthesized as an SPME coating. The parameters including pH, crosslinker, and MIL-88(Fe)-NH2 content were optimized to formulate the composite. The prepared fiber was used to extract 2-pentanone, 2-heptanone, ethyl propionate, p-xylene, 1,2,4-trimethylbenzene, and o-cresol as a biomarker in breast cancer from urine samples. The prepared PAA/MIL-88(Fe)-NH2 SPME fibers demonstrate excellent repeatability (relative standard deviation (RSD%)< 3.4%) and satisfactory reproducibility (RSD%<6.9%). The central composite design method was applied for the optimization of extraction parameters. Under the optimum conditions, linear dynamic ranges for biomarkers were in the acceptable range with correlation coefficients higher than 0.98. The detection limits of them were less down 0.0016 µg L-1. Self-healing ability of fiber coating increased useful lifetime (about 120 times extraction with one fiber) as well as accuracy, reproducibility, and recovery of fibers.
Assuntos
Neoplasias da Mama , Microextração em Fase Sólida , Feminino , Humanos , Resinas Acrílicas , Biomarcadores Tumorais , Neoplasias da Mama/diagnóstico , Reprodutibilidade dos Testes , Microextração em Fase Sólida/métodosRESUMO
This research aims at determining some free amino acids in amino acid-based infant formulas and amino acid-modified medical foods for inborn errors of metabolism to prove their quality. A method based on high-performance liquid chromatography and diode array detection was developed and validated. Then, overall uncertainty was estimated by the bottom-up approach. Applying the weighted least squares regression method suggested good linearity with coefficient of determinations ≥ 0.9960. The limits of detection were calculated between 0.01 and 0.28 µg/mL. The most repetitive recovery values were obtained in the range of 91-108%, with RSDs ≤ 15%. The expanded uncertainties were below 20% for most amino acids. The contributions of linear regression and repeatability are two main factors in estimating overall uncertainty. The results offer this method as a simple and easy procedure for analyzing free amino acids in seven powdered medical foods designed for phenylketonuria, maple syrup urine disease, methylmalonic, and propionic acidemia.
Assuntos
Aminoácidos , Acidemia Propiônica , Aminoácidos/análise , Cromatografia Líquida de Alta Pressão/métodos , Humanos , Fórmulas Infantis/análise , IncertezaRESUMO
A sensitive and reproducible stir bar sorptive extraction and HPLC-UV detection method was used for the therapeutic drug monitoring of chlorpromazine and trifluoperazine in human serum. The separation was achieved using a C(18) column. The mobile phase consisted of methanol/sodium acetate buffer (pH 4.1; 0.1 M) (95:5, v/v) including 0.5% triethylamine. This miniaturized method can result in faster analysis, lower solvent consumption and less workload per sample while maintaining or even improving sensitivity. In the second part, stir bar sorptive extraction/HPLC-UV method was optimized by a chemometrics approach. An experimental design was therefore used to evaluate the statistically influential and/or interacting factors, among those described in the literature, and to find the best extraction and desorption conditions. Optimal sample volume of 1 mL, extraction time of 24 min at 31°C with pH 8.1 were obtained in a screening 2(5) half fractional factorial design followed by a Box-Behnken design. For the desorption conditions, a Box-Behnken design showed that the best conditions were 150 µL mobile phase for 20 min at 50°C. The optimized method was repeatable (CV<10%, linear (LOQ-500 ng/mL)), with the LOQs equal to 0.7 and 1.5 ng/mL for chlorpromazine and trifluoperazine, respectively.
