Development of a rapid, efficient, and reusable magnetic bead-based immunocapture system for recombinant human procollagen type II isolation from yeast fermentation broth.

Recombinant collagen production, especially using yeasts as expression systems, could represent a promising alternative over traditional extractive methods from animal sources, offering controllable, scalable, and high-quality products. Monitoring the efficiency and efficacy of procollagen/collagen expression, especially in the initial fermentation phases, can be difficult and time consuming, as biological matrices necessitate purification and commonly used analytical methods are only partially informative. We propose a straightforward, efficient, and reusable immunocapture system able to specifically isolate human procollagen type II from fermentation broths and to release it in few experimental steps. A recovered sample allows for a detailed characterization providing information on structural identity and integrity, which can strongly support the monitoring of fermentation processes. The immunocapture system relies on the use of protein A-coated magnetic beads which have been functionalized and cross-linked with a human anti-procollagen II antibody (average immobilization yield of 97.7%) to create a stable and reusable support for the specific procollagen fishing. We set up the binding and release conditions ensuring specific and reproducible binding with a synthetic procollagen antigen. The absence of non-specific interaction with the support and binding specificity was demonstrated, and the latter was also confirmed by a peptide mapping epitope study in reversed-phase liquid chromatography high-resolution mass spectrometry (RP-LC-HRMS). The bio-activated support proved to be reusable and stable over 21 days from the initial use. Finally, the system was successfully tested on a raw yeast fermentation sample to provide a proof of concept of the applicability within recombinant collagen production.

Hovenia dulcis Thumberg: Phytochemistry, Pharmacology, Toxicology and Regulatory Framework for Its Use in the European Union.

Hovenia dulcis Thunberg is an herbal plant, belonging to the Rhamnaceae family, widespread in west Asia, USA, Australia and New Zealand, but still almost unknown in Western countries. H. dulcis has been described to possess several pharmacological properties, such as antidiabetic, anticancer, antioxidant, anti-inflammatory and hepatoprotective, especially in the hangover treatment, validating its use as an herbal remedy in the Chinese Traditional Medicine. These biological properties are related to a variety of secondary metabolites synthesized by the different plant parts. Root, bark and leaves are rich of dammarane-type triterpene saponins; dihydrokaempferol, quercetin, 3,3',5',5,7-pentahydroflavone and dihydromyricetin are flavonoids isolated from the seeds; fruits contain mainly dihydroflavonols, such as dihydromyricetin (or ampelopsin) and hovenodulinol, and flavonols such as myricetin and gallocatechin; alkaloids were found in root, barks (frangulanin) and seeds (perlolyrin), and organic acids (vanillic and ferulic) in hot water extract from seeds. Finally, peduncles have plenty of polysaccharides which justify the use as a food supplement. The aim of this work is to review the whole scientific production, with special focus on the last decade, in order to update phytochemistry, biological activities, nutritional properties, toxicological aspect and regulatory classification of H. dulcis extracts for its use in the European Union.

Epitope and affinity determination of recombinant Mycobacterium tuberculosis Ag85B antigen towards anti-Ag85 antibodies using proteolytic affinity-mass spectrometry and biosensor analysis.

Tuberculosis (TB) is the first cause of death from infectious diseases worldwide. Only a single anti-TB vaccine is currently available for clinical use, but its efficacy is not achieved with certainty. The aim of this work is to provide a basis for the rational design of a neo-glycoconjugate vaccine against TB. Structural characterization of recombinant antigenic proteins from Mycobacterium tuberculosis (MTB) Ag85B (rAg85B, variants, and semi-synthetic glycoconjugates) was initially carried out. Identification of antibody epitope analyses by proteolytic affinity-mass spectrometry and surface plasmon resonance (SPR) biosensor analyses were performed in order to qualitatively identify and quantitatively characterize interaction structures of the antigens with antibodies from different sources. A commercial monoclonal antibody and polyclonal antibodies from different sources (patients with active TB, vaccinated individuals, and a healthy control) were employed to analyze antigen-antibody interactions. These combined approaches provided the identification of different assembled epitope regions on the recombinant MTB antigens, their affinity binding constants in the interactions with specific antibodies, and revealed the importance of protection from excessive glycosylation. The identified epitope peptides should constitute a suitable basis for the design of new specific target vaccines. Graphical abstract ᅟ.

