RESUMO
Millions of years of evolution have allowed animals to develop unusual locomotion capabilities. A striking example is the legless-jumping of click beetles and trap-jaw ants, which jump more than 10 times their body length. Their delicate musculoskeletal system amplifies their muscles' power. It is challenging to engineer insect-scale jumpers that use onboard actuators for both elastic energy storage and power amplification. Typical jumpers require a combination of at least two actuator mechanisms for elastic energy storage and jump triggering, leading to complex designs having many parts. Here, we report the new concept of dynamic buckling cascading, in which a single unidirectional actuation stroke drives an elastic beam through a sequence of energy-storing buckling modes automatically followed by spontaneous impulsive snapping at a critical triggering threshold. Integrating this cascade in a robot enables jumping with unidirectional muscles and power amplification (JUMPA). These JUMPA systems use a single lightweight mechanism for energy storage and release with a mass of 1.6 g and 2 cm length and jump up to 0.9 m, 40 times their body length. They jump repeatedly by reengaging the latch and using coiled artificial muscles to restore elastic energy. The robots reach their performance limits guided by theoretical analysis of snap-through and momentum exchange during ground collision. These jumpers reach the energy densities typical of the best macroscale jumping robots, while also matching the rapid escape times of jumping insects, thus demonstrating the path toward future applications including proximity sensing, inspection, and search and rescue.
Assuntos
Formigas , Besouros , Robótica , Animais , Locomoção/fisiologia , Músculos , Fenômenos BiomecânicosRESUMO
A snap-through bifurcation occurs when a bistable structure loses one of its stable states and moves rapidly to the remaining state. For example, a buckled arch with symmetrically clamped ends can snap between an inverted and a natural state as the ends are released. A standard linear stability analysis suggests that the arch becomes unstable to asymmetric perturbations. Surprisingly, our experiments show that this is not always the case: symmetric transitions are also observed. Using experiments, numerics, and a toy model, we show that the symmetry of the transition depends on the rate at which the ends are released, with sufficiently fast loading leading to symmetric snap-through. Our toy model reveals that this behavior is caused by a region of the system's state space in which any initial asymmetry is amplified. The system may not enter this region when loaded fast (hence remaining symmetric), but will traverse it for some interval of time when loaded slowly, causing a transient amplification of asymmetry. Our toy model suggests that this behavior is not unique to snapping arches, but rather can be observed in dynamical systems where both a saddle-node and a pitchfork bifurcation occur in close proximity.
RESUMO
The interfacial interaction of 2D materials with the substrate leads to striking surface faceting affecting its electronic properties. Here, we quantitatively study the orientation-dependent facet topographies observed on the catalyst under graphene using electron backscatter diffraction and atomic force microscopy. The original flat catalyst surface transforms into two facets: a low-energy low-index surface, e.g. (111), and a vicinal (high-index) surface. The critical role of graphene strain, besides anisotropic interfacial energy, in forming the observed topographies is revealed by molecular simulations. These insights are applicable to other 2D/3D heterostructures.
RESUMO
Eco/bioresorbable electronics represent an emerging class of technology defined by an ability to dissolve or otherwise harmlessly disappear in environmental or biological surroundings after a period of stable operation. The resulting devices provide unique capabilities as temporary biomedical implants, environmental sensors, and related systems. Recent publications report schemes to overcome challenges in fabrication that follow from the low thermostability and/or high chemical reactivity of the eco/bioresorbable constituent materials. Here, this work reports the use of high-speed sewing machines, as the basis for a high-throughput manufacturing technique that addresses many requirements for these applications, without the need for high temperatures or reactive solvents. Results demonstrate that a range of eco/bioresorbable metal wires and polymer threads can be embroidered into complex, user-defined conductive patterns on eco/bioresorbable substrates. Functional electronic components, such as stretchable interconnects and antennas are possible, along with fully integrated systems. Examples of the latter include wirelessly powered light-emitting diodes, radiofrequency identification tags, and temporary cardiac pacemakers. These advances add to a growing range of options in high-throughput, automated fabrication of eco/bioresorbable electronics.
