RESUMO
ABSTRACT: Balsalobre-Fernández, C, Xu, J, Jarvis, P, Thompson, S, Tannion, K, and Bishop, C. Validity of a smartphone app using artificial intelligence for the real-time measurement of barbell velocity in the bench press exercise. J Strength Cond Res 37(12): e640-e645, 2023-The purpose of this study was to explore the validity and within-session reliability of the newly developed My Jump Lab application (app), which uses artificial intelligence techniques to monitor barbell velocity in real time. Twenty-seven sport science students performed 5 repetitions at 50 and 75% of their self-reported bench press 1 repetition maximum (1RM) during a single testing session, whereas barbell velocity was concurrently measured using the app (installed on an iPhone 12 Pro) and the GymAware linear position transducer (LPT). A very high correlation was observed between devices at each loading condition (50% 1RM: r = 0.90 [0.82-0.97]; 75% 1RM: r = 0.92 [0.86-0.98]). Results showed trivial differences between the app and LPT at both 50% 1RM (g = -0.06) and 75% 1RM (g = -0.12). Bland-Altman analysis showed a bias estimate of -0.010 m·s-1 and -0.026 m·s-1 for the 50 and 75% 1RM, respectively. Finally, similar levels of reliability, as revealed by the coefficient of variation, were observed for both devices (50% 1RM: LPT = 6.52%, app = 8.17%; 75% 1RM: LPT = 12.10%, app = 13.55%). Collectively, the findings of this study support the use of My Jump Lab for the measurement of real-time barbell velocity in the bench press exercise.
Assuntos
Aplicativos Móveis , Treinamento Resistido , Humanos , Reprodutibilidade dos Testes , Inteligência Artificial , Treinamento Resistido/métodos , Levantamento de Peso , Força MuscularRESUMO
ABSTRACT: Thompson, SW, Lake, JP, Rogerson, D, Ruddock, A, and Barnes, A. Kinetics and kinematics of the free-weight back squat and loaded jump squat. J Strength Cond Res 37(1): 1-8, 2023-The aim of this study was to compare kinetics and kinematics of 2 lower-body free-weight exercises, calculated from concentric and propulsion subphases, across multiple loads. Sixteen strength-trained men performed back squat 1 repetition maximum (1RM) tests (visit 1), followed by 2 incremental back squat and jump squat protocols (visit 2) (loads = 0% and 30-60%, back squat 1RM). Concentric phase and propulsion phase force-time-displacement characteristics were derived from force plate data and compared using analysis of variance and Hedges' g effect sizes. Intrasession reliability was calculated using intraclass correlation coefficient (ICC) and coefficient of variation (CV). All dependent variables met acceptable reliability (ICC >0.7; CV < 10%). Statistically significant 3-way interactions (load × phase × exercise) and 2-way main effects (phase × exercise) were observed for mean force, velocity (30-60% 1RM), power, work, displacement, and duration (0%, 30-50% 1RM) ( p < 0.05). A significant 2-way interaction (load × exercise) was observed for impulse ( p < 0.001). Jump squat velocity ( g = 0.94-3.80), impulse ( g = 1.98-3.21), power ( g = 0.84-2.93), and work ( g = 1.09-3.56) were significantly larger across concentric and propulsion phases, as well as mean propulsion force ( g = 0.30-1.06) performed over all loads ( p < 0.001). No statistically significant differences were observed for mean concentric force. Statistically longer durations ( g = 0.38-1.54) and larger displacements ( g = 2.03-4.40) were evident for all loads and both subphases ( p < 0.05). Ballistic, lower-body exercise produces greater kinetic and kinematic outputs than nonballistic equivalents, irrespective of phase determination. Practitioners should therefore use ballistic methods when prescribing or testing lower-body exercises to maximize athlete's force-time-displacement characteristics.
Assuntos
Treinamento Resistido , Masculino , Humanos , Treinamento Resistido/métodos , Força Muscular , Fenômenos Biomecânicos , Reprodutibilidade dos Testes , PosturaRESUMO
The guidelines are an update and extension of the AAHA Canine Life Stage Guidelines published in 2012. A noteworthy change from the earlier guidelines is the division of the dog's lifespan into five stages (puppy, young adult, mature adult, senior, and end of life) instead of the previous six. This simplified grouping is consistent with how pet owners generally perceive their dog's maturation and aging process and provides a readily understood basis for an evolving, lifelong healthcare strategy. The guidelines provide the following recommendations for managing 10 health-related factors at each of the first four canine life stages: lifestyle effect on the patient's safety, zoonotic and human safety risk, behavior, nutrition, parasite control, vaccination, dental health, reproduction, breed-specific conditions, and a baseline diagnostic profile.
