Twisted molecular wires polarize spin currents at room temperature.

A critical spintronics challenge is to develop molecular wires that render efficiently spin-polarized currents. Interplanar torsional twisting, driven by chiral binucleating ligands in highly conjugated molecular wires, gives rise to large near-infrared rotational strengths. The large scalar product of the electric and magnetic dipole transition moments ([Formula: see text]), which are evident in the low-energy absorptive manifolds of these wires, makes possible enhanced chirality-induced spin selectivity-derived spin polarization. Magnetic-conductive atomic force microscopy experiments and spin-Hall devices demonstrate that these designs point the way to achieve high spin selectivity and large-magnitude spin currents in chiral materials.

Chirality enhances oxygen reduction.

Controlled reduction of oxygen is important for developing clean energy technologies, such as fuel cells, and is vital to the existence of aerobic organisms. The process starts with oxygen in a triplet ground state and ends with products that are all in singlet states. Hence, spin constraints in the oxygen reduction must be considered. Here, we show that the electron transfer efficiency from chiral electrodes to oxygen (oxygen reduction reaction) is enhanced over that from achiral electrodes. We demonstrate lower overpotentials and higher current densities for chiral catalysts versus achiral ones. This finding holds even for electrodes composed of heavy metals with large spin-orbit coupling. The effect results from the spin selectivity conferred on the electron current by the chiral assemblies, the chiral-induced spin selectivity effect.

Could Olympic Gels of Polystyrene be Produced by ARGET ATRP From Bifunctional Initiators?

The kinetics of gelation in the Activators Regenerated by Electron Transfer Atom Transfer Radical Polymerization (ARGET ATRP) of styrene, using a bifunctional initiator and no crosslinking agents are investigated. By applying the method of moments, we develop a system of differential equations that accounts for the formation of polymer rings. The kinetic rate constants of this model are optimized on the experimentally determined kinetics, varying the reaction temperature and ethanol fraction. Subsequently, we explore how variations in the amounts of catalyst, initiator, and reducing agents affect the simulated equilibria of ARGET ATRP, the emergence of gelation, and the swelling properties of the resulting networks. These findings suggest that favoring ring formation enhances the gelation phenomenon, supporting the hypothesis that the networks formed under the reported reaction conditions are olympic gels.

Challenges in the Direct Detection of Chirality-induced Spin Selectivity: Investigation of Foldamer-based Donor-acceptor Dyads.

Over the past two decades, the chirality-induced spin selectivity (CISS) effect was reported in several experiments disclosing a unique connection between chirality and electron spin. Recent theoretical works highlighted time-resolved Electron Paramagnetic Resonance (trEPR) as a powerful tool to directly detect the spin polarization resulting from CISS. Here, we report a first attempt to detect CISS at the molecular level by linking the pyrene electron donor to the fullerene acceptor with chiral peptide bridges of different length and electric dipole moment. The dyads are investigated by an array of techniques, including cyclic voltammetry, steady-state and transient optical spectroscopies, and trEPR. Despite the promising energy alignment of the electronic levels, our multi-technique analysis reveals no evidence of electron transfer (ET), highlighting the challenges of spectroscopic detection of CISS. However, the analysis allows the formulation of guidelines for the design of chiral organic model systems suitable to directly probe CISS-polarized ET.

Spin-dependent electrochemistry and electrochemical enantioselective recognition with chiral methylated bis(ethylenedithio)-tetrathiafulvalenes.

