Tadpole-Like Anisotropic Polymer/Lipid Janus Nanoparticles for Nose-to-Brain Drug Delivery: Importance of Geometry, Elasticity on Mucus-Penetration Ability.

Asymmetric geometry (aspect ratio >1), moderate stiffness (i.e., semielasticity), large surface area, and low mucoadhesion of nanoparticles are the main features to reach the brain by penetrating across the nasal mucosa. Herein, a new application has been presented for the use of multifunctional Janus nanoparticles (JNPs) with controllable geometry and size as a nose-to-brain (N2B) delivery system by changing proportions of Precirol ATO 5 and polycaprolactone compartments and other operating conditions. To bring to light the N2B application of JNPs, the results are presented in comparison with polymer and solid lipid nanoparticles, which are frequently used in the literature regarding their biopharmaceutical aspects: mucoadhesion and permeability through the nasal mucosa. The morphology and geometry of JPs were observed via cryogenic-temperature transmission electron microscopy images, and their particle sizes were verified by dynamic light scattering, atomic force microscopy, and scanning electron microscopy. Although all NPs showed penetration across the mucus barrier, the best increase in penetration was observed with asymmetric and semielastic JNPs, which have low interaction ability with the mucus layer. This study presents a new and promising field of application for a multifunctional system suitable for N2B delivery, potentially benefiting the treatment of brain tumors and other central nervous system diseases.

Selective labeling of phosphatidylserine for cryo-TEM by a two-step immunogold method.

Immunogold labeling in transmission electron microscopy (TEM) utilizes the high electron density of gold nanoparticles conjugated to proteins to identify specific antigens in biological samples. In this work we applied the concept of immunogold labeling for the labeling of negatively charged phospholipids, namely phosphatidylserine, by a simple protocol, performed entirely in the liquid-phase, from which cryo-TEM specimens can be directly prepared. Labeling included a two-step process using biotinylated annexin-V and gold-conjugated streptavidin. We initially applied it on liposomal systems, demonstrating its specificity and selectivity, differentiating between 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-dioleoyl-sn-glycero-3-phospho-l-serine (DOPS) membranes. We also observed specific labeling on extracellular vesicle samples isolated from THP1 cells and from MDA-468 cells, which underwent stimulations. Finally, we compared the levels of annexin-V labeling on the cells vs. on their isolated EVs by flow cytometry and found a good correlation with the cryo-TEM results. This simple, yet effective labeling technique makes it possible to differentiate between negatively charged and non-negatively charged membranes, thus shillucidating their possible EV shedding mechanism.

Self-Aggregation in Aqueous Media of Amphiphilic Diblock and Random Block Copolymers Composed of Monomers with Long Side Chains.

Amphiphilic diblock copolymers and hydrophobically modified random block copolymers can self-assemble into different structures in a selective solvent. The formed structures depend on the copolymer properties, such as the ratio between the hydrophilic and the hydrophobic segments and their nature. In this work, we characterize by cryogenic transmission electron microscopy (cryo-TEM) and dynamic light scattering (DLS) the amphiphilic copolymers poly(2-dimethylamino ethyl methacrylate)-b-poly(lauryl methacrylate) (PDMAEMA-b-PLMA) and their quaternized derivatives QPDMAEMA-b-PLMA at different ratios between the hydrophilic and the hydrophobic segments. We present the various structures formed by these copolymers, including spherical and cylindrical micelles, as well as unilamellar and multilamellar vesicles. We also examined by these methods the random diblock copolymers poly(2-(dimethylamino) ethyl methacrylate)-b-poly(oligo(ethylene glycol) methyl ether methacrylate) (P(DMAEMA-co-Q6/12DMAEMA)-b-POEGMA), which are partially hydrophobically modified by iodohexane (Q6) or iodododecane (Q12). The polymers with a small POEGMA block did not form any specific nanostructure, while a polymer with a larger POEGMA block formed spherical and cylindrical micelles. This nanostructural characterization could lead to the efficient design and use of these polymers as carriers of hydrophobic or hydrophilic compounds for biomedical applications.

Complexes of Charged-Neutral Block Copolymers and Surfactants: Process-Dependent Features and Long-Term Stability of Their Aqueous Dispersions.

