A Quantitative Re-Assessment of Microencapsulation in (Pre-Treated) Yeast.

Most hydrophobes easily diffuse into yeast cells, where they experience reduced evaporation and protection from oxidation, thus allowing inherently biocompatible encapsulation processes. Despite a long-standing industrial interest, the effect of parameters such as how is yeast pre-treated (extraction with ethanol, plasmolysis with hypertonic NaCl, depletion to cell walls), the polarity of the hydrophobes and the process conditions are still not fully understood. Here, we have developed thorough analytical protocols to assess how the effects of the above on S. cerevisiae's morphology, permeability, and encapsulation efficiency, using three differently polar hydrophobes (linalool, 1,6-dihydrocarvone, limonene) and three separate processes (hydrophobes as pure 'oils', water dispersions, or acetone solutions). The harsher the pre-treatment (depleted > plasmolyzed/extracted > untreated cells), the easier the diffusion into yeast became, and the lower both encapsulation efficiency and protection from evaporation, possibly due to denaturation/removal of lipid-associated (membrane) proteins. More hydrophobic terpenes performed worst in encapsulation as pure 'oils' or in water dispersion, but much less of a difference existed in acetone. This indicates the specific advantage of solvents/dispersants for 'difficult' compounds, which was confirmed by principal component analysis; furthering this concept, we have used combinations of hydrophobes (e.g., linalool and α-tocopherol), with one acting as solvent/enhancer for the other. Our results thus indicate advantages in using untreated yeast and-if necessary-processes based on solvents/secondary hydrophobes.

Dual Thermal- and Oxidation-Responsive Polymers Synthesized by a Sequential ROP-to-RAFT Procedure Inherently Temper Neuroinflammation.

This study is about multiple responsiveness in biomedical materials. This typically implies "orthogonality" (i.e., one response does not affect the other) or synergy (i.e., one increases efficacy or selectivity of the other), but an antagonist effect between responses may also occur. Here, we describe a family of very well-defined amphiphilic and micelle-forming block copolymers, which show both oxidative and temperature responses. They are produced via successive anionic ring-opening polymerization of episulfides and RAFT polymerization of dialkylacrylamides and differ only in the ratio between inert (N,N-dimethylacrylamide, DMA) and temperature-sensitive (N,N-diethylacrylamide, DEA) units. By scavenging Reactive Oxygen Species (ROS), these polymers are anti-inflammatory; through temperature responsiveness, they can macroscopically aggregate, which may allow them to form depots upon injection. The localization of the anti-inflammatory action is an example of synergy. An extensive evaluation of toxicity and anti-inflammatory effects on in vitro models, including BV2 microglia, C8D30 astrocytes and primary neurons, shows a link between capacity of aggregation and detrimental effects on viability which, albeit mild, can hinder the anti-inflammatory potential (antagonist action). Although limited in breadth (e.g., only in vitro models and only DEA as a temperature-responsive unit), this study suggests that single-responsive controls should be used to allow for a precise assessment of the (synergic or antagonist) potential of double-responsive systems.

Lignin, the Lignification Process, and Advanced, Lignin-Based Materials.

At a time when environmental considerations are increasingly pushing for the application of circular economy concepts in materials science, lignin stands out as an under-used but promising and environmentally benign building block. This review focuses (A) on understanding what we mean with lignin, i.e., where it can be found and how it is produced in plants, devoting particular attention to the identity of lignols (including ferulates that are instrumental for integrating lignin with cell wall polysaccharides) and to the details of their coupling reactions and (B) on providing an overview how lignin can actually be employed as a component of materials in healthcare and energy applications, finally paying specific attention to the use of lignin in the development of organic shape-memory materials.

A Reactive Oxygen Species-Scavenging 'Stealth' Polymer, Poly(thioglycidyl glycerol), Outperforms Poly(ethylene glycol) in Protein Conjugates and Nanocarriers and Enhances Protein Stability to Environmental and Biological Stressors.