A Proteomic-Based Approach to Study the Mechanism of Cytotoxicity Induced by Interleukin-1α and Cycloheximide.

ABSTRACT: The exposure of HeLa cells to interleukin-1 alpha (IL-1α) in the presence of cycloheximide (CHX) leads to the release of active tumor necrosis factor alpha (TNF-α), eliciting cytocidal effect on these cells. A mass spectrometry (MS)-based analysis of the qualitative proteomic profiles of the HeLa cells treated only with IL-1α, CHX or simultaneously with IL-1α and CHX, in comparison to an untreated control, enabled to distinguish protein candidates possibly involved in this process. Among them protein disulphide isomerase (PDI) seemed to be particularly interesting for further research. Therefore, we focused on quantitative changes of PDI levels in HeLa cells subjected to IL-1α and CHX. Enzyme-linked immunosorbent assay (ELISA) was employed for determination of PDI concentrations in the investigated, differently treated HeLa cells. The obtained results confirmed up-regulation of PDI only in the cells stimulated with IL-1α alone. In contrary, the PDI levels in HeLa cells exposed to both IL-1α and CHX, where apoptotic process was intensive, did not increase significantly. Finally, we discuss how different expression levels of PDI together with other proteins, which were detected in this study, may influence the induction of cytotoxic effect and modulate sensitivity to cytotoxic action of IL1.

Glycosylation of Recombinant Antigenic Proteins from Mycobacterium tuberculosis: In Silico Prediction of Protein Epitopes and Ex Vivo Biological Evaluation of New Semi-Synthetic Glycoconjugates.

Tuberculosis is still one of the most deadly infectious diseases worldwide, and the use of conjugated antigens, obtained by combining antigenic oligosaccharides, such as the lipoarabinomannane (LAM), with antigenic proteins from Mycobacterium tuberculosis (MTB), has been proposed as a new strategy for developing efficient vaccines. In this work, we investigated the effect of the chemical glycosylation on two recombinant MTB proteins produced in E. coli with an additional seven-amino acid tag (recombinant Ag85B and TB10.4). Different semi-synthetic glycoconjugated derivatives were prepared, starting from mannose and two disaccharide analogs. The glycans were activated at the anomeric position with a thiocyanomethyl group, as required for protein glycosylation by selective reaction with lysines. The glycosylation sites and the ex vivo evaluation of the immunogenic activity of the different neo-glycoproteins were investigated. Glycosylation does not modify the immunological activity of the TB10.4 protein. Similarly, Ag85B maintains its B-cell activity after glycosylation while showing a significant reduction in the T-cell response. The results were correlated with the putative B- and T-cell epitopes, predicted using a combination of in silico systems. In the recombinant TB10.4, the unique lysine is not included in any T-cell epitope. Lys30 of Ag85B, identified as the main glycosylation site, proved to be the most important site involved in the formation of T-cell epitopes, reasonably explaining why its glycosylation strongly influenced the T-cell activity. Furthermore, additional lysines included in different epitopes (Lys103, -123 and -282) are also glycosylated. In contrast, B-cell epitopic lysines of Ag85B were found to be poorly glycosylated and, thus, the antibody interaction of Ag85B was only marginally affected after coupling with mono- or disaccharides.

Monitoring antigenic protein integrity during glycoconjugate vaccine synthesis using capillary electrophoresis-mass spectrometry.