Enantio-discrimination and spin-dependent electrochemistry (SDE), as a manifestation of the chirality-induced spin selectivity (CISS) effect, are important phenomena that can be probed by "chiral" electrochemistry. Here, we prepared chiralized surfaces of gold and nickel, to serve as working electrodes, through effective chemisorption of enantiopure dimethyl-bis(ethylenedithio)-tetrathiafulvalene (DM-BEDT-TTF) 1, tetramethyl-bis(ethylenedithio)-tetrathiafulvalene (TM-BEDT-TTF) 2, and their capped silver nanoparticle (AgNPs) aggregate by simple incubation of the metallic substrates. The effective chemisorption was checked by means of ultrahigh vacuum x-ray photoelectron spectroscopy (XPS) and by electro-desorption experiments, i.e., cyclic voltammetry (CV) scans showing a first electro-desorption peak at about -1.0 V. The Au|1 and Au|2 chiral electrodes were successfully used in CV experiments exploiting chiral redox probes. Finally, the hybrid interfaces Ni|enantiopure 1 or 2|AgNPs served as working electrodes in SDE experiments. In particular, the hybrid chiral interfaces Ni|(R)-2|AgNPs and Ni|(S)-2|AgNPs exhibited a significant spin-filtering ability, as a manifestation of the CISS effect, with average spin polarization values of 15%.

Helicity Control in the Aggregation of Achiral Squaraine Dyes in Solution and Thin Films.

Squaraine dyes are well known for their strong absorption in the visible regime. Reports on chiral squaraine dyes are, however, scarce. To address this gap, we here report two novel chiral squaraine dyes and their achiral counterparts. The presented dyes are aggregated in solution and in thin films. A detailed chiroptical study shows that thin films formed by co-assembling the chiral dye with its achiral counterpart exhibit exceptional photophysical properties. The circular dichroism (CD) of the co-assembled structures reaches a maximum when just 25 % of the chiral dye are present in the mixture. The solid structures with the highest relative CD effect are achieved when the chiral dye is used solely as a director, rather than the structural component. The chiroptical data are further supported by selected spin-filtering measurements using mc-AFM. These findings provide a promising platform for investigating the relationship between the dissymmetry of a supramolecular structure and emerging material properties rather than a comparison between a chiral molecular structure and an achiral counterpart.

Spin-selective electron transmission through self-assembled monolayers of double-stranded peptide nucleic acid.

Monolayers of chiral molecules can preferentially transmit electrons with a specific spin orientation, introducing chiral molecules as efficient spin filters. This phenomenon is established as chirality-induced spin selectivity (CISS) and was demonstrated directly for the first time in self-assembled monolayers (SAMs) of double-stranded DNA (dsDNA)1 . Here, we discuss SAMs of double-stranded peptide nucleic acid (dsPNA) as a system which allows for systematic investigations of the influence of various molecular properties on CISS. In photoemission studies, SAMs of chiral, γ-modified PNA show significant spin filtering of up to P = (24.4 ± 4.3)% spin polarization. The polarization values found in PNA lacking chiral monomers are considerably lower at about P = 12%. The results confirm that the preferred spin orientation is directly linked to the molecular handedness and indicate that the spin filtering capacity of the dsPNA helices might be enhanced by introduction of chiral centers in the constituting peptide monomers.

Spin-dependent charge transfer at chiral electrodes probed by magnetic resonance.

Chirality-induced spin selectivity is evidenced by exciting the spin resonance of radicals in an electrochemical cell where the working electrode is covered with a chiral self-assembled monolayer. Because the electron transfer to and from the paramagnetic radical is spin dependent, the electrochemical current changes at resonance. This electrically-detected magnetic resonance (EDMR) is monitored by a lock-in detection based on electrode voltage modulation, at a frequency that optimizes the sensitivity of the differential conductance to the electrode charge transfer process. The method is validated using p-doped GaAs electrodes in which the conduction band electrons are hyperpolarized by a well-known method of optical spin pumping with circularly polarized light. Gold electrodes covered with peptides consisting of 5 alanine groups (Al5) present a relative current change of up to 5 × 10-5 when the resonance condition is met, corresponding to a spin filtering efficiency between 6 and 19%.

Asymmetric reactions induced by electron spin polarization.