Aqueous dispersions of charged-neutral block copolymers (poly(acrylamide)-b-poly(acrylate)) complexed with an oppositely charged surfactant (dodecyltrimethylammonium) have been prepared by different approaches: the simple mixing of two solutions (MS approach) containing the block copolymer and surfactant, with their respective simple counterions, and dispersion of a freeze-dried complex salt prepared in the absence of simple counterions (CS approach). The CS particles were investigated under different conditions: dispersion of a CS in salt-free water and dispersion of a CS in a dilute salt solution, the latter condition yielding dispersions with the same composition as the MS process. Additionally, aged dispersions (up to 6 months) and dispersed complexes of the polyacrylate homopolymer and dodecyltrimethylammonium surfactant were evaluated. By employing different characterization techniques, it was seen that dispersions prepared by the MS approach display nanometric spherical particles with disordered cores, and poor colloidal stability, partially caused by the absence of surface charge (ζ-potential close to zero). Oppositely, anisometric particles were formed in CS dispersions and were large enough to sustain micellar cubic cores. The CS particles presented long-time colloidal stability, partially due to a net negative surface charge, but the stability varied with the length of the neutral block composing the corona. Our results demonstrate that all dispersed particles are metastable structures, with physicochemical properties strongly dependent on the preparation procedure, thus making these particles suitable for fundamental studies and potential applications where accurate control of their properties, including size, shape, internal structure, and stability, is desired.

The effect of specimen preparation on the nanostructure of SLES aqueous solutions observed by cryo-TEM.

Sodium lauryl ether sulphate (SLES) is a detergent widely used in cosmetics and personal-care industries; hence, it is of particular interest to study the self-assembled nanostructure it forms at different conditions. Cryogenic transmission electron microscopy (cryo-TEM) is the most suitable technique for the direct-imaging of such systems. However, since SLES is sensitive to flow and shear, specimen preparation artefacts may misrepresent the native state of the solution. In this paper, we present different cryo-TEM specimen preparation methods, and show how they affect the nanostructure of the system. In fact, for this system, we were able to record the native state of the solution only after sufficient time of on-the-grid relaxation (OGR) after blotting. Here, we also intend to point out the importance of considering the nature of the solution when preparing cryo-TEM specimens.

The nanostructure of polyelectrolyte complexes of QPDMAEMA-b-POEGMA copolymers and oppositely charged polyelectrolytes, and their stability in the presence of serum albumin.

Quaternized poly(2-(dimethylamino) ethyl methacrylate)-b-poly(oligo(ethyleneglycol) methyl ether methacrylate) (QPDMAEMA-b-POEGMA) is a copolymer of a positively charged block and a non-ionic hydrophilic block. The positively charged block, QPDMAEMA, electrostatically interacts with oppositely charged polymers, e.g., poly(acrylic acid) (PAA) and DNA, to form a complex. This complex is stable in aqueous solution due to the hydrophilic block, POEGMA, which provides colloidal stability and biocompatibility. Polyplexes can be used as non-viral vectors in gene therapy. Polyplexes are essential for delivering genetic materials into cells because they protect the genetic material from degradation before reaching the target cells, thus increasing the transfection efficiency. However, currently used polyplexes show a low transfection efficiency in vivo, probably because the polyplexes are exposed to blood proteins, such as serum albumin, which cause their dissociation. The main goal of this research is the morphology characterization of QPDMAEMA-b-POEGMA complexes with the sodium salt of polyacrylic acid (NaPAA), and with DNA by cryogenic transmission electron microscopy (cryo-TEM) and small-angle X-ray scattering (SAXS). These methods give qualitative and quantitative data about the morphology of the complexes. The morphology of the complexes was examined at different charge ratios (CRs). Complexes with NaPAA form core-corona spherical micelles and vesicular structures, whereas complexes with DNA form lamellar and hexagonal structures. The QPDMAEMA-b-POEGMA and DNA complexes were also examined after exposing them to bovine serum albumin (BSA). We found that BSA does not affect the complexes for seven days. This morphology characterization is essential for better design and formulation of vectors for gene therapy and polyelectrolyte complexes for biomedical applications.

Using Microemulsions: Formulation Based on Knowledge of Their Mesostructure.