Assuntos
Implantes Absorvíveis , Eletrônica , Metais , Polímeros , SolventesRESUMO
On-chip phononic circuits tailor the transmission of elastic waves and couple to electronics and photonics to enable new signal manipulation capabilities. Phononic circuits rely on waveguides that transmit elastic waves within desired frequency passbands, which are typically designed based on the Bloch modes of the constitutive unit cell of the waveguide, assuming periodicity. Acoustic microelectromechanical system waveguides composed of coupled drumhead resonators offer megahertz operation frequencies for applications in acoustic switching. Here, we construct a reduced-order model (ROM) to demonstrate the mechanism of transmission switching in coupled drumhead-resonator waveguides. The ROM considers the mechanics of buckling under the effect of temperature variation. Each unit cell has two degrees of freedom: translation to capture the symmetric bending modes and angular motion to capture the asymmetric bending modes of the membranes. We show that thermoelastic buckling induces a phase transition triggered by temperature variation, causing the localization of the first-passband modes, similar to Anderson localization caused by disorders. The proposed ROM is essential to understanding these phenomena since Bloch mode analysis fails for weakly disordered (<5%) finite waveguides due to the disorder amplification caused by the thermoelastic buckling. The illustrated transmission control can be extended to two-dimensional circuits in the future.
RESUMO
Drying of fine hair and fibers induces dramatic capillary-driven deformation, with important implications on natural phenomena and industrial processes. We recently observed peculiar self-assembly of hair bundles into various distinct patterns depending on the interplay between the bundle length and the liquid drain rate. Here, we propose a mechanism for this pattern selection, and derive and validate theoretical scaling laws for the polymorphic self-assembly of polygonal hair bundles. Experiments are performed by submerging the bundles into a liquid bath, then draining down the liquid. Depending on the interplay between the drain rates and the length of the fibers, we observe the bundles morphing into stars (having concave sides), polygons (having straight edges and rounded corners), or circles. The mechanism of self-assembly at the high drain regime is governed by two sequential stages. In the first stage of the high drain rate regime, the liquid covers the outside of the bundles, and drainage from inside the bundle does not play a role in the self-assembly due to the high viscous stress. The local pressure at the corners of the wet bundles compresses the fibers inward blunting the corners, and the internal lubrication facilitates fiber rearrangement. In the second stage, the liquid is slowly draining from within the fiber spacing, and the negative capillary pressure at the perimeter causes the fibers to tightly pack. In the slow drainage regime, the first stage is absent, and the fibers slowly aggregate without initial dynamic rearrangement. Understanding the mechanism of dynamic elastocapillarity offers insights for studying the complicated physics of wet granular drying.
RESUMO
Waveguides for mechanical signal transmission in the megahertz to gigahertz regimes enable on-chip phononic circuitry, which brings new capabilities complementing photonics and electronics. Lattices of coupled nano-electromechanical drumhead resonators are suitable for these waveguides due to their high Q-factor and precisely engineered band structure. Here, we show that thermally induced elastic buckling of such resonators causes a phase transition in the waveguide leading to reversible control of signal transmission. Specifically, when cooled, the lowest-frequency transmission band associated with the primary acoustic mode vanishes. Experiments show the merging of the lower and upper band gaps, such that signals remain localized at the excitation boundary. Numerical simulations show that the temperature-induced destruction of the pass band is a result of inhomogeneous elastic buckling, which disturbs the waveguide's periodicity and suppresses the wave propagation. Mechanical phase transitions in waveguides open opportunities for drastic phononic band reconfiguration in on-chip circuitry and computing.