Essential aspects of the chiral induced spin selectivity (CISS) effect and their implications for spin-controlled chemistry and asymmetric electrochemical reactions are described. The generation of oxygen through electrolysis is discussed as an example in which chirality-based spin-filtering and spin selection rules can be used to improve the reaction's efficiency and selectivity. Next the discussion shifts to illustrate how the spin selectivity of chiral molecules (CISS properties) allows one to use the electron spin as a chiral bias for inducing asymmetric reactions and promoting enantiospecific processes. Two enantioselective electrochemical reactions that have used polarized electron spins as a chiral reagent are described; enantioselective electroreduction to resolve an enantiomer from a racemic mixture and an oxidative electropolymerization to generate a chiral polymer from achiral monomers. A complementary approach that has used spin-polarized, but otherwise achiral, molecular films to enantiospecifically associate with one enantiomer from a racemic mixture is also discussed. Each of these reaction types use magnetized films to generate the spin polarized electrons and the enantiospecificity can be selected by choice of the magnetization direction, North pole versus South pole. Possible paths for future research in this area and its compatibility with existing methods based on chiral electrodes are discussed.

Correlation between Ferromagnetic Layer Easy Axis and the Tilt Angle of Self Assembled Chiral Molecules.

The spin-spin interactions between chiral molecules and ferromagnetic metals were found to be strongly affected by the chiral induced spin selectivity effect. Previous works unraveled two complementary phenomena: magnetization reorientation of ferromagnetic thin film upon adsorption of chiral molecules and different interaction rate of opposite enantiomers with a magnetic substrate. These phenomena were all observed when the easy axis of the ferromagnet was out of plane. In this work, the effects of the ferromagnetic easy axis direction, on both the chiral molecular monolayer tilt angle and the magnetization reorientation of the magnetic substrate, are studied using magnetic force microscopy. We have also studied the effect of an applied external magnetic field during the adsorption process. Our results show a clear correlation between the ferromagnetic layer easy axis direction and the tilt angle of the bonded molecules. This tilt angle was found to be larger for an in plane easy axis as compared to an out of plane easy axis. Adsorption under external magnetic field shows that magnetization reorientation occurs also after the adsorption event. These findings show that the interaction between chiral molecules and ferromagnetic layers stabilizes the magnetic reorientation, even after the adsorption, and strongly depends on the anisotropy of the magnetic substrate. This unique behavior is important for developing enantiomer separation techniques using magnetic substrates.

The Electron Spin as a Chiral Reagent.

We show that enantioselective reactions can be induced by the electron spin itself and that it is possible to replace a conventional enantiopure chemical reagent by spin-polarized electrons that provide the chiral bias for enantioselective reactions. Three examples of enantioselective chemistry resulting from electron-spin polarization are presented. One demonstrates the enantioselective association of a chiral molecule with an achiral self-assembled monolayer film that is spin-polarized, while the other two show that the chiral bias provided by the electron helicity can drive both reduction and oxidation in enantiospecific electrochemical reactions. In each case, the enantioselectivity does not result from enantiospecific interactions of the molecule with the ferromagnetic electrode but from the polarized spin that crosses the interface between the substrate and the molecule. Furthermore, the direction of the electron-spin polarization defines the handedness of the enantioselectivity. This work demonstrates a new mechanism for realizing enantioselective chemistry.

Low-Resistance Molecular Wires Propagate Spin-Polarized Currents.

Spin based properties, applications, and devices are typically related to inorganic ferromagnetic materials. The development of organic materials for spintronic applications has long been encumbered by its reliance on ferromagnetic electrodes for polarized spin injection. The discovery of the chirality-induced spin selectivity (CISS) effect, in which chiral organic molecules serve as spin filters, defines a marked departure from this paradigm because it exploits soft materials, operates at ambient temperature, and eliminates the need for a magnetic electrode. To date, the CISS effect has been explored exclusively in molecular insulators. Here we combine chiral molecules, which serve as spin filters, with molecular wires that despite not being chiral, function to preserve spin polarization. Self-assembled monolayers (SAMs) of right-handed helical (l-proline)8 (Pro8) and corresponding peptides, N-terminal conjugated to (porphinato)zinc or meso-to-meso ethyne-bridged (porphinato)zinc structures (Pro8PZnn), were interrogated via magnetic conducting atomic force microscopy (mC-AFM), spin-dependent electrochemistry, and spin Hall devices that measure the spin polarizability that accompanies the charge polarization. These data show that chiral molecules are not required to transmit spin-polarized currents made possible by the CISS mechanism. Measured Hall voltages for Pro8PZn1-3 substantially exceed that determined for the Pro8 control and increase dramatically as the conjugation length of the achiral PZnn component increases; mC-AFM data underscore that measured spin selectivities increase with an increasing Pro8PZn1-3 N-terminal conjugation. Because of these effects, spin-dependent electrochemical data demonstrate that spin-polarized currents, which trace their genesis to the chiral Pro8 moiety, propagate with no apparent dephasing over the augmented Pro8PZnn length scales, showing that spin currents may be transmitted over molecular distances that greatly exceed the length of the chiral moiety that makes possible the CISS effect.