This study addresses well-known shortcomings of poly(ethylene glycol) (PEG)-based conjugates. PEGylation is by far the most common method employed to overcome immunogenicity and suboptimal pharmacokinetics of, for example, therapeutic proteins but has significant drawbacks. First, PEG offers no protection from denaturation during lyophilization, storage, or oxidation (e.g., by biological oxidants, reactive oxygen species); second, PEG's inherent immunogenicity, leading to hypersensitivity and accelerated blood clearance (ABC), is a growing concern. We have here developed an 'active-stealth' polymer, poly(thioglycidyl glycerol)(PTGG), which in human plasma is less immunogenic than PEG (35% less complement activation) and features a reactive oxygen species-scavenging and anti-inflammatory action (∼50% less TNF-α in LPS-stimulated macrophages at only 0.1 mg/mL). PTGG was conjugated to proteins via a one-pot process; molar mass- and grafting density-matched PTGG-lysozyme conjugates were superior to their PEG analogues in terms of enzyme activity and stability against freeze-drying or oxidation; the latter is due to sacrificial oxidation of methionine-mimetic PTGG chains. Both in mice and rats, PTGG-ovalbumin displayed circulation half-lives up to twice as long as PEG-ovalbumin, but most importantly─and differently from PEG─without any associated ABC effect seen either in the time dependency of blood concentration, in the liver/splenic accumulation, or in antipolymer IgM/IgG titers. Furthermore, similar pharmacokinetic results were obtained with PTGGylated/PEGylated liposomal nanocarriers. PTGG's 'active-stealth' character therefore makes it a highly promising alternative to PEG for conjugation to biologics or nanocarriers.

The Mechanistic Understanding of RAD51 Defibrillation: A Critical Step in BRCA2-Mediated DNA Repair by Homologous Recombination.

The cytotoxic action of anticancer drugs can be potentiated by inhibiting DNA repair mechanisms. RAD51 is a crucial protein for genomic stability due to its critical role in the homologous recombination (HR) pathway. BRCA2 assists RAD51 fibrillation and defibrillation in the cytoplasm and nucleus and assists its nuclear transport. BRC4 is a peptide derived from the fourth BRC repeat of BRCA2, and it lacks the nuclear localization sequence. Here, we used BRC4 to (i) reverse RAD51 fibrillation; (ii) avoid the nuclear transport of RAD51; and (iii) inhibit HR and enhance the efficacy of chemotherapeutic treatments. Specifically, using static and dynamic light scattering, transmission electron microscopy, and microscale thermophoresis, we show that BRC4 eroded RAD51 fibrils from their termini through a "domino" mechanism and yielded monomeric RAD51 with a cumulative nanomolar affinity. Using cellular assays (BxPC-3, pancreatic cancer), we show that a myristoylated BRC4 (designed for a more efficient cell entry) abolished the formation of nuclear RAD51 foci. The present study provides a molecular description of RAD51 defibrillation, an essential step in BRCA2-mediated homologous recombination and DNA repair.

Yeast Cells in Microencapsulation. General Features and Controlling Factors of the Encapsulation Process.

Besides their best-known uses in the food and fermentation industry, yeasts have also found application as microcapsules. In the encapsulation process, exogenous and most typically hydrophobic compounds diffuse and end up being passively entrapped in the cell body, and can be released upon application of appropriate stimuli. Yeast cells can be employed either living or dead, intact, permeabilized, or even emptied of all their original cytoplasmic contents. The main selling points of this set of encapsulation technologies, which to date has predominantly targeted food and-to a lesser extent-pharmaceutical applications, are the low cost, biodegradability and biocompatibility of the capsules, coupled to their sustainable origin (e.g., spent yeast from brewing). This review aims to provide a broad overview of the different kinds of yeast-based microcapsules and of the main physico-chemical characteristics that control the encapsulation process and its efficiency.

"Tandem" Nanomedicine Approach against Osteoclastogenesis: Polysulfide Micelles Synergically Scavenge ROS and Release Rapamycin.

We show the first example of a synergic approach of oxidant (ROS) scavenging carrier and ROS-responsive drug release in the context of a potential therapy against osteoporosis, aiming to inhibit the differentiation of inflammatory cells into osteoclasts. In our "tandem" approach, a branched amphiphilic, PEGylated polysulfide (PPSES-PEG) was preferred over a linear analogue, because of improved homogeneity in the aggregates (spherical micelles vs mixture of wormlike and spherical), increased stability, and higher drug loading (up to ∼22 wt % of antiosteoclastic rapamycin). These effects are ascribed to the branching inhibiting crystallization in the polysulfide blocks. The ROS-scavenging micelles alone were already able to reduce osteoclastogenesis in a RAW 264.7 model, but the "drug" combination (the polymer itself + rapamycin released only under oxidation) completely abrogated the process. An important take-home message is that the synergic performance depended very strongly on the oxidant:oxidizable group molar ratio, a parameter to carefully tune in the perspective of targeting specific diseases.