Assuntos
AcústicaRESUMO
We report polymorphic self-assembly of hair arranged in hollow bundles driven by capillarity, hydrodynamics, and elasticity. Bundles emerging from a liquid bath shrink but remain hollow at slow drainage due to the negative pressure of the menisci trapped between the hairs. The timescale allows the collective stiffening of the fibers to resist closure. At fast drainage, the bundles fully close before the liquid can drain through the hair. A liquid column trapped in the hole closes the bundle while the lubricated hairs still behave softly. Scaling laws predict this reversible hair polymorphism.
RESUMO
We investigate the self-assembly of hair-like fibers into twisted helices as they are pulled through the liquid interface at a controlled rate. Capillary-induced spontaneous fiber twisting phenomena are observed from the nano- to the millimeter scale. Here, we control the drain rate of the liquid and observe two regimes of self-assembly of long hairs. At low drain rates, the hairs coalesce radially to form a dense aggregate. At higher drain rates, spontaneous hair twisting occurs. We find that the drain rate corresponding to the twisting threshold scales with the characteristic velocity of fiber coalescence set by a balance between liquid viscosity µ and surface energy σ and reads â¼(σ/µ)·(S/l)2 where S and l are the spacing between hairs and their length, respectively. At drain rates higher than this threshold, liquid is entrained between the hairs as they emerge from the liquid surface, forming a circular liquid column. Twisting is induced by the fast radial shrinking of this liquid column, combined with the nonlinear resistance to the hairs' radial versus tangential coalescence. Understanding the kinetics is crucial to control this complex self-assembly and to engineer fiber drying processes at various length scales.
RESUMO
We report various patterns formed by draining liquid from hair bundles. Hair-like fibers arranged in triangular bundles self-assemble into various cross sections when immersed in liquid then removed. The combinations of their length and the kinetics, represented by the drain rate, lead to various polymorphic self-assemblies: concave hexagonal, triangular, circular, or inverted triangular patterns. The equilibrium of these shapes is predicted by elastocapillarity, the balance between the bending strain energy of the hairs and the surface energy of the liquid. Shapes with a larger strain energy, such as the inverted triangular bundles, are obtained at the higher liquid drain rates. This polymorphic self-assembly is fully reversible by rewetting and draining and can have applications in multifunctional dynamic textures.
RESUMO
Elastocapillary self-assembly is emerging as a versatile technique to manufacture three-dimensional (3D) microstructures and complex surface textures from arrangements of micro- and nanoscale filaments. Understanding the mechanics of capillary self-assembly is essential to engineering of properties such as shape-directed actuation, anisotropic wetting and adhesion, and mechanical energy transfer and dissipation. We study elastocapillary self-assembly (herein called "capillary forming") of carbon nanotube (CNT) microstructures, combining in situ optical imaging, micromechanical testing, and finite element modeling. By imaging, we identify sequential stages of liquid infiltration, evaporation, and solid shrinkage, whose kinetics relate to the size and shape of the CNT microstructure. We couple these observations with measurements of the orthotropic elastic moduli of CNT forests to understand how the dynamic of shrinkage of the vapor-liquid interface is coupled to the compression of the forest. We compare the kinetics of shrinkage to the rate of evporation from liquid droplets having the same size and geometry. Moreover, we show that the amount of shrinkage during evaporation is governed by the ability of the CNTs to slip against one another, which can be manipulated by the deposition of thin conformal coatings on the CNTs by atomic layer deposition (ALD). This insight is confirmed by finite element modeling of pairs of CNTs as corrugated beams in contact and highlights the coupled role of elasticity and friction in shrinkage and stability of nanoporous solids. Overall, this study shows that nanoscale porosity can be tailored via the filament density and adhesion at contact points, which is important to the development of lightweight multifunctional materials.
