Quantifying the potential of morphological parameters for human dental identification: part 1-proof of concept.

In forensic identification, lack of eccentric characteristics of intact dentitions hinders correct ante-mortem/post-mortem (AM/PM) matching. It remains unclear which morphological dental parameters hold strong potential as identifiers. This study aimed to establish a method to quantify and rank the identifying potential of one (or a combination of) continuous morphological parameter(s), and to provide a proof of concept. First, a statistic was defined that quantifies the identifying potential: the mean potential set (MPS). The MPS is derived from inter-observer agreement data and it indicates the percentage of subjects in the AM reference dataset who at least need to be considered to detect the correct PM subject. This was calculated in a univariate and a multivariate setting. Second, the method was validated on maxillary first molar crowns of 82 3D-digitally scanned cast models. Standardized measurements were registered using 3D modeling software (3-Matic Medical 12.0, Materialise N.V., Leuven, Belgium): tooth depth, angles between cusps, distances between cusps, distances between the cusps, and the mesial pit. A random sample of 40 first molars was measured by a second examiner. Quantifying and ranking the parameters allowed selecting those with the strongest identifying potential. This was found for the tooth depth (1 measurement, MPS = 17.1%, ICC = 0.879) in the univariate setting, and the angles between cusps (4 measurements, MPS = 3.9%) in the multivariate setting. As expected, the multivariate approach held significantly stronger identifying potential, but more measurements were needed (i.e., more time-consuming). Our method allows quantifying and ranking the potential of dental morphological parameters as identifiers using a clear-cut statistic.

Dental development in patients with agenesis.

AIM: Recent research concerning tooth development and dental agenesis suggests that specific genes are associated with agenesis, and that these genetic factors could also cause delayed dental development of the remaining teeth. The objective of this study was to evaluate whether dental development of patients with agenesis is delayed, compared to a control group. SUBJECTS AND METHOD: Panoramic radiographs of 1145 patients with dental agenesis were collected (452 males, 693 females) aged 6.2 to 24.8 years. The control group included 2032 panoramic radiographs (977 males, 1055 females) aged 6.0 to 24.4 years. A total of 3177 orthopantomograms were staged according to Demirjian. All left permanent teeth present in the mandible (except third molars) were considered. In order to evaluate the difference between patients with and without agenesis, a developmental score (DS) was calculated. The association between the DS and the number of agenetic teeth was evaluated with a Spearman correlation. RESULTS: Based on the DS, patients with agenesis have a delayed development compared to patients in the control group (p < 0.0001). Within the agenesis group, there is a weak relation between the number of agenetic teeth and the DS: the higher the number of teeth with agenesis, the lower the DS (p < 0.0001 and p = 0.06 for females and males, respectively). CONCLUSION: The obtained results can be an important factor for treatment planning in patients with dental agenesis. Moreover, the presence of agenesis needs to be taken into account when using age estimation methods based on permanent tooth development.

Dental age estimation in Malay children based on all permanent teeth types.

The applicability of the Willems et al. model was verified on a collected sample of Malay (Malaysian nationality) children. This sample was split in a reference sample to develop a Malay-specific prediction model based on the Willems et al. method and in a test sample to validate this new developed model. Next, the incorporation of third molars into this model was analyzed. Panoramic radiographs (n = 1,403) of Malay children aged between 4 and 14.99 years (n = 702) and subadults aged between 15 and 23.99 years (n = 701) were collected. The left mandibular seven permanent teeth of the children were scored based on the staging technique described by Demirjian and converted to age using the Willems et al. method. Third molar development of all individuals was staged based on the technique described by Gleiser and Hunt modified by Kohler. Differences between dental age and chronological age were calculated and expressed in mean error (ME), mean absolute error (MAE), and root mean square error (RMSE). The Willems et al. model verified on the collected Malay children overestimated chronological age with a ME around 0.45 year. Small differences in ME, MAE, and RMSE between the verified Malay-specific prediction model and the Willems et al. model were observed. An overall neglected decrease in RMSE was detected adding third molar stages to the developed permanent teeth model.

Human age estimation combining third molar and skeletal development.