Microemulsions, as thermodynamically stable mixtures of oil, water, and surfactant, are known and have been studied for more than 70 years. However, even today there are still quite a number of unclear aspects, and more recent research work has modified and extended our picture. This review gives a short overview of how the understanding of microemulsions has developed, the current view on their properties and structural features, and in particular, how they are related to applications. We also discuss more recent developments regarding nonclassical microemulsions such as surfactant-free (ultraflexible) microemulsions or ones containing uncommon solvents or amphiphiles (like antagonistic salts). These new findings challenge to some extent our previous understanding of microemulsions, which therefore has to be extended to look at the different types of microemulsions in a unified way. In particular, the flexibility of the amphiphilic film is the key property to classify different microemulsion types and their properties in this review. Such a classification of microemulsions requires a thorough determination of their structural properties, and therefore, the experimental methods to determine microemulsion structure and dynamics are reviewed briefly, with a particular emphasis on recent developments in the field of direct imaging by means of electron microscopy. Based on this classification of microemulsions, we then discuss their applications, where the application demands have to be met by the properties of the microemulsion, which in turn are controlled by the flexibility of their amphiphilic interface. Another frequently important aspect for applications is the control of the rheological properties. Normally, microemulsions are low viscous and therefore enhancing viscosity has to be achieved by either having high concentrations (often not wished for) or additives, which do not significantly interfere with the microemulsion. Accordingly, this review gives a comprehensive account of the properties of microemulsions, including most recent developments and bringing them together from a united viewpoint, with an emphasis on how this affects the way of formulating microemulsions for a given application with desired properties.

Glycan Node Analysis Detects Varying Glycosaminoglycan Levels in Melanoma-Derived Extracellular Vesicles.

Extracellular vesicles (EVs) play important roles in (patho)physiological processes by mediating cell communication. Although EVs contain glycans and glycosaminoglycans (GAGs), these biomolecules have been overlooked due to technical challenges in comprehensive glycome analysis coupled with EV isolation. Conventional mass spectrometry (MS)-based methods are restricted to the assessment of N-linked glycans. Therefore, methods to comprehensively analyze all glyco-polymer classes on EVs are urgently needed. In this study, tangential flow filtration-based EV isolation was coupled with glycan node analysis (GNA) as an innovative and robust approach to characterize most major glyco-polymer features of EVs. GNA is a molecularly bottom-up gas chromatography-MS technique that provides unique information that is unobtainable with conventional methods. The results indicate that GNA can identify EV-associated glyco-polymers that would remain undetected with conventional MS methods. Specifically, predictions based on GNA identified a GAG (hyaluronan) with varying abundance on EVs from two different melanoma cell lines. Enzyme-linked immunosorbent assays and enzymatic stripping protocols confirmed the differential abundance of EV-associated hyaluronan. These results lay the framework to explore GNA as a tool to assess major glycan classes on EVs, unveiling the EV glycocode and its biological functions.

Extending Cryo-EM to Nonaqueous Liquid Systems.

Cryogenic-temperature transmission electron microscopy (cryo-TEM) of aqueous systems has become a widely used methodology, especially in the study of biological systems and synthetic aqueous systems, such as amphiphile and polymer solutions. Cryogenic-temperature scanning electron microscopy (cryo-SEM), while not as widely used as cryo-TEM, is also found in many laboratories of basic and applied research. The application of these methodologies, referred to collectively as cryogenic-temperature electron microscopy (cryo-EM) for direct nanostructural studies of nonaqueous liquid systems is much more limited, although such systems are important in basic research and are found in a very large spectrum of commercial applications. The study of nonaqueous liquid systems by cryo-EM poses many technical challenges. Specimen preparation under controlled conditions of air saturation around the specimen cannot be performed by the currently available commercial system, and the most effective cryogen, freezing ethane, cannot be used for most such liquid systems. Imaging is often complicated by low micrograph contrast and high sensitivity of the specimens to the electron beam.At the beginning of this Account, we describe the basic principles of cryo-EM, emphasizing factors that are essential for successful direct imaging by cryo-TEM and cryo-SEM. We discuss the peculiarities of nonaqueous liquid nanostructured systems when studied with these methodologies and how the technical difficulties in imaging nonaqueous systems, from oil-based to strong acid-based liquids, have been overcome, and the applicability of cryo-TEM and cryo-SEM has been expanded in recent years. Modern cryo-EM has been advanced by a number of instrumental developments, which we describe. In the TEM, these include improved electron field emission guns (FEGs) and microscope optics, the Volta phase plate to enhance image contrast by converting phase differences to amplitude differences without the loss of resolution by an objective lens strong underfocus, and highly sensitive image cameras that allow the recording of TEM images with minimal electron exposure. In the SEM, we take advantage of improved FEGs that allow imaging at a low (around 1 kV) electron acceleration voltage that is essential for high-resolution imaging and for avoiding specimen charging of uncoated nonconductive specimens, better optics, and a variety of sensitive detectors that have considerably improved resolution and, under the proper conditions, give excellent contrast even between elements quite close on the periodic table of the elements, such as the most important oxygen and carbon atoms.Finally we present and analyze several examples from our recent studies, which illustrate the issues presented above, including the remarkable progress made in recent years in this field and the strength and applicability of cryo-EM methodologies.