Assuntos
Nanoestruturas/química , Nanotubos de Carbono/química , Elasticidade , Cinética , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Soft robotics offer unusual bioinspired solutions to challenging engineering problems. Colorful display and morphing appendages are vital signaling modalities used by natural creatures to camouflage, attract mates, or deter predators. Engineering these display capabilities using traditional light emitting devices is energy expensive and bulky and requires rigid substrates. Here, we use capillary-controlled robotic flapping fins to create switchable visual contrast and produce state-persistent, multipixel displays that are 1000- and 10-fold more energy efficient than light emitting devices and electronic paper, respectively. We reveal the bimorphic ability of these fins, whereby they switch between straight or bent stable equilibria. By controlling the droplets temperature across the fins, the multifunctional cells simultaneously exhibit infrared signals decoupled from the optical signals for multispectral display. The ultralow power, scalability, and mechanical compliance make them suitable for curvilinear and soft machines.
Assuntos
Nadadeiras de Animais , Robótica , Animais , Ação Capilar , Eletrônica , EngenhariaRESUMO
We demonstrate the fabrication of horizontally aligned carbon nanotube (HA-CNT) networks by spatially programmable folding, which is induced by self-directed liquid infiltration of vertical CNTs. Folding is caused by a capillary buckling instability and is predicted by the elastocapillary buckling height, which scales with the wall thickness as t(3/2). The folding direction is controlled by incorporating folding initiators at the ends of the CNT walls, and the initiators cause a tilt during densification which precedes buckling. By patterning these initiators and specifying the wall geometry, we control the dimensions of HA-CNT patches over 2 orders of magnitude and realize multilayered and multidirectional assemblies. Multidirectional HA-CNT patterns are building blocks for custom design of nanotextured surfaces and flexible circuits.
RESUMO
We study nonreciprocal wave transmission across the interface of two dissimilar granular media separated by an elastic solid medium. Specifically, a left, larger-scale and a right smaller-scale granular media composed of two-dimensional, initially uncompressed hexagonally packed granules are interfacing with an intermediate linearly elastic solid, modeled either as a thin elastic plate or a linear Euler-Bernoulli beam. The granular media are modeled by discrete elements and the elastic solid by finite elements assuming a plane stress approximation for the thin plate. Accounting for the combined effects of Hertzian, frictional and rotational interactions in the granular media, as well as the highly discontinuous interfacial effects between the (discrete) granular media and the (continuous) intermediate elastic solid, the nonlinear acoustics of the integrated system is computationally studied subject to a half-sine shock excitation applied to a boundary granule of either the left or right granular medium. The highly discontinuous and nonlinear interaction forces coupling the granular media to the elastic solid are accurately computed through an algorithm with interrelated iteration and interpolation at successive adaptive time steps. Numerical convergence is ensured by monitoring the (linearized) eigenvalues of a nonlinear map of interface forces at each (variable) time step. Due to the strong nonlinearity and hierarchical asymmetry of the left and right granular media, time scale disparity occurs in the response of the interface which breaks acoustic reciprocity. Specifically, depending on the location and intensity of the applied shock, propagating wavefronts are excited in the granular media, which, in turn, excite either (slow) low-frequency vibrations or (fast) high-frequency acoustics in the intermediate elastic medium. This scale disparity is due to the size disparity of the left and right granular media, which yields drastically different wave speeds in the resulting propagating wavefronts. As a result, the continuum part of the interface responds with either low-frequency vibrations-when the shock is applied to the larger-scale granular medium, or high-frequency waves-when the shock is applied to the smaller-scale granular medium. This provides the fundamental mechanism for breaking reciprocity in the interface. The nonreciprocal interfacial acoustics studied here apply to a broad class of asymmetric hybrid (discrete-continuum) nonlinear systems and can inform predictive designs of highly effective granular shock protectors or granular acoustic diodes.
RESUMO
Success in making artificial muscles that are faster and more powerful and that provide larger strokes would expand their applications. Electrochemical carbon nanotube yarn muscles are of special interest because of their relatively high energy conversion efficiencies. However, they are bipolar, meaning that they do not monotonically expand or contract over the available potential range. This limits muscle stroke and work capacity. Here, we describe unipolar stroke carbon nanotube yarn muscles in which muscle stroke changes between extreme potentials are additive and muscle stroke substantially increases with increasing potential scan rate. The normal decrease in stroke with increasing scan rate is overwhelmed by a notable increase in effective ion size. Enhanced muscle strokes, contractile work-per-cycle, contractile power densities, and energy conversion efficiencies are obtained for unipolar muscles.