Control of Electrons' Spin Eliminates Hydrogen Peroxide Formation During Water Splitting.

The production of hydrogen through water splitting in a photoelectrochemical cell suffers from an overpotential that limits the efficiencies. In addition, hydrogen-peroxide formation is identified as a competing process affecting the oxidative stability of photoelectrodes. We impose spin-selectivity by coating the anode with chiral organic semiconductors from helically aggregated dyes as sensitizers; Zn-porphyrins and triarylamines. Hydrogen peroxide formation is dramatically suppressed, while the overall current through the cell, correlating with the water splitting process, is enhanced. Evidence for a strong spin-selection in the chiral semiconductors is presented by magnetic conducting (mc-)AFM measurements, in which chiral and achiral Zn-porphyrins are compared. These findings contribute to our understanding of the underlying mechanism of spin selectivity in multiple electron-transfer reactions and pave the way toward better chiral dye-sensitized photoelectrochemical cells.

Enhanced Hydrogen Production With Chiral Conductive Polymer-Based Electrodes.

Efficient photoelectrochemical production of hydrogen from water is the aim of many studies in recent decades. Typically, one observes that the electric potential required to initiate the process significantly exceeds the thermodynamic limit. It was suggested that by controlling the spins of the electrons that are transferred from the solution to the anode, and ensuring that they are co-aligned, the threshold voltage for the process can be decreased to that of the thermodynamic voltage. In the present study, by using anodes coated with chiral conductive polymer, the hydrogen production from water is enhanced and the threshold voltage is reduced, as compared with anodes coated with achiral polymer. When CdSe quantum dots were embedded within the polymer, the current density was doubled. These new results point to a possible new direction for producing inexpensive, environmental friendly, efficient water splitting photoelectrochemical cells.

New one-step thiol functionalization procedure for Ni by self-assembled monolayers.

This article reports on a facile and fast strategy for the self-assembled monolayer (SAM) functionalization of nickel surfaces, employing cyclic voltammetry (CV) cycling of a suitable tailored solution containing the species to be adsorbed. Results are presented for ultrathin films formed on Ni by 1-hexadecanethiol (C16), L-cysteine (L-cys), and the poly{methyl (2R)-3-(2,2'-bithiophen-4-ylsulfanyl)-2-[(tert-butoxycarbonyl)amino]propanoate} (PCT-L) thiophene-based chiral polymer. The effective formation of high-quality ultrathin organic films on the nickel was verified both electrochemically and by exploiting typical surface characterization techniques such as contact angle, ellipsometry, atomic force microscopy (AFM), polarization modulation-infrared reflection-absorption spectroscopy (PM-IRRAS), and X-ray photoelectron spectroscopy (XPS).

Electric-field-driven alignment of chiral conductive polymer thin films.

We investigated the effect of an electric field on the alignment and structural properties of thin films of a chiral polybithiophene-based conductive polymer, functionalized with a protected l-cysteine amino acid. Thin films were obtained by exploiting both drop-casting and spin-coating procedures. The electric properties, the polarized Raman spectrum, the UV-vis spectrum, and the CD spectra were measured as a function of the electric field intensity applied during film formation. It was found that beyond the enhancement of the conductivity observed when the electric field aligns the polymer, the electric field significantly affects the chiral properties and the effect depends on the method of deposition.

Electron Spin Polarization and Rectification Driven by Chiral Perylene Diimide-Based Nanodonuts.