Assuntos
Envelhecimento , Cães/crescimento & desenvolvimento , Hospitais Veterinários/organização & administração , Propriedade , Animais de Estimação , Sociedades Científicas/organização & administração , Criação de Animais Domésticos , Animais , Estados UnidosRESUMO
BACKGROUND: Gray Leaf Spot (GLS causal agents Cercospora zeae-maydis and Cercospora zeina) is one of the most important foliar diseases of maize in all areas where the crop is being cultivated. Although in the USA the situation with GLS severity is not as critical as in sub-Saharan Africa or Brazil, the evidence of climate change, increasing corn monoculture as well as the narrow genetic base of North American resistant germplasm can turn the disease into a serious threat to US corn production. The development of GLS resistant cultivars is one way to control the disease. In this study we combined the high QTL detection power of genetic linkage mapping with the high resolution power of genome-wide association study (GWAS) to precisely dissect QTL controlling GLS resistance and identify closely linked molecular markers for robust marker-assisted selection and trait introgression. RESULTS: Using genetic linkage analysis with a small bi-parental mapping population, we identified four GLS resistance QTL on chromosomes 1, 6, 7, and 8, which were validated by GWAS. GWAS enabled us to dramatically increase the resolution within the confidence intervals of the above-mentioned QTL. Particularly, GWAS revealed that QTLGLSchr8, detected by genetic linkage mapping as a locus with major effect, was likely represented by two QTL with smaller effects. Conducted in parallel, GWAS of days-to-silking demonstrated the co-localization of flowering time QTL with GLS resistance QTL on chromosome 7 indicating that either QTLGLSchr7 is a flowering time QTL or it is a GLS resistance QTL that co-segregates with the latter. As a result, this genetic linkage - GWAS hybrid mapping system enabled us to identify one novel GLS resistance QTL (QTLGLSchr8a) and confirm with more refined positions four more previously mapped QTL (QTLGLSchr1, QTLGLSchr6, QTLGLSchr7, and QTLGLSchr8b). Through the novel Single Donor vs. Elite Panel method we were able to identify within QTL confidence intervals SNP markers that would be suitable for marker-assisted selection of gray leaf spot resistant genotypes containing the above-mentioned GLS resistance QTL. CONCLUSION: The application of a genetic linkage - GWAS hybrid mapping system enabled us to dramatically increase the resolution within the confidence interval of GLS resistance QTL by-passing labor- and time-intensive fine mapping. This method appears to have a great potential to accelerate the pace of QTL mapping projects. It is universal and can be used in the QTL mapping projects in any crops.
Assuntos
Mapeamento Cromossômico , Resistência à Doença/genética , Ligação Genética , Doenças das Plantas/genética , Locos de Características Quantitativas , Zea mays/genética , Cromossomos de Plantas , Marcadores Genéticos , Genoma de Planta , Estudo de Associação Genômica Ampla , Fenótipo , Polimorfismo de Nucleotídeo ÚnicoRESUMO
KEY MESSAGE: We identified a G-nucleotide insertion in a maize FatB responsible for reducing saturated fatty acids through QTL mapping and map-based cloning and developed an allele-specific DNA marker for molecular breeding. Vegetable oils with reduced saturated fatty acids have signficant health benefits. SRS72NE, a Dow AgroSciences proprietory maize inbred line, was found to contain signficantly reduced levels of palmitic acid and total saturated fatty acids in seed oil when compared to other common inbreds. Using F2 and F3 populations derived from a cross between SRS72NE and a normal inbred SLN74, we have demonstrated that the reduced saturated fatty acid phenotype in SRS72NE is controlled by a single QTL on chromosome 9 that explains 79.1 % of palmitic acid and 79.6 % total saturated fatty acid variations. The QTL was mapped to an interval of 105 kb that contains one single gene, a type B fatty acyl-ACP thioesterase (ZmFatB; GRMZM5G829544). ZmFatB alleles from SRS72NE and common inbreds were cloned and sequenced. SRS72NE fatb allele contains a single nucleotide (G) insertion in the 6th exon, which creates a premature stop codon 22 base pairs down stream. As a result, ZmFatB protein from SRS72NE is predicted to contain eight altered and 90 deleted amino acids at its C-terminus. Because the affected region is part of the conserved acyl-ACP thioesterase catalytic domain, the truncated ZmFatB in SRS72NE is likely non-functional. We also show that fatb RNA level in SRS72NE is reduced by 4.4-fold when compared to the normal allele SNL74. A high throughput DNA assay capable of differentiating the normal and reduced saturate fatty acid alleles has been developed and can be used for accelerated molecular breeding.
