Common mechanistic themes for the powerstroke of kinesin-14 motors.

Kar3Cik1 is a heterodimeric kinesin-14 from Saccharomyces cerevisiae involved in spindle formation during mitosis and karyogamy in mating cells. Kar3 represents a canonical kinesin motor domain that interacts with microtubules under the control of ATP-hydrolysis. In vivo, the localization and function of Kar3 is differentially regulated by its interacting stoichiometrically with either Cik1 or Vik1, two closely related motor homology domains that lack the nucleotide-binding site. Indeed, Vik1 structurally resembles the core of a kinesin head. Despite being closely related, Kar3Cik1 and Kar3Vik1 are each responsible for a distinct set of functions in vivo and also display different biochemical behavior in vitro. To determine a structural basis for their distinct functional abilities, we used cryo-electron microscopy and helical reconstruction to investigate the 3-D structure of Kar3Cik1 complexed to microtubules in various nucleotide states and compared our 3-D data of Kar3Cik1 with that of Kar3Vik1 and the homodimeric kinesin-14 Ncd from Drosophila melanogaster. Due to the lack of an X-ray crystal structure of the Cik1 motor homology domain, we predicted the structure of this Cik1 domain based on sequence similarity to its relatives Vik1, Kar3 and Ncd. By molecular docking into our 3-D maps, we produced a detailed near-atomic model of Kar3Cik1 complexed to microtubules in two distinct nucleotide states, a nucleotide-free state and an ATP-bound state. Our data show that despite their functional differences, heterodimeric Kar3Cik1 and Kar3Vik1 and homodimeric Ncd, all share striking structural similarities at distinct nucleotide states indicating a common mechanistic theme within the kinesin-14 family.

Characterization of the woody biomass feedstock potential resulting from California's drought.

Regional tree die-off events generate large quantities of standing dead wood, raising concern over catastrophic wildfire and other hazards. Governmental responses to tree die-off have often focused on incentivizing biomass energy production that utilizes standing dead trees removed for safety concerns. However, the full distribution of potential woody bioenergy feedstock after tree die-off has not been evaluated due to the complexities of surveying and precisely measuring large forested areas. In this paper, we present a novel method for estimating standing dead biomass at a fine spatial resolution that combines aerial survey data with forest structure maps. Using this method, we quantify biomass generated by the unprecedented tree die-off that occurred in California following a 4-year drought and widespread pest outbreaks. The results are used to estimate feasibly recoverable feedstock for energy production. We find that approximately 95.1 million bone-dry tons (BDT) of dead biomass resulted from 2012-2017 mortality, with a lower bound of 26.2 million BDT. In other words, of the aboveground live tree biomass in 2012, ~1.3-4.8% died by 2017. Of the standing dead biomass, 29% meets minimum constraints for potential cost-effective bioenergy feedstock. This proportion drops to as low as 15% in the most affected areas due to terrain slope, wilderness status, and other factors, highlighting the need to complement disposal via biomass energy with other strategies to mitigate the risks of the tree mortality crisis, which is likely to only become more severe over time due to climate change.

HURP wraps microtubule ends with an additional tubulin sheet that has a novel conformation of tubulin.

HURP is a newly discovered microtubule-associated protein (MAP) required for correct spindle formation both in vitro and in vivo. HURP protein is highly charged with few predicted secondary and tertiary folding domains. Here we explore the effect of HURP on pure tubulin, and describe its ability to induce a new conformation of tubulin sheets that wrap around the ends of intact microtubules, thereby forming two concentric tubes. The inner tube is a normal microtubule, while the outer one is a sheet composed of tubulin protofilaments that wind around the inner tube with a 42.5 degrees inclination. We used cryo-electron microscopy and unidirectional surface shadowing to elucidate the structure and conformation of HURP-induced tubulin sheets and their interaction with the inner microtubule. These studies clarified that HURP-induced sheets are composed of anti-parallel protofilaments exhibiting P2 symmetry. HURP is a unique MAP that not only stabilizes and bundles microtubules, but also polymerizes free tubulin into a new configuration.

Identification and structure of a putative Ca2+-binding domain at the C terminus of AQP1.