Evaluating the Efficiency of Hyaluronic Acid for Tumor Targeting via CD44.

The development of delivery systems capable of tumor targeting represents a promising strategy to overcome issues related to nonspecific effects of conventional anticancer therapies. Currently, one of the most investigated agents for cancer targeting is hyaluronic acid (HA), since its receptor, CD44, is overexpressed in many cancers. However, most of the studies on CD44/HA interaction have been so far performed in cell-free or genetically modified systems, thus leaving some uncertainty regarding which cell-related factors influence HA binding and internalization (collectively called "uptake") into CD44-expressing cells. To address this, the expression of CD44 (both standard and variants, designated CD44s and CD44v, respectively) was evaluated in human dermal fibroblasts (HDFs) and a large panel of cancer cell lines, including breast, prostate, head and neck, pancreatic, ovarian, colorectal, thyroid, and endometrial cancers. Results showed that CD44 isoform profiles and expression levels vary across the cancer cell lines and HDF and are not consistent within the cell origin. Using composite information of CD44 expression, HA binding, and internalization, we found that the expression of CD44v can negatively influence the uptake of HA, and, instead, when cells primarily expressed CD44s, a positive correlation was observed between expression and uptake. In other words, CD44shigh cells bound and internalized more HA compared to CD44slow cells. Moreover, CD44shigh HDFs were less efficient in uptaking HA compared to CD44shigh cancer cells. The experiments described here are the first step toward understanding the interplay between CD44 expression, its functionality, and the underlying mechanism(s) for HA uptake. The results show that factors other than the amount of CD44 receptor can play a role in the interaction with HA, and this represents an important advance with respect to the design of HA-based carriers and the selection of tumors to treat according to their CD44 expression profile.

Enhanced Intraliposomal Metallic Nanoparticle Payload Capacity Using Microfluidic-Assisted Self-Assembly.

Hybrids composed of liposomes (L) and metallic nanoparticles (NPs) hold great potential for imaging and drug delivery purposes. However, the efficient incorporation of metallic NPs into liposomes using conventional methodologies has so far proved to be challenging. In this study, we report the fabrication of hybrids of liposomes and hydrophobic gold NPs of size 2-4 nm (Au) using a microfluidic-assisted self-assembly process. The incorporation of increasing amounts of AuNPs into liposomes was examined using microfluidics and compared to L-AuNP hybrids prepared by the reverse-phase evaporation method. Our microfluidics strategy produced L-AuNP hybrids with a homogeneous size distribution, a smaller polydispersity index, and a threefold increase in loading efficiency when compared to those hybrids prepared using the reverse-phase method of production. Quantification of the loading efficiency was determined by ultraviolet spectroscopy, inductively coupled plasma mass spectroscopy, and centrifugal field flow fractionation, and qualitative validation was confirmed by transmission electron microscopy. The higher loading of gold NPs into the liposomes achieved using microfluidics produced a slightly thicker and more rigid bilayer as determined with small-angle neutron scattering. These observations were confirmed using fluorescent anisotropy and atomic force microscopy. Structural characterization of the liposomal-NP hybrids with cryo-electron microscopy revealed the coexistence of membrane-embedded and interdigitated NP-rich domains, suggesting AuNP incorporation through hydrophobic interactions. The microfluidic technique that we describe in this study allows for the automated production of monodisperse liposomal-NP hybrids with high loading capacity, highlighting the utility of microfluidics to improve the payload of metallic NPs within liposomes, thereby enhancing their application for imaging and drug delivery.

Oxidation-Responsive Materials: Biological Rationale, State of the Art, Multiple Responsiveness, and Open Issues.