Assuntos
Órgãos Artificiais , Contração Muscular , Músculos , Nanotubos de CarbonoRESUMO
We report a two-step chemical vapor deposition (CVD) method for fabrication of hierarchical polymer-coated carbon nanotube (CNT) microstructures having tunable mechanical properties and accessible chemical functionality. Diverse geometries of vertically aligned CNTs were grown from lithographically patterned catalyst films, and the CNT microstructures were chemically functionalized via poly[4-trifluoroacetyl-p-xylylene-co-p-xylylene] made by chemical vapor deposition polymerization. The polymer coating conformally coated the individual CNTs and CNT bundles within the CNT "forest". The chemical structure of the polymer films was verified by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). Simple control of the mechanical properties of the nanocomposite structures can be achieved by adjusting the deposition times during CVD polymerization. Increasing the polymer film thickness from 10 nm to 27 nm resulted in a change of the Young's modulus from 65 to 80 MPa. These values are substantially higher than the 36 MPa measured for the as-grown CNTs without polymer coating. The effect of the polymer coating in reinforcing the connectivity among CNTs within the structures has been understood using an analytical model. Finally, chemical functionality of the CNT composite structures after CVD polymerization was verified by a 4-fold fluorescence enhancement after binding of a dye to the coated CNT microstructures. This technique can be adapted to a wide variety of reactive coatings and facilitates attachment of chemical groups and functional nanostructures on the surfaces of the CNTs; therefore, this material could serve as a tunable platform for coupling mechanical and chemical responses in materials for environmental and biological sensing.
RESUMO
The COVID-19 pandemic disrupted the world in 2020 by spreading at unprecedented rates and causing tens of thousands of fatalities within a few months. The number of deaths dramatically increased in regions where the number of patients in need of hospital care exceeded the availability of care. Many COVID-19 patients experience Acute Respiratory Distress Syndrome (ARDS), a condition that can be treated with mechanical ventilation. In response to the need for mechanical ventilators, designed and tested an emergency ventilator (EV) that can control a patient's peak inspiratory pressure (PIP) and breathing rate, while keeping a positive end expiratory pressure (PEEP). This article describes the rapid design, prototyping, and testing of the EV. The development process was enabled by rapid design iterations using additive manufacturing (AM). In the initial design phase, iterations between design, AM, and testing enabled a working prototype within one week. The designs of the 16 different components of the ventilator were locked by additively manufacturing and testing a total of 283 parts having parametrically varied dimensions. In the second stage, AM was used to produce 75 functional prototypes to support engineering evaluation and animal testing. The devices were tested over more than two million cycles. We also developed an electronic monitoring system and with automatic alarm to provide for safe operation, along with training materials and user guides. The final designs are available online under a free license. The designs have been transferred to more than 70 organizations in 15 countries. This project demonstrates the potential for ultra-fast product design, engineering, and testing of medical devices needed for COVID-19 emergency response.