Assuntos
Antipsicóticos/sangue , Clorpromazina/sangue , Cromatografia Líquida de Alta Pressão/instrumentação , Cromatografia Líquida de Alta Pressão/métodos , Monitoramento de Medicamentos/métodos , Trifluoperazina/sangue , Cromatografia Líquida de Alta Pressão/normas , Humanos , Estrutura Molecular , Reprodutibilidade dos Testes , Projetos de PesquisaRESUMO
Flow distributor located at the beginning of the micromachined pillar array column (PAC) has significant roles in uniform distribution of flow through separation channels and thus separation efficiency. Chip manufacturing artifacts, contaminated solvents, and complex matrix of samples may contribute to clogging of the microfabricated channels, affect the distribution of the sample, and alter the performance of both natural and engineered systems. An even fluid distribution must be achieved cross-sectionally through careful design of flow distributors and minimizing the sensitivity to clogging in order to reach satisfactory separation efficiency. Given the difficulty to investigate experimentally a high number of clogging conditions and geometries, this work exploits a computational fluid dynamic model to investigate the effect of various design parameters on the performance of flow distributors in equally spreading the flow along the separation channels in the presence of different degrees of clogging. An array of radially elongated hexagonal pillars was selected for the separation channel (column). The design parameters include channel width, distributor width, aspect ratio of the pillars, and number of contact zone rows. The performance of known flow distributors, including bifurcating (BF), radially interconnected (RI), and recently introduced mixed-mode (MMI) in addition to two new distributors designed in this work (MMII and MMIII) were investigated in terms of mean elution time, volumetric variance, asymmetry factors, and pressure drop between the inlet and the monitor line for each design. The results show that except for pressure drop, the channel width and aspect ratio of the pillars has no significant influence on flow distribution pattern in non-clogged distributors. However, the behavior of flow distributors in response to clogging was found to be dependent on width of the channels. Also increasing the distributor width and number of contact zone rows after the first splitting stage showed no improvement in the ability to alleviate the clogging. MMI distributor with the channel width of 3 µm, aspect ratio of the pillars equal to 20, number of exits of 8, and number of contact zones of 3 exhibited the highest stability and minimum sensitivity to different degrees of clogging.
RESUMO
A vinylpyrrolidone-ethylene glycol dimethacrylate-acrylic acid thin film was prepared on a polypropylene guard and its formulation was optimized for application in thin film microextraction followed by direct solid-state spectrofluorimetry method. The surface morphology, fluorescence property and extraction performance of the thin film were investigated systematically. The intra- and inter-batch reproducibilities of thin film fabrication were obtained 2.3 and 4.2%, respectively. The lifetime of each prepared thin film was 30 times with a relative standard deviation of less than 1.4%. The developed method was optimized for extraction of some sartans as angiotensin II receptors antagonist (including losartan, valsartan, and olmesartan) which have been used to control hypertension as the main causes of cardiovascular disease. The optimum extraction conditions achieved at 2- (for losartan) and 4- (for valsartan and olmesartan) sample pH, 500-rpm rotation rate and 30-min extraction time for all three analytes. At the optimum conditions, analyses of losartan, valsartan, and olmesartan were validated in the human plasma matrix. Broad linearity ranges with determination coefficients of more than 0.999 were achieved for each calibration curve. Limit of detection of the method was 0.5 ng mL-1 for all three analytes. The intra- and inter-day accuracies and precisions of the developed method were evaluated in spiked plasma samples at three concentration levels of each analyte with high recoveries of 95-101% and relative standard deviations less than 6%. This method provides a simple, sensitive, fast, and high-throughput analysis method with the possibility of effective extraction of at least 40 samples simultaneously without the necessity of protein precipitating, desorption, and solvent evaporation steps.
Assuntos
Bloqueadores do Receptor Tipo 1 de Angiotensina II/sangue , Pirrolidinonas/química , Microextração em Fase Sólida , Acrilatos/química , Humanos , Metacrilatos/química , Tamanho da Partícula , Espectrometria de Fluorescência , Propriedades de SuperfícieRESUMO
In the present study, a microwave-assisted extraction (MAE) method has been investigated for the extraction of glycyrrhizin from Menthazin herbal drug. The extracted samples have been analyzed by a developed reversed-phase liquid chromatography with ultraviolet detection. The separation was performed by a Eurospher-100 C8 reversed-phase column (250 × 4.6 mm i.d., 5 µm) and the mobile phase consisted of methanol:acetonitrile:water:glacial acetic acid (30:30:40:1 v/v/v/v) with a flow rate of 0.8 mL min-1. The extraction procedure has been screened by a two level full factorial design for determination of statistically significant parameters. Thereafter, the identified parameters, extraction temperature, time and solvent volume were optimized by a Box-Behnken design. The proposed mathematical model was based on analysis of variance results and correctly explained the behavior of the response in the experimental domain. R 2 value adjusted for numbers of degrees of freedom was 0.9915 and P-value for lack of fit, 0.8499 at the 95% confidence level, P > 0.05. The optimal condition identified were extraction temperature, 70 °C, time, 13.8 min and solvent volume 2.0 mL. To evaluate the applicability of the proposed MAE method, results were compared with those obtained with the liquid extraction method. Extraction efficiency and precision were higher when MAE has been used. The proposed method allows extracting the glycyrrhizin in a small quantity of solvent and faster than the liquid extraction method.