A capillary electrophoresis-mass spectrometry (CE-MS) method was developed for the characterization and integrity assessment of the Mycobacterium tuberculosis (MTB) antigens TB10.4 and Ag85B and their chemically produced glycoconjugates, which are glycovaccine candidates against tuberculosis (TB). In order to prevent protein adsorption to the inner capillary wall and to achieve efficient separation of the antigen proteoforms, a polyionic multilayer coating of polybrene-dextran sulfate-polybrene (PB-DS-PB) was used in combination with 1.5 M acetic acid as background electrolyte (BGE). Coupling of CE to high-resolution time-of-flight MS was achieved by a coaxial interface employing a sheath liquid of isopropanol-water (50:50, v/v) containing 0.1 % formic acid. The MTB antigens were exposed to experimental conditions used for chemical glycosylation (but no activated saccharide was added) in order to investigate their stability during glycovaccine production. CE-MS analysis revealed the presence of several closely related degradation products, including truncated, oxidized and conformational variants, which were assigned by accurate mass. Analysis of synthesized mannose conjugates of TB10.4 and Ag85B allowed the determination of the glycoform composition of the neo-glycoproteins next to the characterization of degradation products which were shown to be partly glycoconjugated. Moreover, the selectivity of CE-MS allowed specific detection of deamidated species (protein mass change of 1.0 Da only), indicating that chemical glycosylation increased susceptibility to deamidation. Overall, the results show that CE-MS represents a useful analytical tool for the detailed characterization and optimization of neo-glycoconjugate products. Graphical Abstract Flowchart illustrating Mycobacterium tuberculosis (MTB) antigen glycosylation, glycoconjugate variant and degradation product separation by capillary electrophoresis (CE) and their characterization by intact mass spectrometry (MS).

Characterization of intact neo-glycoproteins by hydrophilic interaction liquid chromatography.

In this study, an HPLC HILIC-UV method was developed for the analysis of intact neo-glycoproteins. During method development the experimental conditions evaluated involved different HILIC columns (TSKgel Amide-80 and ZIC-pHILIC), and water-acetonitrile mixtures containing various types of acids and salts. The final selected method was based on a TSKgel Amide-80 column and a mobile phase composed of acetonitrile and water both containing 10 mM HClO4. The influence of temperature and sample preparation on the chromatographic performances of the HILIC method was also investigated. The method was applied to the separation of neo-glycoproteins prepared starting from the model protein RNase A by chemical conjugation of different glycans. Using the method here reported it was possible to monitor by UV detection the glycosylation reaction and assess the distribution of neo-glycoprotein isoforms without laborious sample workup prior to analysis.

Combination of a solid phase extraction and a two-dimensional LC-UV method for the analysis of vitamin D3 and its isomers in olive oil.

The current HPLC methods for the quantification of vitamin D3 (VitD3) and its two isomers previtamin D3 (PreVitD3) and trans-vitamin D3 (trans-VitD3) in olive oil preparations present some limitations mainly due to peak overlapping of the oily matrix components with the compounds of interest. The use of two-dimensional liquid chromatography (2D-LC) with different retention mechanism can reach higher resolving power thus allowing the analysis of complex samples. The present paper proposes a new alternative method including a solid phase extraction sample preparation step and a two-dimensional liquid chromatographic analysis using routine instrumentation, fitting the needs of quality assurance and quality control laboratories of pharmaceutical companies. The extraction protocol was demonstrated to provide a clean-up of the sample and a quantitative recovery of the species of interest. The 2D method proved its suitability in the isolation of vitamins from oil components in the first dimension and the separation and quantification of the analytes in the second dimension thanks to the orthogonal selectivities of phenyl and porous graphitic carbon (PGC) stationary phases. The method was validated following ICH guidelines and possesses an adequate sensitivity to quantify the impurity trans-VitD3 in pharmaceuticals considering the limits imposed by regulatory agencies. The applicability of the phenyl x PGC 2D-LC-UV method to quality control of medicinal products based on VitD3 in olive oil was confirmed by the successful quantification of vitamins in olive oil formulations.

Chromatographic separation by RPLC-ESI-MS of all hydroxyproline isomers for the characterization of collagens from different sources.