Assuntos
Óleo de Milho/química , Ácidos Graxos/análise , Regulação da Expressão Gênica de Plantas , Sementes/química , Zea mays/genética , Alelos , Sequência de Aminoácidos , Cruzamento , Mapeamento Cromossômico , Clonagem Molecular , Óleo de Milho/genética , DNA de Plantas/genética , Genótipo , Dados de Sequência Molecular , Fenótipo , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Locos de Características Quantitativas , Sementes/genética , Análise de Sequência de DNA , Tioléster Hidrolases/análise , Zea mays/químicaRESUMO
This paper describes the development and initial results from a secondary ion mass spectrometer coupled with microscope mode detection. Stigmatic ion microscope imaging enables us to decouple the primary ion (PI) beam focus from spatial resolution and is a promising route to attaining higher throughput for mass spectrometry imaging (MSI). Using a commercial C60+ PI beam source, we can defocus the PI beam to give uniform intensity across a 2.5 mm2 area. By coupling the beam with a position-sensitive spatial detector, we can achieve mass spectral imaging of positive and negative secondary ions (SIs), which we demonstrate using samples comprising metals and dyes. Our approach involves simultaneous desorption of ions across a large field of view, enabling mass spectral images to be recorded over an area of 2.5 mm2 in a matter of seconds. Our instrument can distinguish spatial features with a resolution of better than 20 µm, and has a mass resolution of >500 at 500 u. There is considerable scope to improve this, and through simulations we estimate the future performance of the instrument.
RESUMO
Maize brown midrib1 (bm1) mutant plants have reduced lignin content and offer significant advantages when used in silage and biofuel applications. Cinnamyl alcohol dehydrogenase (CAD) catalyzes the conversion of hydroxycinnamyl aldehydes to monolignols, a key step in lignin biosynthesis. Maize CAD2 has been implicated as the underlying gene for bm1 phenotypes since bm1 plants have reduced CAD activity and lower CAD2 transcript level. Here, we describe a Dow AgroSciences maize bm1 mutant (bm1-das1) that contains a 3,444-bp transposon insertion in the first intron of CAD2 gene. As a result of chimeric RNA splicing, cad2 mRNA from bm1-das1 contains a 409-bp insert between its 1st and 2nd exons. This insertion creates a premature stop codon and is predicted to result in a truncated protein of 48 amino acids (AA), compared to 367 AA for the wild type (WT) CAD2. We have also sequenced cad2 from the reference allele bm1-ref in 515D bm1 stock and showed that it contains a two-nucleotide (AC) insertion in the 3rd exon, which is predicted to result in a truncated protein of 147 AA. The levels of cad2 mRNA in the midribs of bm1-das1 and bm1-ref are reduced by 91 and 86 % respectively, leading to reductions in total lignin contents by 24 and 30 %. Taken together, our data show that mutations in maize CAD2 are responsible for maize bm1 phenotypes. Based on specific changes in bm1-das1 and bm1-ref, high throughput TaqMan and KBioscience's allele specific PCR assays capable of differentiating mutant and WT alleles have been developed to accelerate bm1 molecular breeding.