The wide prediction intervals obtained with age estimation methods based on third molar development could be reduced by combining these dental observations with age-related skeletal information. Therefore, on cephalometric radiographs, the most accurate age-estimating skeletal variable and related registration method were searched and added to a regression model, with age as response and third molar stages as explanatory variable. In a pilot set up on a dataset of 496 (283 M; 213 F) cephalometric radiographs, the techniques of Baccetti et al. (2005) (BA), Seedat et al. (2005) (SE), Caldas et al. (2007) and Rai et al. (2008) (RA) were verified. In the main study, data from 460 (208 F, 224 M) individuals in an age range between 3 and 26 years, for which at the same day an orthopantogram and a cephalogram were taken, were collected. On the orthopantomograms, the left third molar development was registered using the scoring system described by Gleiser and Hunt (1955) and modified by Köhler (1994) (GH). On the cephalograms, cervical vertebrae development was registered according to the BA and SE techniques. A regression model, with age as response and the GH scores as explanatory variable, was fitted to the data. Next, information of BA, SE and BA + SE was, respectively, added to this model. From all obtained models, the determination coefficients and the root mean squared errors were calculated. Inclusion of information from cephalograms based on the BA, as well as the SE, technique improved the amount of explained variance in age acquired from panoramic radiographs using the GH technique with 48%. Inclusion of cephalometric BA + SE information marginally improved the previous result (+1%). The RMSE decreased with 1.93, 1.85 and 2.03 years by adding, respectively, BA, SE and BA + SE information to the GH model. The SE technique allows clinically the fastest and easiest registration of the degree of development of the cervical vertebrae. Therefore, the choice of technique to classify cervical vertebrae development in addition to third molar development is preferably the SE technique.

Human dental age estimation combining third molar(s) development and tooth morphological age predictors.

In the subadult age group, third molar development, as well as age-related morphological tooth information can be observed on panoramic radiographs. The aim of present study was to combine, in subadults, panoramic radiographic data based on developmental stages of third molar(s) and morphological measurements from permanent teeth, in order to evaluate its added age-predicting performances. In the age range between 15 and 23 years, 25 gender-specific radiographs were collected within each age category of 1 year. Third molar development was classified and registered according the 10-point staging and scoring technique proposed by Gleiser and Hunt (1955), modified by Köhler (1994). The Kvaal (1995) measuring technique was applied on the indicated teeth from the individuals' left side. Linear regression models with age as response and third molar-scored stages as explanatory variables were developed, and morphological measurements from permanent teeth were added. From the models, determination coefficients (R (2)) and root-mean-square errors (RMSE) were calculated. Maximal-added age information was reported as a 6 % R² increase and a 0.10-year decrease of RMSE. Forensic dental age estimations on panoramic radiographic data in the subadult group (15-23 year) should only be based on third molar development.

Human dental age estimation using third molar developmental stages: does a Bayesian approach outperform regression models to discriminate between juveniles and adults?

Dental age estimation methods based on the radiologically detected third molar developmental stages are implemented in forensic age assessments to discriminate between juveniles and adults considering the judgment of young unaccompanied asylum seekers. Accurate and unbiased age estimates combined with appropriate quantified uncertainties are the required properties for accurate forensic reporting. In this study, a subset of 910 individuals uniformly distributed in age between 16 and 22 years was selected from an existing dataset collected by Gunst et al. containing 2,513 panoramic radiographs with known third molar developmental stages of Belgian Caucasian men and women. This subset was randomly split in a training set to develop a classical regression analysis and a Bayesian model for the multivariate distribution of the third molar developmental stages conditional on age and in a test set to assess the performance of both models. The aim of this study was to verify if the Bayesian approach differentiates the age of maturity more precisely and removes the bias, which disadvantages the systematically overestimated young individuals. The Bayesian model offers the discrimination of subjects being older than 18 years more appropriate and produces more meaningful prediction intervals but does not strongly outperform the classical approaches.

A systematic review of odontological sex estimation methods.