Aquaporin-1 (AQP1) is the first functionally identified aquaporin of a growing family of membrane water channels found in all forms of life. Recently, a possible secondary function as a cyclic guanosine monophosphate (cGMP) gated ion channel was attributed to AQP1. We have reconstituted purified protein from bovine and human red blood cell membranes into highly ordered 2D crystals. The topography of both AQP1s was determined by electron microscopy from freeze-dried, unidirectionally metal-shadowed 2D crystals as well as from surface topographs of native crystals recorded in buffer solution with the atomic force microscope (AFM). In spite of the high level of sequence homology between bovine and human AQP1, the surfaces showed distinct differences. Alignment of both sequences and comparison of the acquired surface topographies with the atomic model of human AQP1 revealed the topographic changes on the surface of bovine AQP1 to be induced by a few amino acid substitutions. A striking degree of sequence homology was found between the carboxyl-terminal domains of AQP1s from different organisms and EF-hands from Ca2+-binding proteins belonging to the calmodulin superfamily, suggesting the existence of a Ca2+-binding site at the C terminus of AQP1 instead of the putative cGMP-binding site reported previously. To unveil its position on the acquired surface topographies, 2D crystals of AQP1 were digested with carboxypeptidase Y, which cleaves off the intracellular C terminus. Difference maps of AFM topographs between the native and the peptidase-treated AQP1s showed the carboxylic tail to be close to the 4-fold symmetry axis of the tetramer. SDS-PAGE and matrix-assisted laser desorption/ionisation mass spectrometry of native and decarboxylated bovine and human AQP1 revealed that the EF-hand motif found at the C terminus of AQP1 was partially resistant to peptidase digestion. The importance of the C-terminal domain is implicated by structural instability of decarboxylated AQP1. A possible role of the C terminus and calcium in translocation of AQP1 in cholangiocytes from intracellular vesicles to the plasma membrane and in triggering its fusion is discussed. Functional studies are now required to identify the physiological role of the Ca2+-binding site.

Surface-decoration of microtubules by human tau.

Tau is a neuronal, microtubule-associated protein that stabilizes microtubules and promotes neurite outgrowth. Tau is largely unfolded in solution and presumably forms mostly random coil. Because of its hydrophilic nature and flexible structure, tau complexed to microtubules is largely invisible by standard electron microscopy methods. We applied a combination of high-resolution metal-shadowing and cryo-electron microscopy to study the interactions between tau and microtubules. We used recombinant tau variants with different domain compositions, (1) full length tau, (2) the repeat domain that mediates microtubule binding (K19), and (3) two GFP-tau fusion proteins that contain a globular marker (GFP) attached to full-length tau at either end. All of these constructs bind exclusively to the outside of microtubules. Most of the tau-related mass appears randomly distributed, creating a "halo" of low-density mass spread across the microtubule surface. Only a small fraction of tau creates a periodic signal at an 8 nm interval, centered on alpha-tubulin subunits. Our data suggest that tau retains most of its disordered structure even when bound to the microtubule surface. Hence, it binds along, as well as across protofilaments. Nevertheless, even minute concentrations of tau have a strong stabilizing effect and effectively scavenge unpolymerized tubulin.

Atomic models of de novo designed cc beta-Met amyloid-like fibrils.

The common characteristics of amyloid and amyloid-like fibrils from disease- and non-disease-associated proteins offer the prospect that well-defined model systems can be used to systematically dissect the driving forces of amyloid formation. We recently reported the de novo designed cc beta peptide model system that forms a native-like coiled-coil structure at low temperatures and which can be switched to amyloid-like fibrils by increasing the temperature. Here, we report a detailed molecular description of the system in its fibrillar state by characterizing the cc beta-Met variant using several microscopic techniques, circular dichroism spectroscopy, X-ray fiber diffraction, solid-state nuclear magnetic resonance, and molecular dynamics calculations. We show that cc beta-Met forms amyloid-like fibrils of different morphologies on both the macroscopic and atomic levels, which can be controlled by variations of assembly conditions. Interestingly, heterogeneity is also observed along single fibrils. We propose atomic models of the cc beta-Met amyloid-like fibril, which are in good agreement with all experimental data. The models provide a rational explanation why oxidation of methionine residues completely abolishes cc beta-Met amyloid fibril formation, indicating that a small number of site-specific hydrophobic interactions can play a major role in the packing of polypeptide-chain segments within amyloid fibrils. The detailed structural information available for the cc beta model system provides a strong molecular basis for understanding the influence and relative contribution of hydrophobic interactions on native-state stability, kinetics of fibril formation, fibril packing, and polymorphism.

The Schizosaccharomyces pombe EB1 homolog Mal3p binds and stabilizes the microtubule lattice seam.