Assuntos
Oxirredutases do Álcool/genética , Regulação Enzimológica da Expressão Gênica/genética , Lignina/metabolismo , Zea mays/enzimologia , Zea mays/genética , Oxirredutases do Álcool/metabolismo , Alelos , Sequência de Bases , Clonagem Molecular , Códon sem Sentido , DNA de Plantas/química , DNA de Plantas/genética , Mutação da Fase de Leitura , Regulação da Expressão Gênica de Plantas , Lignina/análise , Dados de Sequência Molecular , Mutagênese Insercional , Mutação , Fenótipo , Folhas de Planta/química , Folhas de Planta/enzimologia , Folhas de Planta/genética , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Caules de Planta/química , Caules de Planta/enzimologia , Caules de Planta/genética , RNA Mensageiro/genética , RNA de Plantas/genética , Zea mays/químicaRESUMO
BACKGROUND: Clinical data are collected for routine care in family practice; there are also a growing number of genetic and cancer registry data repositories. The Translational Research and Patient Safety in Europe (TRANSFoRm) project seeks to facilitate research using linked data from more than one source. We performed a requirements analysis which identified a wide range of data and business process requirements that need to be met before linking primary care and either genetic or disease registry data. OBJECTIVES: To develop a survey to assess the readiness of data repositories to participate in linked research - the Transform International Research Readiness (TIRRE) survey. METHOD: We develop the questionnaire based on our requirement analysis; with questions at micro-, meso- and macro levels of granularity, study-specific questions about diabetes and gastro-oesophageal reflux disease (GORD), and research track record. The scope of the data required was extensive. We piloted this instrument, conducting ten preliminary telephone interviews to evaluate the response to the questionnaire. RESULTS: Using feedback gained from these interviews we revised the questionnaire; clarifying questions that were difficult to answer and utilising skip logic to create different series of questions for the various types of data repository. We simplified the questionnaire replacing free-text responses with yes/no or picking list options, wherever possible. We placed the final questionnaire online and encouraged its use (www.clininf.eu/jointirre/info.html). CONCLUSION: Limited field testing suggests that TIRRE is capable of collecting comprehensive and relevant data about the suitability and readiness of data repositories to participate in linked data research.
Assuntos
Registro Médico Coordenado , Sistemas Computadorizados de Registros Médicos , Atenção Primária à Saúde , Inquéritos e Questionários , Pesquisa Translacional Biomédica , Coleta de Dados , Bases de Dados Genéticas , Europa (Continente) , Humanos , Entrevistas como Assunto , Sistema de Registros , Projetos de PesquisaRESUMO
Guidelines are offered to guide the veterinary practitioner in designing a comprehensive, individualized wellness plan for each stage of a dog's life. Life stages are defined by both age and breed characteristics for practical purposes. Each patient visit should use an individualized approach to patient handling, preventive care, and early disease detection. Environment, behavior, nutrition, parasite control, vaccinations, dental care, zoonotic disease control, safety, and reproductive health should be addressed.
Assuntos
Bem-Estar do Animal , Cães/crescimento & desenvolvimento , Linhagem , Guias de Prática Clínica como Assunto , Medicina Veterinária/normas , Fatores Etários , Criação de Animais Domésticos/normas , Fenômenos Fisiológicos da Nutrição Animal/fisiologia , Animais , Comportamento Animal , Reservatórios de Doenças/veterinária , Doenças do Cão/epidemiologia , Doenças do Cão/prevenção & controle , Cães/fisiologia , Feminino , Masculino , Saúde Bucal , Estados UnidosRESUMO
Centrifugation is performed on whole blood samples to obtain serum or plasma for biochemical analysis. Although blood samples centrifuged in a microhematocrit tube may maximize recovery of plasma from small-volume samples, plasma biochemical values from such samples have been implicated as causing erroneous results. To compare blood biochemical values obtained by microhematocrit centrifugation and centrifugation with a commercial tilt-rotor machine, blood samples were collected from peregrine falcon (Falco peregrinus) eyases aged 32-40 days (n=51). The samples were separated into 2 equal aliquots with 1 aliquot centrifuged in a tilt-rotor machine and the other aliquot ultracentrifuged in microhematocrit tubes. Separated plasma from both processes was sent to a commercial veterinary reference laboratory for routine clinical biochemical analysis. No significant differences were found in the biochemical results of the paired samples by the 2 centrifugation methods. These results show that the centrifugation method has no effect on the plasma quality for biochemical analysis in young peregrine falcons.