BACKGROUND: In human identification sex estimation plays an important role in the search for ante-mortem data. AIM: To systematically review studies describing and testing/validating methods of odontological sex estimation. The set research question was: What odontological sex estimation method is the most accurate? MATERIALS AND METHODS: An electronic search until November 29th 2016 was performed in 5 databases: MEDLINE/PubMed, Cochrane, SciELO, LILACS and Grey literature. The PRISMA guidelines were used. Studies were assessed and included based on the reported data. In particular data criteria were set regarding the considered population, sample size, age range, sex estimation method, type of statistical analysis and study outcome. The extracted data enabled to classify the included studies. Meta-analysis was used to compare the study outcomes per obtained study group. RESULTS: The established search string detected 4720 studies. 103 were considered eligible after review of title, abstract and full-text. The odontological sex estimation methods were classified based on dental metric and non-metric measurements (n=65), cephalometric analysis (n=13), frontal and maxillary sinuses (n=5), cheiloscopy (n=4), palatal features (n=3) and biochemical analysis of teeth (n=13). Teeth measurements for sex estimation were mainly performed on casts (n=34), followed by skeletal remains (n=13), medical imaging (n=5), intraoral measurements/ photography (n=4), and cascades of the above (n=4). CONCLUSION: The variety of published odontological sex estimation methods highlights the importance of sex estimation in human identification. Biochemical analysis of teeth proved to be the most accurate method, but in forensic practice, a need to select the most appropriate evidence based odontological sex estimation method exists.

Uniqueness of the anterior dentition three-dimensionally assessed for forensic bitemark analysis.

The uniqueness of the human dentition (UHD) is an important concept in the comparative process in bitemark analysis. During this analysis, the incisal edges of the suspects' teeth are matched with the bitemarks collected from the victim's body or crime scenes. Despite playing an essential part to exclude suspects, the UHD contained in the involved incisal tooth edges remains an assumption on bitemark level. The present study was aimed, first, to investigate three-dimensionally (3D) the UHD within different quantities of dental material from the incisal edges; second, to test these outcomes in a bidimensional (2D) simulation. Four-hundred forty-five dental casts were collected to compose 4 study groups: I - randomly-selected subjects, II - orthodontically treated subjects, III - twins and IV - orthodontically treated twins. Additionally, 20 dental casts were included to create threshold groups on subjects from whom the dental impressions were taken at 2 different moments (Group V). All the dental casts were digitalized with an automated motion device (XCAD 3D® (XCADCAM Technology®, São Paulo, SP, Brazil). The digital cast files (DCF) were integrated in Geomagic Studio® (3D Systems®, Rock Hill, SC, USA) software package (GS) for cropping, automated superimposition and pair-wise comparisons. All the DCF were cropped remaining 3 mm (part 1), 2 mm (part 2) and 1 mm (part 3) from the incisal edges of the anterior teeth. For a 2D validation, slices of 1 mm, not including incisal edges (part 4), were also cropped. These procedures were repeated in Group V, creating specific thresholds for each of the study parts. The 4 study groups were compared with its respective threshold using ANOVA test with statistical significance of 5%. Groups I, II and III did not differ from the corresponding threshold (Group V) in all study parts (p > 0.05). Scientific evidence to support the UHD was not observed in the current study. Bitemark analysis should not be disregarded but considered carefully when the suspects present similar dental alignment and morphology, such as in orthodontically treated subjects and twins, respectively.

An automated technique to stage lower third molar development on panoramic radiographs for age estimation: a pilot study.

BACKGROUND: Automated methods to evaluate growth of hand and wrist bones on radiographs and magnetic resonance imaging have been developed. They can be applied to estimate age in children and subadults. Automated methods require the software to (1) recognise the region of interest in the image(s), (2) evaluate the degree of development and (3) correlate this to the age of the subject based on a reference population. For age estimation based on third molars an automated method for step (1) has been presented for 3D magnetic resonance imaging and is currently being optimised (Unterpirker et al. 2015). AIM: To develop an automated method for step (2) based on lower third molars on panoramic radiographs. MATERIALS AND METHODS: A modified Demirjian staging technique including ten developmental stages was developed. Twenty panoramic radiographs per stage per gender were retrospectively selected for FDI element 38. Two observers decided in consensus about the stages. When necessary, a third observer acted as a referee to establish the reference stage for the considered third molar. This set of radiographs was used as training data for machine learning algorithms for automated staging. First, image contrast settings were optimised to evaluate the third molar of interest and a rectangular bounding box was placed around it in a standardised way using Adobe Photoshop CC 2017 software. This bounding box indicated the region of interest for the next step. Second, several machine learning algorithms available in MATLAB R2017a software were applied for automated stage recognition. Third, the classification performance was evaluated in a 5-fold cross-validation scenario, using different validation metrics (accuracy, Rank-N recognition rate, mean absolute difference, linear kappa coefficient). RESULTS: Transfer Learning as a type of Deep Learning Convolutional Neural Network approach outperformed all other tested approaches. Mean accuracy equalled 0.51, mean absolute difference was 0.6 stages and mean linearly weighted kappa was 0.82. CONCLUSION: The overall performance of the presented automated pilot technique to stage lower third molar development on panoramic radiographs was similar to staging by human observers. It will be further optimised in future research, since it represents a necessary step to achieve a fully automated dental age estimation method, which to date is not available.