In this review, a general introduction to biological oxidants (focusing on reactive oxygen species, ROS) and the biomedical rationale behind the development of materials capable of responding to ROS is provided. The state of the art for preparative aspects and mechanistic responses of the most commonly used macromolecular ROS-responsive systems, including polysulfides, polyselenides, polythioketals, polyoxalates, and also oligoproline- and catechol-based materials, is subsequently given. The endowment of multiple responsiveness, with specific emphasis on the cases where a molecular logic gate behavior can be obtained, is focused on. Finally, fundamental open issues, which include implications of the "drug"-like character of ROS-responsive materials (inherent anti-inflammatory behavior) and the poor quantitative understanding of ROS roles in biology, are discussed.

Main Chain Polysulfoxides as Active 'Stealth' Polymers with Additional Antioxidant and Anti-Inflammatory Behaviour.

We present the evaluation of a sulfoxide-based polymer (poly(propylene sulfoxide), PPSO) as a potential 'stealth' macromolecule, and at the same time as a pharmacologically active (anti-inflammatory/anti-oxidant) material. The combination of these two concepts may at first seem peculiar since the gold standard polymer in biomaterials and drug delivery, poly(ethylene glycol) (PEG), is 'stealth' due to its chemical and biological inertness, which makes it hardly biologically active. Polysulfoxides, on the contrary, may couple a substantial inertness towards biomolecules under homeostatic conditions, with the possibility to scavenge reactive oxygen species (ROS) associated to inflammation. Polysulfoxides, therefore, are rather uniquely, 'active' 'stealth' polymers. Here, we describe the synthesis of PPSO through controlled oxidation of poly(propylene sulfide) (PPS), which on its turn was obtained via anionic ring-opening polymerization. In vitro, PPSO was characterized by a low toxicity (IC50 ~7 mg/mL at 24 h on human dermal fibroblasts) and a level of complement activation (in human plasma) and macrophage uptake slightly lower than PEG of a similar size. Importantly, and differently from PEG, on LPS-activated macrophages, PPSO showed a strong and dose-dependent ROS (hydrogen peroxide and hypochlorite)-scavenging activity, which resulted in a corresponding reduction of cytokine production.

Tyrosinase-Mediated Bioconjugation. A Versatile Approach to Chimeric Macromolecules.

We present a method for tyrosine-selective and reversible bioconjugation; tyrosines are enzymatically converted into catechols and in situ "clicked" onto boronic acids. Importantly, our process selectively produces catechols and avoids quinones, thereby improving the control over the chemical identity of the products. We have conjugated boronic acid-containing hyaluronic acid (HyA) to peptides bearing tyrosines in variable number and position; the use of tagging peptides for the provision of well exposed tyrosine residues-in our case the hemagglutinin-derived HA-tag-makes our approach applicable to virtually any protein; we have demonstrated this concept by conjugating HA-tagged ovalbumin to HyA, thereby also showing the feasibility of producing chimeric proteoglycans. A caveat of this appproach is that, although the formation of boronic esters does not affect the biological recognition of substrates (ovalbumin and HyA), the introduction of catechols may alter some of their biological properties: for example, only after tyrosinase treatment ovalbumin directly induced dendritic cell maturation, either alone or as a HyA conjugate.

Chitosan/ß-glycerophosphate-based microparticles manufactured by laminar jet break-up technology.

This study is about the use of ß-glycerophosphate (ßGP) to modulate the production of chitosan microparticles through a technology of jet break-up. ßGP has been described as capable of producing chitosan gels without additional complexing agents via a thermal transition (inverse gelation). A preliminary assessment on the effect of temperature on the viscosity and gelation of chitosan/ßGP precursors demonstrated that the crosslinking process was too slow to afford microparticle production via jet break-up. Instead, ßGP was used as a solubilizer to provide stable chitosan solution at neutral pH, which allowed the preparation of microparticles through polyelectrolyte complexation (with triphosphate) under physiological conditions, as opposed to the more conventional method of chitosan solubilisation in acids. Here, the key parameters of the microencapsulation process have been optimized, aiming to produce spherical particle of well-defined size and circularity, as well as toroidal microparticles, with a physico-chemical evaluation of the products.

Revisiting Boronate/Diol Complexation as a Double Stimulus-Responsive Bioconjugation.