RESUMO
In this study, fabrication of a stir bar sorbent is presented by electropolymerization of pyrrole via cyclic voltametry for the first time. The fabricated stir bar was applied as an efficient sorbent for extraction and pre-concentration of trace amounts of estradiol in urine samples through stir bar sorptive extraction (SBSE) method followed by gas chromatography-flame ionization detector. For this purpose, first the surface of stainless steel rod was modified by hyroxide functional group. Then electropolymerization of pyrrole monomers took place on the surface of functionalized steel rod under the optimized conditions including pyrrole concentration of 0.03â¯mol L-1, equal concentration ratio of pyrrole to sodium dodecyl sulfate, 10 cycles of cyclic voltammetry and potential scan rate of 10â¯mV s-1. Characterization of the produced sorbent was confirmed by scanning electron microscope imaging and energy-dispersive X-ray and infrared spectroscopy. Evantually, under the optimized conditions, the stir bar sorbent was used for extraction of estradiol from human urine samples. The presented SBSE method showed a good linearity range of 50-700â¯ng mL-1 with coefficient of determination 0.9910, limit of detection 10â¯ng mL-1 and theoretical limit of quantification 33â¯ng mL-1. Moreover, better enrichment factor (87) and extraction recovery (43%) were obtained using the fabricated stir bar compared with two commercial stir bars for estradiol. The intra- and inter-bar relative recoveries were obtained 92.0% and their coefficient of variations were less than 5.4%.
Assuntos
Cromatografia Gasosa/métodos , Eletroquímica/métodos , Estradiol/isolamento & purificação , Polimerização , Pirróis/química , Eletrodos , Humanos , Concentração de Íons de Hidrogênio , Padrões de Referência , Reprodutibilidade dos Testes , Fatores de TempoRESUMO
A high-performance liquid chromatographic (HPLC) method was developed for the determination of N-nitrosodiethanolamine (NDELA), which is a non-volatile N-nitrosoamine. In this method, sodium 1-octanesulfonate has been used as an ion complexation agent for NDELA. The resulting complex was analyzed by reversed-phase high-performance liquid chromatography (RP-HPLC) using a Eurospher-100 C18 column (250 x 4.6 mm, 5 microm), water/acetonitrile (95/5, v/v) and UV detection at 234 nm. The detector response was linear in the range 0.03-10.00 microg mL(-1) and the limit of detection was 0.01 microg mL(-1). The complexation of the NDELA and sodium 1-octanesulfonate was confirmed by negative ion electrospray ionization mass spectrometry at m/z 327 [M-Na](-) and also MS/MS measurements of the resulting fragments. For real sample analyses, NDELA was measured in cosmetic products after clean up by solid-phase extraction (SPE) with C(18) cartridge for water-soluble samples and liquid-liquid extraction (LLE) by methylene chloride for less water-soluble samples. The average values for NDELA recovery by SPE and LLE were 86.9 and 51.8% and relative standard deviations (RSDs%) were 0.9 and 5.6%, respectively. The presented method is easy to use, robust and can be implemented on any reversed-phase HPLC system with UV detection.