During collagen biosynthesis, proline is post-translationally converted to hydroxyproline by specific enzymes. This amino acid, unique to collagen, plays a crucial role in stabilizing the collagen triple helix structure and could serve as an important biomarker for collagen content and quality analysis. Hydroxyproline has four isomers, depending on whether proline is hydroxylated at position 4 or 3 and on whether the cis- or trans- conformation is formed. Moreover, as extensive hydrolysis of collagen is required for its amino acid analysis, epimerization may also occur, although to a lesser extent, giving a total of eight possible isomers. The aim of the present study was to develop a reversed-phase high-performance liquid chromatography-UV-mass spectrometry (RPLC-UV-MS) method for the separation and quantification of all eight hydroxyproline isomers. After the chiral derivatization of the hydroxyproline isomers with Nα-(2,4-dinitro-5-fluorophenyl)-L-valinamide (L-FDVA), to enable their UV detection, the derivatized diastereoisomers were separated by testing different C18 column technologies and morphologies and optimizing operative conditions such as the mobile phase composition (solvent, additives), elution mode, flow rate and temperature. Baseline resolution of all eight isomers was achieved on a HALO® ES-C18 reversed-phase column (150×1.5 mm, 2.7 µm, 160 Å) using isocratic elution and MS-compatible mobile phase. The optimized method was validated for the quantification of hydroxyproline isomers and then applied to different collagen hydrolysates to gain insight and a deeper understanding of hydroxyproline abundances in different species (human, chicken) and sources (native, recombinant).

Effect of glycosylation on the affinity of the MTB protein Ag85B for specific antibodies: towards the design of a dual-acting vaccine against tuberculosis.

BACKGROUND: To create a dual-acting vaccine that can fight against tuberculosis, we combined antigenic arabino-mannan analogues with the Ag85B protein. To start the process, we studied the impact of modifying different parts of the Ag85B protein on its ability to be recognized by antibodies. RESULTS: Through our research, we discovered that three modified versions of the protein, rAg85B-K30R, rAg85B-K282R, and rAg85B-K30R/K282R, retained their antibody reactivity in healthy individuals and those with tuberculosis. To further test the specificity of the sugar AraMan for AraMan antibodies, we used Human Serum Albumin glycosylated with AraMan-IME and Ara3Man-IME. Our findings showed that this specific sugar was fully and specifically modified. Bio-panning experiments revealed that patients with active tuberculosis exhibited a higher antibody response to Ara3Man, a sugar found in lipoarabinomannan (LAM), which is a major component of the mycobacterial cell wall. Bio-panning with anti-LAM plates could eliminate this increased response, suggesting that the enhanced Ara3Man response was primarily driven by antibodies targeting LAM. These findings highlight the importance of Ara3Man as an immunodominant epitope in LAM and support its role in eliciting protective immunity against tuberculosis. Further studies evaluated the effects of glycosylation on the antibody affinity of recombinant Ag85B and its variants. The results indicated that rAg85B-K30R/K282R, when conjugated with Ara3Man-IME, demonstrated enhanced antibody recognition compared to unconjugated or non-glycosylated versions. CONCLUSIONS: Coupling Ara3Man to rAg85B-K30R/K282R could lead to the development of effective dual-acting vaccines against tuberculosis, stimulating protective antibodies against both AraMan and Ag85B, two key tuberculosis antigens.

Silk Fibroin Bioink for 3D Printing in Tissue Regeneration: Controlled Release of MSC extracellular Vesicles.

Sodium alginate (SA)-based hydrogels are often employed as bioink for three-dimensional (3D) scaffold bioprinting. They offer a suitable environment for cell proliferation and differentiation during tissue regeneration and also control the release of growth factors and mesenchymal stem cell secretome, which is useful for scaffold biointegration. However, such hydrogels show poor mechanical properties, fast-release kinetics, and low biological performance, hampering their successful clinical application. In this work, silk fibroin (SF), a protein with excellent biomechanical properties frequently used for controlled drug release, was blended with SA to obtain improved bioink and scaffold properties. Firstly, we produced a printable SA solution containing SF capable of the conformational change from Silk I (random coil) to Silk II (ß-sheet): this transition is a fundamental condition to improve the scaffold's mechanical properties. Then, the SA-SF blends' printability and shape fidelity were demonstrated, and mechanical characterization of the printed hydrogels was performed: SF significantly increased compressive elastic modulus, while no influence on tensile response was detected. Finally, the release profile of Lyosecretome-a freeze-dried formulation of MSC-secretome containing extracellular vesicles (EV)-from scaffolds was determined: SF not only dramatically slowed the EV release rate, but also modified the kinetics and mechanism release with respect to the baseline of SA hydrogel. Overall, these results lay the foundation for the development of SA-SF bioinks with modulable mechanical and EV-release properties, and their application in 3D scaffold printing.