End binding 1 (EB1) proteins are highly conserved regulators of microtubule dynamics. Using electron microscopy (EM) and high-resolution surface shadowing we have studied the microtubule-binding properties of the fission yeast EB1 homolog Mal3p. This allowed for a direct visualization of Mal3p bound on the surface of microtubules. Mal3p particles usually formed a single line on each microtubule along just one of the multiple grooves that are formed by adjacent protofilaments. We provide structural data showing that the alignment of Mal3p molecules coincides with the microtubule lattice seam as well as data suggesting that Mal3p not only binds but also stabilizes this seam. Accordingly, Mal3p stabilizes microtubules through a specific interaction with what is potentially the weakest part of the microtubule in a way not previously demonstrated. Our findings further suggest that microtubules exhibit two distinct reaction platforms on their surface that can independently interact with target structures such as microtubule-associated proteins, motors, kinetochores, or membranes.

Structural analysis of the ZEN-4/CeMKLP1 motor domain and its interaction with microtubules.

The centralspindlin complex is required for the assembly and maintenance of the central spindle during late anaphase and the completion of cytokinesis. It is composed of two copies each of the kinesin-like protein ZEN-4, a Caenorhabditis elegans MKLP-1 (Kinesin-6 family), and the RhoGAP CYK-4. By using cryo-electron microscopy and helical 3D reconstruction, we are investigating the structural features of the interactions between monomeric and dimeric motor domain constructs of ZEN-4 and microtubules. We have calculated helically averaged 3D maps of microtubules decorated with ZEN-4 motor domain in the presence of AMP-PNP, ADP, ADP-AlF(4)(-), and nucleotide-free conditions. We used statistical difference mapping to compare these maps among each other and to related maps obtained from microtubules decorated with a well-characterized Kinesin-1 motor domain from Neurospora crassa. Thereby, we found distinct structural features in microtubule-ZEN-4 complexes that may directly relate to the functional properties of ZEN-4 and centralspindlin. Furthermore, we investigated the location, structure, and function of a highly conserved extension of approximately 50 residues unique to the Kinesin-6 subfamily, located in the motor core loop6/beta4 region.

A structural model for monastrol inhibition of dimeric kinesin Eg5.

Eg5 or KSP is a homotetrameric Kinesin-5 involved in centrosome separation and assembly of the bipolar mitotic spindle. Analytical gel filtration of purified protein and cryo-electron microscopy (cryo-EM) of unidirectional shadowed microtubule-Eg5 complexes have been used to identify the stable dimer Eg5-513. The motility assays show that Eg5-513 promotes robust plus-end-directed microtubule gliding at a rate similar to that of homotetrameric Eg5 in vitro. Eg5-513 exhibits slow ATP turnover, high affinity for ATP, and a weakened affinity for microtubules when compared to monomeric Eg5. We show here that the Eg5-513 dimer binds microtubules with both heads to two adjacent tubulin heterodimers along the same microtubule protofilament. Under all nucleotide conditions tested, there were no visible structural changes in the monomeric Eg5-microtubule complexes with monastrol treatment. In contrast, there was a substantial monastrol effect on dimeric Eg5-513, which reduced microtubule lattice decoration. Comparisons between the X-ray structures of Eg5-ADP and Eg5-ADP-monastrol with rat kinesin-ADP after docking them into cryo-EM 3-D scaffolds revealed structural evidence for the weaker microtubule-Eg5 interaction in the presence of monastrol.

Characterization of recombinant, membrane-attached full-length prion protein.

An abnormal isoform, PrP(Sc), of the normal cellular prion protein (PrP(C)) is the major component of the causative agent of prion diseases. Both isoforms were found to possess the same covalent structures, including a C-terminal glycosylphosphatidylinositol anchor, but different secondary and tertiary structures. In this study, a variant of full-length PrP with an unpaired cysteine at the C terminus was recombinantly produced in Escherichia coli, covalently coupled to a thiol-reactive phospholipid, and incorporated into liposomes to serve as a model for studying possible changes in structure and stability of recombinant PrP upon membrane attachment. Covalent coupling of PrP to liposomes did not result in significant structural changes observable by far-UV circular dichroism. Moreover, limited proteolysis experiments failed to detect changes in the stability of liposome-bound PrP relative to soluble PrP. These data suggest that the requirement of raft localization for the PrP(C) to PrP(Sc) conversion, observed previously in cell culture models, is not because of a direct influence of raft lipids on the structure and stability of membranebound PrP(C) but caused by other factors, e.g. increased local PrP concentrations or high effective concentrations of membrane-associated conversion factors. The availability of recombinant PrP covalently attached to liposomes provides the basis for systematic in vitro conversion assays with recombinant PrP on the surface of membranes. In addition, our results indicate that the three-dimensional structure of mammalian PrP(C) in membranes is identical to that of recombinant PrP in solution.