Assuntos
Cosméticos/química , Dietilnitrosamina/análogos & derivados , Cromatografia Líquida , Dietilnitrosamina/análise , Preparações Farmacêuticas , Espectrometria de Massas por Ionização por ElectrosprayRESUMO
In our previous work, a new monolithic coating based on vinylpyrrolidone-ethylene glycol dimethacrylate polymer was introduced for stir bar sorptive extraction. The formulation of the prepared vinylpyrrolidone-ethylene glycol dimethacrylate monolithic polymer was optimized and the satisfactory quality of prepared coated stir bar was demonstrated. In this work, the prepared stir bar was utilized in combination with ultrasound-assisted liquid desorption, followed by high-performance liquid chromatography with ultraviolet detection for the simultaneous determination of losartan (LOS) and valsartan (VAS) in human plasma samples. In a comparison study, the extraction efficiency of the prepared stir bar was accompanied much higher extraction efficiency than the two commercial stir bars (polydimethylsiloxand and polyacrylate) for both target compounds. In order to improve the desorption efficiency of LOS and VAS, the best values for effective parameters on desorption step were selected systematically. Also, the effective parameters on extraction step were optimized using a Box-Behnken design. Under the optimum conditions, the analytical performance of the proposed method displayed excellent linear dynamic ranges for LOS (24-1000â¯ngâ¯mL-1) and VAS (91-1000â¯ngâ¯mL-1), with correlation coefficients of 0.9998 and 0.9971 and detection limits of 7 and 27â¯ngâ¯mL-1, respectively. The intra- and inter-day recovery ranged from 98 to 117%, and the relative standard deviations were less than 8%. Finally, the proposed technique was successfully applied to the analysis of LOS and VAS at their therapeutic levels in volunteer patient plasma sample. The obtained results were confirmed using liquid chromatography-mass spectrometry. The proposed technique was more rapid than previously reported stir bar sorptive extraction techniques based on monolithic coatings, and exhibited lower detection limits in comparison with similar methods for the determination of LOS and VLS in biological fluids. The obtained results were demonstrated that the lower selectivity of UV in comparison with MS detection was rectified by appropriate sample preparation through proposed extraction method to eliminate as many interfering compounds as possible.
Assuntos
Acrilatos/química , Losartan/sangue , Plasma/química , Polímeros/química , Valsartana/sangue , Cromatografia Líquida de Alta Pressão/métodos , Humanos , Limite de Detecção , Espectrometria de Massas/métodos , Metacrilatos/química , Pirrolidinonas/química , Reprodutibilidade dos Testes , Espectrofotometria UltravioletaRESUMO
19F nuclear magnetic resonance was used as a suitable analytical tool for the identification and selective determination of haloperidol in human serum and pharmaceutical preparations. The method is based on the integration of appropriate signals of haloperidol and trifluoroacetic acid as an internal standard. The proposed method is a rapid and facile, while without any sample pretreatment, manipulation of large samples and lengthy instrument time. The regression equation for haloperidol in human serum showed a good linearity in the range of 60-600 microg ml(-1) with a detection limit of 1.4 microg ml(-1). The mean recovery results on human serum samples ranged from about 96-103%, with relative standard deviations <8%. The method was also applied successfully to the determination of haloperidol in real pharmaceutical samples, and compared with the results obtained by a reference method. The drug's degradation was studied by the proposed method in hydrochloric acid media and main products were identified.
Assuntos
Antipsicóticos/análise , Antipsicóticos/sangue , Haloperidol/análise , Haloperidol/sangue , Calibragem , Humanos , Indicadores e Reagentes , Espectroscopia de Ressonância Magnética , Padrões de Referência , Reprodutibilidade dos Testes , Comprimidos/análiseRESUMO
A poly acrylate-ethylene glycol (PA-EG) thin film is introduced for the first time as a novel polar sorbent for sorptive extraction method coupled directly to solid-state spectrofluorimetry without the necessity of a desorption step. The structure, polarity, fluorescence property and extraction performance of the developed thin film were investigated systematically. Carvedilol was used as the model analyte to evaluate the proposed method. The entire procedure involved one-step extraction of carvedilol from plasma using PA-EG thin film sorptive phase without protein precipitation. Extraction variables were studied in order to establish the best experimental conditions. Optimum extraction conditions were the followings: stirring speed of 1000 rpm, pH of 6.8, extraction temperature of 60 °C, and extraction time of 60 min. Under optimal conditions, extraction of carvedilol was carried out in spiked human plasma; and the linear range of calibration curve was 15-300 ng mL(-1) with regression coefficient of 0.998. Limit of detection (LOD) for the method was 4.5 ng mL(-1). The intra- and inter-day accuracy and precision of the proposed method were evaluated in plasma sample spiked with three concentration levels of carvedilol; yielding a recovery of 91-112% and relative standard deviation of less than 8%, respectively. The established procedure was successfully applied for quantification of carvedilol in plasma sample of a volunteer patient. The developed PA-EG thin film sorptive phase followed by solid-state spectrofluorimetric method provides a simple, rapid and sensitive approach for the analysis of carvedilol in human plasma.