This study presents a quantitative assessment of the complexation between boronic acids and diols as a reversible and double-stimulus (oxidation and acidification)-responsive bioconjugation reaction. First, by using a competition assay, we have evaluated the equilibrium constants (water, pH 7.4) of 34 boronate/diol pairs, using diols of both aliphatic and aromatic (catechols) nature; in general, catechols were characterized by constants 3 orders of magnitude higher than those of aliphatic diols. Second, we have demonstrated that successful complexation with diols generated in situ via enzymatic reactions, and the boronate complexation was also employed to calculate the Michaelis-Menten parameters for two catechol-producing reactions: the demethylation of 3-methoxytyramine and the 2-hydroxylation of estradiol, respectively, mediated by P4502D6 and P4501A2. Third, we have prepared phenylboronic acid-functionalized hyaluronic acid (HA) and demonstrated the pH and H2O2-responsive character of the adducts that it formed with Alizarin Red S (ARS) used as a model catechol. The versatility and selectivity of the complexation and the mild character of the chemical species involved therefore make the boronate/catechol reaction an interesting candidate for bioconjugation purposes.

Chitosan/Hyaluronic Acid Nanoparticles: Rational Design Revisited for RNA Delivery.

Chitosan/hyaluronic acid (HA) nanoparticles can be used to deliver an RNA/DNA cargo to cells overexpressing HA receptors such as CD44. For these systems, unequivocal links have not been established yet between chitosan macromolecular (molecular weight; degree of deacetylation, i.e., charge density) and nanoparticle variables (complexation strength, i.e., stability; nucleic acid protection; internalization rate) on one hand, and transfection efficiency on the other hand. Here, we have focused on the role of avidity on transfection efficiency in the CD44-expressing HCT-116 as a cellular model; we have employed two differently sized payloads (a large luciferase-encoding mRNA and a much smaller anti-Luc siRNA), and a small library of chitosans (variable molecular weight and degree of deactylation). The RNA avidity for chitosan showed-as expected-an inverse relationship: higher avidity-higher polyplex stability-lower transfection efficiency. The avidity of chitosan for RNA appears to lead to opposite effects: higher avidity-higher polyplex stability but also higher transfection efficiency. Surprisingly, the best transfecting particles were those with the lowest propensity for RNA release, although this might be a misleading relationship: for example, the same macromolecular parameters that increase avidity can also boost chitosan's endosomolytic activity, with a strong enhancement in transfection. The performance of these nonviral vectors appears therefore difficult to predict simply on the basis of carrier- or payload-related variables, and a more holistic consideration of the journey of the nanoparticle, from cell uptake to cytosolic bioavailability of payload, is needed. It is also noteworthy that the nanoparticles used in this study showed optimal performance under slightly acidic conditions (pH 6.4), which is promising for applications in a tumoral extracellular environment. It is also worth pointing out that under these conditions we have for the first time successfully delivered mRNA with chitosan/HA nanoparticles.

The Effect of Branching (Star Architecture) on Poly(d,l-lactide) (PDLLA) Degradation and Drug Delivery.

This study focuses on the comparative evaluation of star (branched) and linear poly(l,d-lactic acid) (PDLLA) as degradable materials employed in controlled release. The polymers were prepared via ring-opening polymerization initiated by decanol (linear), pentaerythritol (4-armed star) and dipentaerythritol (6-armed star), and processed both in the form of films and nanoparticles. Independent of the length or number of their arms, star polymers degrade slower than linear polymers, possibly through a surface (vs bulk) mechanism. Further, the release of a model drug (atorvastatin) followed zero-order-like kinetics for the branched polymers, and first-order kinetics for linear PDLLA. Using NHOst osteoblastic cells, both linear and star polymers were devoid of any significant toxicity and released atorvastatin in a bioavailable form; cell adhesion was considerably lower on star polymer films, and the slower release from their nanoparticles appeared to be beneficial to avoid atorvastatin overdosing.

Polymeric micelles with dual thermal and reactive oxygen species (ROS)-responsiveness for inflammatory cancer cell delivery.