Assuntos
Falconiformes/sangue , Ultracentrifugação/veterinária , Envelhecimento , Animais , IllinoisRESUMO
A Time of flight (ToF) mass spectrometer suitable in terms of sensitivity, detector response and time resolution, for application in fast transient Temporal Analysis of Products (TAP) kinetic catalyst characterization is reported. Technical difficulties associated with such application as well as the solutions implemented in terms of adaptations of the ToF apparatus are discussed. The performance of the ToF was validated and the full linearity of the specific detector over the full dynamic range was explored in order to ensure its applicability for the TAP application. The reported TAP-ToF setup is the first system that achieves the high level of sensitivity allowing monitoring of the full 0-200 AMU range simultaneously with sub-millisecond time resolution. In this new setup, the high sensitivity allows the use of low intensity pulses ensuring that transport through the reactor occurs in the Knudsen diffusion regime and that the data can, therefore, be fully analysed using the reported theoretical TAP models and data processing.
RESUMO
The study aim was to compare different predictive models in one repetition maximum (1RM) estimation from load-velocity profile (LVP) data. Fourteen strength-trained men underwent initial 1RMs in the free-weight back squat, followed by two LVPs, over three sessions. Profiles were constructed via a combined method (jump squat (0 load, 30-60% 1RM) + back squat (70-100% 1RM)) or back squat only (0 load, 30-100% 1RM) in 10% increments. Quadratic and linear regression modeling was applied to the data to estimate 80% 1RM (kg) using 80% 1RM mean velocity identified in LVP one as the reference point, with load (kg), then extrapolated to predict 1RM. The 1RM prediction was based on LVP two data and analyzed via analysis of variance, effect size (g/ηp2), Pearson correlation coefficients (r), paired t-tests, standard error of the estimate (SEE), and limits of agreement (LOA). p < 0.05. All models reported systematic bias < 10 kg, r > 0.97, and SEE < 5 kg, however, all linear models were significantly different from measured 1RM (p = 0.015 <0.001). Significant differences were observed between quadratic and linear models for combined (p < 0.001; ηp2 = 0.90) and back squat (p = 0.004, ηp2 = 0.35) methods. Significant differences were observed between exercises when applying linear modeling (p < 0.001, ηp2 = 0.67-0.80), but not quadratic (p = 0.632-0.929, ηp2 = 0.001-0.18). Quadratic modeling employing the combined method rendered the greatest predictive validity. Practitioners should therefore utilize this method when looking to predict daily 1RMs as a means of load autoregulation.
RESUMO
PURPOSE: This study compared pooled against individualized load-velocity profiles (LVPs) in the free-weight back squat and power clean. METHODS: A total of 10 competitive weightlifters completed baseline 1-repetition maximum assessments in the back squat and power clean. Three incremental LVPs were completed, separated by 48 to 72 hours. Mean and peak velocity were measured via a linear-position transducer (GymAware). Linear and nonlinear (second-order polynomial) regression models were applied to all pooled and individualized LVP data. A combination of coefficient of variation (CV), intraclass correlation coefficient, typical error of measurement, and limits of agreement assessed between-subject variability and within-subject reliability. Acceptable reliability was defined a priori as intraclass correlation coefficient > .7 and CV < 10%. RESULTS: Very high to practically perfect inverse relationships were evident in the back squat (r = .83-.96) and power clean (r = .83-.89) for both regression models; however, stronger correlations were observed in the individualized LVPs for both exercises (r = .85-.99). Between-subject variability was moderate to large across all relative loads in the back squat (CV = 8.2%-27.8%) but smaller in the power clean (CV = 4.6%-8.5%). The power clean met our criteria for acceptable reliability across all relative loads; however, the back squat revealed large CVs in loads ≥90% of 1-repetition maximum (13.1%-20.5%). CONCLUSIONS: Evidently, load-velocity characteristics are highly individualized, with acceptable levels of reliability observed in the power clean but not in the back squat (≥90% of 1-repetition maximum). If practitioners want to adopt load-velocity profiling as part of their testing and monitoring procedures, an individualized LVP should be utilized over pooled LVPs.
