Effect of amylose content on physical and mechanical properties of potato-starch-based edible films.

The present study investigated the amylose content and the gelatinization properties of various potato starches extracted from different potato cultivars. These potato starches were used to prepare edible films. Physical and mechanical properties of the films were investigated. The crystallinity of selected native starches and edible films made of the same starches were determined by X-ray diffraction. The amylose content of potato starches varied between 11.9 and 20.1%. Gelatinization of potato starches in excess water occurred at temperatures ranging from 58 to 69 degrees C independently of the amylose content. The relative crystallinity was found to be around 10-13% in selected native potato starches with low, medium, and high amylose content. Instead, films prepared from the same potato starches were found to be practically amorphous having the relative crystallinity of 0-4%. The mechanical properties and the water vapor permeability of the films were found to be independent of the amylose content.

Synthesis and melt processing of cellulose esters for preparation of thermoforming materials and extended drug release tablets.

Using softwood pulp as the starting material, the synthesis of regioselectively substituted mixed cellulose esters with varying degree of substitution and ratio of short/long chains was successfully completed. The structures of the cellulose esters were characterised. The impact of the structural changes and the degree of substitution of the cellulose esters on thermal properties and processability were investigated. The study shows that the sequential esterification is a promising modification route for cellulose to improve its thermal processability and mechanical properties without the use of external processing aids such as plasticisers. In particular, the hexanoate group in the C6 position on the cellulose backbone acts as an internal plasticiser and improves thermal processability and increases the strength and stiffness of the cellulose ester. The properties of sequentially esterified cellulose promote its practical use in plastics, coatings, films and drug delivery. Sequentially esterified cellulose hexanoate-acetate was used successfully in a coating formulation for the preparation of tablets and showed a stable extended release profile for three water-insoluble drugs in this context. The pH of the release medium had no notable effect on the release properties.

Simultaneous bench scale production of dissolving grade pulp and valuable hemicelluloses from softwood kraft pulp by ionic liquid extraction.

Ionic liquid extraction of wood pulp has been highlighted as a highly potential new process for dissolving pulp production. Coproduction with a polymeric hemicellulose fraction was demonstrated in bench scale from softwood kraft pulp using extraction with the ionic liquid 1-ethyl-3-methylimidazolium acetate (EMIM OAc) and water. In total, the recovered pulp and hemicellulose fraction together yielded 95.5 wt.% of the pulp input. The extracted pulp had a remarkably high purity with an R18-value of 97.8%. The hemicellulose fraction consisted of galactoglucomannan, arabinoxylan and some cellulose and was precipitated from the ionic liquid-water mixture. After hydroxypropylation of the hemicellulose fraction, films were prepared and barrier and strength properties were compared to films from other polysaccharides. Reduced oxygen and water vapor permeation and good strength properties were demonstrated when compared to corresponding films from hydroxypropylated xylan from cold caustic extraction. The films have potential for applications in food packaging and edible films.

The effect of cellulose molar mass on the properties of palmitate esters.

Nowadays one of the growing trends is to replace oil-based products with cellulose-based materials. Currently most cellulose esters require a huge excess of chemicals and have therefore, not been broadly used in the industry. Here, we show that decreasing the molar mass of cellulose by ozone hydrolysis provides cellulose functionalization with less chemical consumption. To reveal the differences in reactivity and chemical consumption, we showed esterification of both native cellulose and ozone treated hydrolyzed cellulose. Based on the results, the molar mass of the starting cellulose has a significant effect on the end product's degree of substitution and properties. Furthermore, molar mass controlled palmitate esters form mechanically strong, flexible and optically transparent films with excellent water barrier properties. We anticipate that molar mass controlled cellulose will provide a starting point for the greater use of cellulose based materials, in various application, such as films and composites.

Effect of polysaccharide structure on mechanical and thermal properties of galactomannan-based films.

Films were prepared from guar gum and locust bean gum galactomannans. In addition, enzymatic modification was applied to guar gum to obtain structurally different galactomannans. Cohesive and flexible films were formed from galactomannans plasticized with 20-60% (w/w of polymer) glycerol or sorbitol. Galactomannans with lower galactose content (locust bean gum, modified guar gum) produced films with higher elongation at break and tensile strength. The mechanical properties of films were improved statistically significantly by decreasing the degree of polymerization of guar gum with mannanase treatments (4 h) of 2 and 10 nkat/g, whereas 50 nkat/g produced films with low elongation at break and tensile strength. Galactomannans with approximately 6 galactose units per 10 mannose backbone units resulted in films with 2 peaks in loss modulus spectra, whereas films from galactomannans with approximately 2 galactose groups per 10 mannose units behaved as a single phase in dynamic mechanical analysis.