Three-dimensional analysis of the uniqueness of the anterior dentition in orthodontically treated patients and twins.

Dental uniqueness can be proven if no perfect match in pair-wise morphological comparisons of human dentitions is detected. Establishing these comparisons in a worldwide random population is practically unfeasible due to the need for a large and representative sample size. Sample stratification is an option to reduce sample size. The present study investigated the uniqueness of the human dentition in randomly selected subjects (Group 1), orthodontically treated patients (Group 2), twins (Group 3), and orthodontically treated twins (Group 4) in comparison with a threshold control sample of identical dentitions (Group 5). The samples consisted of digital cast files (DCF) obtained through extraoral 3D scanning. A total of 2.013 pair-wise morphological comparisons were performed (Group 1 n=110, Group 2 n=1.711, Group 3 n=172, Group 4 n=10, Group 5 n=10) with Geomagic Studio® (3D Systems®, Rock Hill, SC, USA) software package. Comparisons within groups were performed quantifying the morphological differences between DCF in Euclidean distances. Comparisons between groups were established applying One-way ANOVA. To ensure fair comparisons a post-hoc Power Analysis was performed. ROC analysis was applied to distinguish unique from non-unique dentures. Identical DCF were not detected within the experimental groups (from 1 to 4). The most similar DCF had Euclidian distance of 5.19mm in Group 1, 2.06mm in Group 2, 2.03mm in Group 3, and 1.88mm in Group 4. Groups 2 and 3 were statistically different from Group 5 (p<0.05). Statistically significant difference between Group 4 and 5 revealed to be possible including more pair-wise comparisons in both groups. The ROC analysis revealed sensitivity rate of 80% and specificity between 66.7% and 81.6%. Evidence to sustain the uniqueness of the human dentition in random and stratified populations was observed in the present study. Further studies testing the influence of the quantity of tooth material on morphological difference between dentitions and its impact on uniqueness remain necessary.

Forensic age estimation based on development of third molars: a staging technique for magnetic resonance imaging.

BACKGROUND: The development of third molars can be evaluated with medical imaging to estimate age in subadults. The appearance of third molars on magnetic resonance imaging (MRI) differs greatly from that on radiographs. Therefore a specific staging technique is necessary to classify third molar development on MRI and to apply it for age estimation. AIM: To develop a specific staging technique to register third molar development on MRI and to evaluate its performance for age estimation in subadults. MATERIALS AND METHODS: Using 3T MRI in three planes, all third molars were evaluated in 309 healthy Caucasian participants from 14 to 26 years old. According to the appearance of the developing third molars on MRI, descriptive criteria and schematic representations were established to define a specific staging technique. Two observers, with different levels of experience, staged all third molars independently with the developed technique. Intra- and inter-observer agreement were calculated. The data were imported in a Bayesian model for age estimation as described by Fieuws et al. (2016). This approach adequately handles correlation between age indicators and missing age indicators. It was used to calculate a point estimate and a prediction interval of the estimated age. Observed age minus predicted age was calculated, reflecting the error of the estimate. RESULTS: One-hundred and sixty-six third molars were agenetic. Five percent (51/1096) of upper third molars and 7% (70/1044) of lower third molars were not assessable. Kappa for inter-observer agreement ranged from 0.76 to 0.80. For intra-observer agreement kappa ranged from 0.80 to 0.89. However, two stage differences between observers or between staging sessions occurred in up to 2.2% (20/899) of assessments, probably due to a learning effect. Using the Bayesian model for age estimation, a mean absolute error of 2.0 years in females and 1.7 years in males was obtained. Root mean squared error equalled 2.38 years and 2.06 years respectively. The performance to discern minors from adults was better for males than for females, with specificities of 96% and 73% respectively. CONCLUSION: Age estimations based on the proposed staging method for third molars on MRI showed comparable reproducibility and performance as the established methods based on radiographs.