The chirality-induced spin selectivity (CISS) effect allows thin-film layers of chiral conjugated molecules to function as spin filters at ambient temperature. Through solvent-modulated dropcasting of chiral l- and d-perylene diimide (PDI) monomeric building blocks, two types of aggregate morphologies, nanofibers and nanodonuts, may be realized. Spin-diode behavior is evidenced in the nanodonut structures. Stacked PDI units, which form the conjugated core of these nanostructures, dominate the nanodonut-Au electrode contact; in contrast, the AFM tip contacts largely the high-resistance solubilizing alkyl chains of the chiral monomers that form these nanodonuts. Current-voltage responses of the nanodonuts, measured by magnetic conductive AFM (mC-AFM), demonstrate substantial spin polarizations as well as spin current rectification ratios (>10) that exceed the magnitudes of those determined to date for other chiral nanoscale systems. These results underscore the potential for chiral nanostructures, featuring asymmetric molecular junctions, to enable CISS-based nanoscale spin current rectifiers.

On the hybrid glassy carbon electrode/OligoThiophene/Ag(NP) interface.

GC/OligoThiophene/Ag(NP) hybrid interfaces are synthesized and characterized: GC is the glassy carbon surface; OligoThiophene stands for both an ultrathin bithiophene grafted film and a 4-Br-Bithiophene grafted polymer; Ag(NP) stands for silver nanoparticles. The hybrid interface preparation involves different steps: first, the electrode surface is functionalized through a combination of electrochemically assisted grafting (under reduction regime) and polymerization (under oxidation regime); then, silver nanoparticles are chemisorbed by dipping. In particular, an ultrathin film of grafted bithiophene can be obtained by applying one cyclic voltammetry reduction cycle (GC/BT surface), while subsequent cyclic voltammetry cycling under oxidation regime yields an immobilized 4Br-Bithiophene polymer (GC/4BrBT surface). AFM and TEM images were recorded to investigate the morphology and chemical composition of the Ag(NP). Fe(II)/Fe(III) cyclic voltammetry, Zn underpotential deposition (UPD), XPS, LA-ICP-MS, and Raman techniques were exploited to characterize both the GC/OligoThiophene and GC/OligoThiophene/Ag(NP) interfaces. Theoretical calculation, at the B3LYP/6-311G** level of the theory, enabled rationalization of the electroreduction mechanism and the Raman results.

Spin-induced asymmetry reaction-The formation of asymmetric carbon by electropolymerization.

We describe the spin polarization-induced chirogenic electropolymerization of achiral 2-vinylpyridine, which forms a layer of enantioenhanced isotactic polymer on the electrode. The product formed is enantioenriched in asymmetric carbon polymer. To confirm the chirality of the polymer film formed on the electrode, we also measured its electron spin polarization properties as a function of its thickness. Two methods were used: First, spin polarization was measured by applying magnetic contact atomic force microscopy, and second, magnetoresistance was assessed in a sandwich-like four-point contact structure. We observed high spin-selective electron transmission, even for a layer thickness of 120 nm. A correlation exists between the change in the circular dichroism signal and the change in the spin polarization, as a function of thickness. The spin-filtering efficiency increases with temperature.

Multistate Switching of Spin Selectivity in Electron Transport through Light-Driven Molecular Motors.

It is established that electron transmission through chiral molecules depends on the electron's spin. This phenomenon, termed the chiral-induced spin selectivity (CISS), effect has been observed in chiral molecules, supramolecular structures, polymers, and metal-organic films. Which spin is preferred in the transmission depends on the handedness of the system and the tunneling direction of the electrons. Molecular motors based on overcrowded alkenes show multiple inversions of helical chirality under light irradiation and thermal relaxation. The authors found here multistate switching of spin selectivity in electron transfer through first generation molecular motors based on the four accessible distinct helical configurations, measured by magnetic-conductive atomic force microscopy. It is shown that the helical state dictates the molecular organization on the surface. The efficient spin polarization observed in the photostationary state of the right-handed motor coupled with the modulation of spin selectivity through the controlled sequence of helical states, opens opportunities to tune spin selectivity on-demand with high spatio-temporal precision. An energetic analysis correlates the spin injection barrier with the extent of spin polarization.