Extracellular vesicle glucose transporter-1 and glycan features in monocyte-endothelial inflammatory interactions.

Monocyte-induced endothelial cell inflammation is associated with multiple pathological conditions, and extracellular vesicles (EVs) are essential nanosized components of intercellular communication. EVs derived from endotoxin-stimulated monocytes were previously shown to carry pro-inflammatory proteins and RNAs. The role of glucose transporter-1 (GLUT-1) and glycan features in monocyte-derived EV-induced endothelial cell inflammation remains largely unexplored. This study demonstrates that EVs derived from endotoxin-stimulated monocytes activate inflammatory pathways in endothelial cells, which are partially attributed to GLUT-1. Alterations in glycan features and increased levels of GLUT-1 were observed in EVs derived from endotoxin-stimulated monocytes. Notably, inhibition of EV-associated GLUT-1, through the use of fasentin, suppressed EV-induced inflammatory cytokines in recipient endothelial cells.

Enhanced ordering in length-polydisperse carbon nanotube solutions at high concentrations as revealed by small angle X-ray scattering.

Carbon nanotubes (CNTs) are stiff, all-carbon macromolecules with diameters as small as one nanometer and few microns long. Solutions of CNTs in chlorosulfonic acid (CSA) follow the phase behavior of rigid rod polymers interacting via a repulsive potential and display a liquid crystalline phase at sufficiently high concentration. Here, we show that small-angle X-ray scattering and polarized light microscopy data can be combined to characterize quantitatively the morphology of liquid crystalline phases formed in CNT solutions at concentrations from 3 to 6.5% by volume. We find that upon increasing their concentration, CNTs self-assemble into a liquid crystalline phase with a pleated texture and with a large inter-particle spacing that could be indicative of a transition to higher-order liquid crystalline phases. We explain how thermal undulations of CNTs can enhance their electrostatic repulsion and increase their effective diameter by an order of magnitude. By calculating the critical concentration, where the mean amplitude of undulation of an unconstrained rod becomes comparable to the rod spacing, we find that thermal undulations start to affect steric forces at concentrations as low as the isotropic cloud point in CNT solutions.

Pathological transitions in myelin membranes driven by environmental and multiple sclerosis conditions.

Multiple sclerosis (MS) is an autoimmune disease, leading to the destruction of the myelin sheaths, the protective layers surrounding the axons. The etiology of the disease is unknown, although there are several postulated environmental factors that may contribute to it. Recently, myelin damage was correlated to structural phase transition from a healthy stack of lamellas to a diseased inverted hexagonal phase as a result of the altered lipid stoichiometry and low myelin basic protein (MBP) content. In this work, we show that environmental conditions, such as buffer salinity and temperature, induce the same pathological phase transition as in the case of the lipid composition in the absence of MBP. These phase transitions have different transition points, which depend on the lipid's compositions, and are ion specific. In extreme environmental conditions, we find an additional dense lamellar phase and that the native lipid composition results in similar pathology as the diseased composition. These findings demonstrate that several local environmental changes can trigger pathological structural changes. We postulate that these structural modifications result in myelin membrane vulnerability to the immune system attacks and thus can help explain MS etiology.

Adipose-Derived Biogenic Nanoparticles for Suppression of Inflammation.