Glycovaccine Design: Optimization of Model and Antitubercular Carrier Glycosylation via Disuccinimidyl Homobifunctional Linker.

Conjugation via disuccinimidyl homobifunctional linkers is reported in the literature as a convenient approach for the synthesis of glycoconjugate vaccines. However, the high tendency for hydrolysis of disuccinimidyl linkers hampers their extensive purification, which unavoidably results in side-reactions and non-pure glycoconjugates. In this paper, conjugation of 3-aminopropyl saccharides via disuccinimidyl glutarate (DSG) was exploited for the synthesis of glycoconjugates. A model protein, ribonuclease A (RNase A), was first considered to set up the conjugation strategy with mono- to tri- mannose saccharides. Through a detailed characterization of synthetized glycoconjugates, purification protocols and conjugation conditions have been revised and optimized with a dual aim: ensure high sugar-loading and avoid the presence of side reaction products. An alternative purification approach based on hydrophilic interaction liquid chromatography (HILIC) allowed the formation of glutaric acid conjugates to be avoided, and a design of experiment (DoE) approach led to optimal glycan loading. Once its suitability was proven, the developed conjugation strategy was applied to the chemical glycosylation of two recombinant antigens, native Ag85B and its variant Ag85B-dm, that are candidate carriers for the development of a novel antitubercular vaccine. Pure glycoconjugates (≥99.5%) were obtained. Altogether, the results suggest that, with an adequate protocol, conjugation via disuccinimidyl linkers can be a valuable approach to produce high sugar-loaded and well-defined glycovaccines.

Effect of mobile phase pH on liquid chromatography retention of mepartricin related compounds and impurities as support to the structural investigation by liquid chromatography-mass spectrometry.

Mepartricin is a semisynthetic polyene macrolide with antifungal and anti-protozoal activities, and it is widely used for the treatment of benign prostatic hyperplasia. Mepartricin is produced by synthetic methyl esterification of the more toxic partricin, and its activity is due to a complex of related compounds. Among them, the main ones are mepartricin B and mepartricin A which are characterized by the presence of a primary and a secondary amine group, respectively. In this work a previously reported HPLC-UV method was properly modified to make it MS-compatible. The selected conditions entail the use of a C18 reverse phase column, and a mobile phase composed by ammonium formate and acetonitrile, with the addition of heptafluorobutyric acid as modifier. The developed method was applied to the characterization of a mepartricin reference standard and a mepartricin experimental batch. All the UV responding peaks, 30 for the standard and 21 for the experimental batch, were successfully detected by MS, allowing to define their m/z values and acquire their fragmentation spectra. For the structural elucidation of isobaric species and, in particular, the identification of toxic partricin-related impurities, the presence of differently ionisable chemical groups was considered, as partricins contain free caboxy-groups, while mepartricins represent their estherified counterparts. A deep study of the effect of mobile phase pH on the chromatographic retention of partricin and mepartricin related compounds was performed in the pH range 2.5-6.5. This study allowed to successfully cluster all the detected species and asses, in the considered batch, the absence of other partricin-related impurities in addition to partricin B and partricin A.

Multi-approach LC-MS methods for the characterization of species-specific attributes of monoclonal antibodies from plants.