Three-dimensional validation of the impact of the quantity of teeth or tooth parts on the morphological difference between twin dentitions.

BACKGROUND: The number of teeth involved in cases of bite-mark analysis is generally fewer in comparison to the number of teeth available for cases of dental identification. This decreases the amount of information available and can hamper the distinction between bite suspects. The opposite is true in cases of dental identification and the assumption is that more teeth contribute to a higher degree of specificity and the possibility of identification in these cases. Despite being broadly accepted in forensic dentistry, this hypothesis has never been scientifically tested. OBJECTIVE: The present study aims to assess the impact of the quantity of teeth or tooth parts on morphological differences in twin dentitions. MATERIAL AND METHODS: A sample of 344 dental casts collected from 86 pairs of twins was used. The dental casts were digitized using an automated motion device (XCAD 3D® (XCADCAM Technology®, São Paulo, SP, Brazil) and were imported as three-dimensional dental model images (3D-DMI) in Geomagic Studio® (3D Systems®, Rock Hill, SC, USA) software package. Sub samples were established based on the quantity of teeth and tooth parts studied. Pair wise morphological comparisons between the corresponding twin siblings were established and quantified. RESULTS: Increasing the quantity of teeth and tooth parts resulted in an increase of morphological difference between twin dentitions. More evident differences were observed comparing anterior vs. entire dentitions (p < 0.05) and complete vs. partial anterior dentitions (p < 0.05). CONCLUSION: Dental identifications and bite-mark analysis must include all the possibly related dental information to reach optimal comparison outcomes.

[Laparoscopic fascia closure with the Carter-Thomason instruments]. / Laparoskopischer Fascienverschluss mit dem Instrumentarium nach Carter-Thomason.

An operative technique is described for fasciorrhaphy of large laparoscopic incisions, umbilical hernias or small abdominal wall hernias with laparoscopic monitoring within the scope of minimal invasive surgery. Over a period of 8 months the Carter-Thomason technique was used in 105 operative laparoscopies for occlusion of large laparoscopic incisions and in 6 pre-existing umbilical hernias. In the postoperative period no hernias occurred and no complications were observed.

[Laparoscopic gastric banding using a modified gastric band with loops and a microport system. A report on 25 cases]. / Laparoskopisches "Gastric banding" unter Verwendung eines neuartigen Magenbandes mit Halteösen und Mikroportsystem. Ein Bericht über 25 Fälle.

INTRODUCTION: The laparoscopic application of an adjustable silicone gastric band is an established procedure in the surgical treatment of pathologic adiposity. PATIENTS AND METHODS: Twenty-five patients with morbid obesity underwent the laparoscopic application of a gastric band between November 1998 and June 2000. A modified band (GastroBelt II) was used. RESULTS: Early and late complications were rare in comparison with previous procedures. Complications, which often require surgical intervention, such as slipping of the stomach (8-12%) or pouch dilatation (2-4%), were not observed. The total morbidity rate and mortality rate were both 0%. CONCLUSION: Critical selection of the patients before the operation and appropriate compliance produced an average loss of weight of 7% of the overweight at 6 weeks, 20% at 3 months and 28% at 6 months after the operation. Preconditions for this operation are a coordinated operation team and a clearly defined standardized postoperative care concept.

[Technique in laparoscopic cholecystectomy. Experiences and results in 200 interventions]. / Die Technik der laparoskopischen Cholecystektomie. Erfahrungen und Ergebnisse bei 200 Eingriffen.

This study provides the data and experience of 200 laparoscopic cholecystectomies. The stenosis of the bile duct caused by a ligature in one patient and aberration of the bile duct in two patients led to remarkable intraoperative complications. The average operation time as well as postoperative recovery periods emphasize the importance of laparoscopic cholecystectomy as a relevant alternative to the traditional approach.

[Laparoscopic placement of T-drainage in choledocholithiasis]. / Laparoskopische Plazierung einer T-Drainage bei Choledocholithiasis.