Extracellular vesicles secreted from adipose-derived mesenchymal stem cells (ADSCs) have therapeutic effects in inflammatory diseases. However, production of extracellular vesicles (EVs) from ADSCs is costly, inefficient, and time consuming. The anti-inflammatory properties of adipose tissue-derived EVs and other biogenic nanoparticles have not been explored. In this study, biogenic nanoparticles are obtained directly from lipoaspirate, an easily accessible and abundant source of biological material. Compared to ADSC-EVs, lipoaspirate nanoparticles (Lipo-NPs) take less time to process (hours compared to months) and cost less to produce (clinical-grade cell culture facilities are not required). The physicochemical characteristics and anti-inflammatory properties of Lipo-NPs are evaluated and compared to those of patient-matched ADSC-EVs. Moreover, guanabenz loading in Lipo-NPs is evaluated for enhanced anti-inflammatory effects. Apolipoprotein E and glycerolipids are enriched in Lipo-NPs compared to ADSC-EVs. Additionally, the uptake of Lipo-NPs in hepatocytes and macrophages is higher. Lipo-NPs and ADSC-EVs have comparable protective and anti-inflammatory effects. Specifically, Lipo-NPs reduce toll-like receptor 4-induced secretion of inflammatory cytokines in macrophages. Guanabenz-loaded Lipo-NPs further suppress inflammatory pathways, suggesting that this combination therapy can have promising applications for inflammatory diseases.

Effect of Carbon Nanotube Diameter and Stiffness on Their Phase Behavior in Crowded Solutions.

The unique carbon nanotube (CNT) properties are mainly determined by their geometry, e.g., their aspect ratio, diameter, and number of walls. So far, chlorosulfonic acid is the only practical true solvent for carbon nanotubes, forming thermodynamically stable molecular solutions. Above a critical concentration the system forms an ordered, nematic liquid-crystalline phase. That phase behavior is the basis for liquid-phase processing and the optimal translation of the carbon nanotube molecular properties to the macroscopic scale. The final material properties depend on the phase behavior of the "dope" from which it is prepared, which depends on the CNT parameters themselves. Earlier work determined that CNT aspect ratio controls the phase behavior, in accordance with classical rigid-rod theories. Here we use cryogenic transmission electron microscopy and Raman spectroscopy to understand the relation between the geometry of the CNTs, the chemical interaction with chlorosulfonic acid, and the phase behavior of crowded solutions. We show that the CNT diameter and number of walls also play an independent role in the phase transition and phase morphology of the system because of their effect on the CNT bending stiffness.

Uncommon Structures of Oppositely Charged Hyaluronan/Surfactant Assemblies under Physiological Conditions.

Self-assembled aggregates formed by semidilute polyanion hyaluronan (hyaluronic acid, HA) and an oppositely charged surfactant tetradecyltrimethylammonium bromide (TTAB) in an aqueous phosphate-buffered saline (PBS) solution have been studied via light scattering (LS), small-angle neutron scattering (SANS), and cryogenic transmission electron microscopy (cryo-TEM). The addition of 0-20 mM TTAB to a 27.7 mM (monomer, 1 wt %) HA solution (597 kDa) in PBS buffer leads to soluble complexes until phase separation occurs near charge equilibrium (>20 mM TTAB). While the viscosity remains rather constant, already small amounts of added TTAB lead to the formation of large globular superstructures, which are built in a hierarchical fashion from a locally threadlike structural arrangement of TTA micelles along the stiff HA chains, within the little changed HA network. These globular domains have radii of 60-100 nm and contain 500-700 TTA micelles, which means that they are very "fluffy" and composed of about 99% water. They do not grow in size or number upon further TTAB addition, but, instead, the additional TTA micelles form further threadlike complexes outside of the big globular domains. Such a type of polyelectrolyte-surfactant complexes (PESCs) has not been described before and has to be attributed to the particular properties of HA, which are high stiffness and relatively weak interactions with oppositely charged micelles due to having the charged carboxylic group close to the polysaccharide backbone. These findings demonstrate that the HA network structure in solution basically remains unaffected by complexation with an oppositely charged surfactant, explaining the unchanged rheological behavior and the formation of a unique PESC local "coacervate" structure within the HA hydrogel network.

Multifunctional cubic liquid crystalline nanoparticles for chemo- and photodynamic synergistic cancer therapy.

With the aim of engineering multifunctional nanoparticles useful for cancer therapy, a diketopyrrolopyrrole-porphyrin based photosensitizer was here conjugated to a block copolymer (Pluronic F108), and used to stabilize in water lipidic cubic liquid crystalline nanoparticles (cubosomes), also loaded with the antineoplastic agent docetaxel. The physicochemical characterization by SAXS, DLS, and cryo-TEM demonstrated that the formulation consisted of cubosomes, about 150 nm in size, possessing a bicontinuous cubic structure (space group Pn3m). The cellular imaging experiments proved that these nanoparticles localized in lysosomes and mitochondria, while cytotoxicity tests evidenced a slight but significant synergistic effect which, after irradiation, increased the toxicity induced by docetaxel alone, allowing further reduction of cell viability.