In this work, an analytical platform based on the use of chromatography and mass spectrometry (MS), has been applied to the characterization of Rituximab (RTX) obtained from two plant expression systems (rice and tobacco) in comparison to the mammalian cell-derived reference monoclonal antibody (mAb). Different chromatographic approaches, hyphenated to high resolution MS (HRMS), were applied to RTX structural investigation both at middle- and peptide level. In particular, cation exchange chromatography (CEX), size exclusion chromatography (SEC), reversed phase (RPLC) and hydrophilic interaction liquid chromatographic (HILIC) methods were developed and applied on intact mAbs, IdeS-, and trypsin digests in order to address critical attributes such as primary structure, glycan composition, species-related heterogeneity, glycosylation degree, charge variants, aggregation tendency and enzymatic stability. All the collected data highlight the features and criticalities of each production approach. Production in rice results in a heterogeneous but stable product over time, suggesting the absence of proteases in seeds; while tobacco expression system leads to more homogeneous glycosylation, but protein stability seems to be a critical issue probably due to the presence of proteases. This analytical strategy represents a robust support to scientists in the selection and optimization of the best plant expression system to produce recombinant humanized mAbs.

Monolithic Papain-Immobilized Enzyme Reactors for Automated Structural Characterization of Monoclonal Antibodies.

The characterization of monoclonal antibodies (mAbs) requires laborious and time-consuming sample preparation steps before the liquid chromatography-mass spectrometry (LC-MS) analysis. Middle-up approaches entailing the use of specific proteases (papain, IdeS, etc.) emerged as practical and informative methods for mAb characterization. This work reports the development of immobilized enzyme reactors (IMERs) based on papain able to support mAb analytical characterization. Two monolithic IMERs were prepared by the covalent immobilization of papain on different supports, both functionalized via epoxy groups: a Chromolith® WP 300 Epoxy silica column from Merck KGaA and a polymerized high internal phase emulsion (polyHIPE) material synthesized by our research group. The two bioreactors were included in an in-flow system and characterized in terms of immobilization yield, kinetics, activity, and stability using Nα-benzoyl-L-arginine ethyl ester (BAEE) as a standard substrate. Moreover, the two bioreactors were tested toward a standard mAb, namely, rituximab (RTX). An on-line platform for mAb sample preparation and analysis with minimal operator manipulation was developed with both IMERs, allowing to reduce enzyme consumption and to improve repeatability compared to in-batch reactions. The site-specificity of papain was maintained after its immobilization on silica and polyHIPE monolithic supports, and the two IMERs were successfully applied to RTX digestion for its structural characterization by LC-MS. The main pros and cons of the two supports for the present application were described.

Design of epidermal growth factor immobilization on 3D biocompatible scaffolds to promote tissue repair and regeneration.

Exogenous application of human epidermal growth factor (hEGF) stimulates epidermal wound healing. The aim of this study was to develop bioconjugates based on hEGF mimicking the protein in its native state and thus suitable for tissue engineering applications, in particular for treating skin-related disorders as burns. Ribonuclease A (RNase A) was used to investigate a number of different activated-agarose carriers: cyanogen bromide (CNBr)-activated-agarose and glyoxyl-agarose showed to preserve the appropriate orientation of the protein for receptor binding. EGF was immobilized on these carriers and immobilization yield was evaluated (100% and 12%, respectively). A peptide mapping of unbound protein regions was carried out by LC-MS to take evidence of the residues involved in the immobilization and, consequently, the flexibility and surface accessibility of immobilized EGF. To assess cell proliferative activities, 10, 25, 50, and 100 ng/mL of each immobilized EGF sample were seeded on fibroblast cells and incubated for 24, 48 and 72 h. The immobilized growth factor showed significantly high cell proliferative activity at 50 and 100 ng/mL compared to control and soluble EGF. Although both of the immobilized samples show dose-dependency when seeded with high number of fibroblast cells, CNBr-agarose-EGF showed a significantly high activity at 100 ng/mL and 72 h incubation, compared to glyoxyl-agarose-EGF.

Silk Fibroin Nanoparticle Functionalization with Arg-Gly-Asp Cyclopentapeptide Promotes Active Targeting for Tumor Site-Specific Delivery.