This case report illustrates the feasibility of bile duct revision and T-tube insertion by laparoscopic approach. The procedure largely employs the traditional action. Laparoscopy demands more skill, particularly regarding the suture of the common bile duct, but does not interfere its realisation.

[Laparoscopic suture and knot techniques]. / Laparoskopische Naht- und Knüpftechniken.

Laparoscopic suture and knot techniques are not yet considered standard laparoscopic procedures. In conventional surgery, it would be unthinkable that a procedure would be attempted without a good working knowledge of suture and knot techniques. In laparoscopic operations, limited mobility, the lever arm through the instruments and especially the conversion of 2D vision to 3D actions and the lack of a direct tactile sense all have limiting effect. The needle holders available leave room for improvement. The initially protracted operating times become shorter with training and a period of adjustment.

Ethics in age estimation of unaccompanied minors.

Children absconding from countries of conflict and war are often not able to document their age. When an age is given, it is frequently untraceable or poorly documented and therefore questioned by immigration authorities. Consequently many countries perform age estimations on these children. Provision of ethical practice during the age estimation investigation of unaccompanied minors is considered from different angles: (1) The UN convention on children's rights, formulating specific rights, protection, support, healthcare and education for unaccompanied minors. (2) Since most age estimation investigations are based on medical examination, the four basic principles of biomedical ethics, namely autonomy, beneficence, non-malevolence, justice. (3) The use of medicine for non treatment purposes. (4) How age estimates with highest accuracy in age prediction can be obtained. Ethical practice in age estimation of unaccompanied minors is achieved when different but related aspects are searched, evaluated, weighted in importance and subsequently combined. However this is not always feasible and unanswered questions remain.

Third molar development: measurements versus scores as age predictor.

Human third molar development is widely used to predict chronological age of sub adult individuals with unknown or doubted age. For these predictions, classically, the radiologically observed third molar growth and maturation is registered using a staging and related scoring technique. Measures of lengths and widths of the developing wisdom tooth and its adjacent second molar can be considered as an alternative registration. The aim of this study was to verify relations between mandibular third molar developmental stages or measurements of mandibular second molar and third molars and age. Age related performance of stages and measurements were compared to assess if measurements added information to age predictions from third molar formation stage. The sample was 340 orthopantomograms (170 females, 170 males) of individuals homogenously distributed in age between 7 and 24 years. Mandibular lower right, third and second molars, were staged following Gleiser and Hunt, length and width measurements were registered, and various ratios of these measurements were calculated. Univariable regression models with age as response and third molar stage, measurements and ratios of second and third molars as predictors, were considered. Multivariable regression models assessed if measurements or ratios added information to age prediction from third molar stage. Coefficients of determination (R(2)) and root mean squared errors (RMSE) obtained from all regression models were compared. The univariable regression model using stages as predictor yielded most accurate age predictions (males: R(2) 0.85, RMSE between 0.85 and 1.22 year; females: R(2) 0.77, RMSE between 1.19 and 2.11 year) compared to all models including measurements and ratios. The multivariable regression models indicated that measurements and ratios added no clinical relevant information to the age prediction from third molar stage. Ratios and measurements of second and third molars are less accurate age predictors than stages of developing third molars.

Human third molars development: Comparison of 9 country specific populations.

The majority of age estimation models based on third molar development are constructed on samples from populations with described and outlined origin. Due to unlike research protocols these studies can rarely be compared for the evaluation of possible geographical or ethnical influences on third molar development. The aim of this study is to evaluate country specific third molar development on standardized collected and analyzed data. On panoramic radiographs selected from subjects out of 9 country specific populations (Belgium, China, Japan, Korea, Poland, Thailand, Turkey, Saudi-Arabia and South-India) the four third molar scores were registered, according to a modified Gleiser and Hunt methodology. To obtain for each subject a (factor) score which represents the degree of third molar development, a generalized linear mixed model for multivariate ordinal data was fitted on the repeated third molar scores. Differences between countries are analyzed using gender-specific regression models for these factor scores with age and country as predictors. Comparisons between countries revealed differences in speed and onset of development. However, although reaching statistical significance, differences in actual value were small and not constant over the considered age range. In all countries, at all ages, males were ahead in third molar development compared to females.