Assuntos
Treinamento Resistido , Exercício Físico , Humanos , Força Muscular , Postura , Reprodutibilidade dos Testes , Levantamento de PesoRESUMO
BACKGROUND: Advances in smartphone technology have facilitated an increase in the number of commercially available smartphone and tablet apps that enable the collection of physiological and biomechanical variables typically monitored in sport and exercise settings. Currently, it is not fully understood whether individuals collect data using mobile devices and tablets, independent of additional hardware, in their practice. OBJECTIVE: This study aims to explore the use of smartphone and tablet software apps to collect data by individuals working in various sport and exercise settings, such as sports coaching, strength and conditioning, and personal training. METHODS: A total of 335 practitioners completed an electronic questionnaire that surveyed their current training practices, with a focus on 2 areas: type of data collection and perceptions of reliability and validity regarding app use. An 18-item questionnaire, using a 5-point Likert scale, evaluated the perception of app use. RESULTS: A total of 204 respondents reported using apps to directly collect data, with most of them (196/335, 58.5%) collecting biomechanical data, and 41.2% (138/335) respondents reported using at least one evidence-based app. A binomial general linear model determined that evidence accessibility (ß=.35, 95% CI 0.04-0.67; P=.03) was significantly related to evidence-based app use. Age (ß=-.03, 95% CI -0.06 to 0.00; P=.03) had a significant negative effect on evidence-based app use. CONCLUSIONS: This study demonstrates that practitioners show a greater preference for using smartphones and tablet devices to collect biomechanical data such as sprint velocity and jump performance variables. When it is easier to access information on the quality of apps, practitioners are more likely to use evidence-based apps. App developers should seek independent research to validate their apps. In addition, app developers should seek to provide clear signposting to the scientific support of their software in alternative ways.
Assuntos
Aplicativos Móveis , Smartphone , Computadores de Mão , Estudos Transversais , Humanos , Reprodutibilidade dos TestesRESUMO
BACKGROUND: Optimal prescription of resistance exercise load (kg) is essential for the development of maximal strength. Two methods are commonly used in practice with no clear consensus on the most effective approach for the improvement of maximal strength. OBJECTIVE: The primary aim of this review was to compare the effectiveness of percentage 1RM (% 1RM) and repetition maximum targets (RM) as load prescription methods for the development of maximal strength. METHODS: Electronic database searches of MEDLINE, SPORTDiscus, Scopus, and CINAHL Complete were conducted in accordance with PRISMA guidelines. Studies were eligible for inclusion if a direct measure of maximal strength was used, a non-training control group was a comparator, the training intervention was > 4 weeks in duration and was replicable, and participants were defined as healthy and between the ages of 18-40. Methodological quality of the studies was evaluated using a modified Downs and Black checklist. Percentage change (%) and 95% confidence intervals (CI) for all strength-based training groups were calculated. Statistical significance (p < 0.05) was reported from each study. RESULTS: Twenty-two studies comprising a total of 761 participants (585 males and 176 females) were found to meet the inclusion criteria. 12 studies were returned for % 1RM, with 10 for RM. All studies showed statistically significant improvements in maximal strength in the training groups (31.3 ± 21.9%; 95% CI 33.1-29.5%). The mean quality rating for all studies was 17.7 ± 2.3. Four studies achieved a good methodological rating, with the remainder classified as moderate. CONCLUSIONS: Both % 1RM and RM are effective tools for improving maximal strength. % 1RM appears to be a better prescriptive method than RM potentially due to a more sophisticated management of residual fatigue. However, large heterogeneity was present within this data. Lower body and multi-joint exercises appear to be more appropriate for developing maximal strength. Greater consensus is required in defining optimal training prescriptions, physiological adaptations, and training status.
Assuntos
Força Muscular , Músculo Esquelético/fisiologia , Treinamento Resistido , Adaptação Fisiológica , Humanos , Carga de TrabalhoRESUMO
While typesetting the entries of the Table 1 were incorrectly aligned. The correct Table 1 has been copied below.
RESUMO
This study investigated the inter-day and intra-device reliability, and criterion validity of six devices for measuring barbell velocity in the free-weight back squat and power clean. In total, 10 competitive weightlifters completed an initial one repetition maximum (1RM) assessment followed by three load-velocity profiles (40-100% 1RM) in both exercises on four separate occasions. Mean and peak velocity was measured simultaneously on each device and compared to 3D motion capture for all repetitions. Reliability was assessed via coefficient of variation (CV) and typical error (TE). Least products regression (LPR) (R2) and limits of agreement (LOA) assessed the validity of the devices. The Gymaware was the most reliable for both exercises (CV < 10%; TE < 0.11 m·s-1, except 100% 1RM (mean velocity) and 90â100% 1RM (peak velocity)), with MyLift and PUSH following a similar trend. Poorer reliability was observed for Beast Sensor and Bar Sensei (CV = 5.1%â119.9%; TE = 0.08â0.48 m·s-1). The Gymaware was the most valid device, with small systematic bias and no proportional or fixed bias evident across both exercises (R2 > 0.42-0.99 LOA = -0.03-0.03 m·s-1). Comparable validity data was observed for MyLift in the back squat. Both PUSH devices produced some fixed and proportional bias, with Beast Sensor and Bar Sensei being the least valid devices across both exercises (R2 > 0.00-0.96, LOA = -0.36â0.46 m·s-1). Linear position transducers and smartphone applications could be used to obtain velocity-based data, with inertial measurement units demonstrating poorer reliability and validity.