Brain metastases-derived extracellular vesicles induce binding and aggregation of low-density lipoprotein.

BACKGROUND: Cancer cell-derived extracellular vesicles (EVs) have previously been shown to contribute to pre-metastatic niche formation. Specifically, aggressive tumors secrete pro-metastatic EVs that travel in the circulation to distant organs to modulate the microenvironment for future metastatic spread. Previous studies have focused on the interface between pro-metastatic EVs and epithelial/endothelial cells in the pre-metastatic niche. However, EV interactions with circulating components such as low-density lipoprotein (LDL) have been overlooked. RESULTS: This study demonstrates that EVs derived from brain metastases cells (Br-EVs) and corresponding regular cancer cells (Reg-EVs) display different interactions with LDL. Specifically, Br-EVs trigger LDL aggregation, and the presence of LDL accelerates Br-EV uptake by monocytes, which are key components in the brain metastatic niche. CONCLUSIONS: Collectively, these data are the first to demonstrate that pro-metastatic EVs display distinct interactions with LDL, which impacts monocyte internalization of EVs.

Extraction of Boron Nitride Nanotubes and Fabrication of Macroscopic Articles Using Chlorosulfonic Acid.

Due to recent advances in high-throughput synthesis, research on boron nitride nanotubes (BNNTs) is moving toward applications. One future goal is the assembly of macroscopic articles of high-aspect-ratio, pristine BNNTs. However, these articles are presently unattainable because of insufficient purification and fabrication methods. We introduce a solution process for extracting BNNTs from synthesis impurities without sonication or the use of surfactants and proceed to convert the extracted BNNTs into thin films. The solution process can also be used to convert as-synthesized material-which contains significant amounts of hexagonal boron nitride ( h-BN)-into mats and aerogels with controllable structure and dimension. The solution extraction method, combined with further advances in synthesis and purification, contributes to the development of all-BNNT macroscopic articles, such as fibers and 3-D structures.

A direct-imaging cryo-EM study of shedding extracellular vesicles from leukemic monocytes.

The human leukemia monocytic cell line (THP-1) is known to shed extracellular vesicles (EVs) under various stimulations. We studied the effects of two types of common stimulation types, lipopolysaccharide (LPS) and starvation conditions by high resolution cryogenic electron microscopy, namely, cryo-SEM and cryo-TEM. Cryo-SEM data of cells undergoing EV blebbing and shedding is presented here for the first time. The high-resolution images show good agreement with models describing the membrane processes of shedding. Cells that underwent a 48-h starvation treatment exhibited differing morphological features, including shrunken nucleus and elongated membrane protrusions. LPS treated cells, however, showed extensive blebbing originating from the cell membrane, in good agreement with the sizes of EVs imaged by cryo-TEM. EVs isolated from both types of stimulations were measured by nanoparticle tracking analysis (NanoSight), by which LPS-EVs samples exhibited higher concentration and smaller mean diameter, as compared to starvation-EVs. Our results suggest a difference in the effects of the two stimulation types on the shedding process and possibly on the type of EVs shed. Our unique methodologies provide an important and innovative outlook of the shedding process and on its products, paving the way to further discoveries in this developing field of research, in which much is still unknown.

Direct Imaging of Carbon Nanotube Liquid-Crystalline Phase Development in True Solutions.

Using direct-imaging cryogenic transmission and scanning electron microscopy, we show different stages of liquid-crystalline phase development in progressively more concentrated solutions of carbon nanotubes in chlorosulfonic acid: a dilute phase of individually dissolved carbon nanotubes; semidilute and concentrated isotropic phases; coexisting concentrated isotropic and nematic phases in local equilibrium with each other; and a fully liquid-crystalline phase. Nanometric resolution of cryogenic electron microscopy reveals carbon nanotube self-assembly into liquid-crystalline domains of several nanometers in width at very early stages. We find significant differences in carbon nanotube liquid-crystalline domain morphology as a function of the carbon nanotube aspect ratio, diameter, and degree of purity.