BACKGROUND: The object of this study was to develop a thermally and reactive oxygen species-responsive nanocarrier system for cancer therapy. RESULTS: PPS-PNIPAm block copolymer was designed and synthesised using a combination of living anionic ring-opening polymerization and atom transfer radical polymerization. The synthesized polymer formed micellar aggregates in water and demonstrated dual responsiveness towards temperature and oxidants. Using doxorubicin (DOX) as a model drug, encapsulation and in vitro release of the drug molecules in PPS-PNIPAm nanocarriers confirmed the responsive release properties of such system. Cell uptake of the DOX loaded micelles was investigated with human breast cancer cell line (MCF-7). The results showed Dox-loaded micelles were able to be taken by the cells and mainly reside in the cytoplasma. In the stimulated cells with an elevated level of ROS, more released DOX was observed around the nuclei. In the cytotoxicity experiments, the Dox-loaded micelles demonstrated comparable efficacy to free DOX at higher concentrations, especially on ROS stimulated cells. CONCLUSIONS: These results demonstrated that PPS-PNIPAm nanocarriers possess the capability to respond two typical stimuli in inflammatory cells: temperature and oxidants and can be used in anticancer drug delivery.

Linear, Star, and Comb Oxidation-Responsive Polymers: Effect of Branching Degree and Topology on Aggregation and Responsiveness.

Families of amphiphilic oxidation-responsive polymers (poly(ethylene glycol)-polysulfides) with different architectures (linear, 4, 6, and 8-armed stars and 10, 15, and 20-armed combs) and compositions (variable ethylene sulfide/propylene sulfide ratio) are prepared. In water, all the polymers assemble in spherical micelles, with critical micellar concentrations <0.01 mg mL-1 for all the branched polymers. Triple-detection gel permeation chromatography (GPC) and asymmetric field flow fractionation (AFFF) with dynamic and static light scattering detection, respectively, show an increasing compaction of the polymeric coil and a strong reduction of the aggregation number with increasing degree of branching. The key finding of this study is that the kinetics of the oxidative response sharply depend on the branching; in particular, it is highlighted that the degree of branching influences the lag time before a response can be observed rather than the speed of the response itself, a phenomenon that is attributed to a branching-dependent solubility of the oxidant in the polysulfide matrix.

Mitsunobu Reaction: A Versatile Tool for PEG End Functionalization.

The Mitsunobu reaction can be efficiently used for the transformation of poly(ethylene glycol) (PEG) terminal OH group(s) into a variety of functions. In comparison to more classical approaches of PEG functionalization, the main advantage of the Mitsunobu reaction attains to the fact that in one step, with no detrimental effect on PEG integrity (e.g., chain cleavage). Here, its quantitative conversion is demonstrated into derivatives that, either directly or after deprotection, are amenable to (bio)conjugation reactions: azides (Huisgen cycloaddition), aldehydes, primary amines (Schiff base formation and reduction), thiols, and N-oxymaleimide (Michael-type addition). Therefore this reaction is proposed as a general tool for the preparation of functionalities for the purpose of PEGylation, and more generally for (bio)conjugation purposes.

Magnesium alginate as a low-viscosity (intramolecularly cross-linked) system for the sustained and neuroprotective release of magnesium.

The administration of Mg ions is advantageous in pathological scenarios such as pre-enclampsia and forms of neuroinflammation (e.g. stroke or injury); yet, few systems exist for their sustained delivery. Here, we present the (static light scattering and diffusing-wave spectroscopy) characterization of magnesium alginate (MgAlg) as a potentially injectable vehicle ifor the delivery of Mg. Differently from other divalent cations, Mg does not readily induce gelation: it acts within MgAlg coils, making them more rigid and less prone to entangle. As a result, below a threshold concentration (notionally below 0.5 % wt.) MgAlg are inherently less viscous than those of sodium alginate (NaAlg), which is a major advantage for injectables; at higher concentrations, however, (stable, Mg-based) aggregation starts occurring. Importantly, Mg can then be released e.g. in artificial cerebrospinal fluid, via a slow (hours) process of ion exchange. Finally, we here show that MgAlg protects rat neural stem cells from the consequence of an oxidative insult (100 µM H2O2), an effect that we can only ascribe to the sustained liberation of Mg ions, since it was not shown by NaAlg, MgSO4 or the NaAlg/MgSO4 combination. Our results therefore indicate that MgAlg is a promising vehicle for Mg delivery under pathological (inflammatory) conditions.