RESUMO
A time-of-flight microscope imaging mass spectrometer incorporating a reflectron was used to image mass-resolved ions generated from a 270 µm diameter surface. Mass and spatial resolutions of 8100 ± 700 m/Δm and 18 µm ± 6 µm, respectively, were obtained simultaneously by using pulsed extraction differential acceleration ion optical focusing to create a pseudo-source plane for a single-stage gridless reflectron. The obtainable mass resolution was limited only by the response time of the position-sensitive detector and, according to simulations, could potentially reach 30 200 ± 2900 m/Δm. The spatial resolution can be further improved at the expense of the mass resolution to at least 6 µm by increasing the applied extraction field. An event-triggered fast imaging sensor was additionally used to record ion images for each time-of-flight peak resolved during an experimental cycle, demonstrating the high-throughput capability of the instrument.
RESUMO
PURPOSE: To compare kinetic and kinematic data from 3 different velocity-based training sessions and a 1-repetition-maximum (1RM)-percent-based training (PBT) session using full-depth, free-weight back squats with maximal concentric effort. METHODS: Fifteen strength-trained men performed 4 randomized resistance-training sessions 96 h apart: PBT session involved 5 sets of 5 repetitions using 80% 1RM; load-velocity profile (LVP) session contained 5 sets of 5 repetitions with a load that could be adjusted to achieve a target velocity established from an individualized LVP equation at 80% 1RM; fixed sets 20% velocity loss threshold (FSVL20) session consisted of 5 sets at 80% 1RM, but sets were terminated once the mean velocity (MV) dropped below 20% of the threshold velocity or when 5 repetitions were completed per set; and variable sets 20% velocity loss threshold session comprised 25 repetitions in total, but participants performed as many repetitions in a set as possible until the 20% velocity loss threshold was exceeded. RESULTS: When averaged across all repetitions, MV and peak velocity (PV) were significantly (P < .05) faster during the LVP (MV effect size [ES] = 1.05; PV ES = 1.12) and FSVL20 (MV ES = 0.81; PV ES = 0.98) sessions compared with PBT. Mean time under tension (TUT) and concentric TUT were significantly less during the LVP sessions compared with PBT. The FSVL20 sessions had significantly less repetitions, total TUT, and concentric TUT than PBT. No significant differences were found for all other measurements between any of the sessions. CONCLUSIONS: Velocity-based training permits faster velocities and avoids additional unnecessary mechanical stress but maintains similar measures of force and power output compared with strength-oriented PBT in a single training session.
Assuntos
Força Muscular , Músculo Esquelético/fisiologia , Treinamento Resistido/métodos , Adulto , Fenômenos Biomecânicos , Estudos Cross-Over , Humanos , Cinética , Masculino , Estresse Mecânico , Adulto JovemRESUMO
Understanding tissue structure and function requires tools that quantify the expression of multiple proteins while preserving spatial information. Here, we describe MIBI-TOF (multiplexed ion beam imaging by time of flight), an instrument that uses bright ion sources and orthogonal time-of-flight mass spectrometry to image metal-tagged antibodies at subcellular resolution in clinical tissue sections. We demonstrate quantitative, full periodic table coverage across a five-log dynamic range, imaging 36 labeled antibodies simultaneously with histochemical stains and endogenous elements. We image fields of view up to 800 µm × 800 µm at resolutions down to 260 nm with sensitivities approaching single-molecule detection. We leverage these properties to interrogate intrapatient heterogeneity in tumor organization in triple-negative breast cancer, revealing regional variability in tumor cell phenotypes in contrast to a structured immune response. Given its versatility and sample back-compatibility, MIBI-TOF is positioned to leverage existing annotated, archival tissue cohorts to explore emerging questions in cancer, immunology, and neurobiology.