RESUMO
BACKGROUND: Electronic (e-) cigarettes are increasingly popular tobacco products on the US market. Traditional tobacco products are known to cause vascular dysfunction, one of the earliest indicators of cardiovascular disease (CVD) development. However, little is known about the effect of regular e-cigarette use on vascular function. The purpose of this study was to investigate the impact of regular e-cigarette use on vascular function and cardiovascular health in young, healthy adults. METHODS: Twenty-one regular users of e-cigarettes (ECU) and twenty-one demographically matched non-users (NU) completed this study. Vascular health was assessed in the cutaneous microcirculation through different reactivity tests to evaluate overall functionality, endothelium-dependent vasodilation (EDD), and endothelium-independent vasodilation (EID). Macrovascular function was assessed using flow-mediated dilation (FMD). RESULTS: Our results suggest that regular users of e-cigarettes present with premature microvascular impairment when compared to non-users. Specifically, they exhibit lower hyperemic (p = 0.003), thermal (p = 0.010), and EDD (p = 0.004) responses. No differences in EID between the groups were identified. We also identified that individuals who use e-cigarettes for longer than 3 years also present with systemic manifestations, as observed by significantly reduced macrovascular (p = 0.002) and microvascular (p ≤ 0.044) function. CONCLUSIONS: Our novel data suggests that young, apparently healthy, regular users of e-cigarettes present with premature vascular dysfunction in the microcirculation when compared to non-users. We have also identified systemic vascular dysfunction affecting both the micro and macrovasculature in those young individuals who used e-cigarettes for longer than 3 years. Taken together, these findings associate regular e-cigarette use with premature vascular dysfunctions and adverse cardiovascular outcomes.
Assuntos
Sistemas Eletrônicos de Liberação de Nicotina , Humanos , Adulto Jovem , Vasodilatação/fisiologia , Endotélio VascularRESUMO
BACKGROUND: Electronic nicotine delivery systems, often referred to as e-cigarettes, are popular tobacco products frequently advertised as safer alternatives to traditional cigarettes despite preliminary data suggesting a potential negative cardiovascular impact. Cardiorespiratory fitness is a critical cardiovascular health marker that is diminished in individuals who consume traditional tobacco products. Whether the use of e-cigarettes impacts cardiorespiratory fitness is currently unknown. Thus, the purpose of this study was to investigate the impact of regular e-cigarette use on cardiorespiratory fitness in young healthy adults. METHODS: Twenty-six users of e-cigarettes (ECU, 13 males, and 13 females; age: 24±3 yr; e-cigarette usage 4±2 yr.) and sixteen demographically matched non-users (NU, 6 males, and 10 females; age: 23±3 yr.) participated in this study. Cardiorespiratory fitness was measured by peak oxygen consumption (VO2peak) during a cardiopulmonary exercise test. Measurements of chronotropic response, hemodynamic, oxygen extraction and utilization were also evaluated. RESULTS: Our results suggest that regular users of e-cigarettes exhibited significantly lower peak oxygen consumption when compared to non-users, even when controlled by fat-free mass and lean body mass. Hemodynamic changes were not different between both groups during exercise, while lower chronotropic responses and skeletal muscle oxygen utilization were observed in users of e-cigarettes. CONCLUSIONS: Results from the present study demonstrate that young, apparently healthy, regular users of e-cigarettes exhibit significantly reduced cardiorespiratory fitness, lower chronotropic response, and impaired skeletal muscle oxygen utilization during exercise. Overall, our findings contribute to the growing body of evidence that supports adverse effects of regular e-cigarette use on cardiovascular health.
RESUMO
A chemical pattern consisting of end-grafted polystyrene brushes (20 nm lines on a 40 nm pitch) on the native oxide of silicon wafers was defined by molecular transfer printing from assembled block co-polymer films. End-grafted hydroxyl-terminated poly(2-vinyl pyridine) brushes were selectively deposited in the interspatial regions. The poly(2-vinyl pyridine) regions selectively sequester acidic HAuCl4 from solution and form arrays of small Au nanoparticles upon exposure to oxygen plasma within the confines of the macromolecular brush layer. This print and fill process to pattern polymer brushes is a generalizable strategy to create functional chemical surface patterns.
Assuntos
Compostos de Ouro/química , Nanopartículas Metálicas/química , Nanoestruturas/química , Nanotecnologia/instrumentação , Nanotecnologia/métodos , Poliestirenos/química , Polivinil/química , Cloretos/química , Ouro/químicaRESUMO
Chemical patterns consisting of poly(2-vinyl pyridine) (P2VP) brushes in a background of a cross-linked polystyrene (PS) mat enabled the highly selective placement of citrate-stabilized Au nanoparticles (NPs) in arrays on surfaces. The cross-linked PS mat prevented the nonspecific binding of Au NPs, and the regions functionalized with P2VP brushes allowed the immobilization of the particles. Isolated chemical patterns of feature sizes from hundreds to tens of nanometers were prepared by standard lithographic techniques. The number of 13 nm Au NPs bound per feature increased linearly with increasing area of the patterns. This behavior is similar to previous reports using 40 nm particles or larger. Arrays of single NPs were obtained by reducing the dimensions of patterned P2VP brushes to below ~20 nm. To generate dense (center-to-center distance = 80 nm) linear chemical patterns for the placement of rows of single NPs, a block-copolymer (BCP)-assisted lithographic process was used. BCPs healed defects associated with the standard lithographic patterning of small dimensions at high densities and led to highly registered, linear, single NP arrays.