Assuntos
COVID-19/terapia , Desenho de Equipamento/métodos , Respiração Artificial/instrumentação , Ventiladores Mecânicos/efeitos adversos , Animais , COVID-19/patologia , Humanos , Respiração Artificial/métodos , Mecânica Respiratória/fisiologia , Taxa Respiratória/fisiologia , SARS-CoV-2 , SuínosRESUMO
We use aligned carbon nanotube (CNT) forests as scaffolds to deposit hafnium diboride (HfB2) and fabricate millimeter-thick ultrahigh-temperature composite coating. HfB2 has a melting temperature of 3250 °C, which makes it an attractive candidate for applications requiring operation in extreme environments. Compared to typical refractory HfB2 processing, which requires temperatures exceeding 1500 °C, we use conformal HfB2 chemical vapor deposition (CVD) to coat CNT forests at a low temperature of 200 °C. During this process, nanometer-thin HfB2 films grow on the CNT surface and uniformly fill tall CNT forests, thus transforming nanometer film deposition to a scalable HfB2 coating technology. The conformal HfB2 coating process uses static (S-) CVD, where the precursor is fed into a closed system, enabling highly conformal coating and economically efficient utilization of the HfB2 precursor reaching 85%. The modulus and compressive strength of the composites are measured using flat-punch indentation of micropillars having various coating thickness. Filling the CNTs with HfB2 strengthens their node morphology and effectively enhances the mechanical properties. We study the nonlinear behavior of the material to extract a unique modulus value that describes the stress-strain response at any applied compression. At the highest HfB2 coating thickness of 45 nm, the solid fraction is increased from 2% for the bare CNTs to 36% for the composite; the modulus and strength reach 107 and 1.5 GPa, respectively. An analytical model is used to explain the mechanism of the measured structure-mechanical property scaling. Finally, the process is used to fabricate CNT-HfB2 films having 1.7 mm height, a centimeter square area, and only 5.8 × 10-6 nm/nm thickness gradient to demonstrate the potential for scalability.
RESUMO
In linear time-invariant systems acoustic reciprocity holds by the Onsager-Casimir principle of microscopic reversibility, and it can be broken only by odd external biases, nonlinearities, or time-dependent properties. Recently it was shown that one-dimensional lattices composed of a finite number of identical nonlinear cells with internal scale hierarchy and asymmetry exhibit nonreciprocity both locally and globally. Considering a single cell composed of a large scale nonlinearly coupled to a small scale, local dynamic nonreciprocity corresponds to vibration energy transfer from the large to the small scale, but absence of energy transfer (and localization) from the small to the large scale. This has been recently proven both theoretically and experimentally. Then, considering the entire lattice, global acoustic nonreciprocity has been recently proven theoretically, corresponding to preferential energy transfer within the lattice under transient excitation applied at one of its boundaries, and absence of similar energy transfer (and localization) when the excitation is applied at its other boundary. This work provides experimental validation of the global acoustic nonreciprocity with a one-dimensional asymmetric lattice composed of three cells, with each cell incorporating nonlinearly coupled large and small scales. Due to the intentional asymmetry of the lattice, low impulsive excitations applied to one of its boundaries result in wave transmission through the lattice, whereas when the same excitations are applied to the other end, they lead in energy localization at the boundary and absence of wave transmission. This global nonreciprocity depends critically on energy (i.e., the intensity of the applied impulses), and reduced-order models recover the nonreciprocal acoustics and clarify the nonlinear mechanism generating nonreciprocity in this system.
RESUMO
In linear time-invariant dynamical and acoustical systems, reciprocity holds by the Onsager-Casimir principle of microscopic reversibility, and this can be broken only by odd external biases, nonlinearities, or time-dependent properties. A concept is proposed in this work for breaking dynamic reciprocity based on irreversible nonlinear energy transfers from large to small scales in a system with nonlinear hierarchical internal structure, asymmetry, and intentional strong stiffness nonlinearity. The resulting nonreciprocal large-to-small scale energy transfers mimic analogous nonlinear energy transfer cascades that occur in nature (e.g., in turbulent flows), and are caused by the strong frequency-energy dependence of the essentially nonlinear small-scale components of the system considered. The theoretical part of this work is mainly based on action-angle transformations, followed by direct numerical simulations of the resulting system of nonlinear coupled oscillators. The experimental part considers a system with two scales-a linear large-scale oscillator coupled to a small scale by a nonlinear spring-and validates the theoretical findings demonstrating nonreciprocal large-to-small scale energy transfer. The proposed study promotes a paradigm for designing nonreciprocal acoustic materials harnessing strong nonlinearity, which in a future application will be implemented in designing lattices incorporating nonlinear hierarchical internal structures, asymmetry, and scale mixing.