Arg-Gly-Asp (RGD)-based cyclopentapeptides (cRGDs) have a high affinity towards integrin αvß3 and αvß5, which are overexpressed by many tumor cells. Here, curcumin-loaded silk fibroin nanoparticles (SFNs) have been functionalized on the surface with cRGD to provide active targeting towards tumor cells; a "click reaction" between the RGD-based cyclopentapeptide carrying an azide group and triple-bond-functionalized nanoparticles has been exploited. Both naked and functionalized SFNs were less than 200 nm in diameter and showed a round-shaped morphology but, after functionalization, SFNs increased in size and protein molecular weight. The functionalization of SFNs' surfaces with cRGD provided active internalization by cells overexpressing integrin receptors. At the lowest concentration tested (0.01 mg/mL), functionalized SFNs showed more effective uptake with respect to the naked by tumor cells that overexpress integrin receptors (but not for non-overexpressing ones). In contrast, at higher concentrations, the non-specific cell membrane protein-particle interactions are promoted and coupled to specific and target mediated uptake. Visual observations by fluorescence microscopy suggested that SFNs bind to integrin receptors on the cell surface and are then internalized by endocytosis. Overall, SFN functionalization provided in vitro active targeting for site-specific delivery of anticancer drugs, boosting activity and sparing healthy organs.

Chromatographic tools for plant-derived recombinant antibodies purification and characterization.

In the last two decades, plants became an interesting alternative for the production of recombinant proteins for human therapy and several antibodies expressed in plants have reached the clinical development stage. Plants are capable of post-translational modifications (PTMs) necessary for protein activity and pharmacokinetics, such as glycosylation. However, there are important kingdom-specific modifications that have to be considered when expressing recombinant proteins. Therefore, there is a need for efficient analytical methods for deep protein characterization starting from the expression platform design until the product approval to guarantee product authenticity, quality and efficacy. Literature lacks of reviews dealing with plant-derived proteins purification and characterization by chromatographic methods, thus the focus of the present review is on this topic for the most representative biotechnological drugs i.e. monoclonal antibodies (mAbs). In the first part, a comprehensive discussion of the methods applied in dowstream processes (extraction and clarification) and a detailed overview of the chromatographic techniques useful for the purification of plant-made mAbs are reported. Among purification techniques, Protein A affinity chromatography, ion-exchange chromatography, hydrophobic interaction chromatography, hydrophobic charge induction chromatography or mixed mode chromatography are described. In the second part, we will discuss analytical platforms based on chromatographic techniques (reverse phase, size exclusion chromatography, ion-exchange chromatography, hydrophilic interaction liquid chromatography) coupled with different detection systems (UV, Fluorescence, MS) used at protein, peptide and glycan level to characterize plant-made mAbs with their unique features.

Chromatographic profiling of silk sericin for biomedical and cosmetic use by complementary hydrophylic, reversed phase and size exclusion chromatographic methods.

Silk sericin (SS) is, together with silk fibroin (SF), one of the two proteins forming the silkworm cocoon. SS is ideal ingredient for cosmetic applications in the formulation of specific products for skin care and hair due to its peculiar physical-chemical composition. SS also showed a great potential in different pharmacological and biotechnological applications, as anticancer drug, anticoagulant, cell culture additive, wound healing agent and drug delivery carrier. Reasons for SS use in biomedical applications derive from its physical-chemical composition. As a consequence, a detailed characterization of SS in terms of average molecular weight, molecular weight distribution and hydro/lipophilic character is crucial to properly address and assess its quality, cosmetic or pharmacological use. In this study, the application of different and complementary chromatographic modes allows a detailed investigation of SS protein isolated from wastewater using two diverse extraction methods. Hydrophilic interaction liquid chromatography (HILIC using an AdvanceBio Glycan Map column) and reverse phase (RP using Symmetry300 C18 column) were applied to intact protein characterization to derive data on protein hydrophilicity and on hydrophobic components of the two SS preparations (SS#1 and SS#2). A higher hydrophilic character of SS#1 was observed by HILIC trace, coherently with the preparation method used, while no significant differences in hydrophobicity were detectable in the RPLC separations. Size distribution was also defined by using a SEC-UV-MS method (using TSKgel SuperSW2000 column) properly optimized to maximize both the size selectivity and the method sensitivity. Taken together, the chromatographic data allowed to better characterize the SS samples obtained by different extraction methods, and the structural properties were correlated to their biological activities.