Assuntos
Ouro/química , Nanopartículas/química , Polivinil/química , Reagentes de Ligações Cruzadas/síntese química , Reagentes de Ligações Cruzadas/química , Tamanho da Partícula , Poliestirenos/síntese química , Poliestirenos/química , Propriedades de SuperfícieRESUMO
Triazole formation via 1,3-dipolar cycloaddition, or "click" chemistry, is a powerful synthetic method for incorporating chemical functionality onto the surfaces of Au nanoparticles. To investigate the factors that govern azide/alkyne reactivity at particle surfaces, we measured the general kinetic trends for the uncatalyzed reaction using FTIR spectroscopy. This study examines the roles of ligand length, electronic substitution of the alkyne species, and solvent on the reaction under pseudo-first-order conditions. The conversion of azide to triazole is found to depend more strongly on the relative surface coverage of azide terminated alkanethiol than on the ligand length and solvent.
RESUMO
An internal reference method is used for the first time to clearly demonstrate the glass transition temperature (Tg) depression effect in 5 nm thick polystyrene films spin-cast on silicon wafers. Initially flat films exhibit depressed Tg at approximately 85 °C. Temperature-induced dewetting on hexamethyldisilazane-treated silicon substrates leads to formation of discontinuous films with average effective thickness of 15-30 nm. Dewetted films demonstrate Tg close to the bulk value (≈ 100 °C) and are used as internal references. Data both for continuous and discontinuous films are obtained in the same experimental run for the same sample, which allows direct comparison between datasets. Phase-modulated ellipsometry in vacuum is used to monitor glass transition. Both traditional linear temperature scan method and a novel temperature modulated technique have been employed in the measurements.
RESUMO
Glass transition in thin (1-200 nm thick) spin-cast polystyrene films on silicon surfaces is probed by ellipsometry in a controlled vacuum environment. A temperature-modulated modification of the method is used alongside a traditional linear temperature scan. A clear glass transition is detected in films with thicknesses as low as 1-2 nm. The glass transition temperature (T(g)) shows no substantial dependence on thickness for coatings greater than 20 nm. Thinner films demonstrate moderate T(g) depression achieving 18 K for thicknesses 4-7 nm. Less than 4 nm thick samples are excluded from the T(g) comparison due to significant thickness nonuniformity (surface roughness). The transition in 10-20 nm thick films demonstrates excessive broadening. For some samples, the broadened transition is clearly resolved into two separate transitions. The thickness dependence of the glass transition can be well described by a simple 2-layer model. It is also shown that T(g) depression in 5 nm thick films is not sensitive to a wide range of experimental factors including molecular weight characteristics of the polymer, specifications of solvent used for spin casting, substrate composition, and pretreatment of the substrate surface.
Assuntos
Vidro/química , Transição de Fase , Poliestirenos/química , Temperatura , Nitrogênio/química , Oxirredução , Propriedades de Superfície , VácuoRESUMO
The synergy of self- and directed-assembly processes and lithography provides intriguing avenues to fabricate translationally ordered nanoparticle arrangements, but currently lacks the robustness necessary to deliver complex spatial organization. Here, we demonstrate that interparticle spacing and local orientation of gold nanorods (AuNR) can be tuned by controlling the Debye length of AuNR in solution and the dimensions of a chemical contrast pattern. Electrostatic and hydrophobic selectivity for AuNR to absorb to patterned regions of poly(2-vinylpyridine) (P2VP) and polystyrene brushes and mats was demonstrated for AuNR functionalized with mercaptopropane sulfonate (MS) and poly(ethylene glycol), respectively. For P2VP patterns of stripes with widths comparable to the length of the AuNR, single- and double-column arrangements of AuNR oriented parallel and perpendicular to the P2VP line were obtained for MS-AuNR. Furthermore, the spacing of the assembled AuNR was uniform along the stripe and related to the ionic strength of the AuNR dispersion. The different AuNR arrangements are consistent with predictions based on maximization of packing of AuNR within the confined strip.
Assuntos
Ouro/química , Impressão Molecular/métodos , Nanopartículas/química , Nanopartículas/ultraestrutura , Cristalização/métodos , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Reactions of Grignard and organolithium reagents are staple transformations in organic chemistry. However, their use in the chemical functionalization of monolayer-protected metallic nanoparticles is unprecedented. In this letter, we report the reaction of Au nanoparticles bearing a mixed monolayer of alkanethiol ligands that are methyl- and N-methoxy- N-methyl amide-terminated. The latter of these rapidly undergoes reaction with organometallic reagents, achieving high yields (in some cases, nearly quantitative) in only a few hours without the need for high pressure, temperature or catalysts. We assess the feasibility of this reaction with a range of organometallic reagents on the basis of both surface reaction yield and also the stability of the particles (defined as the mass % Au particles recovered vs a control). Demonstrating the utility of these strong organometallic reagents opens the door to a large class of reactions that are underutilized within the field of nanomaterials.