Anterior Mandibular Lingual Defect As a Possible Cause of Near-Fatal Bleeding During Routine Dental Implant Surgery: A Retrospective Computed Tomography Study.

INTRODUCTION: The anterior mandible is generally regarded as a safe anatomical region for implant placement. However, anatomical variations may lead to severe intraoperative complications with potential fatal outcome. The objective of this study was to evaluate the anterior mandibular lingual defect (AMLD) in patients undergoing implant surgery. MATERIALS AND METHODS: The CT data of 338 consecutive dental implant patients were reformatted with appropriate software. The AMLDs were first identified using 3-D reconstruction and further evaluated in the relevant 2-D slices. RESULTS: The AMLD was present in 10.95% of patients; of these, 83.8% were present bilaterally. No significant differences were found between sex, age, or race within the investigated population with regards to the presence of the AMLD. CONCLUSIONS: The presence of an AMLD might be a possible cause of near-fatal bleeding during routine dental implant surgery. This study found the presence of the AMLD in a small (10.95%), but not negligible number of patients. To avoid possible complications, meticulous planning and the use of 3-D imaging are advisable before performing implant surgery in this anatomical region.

Immediate vs. early loading of SLA implants in the posterior mandible: 5-year results of randomized controlled clinical trial.

OBJECTIVES: The aim of this study was to compare clinical results of immediate and early loading (EL) self-tapping implants placed in posterior mandibles. MATERIAL AND METHODS: Twelve patients with bilateral edentulous posterior mandibular were randomly assigned to treatment either with immediate (test) or early loaded implants (control). Seventy-two self-tapping implants with SLA surface (Ø 4, 1/4, 8 mm; length 8 and 10 mm) were analyzed in this study. Test implants (36) were loaded on the day of surgery and control implants 6 weeks later. The measuring of implant stability quotient (ISQ) was performed on 0, 6th, 12th, and 52nd week after implant insertion. The bone resorption, modified plaque, and bleeding index were notified at 1 and 5 years later. RESULTS: After 5 years, survival in the both groups was 100%. The mean value of primary implant stability was 76.92 ± 0.79 ISQ. In the first 6 weeks, ISQ values significantly increased in the test group (77.92 ± 1.16 vs. 79.61 ± 0.90) as well as in the control group (7.92 ± 1.05 vs. 77.55 ± 0.99). A significant longitudinal increase in ISQ value was recorded in test and control group. The differences between immediate and early loaded implants were statistically insignificant (P > 0.05). At the 5 years, no statistically significant differences were found between immediate and early loaded implants with respect to mean crestal bone loss measurements (0.4 ± 0.24 vs. 0.8 ± 0.15 mm), mean bleeding index (0.22 ± 0.11 vs. 0.25 ± 0.11), and mean plaque index (0.17 ± 0.15 vs. 0.19 ± 0.20). CONCLUSION: Based on these results, the self-tapping implants inserted in posterior mandible can provide adequate primary stability value as the main factor for immediate and EL protocol.

Buccal and palatal alveolar bone dimensions in the anterior maxilla: A micro-CT study.

OBJECTIVE: Anterior maxillary immediate implant placement has become a popular procedure. It has aesthetic and functional risks. A prerequisite for success is sufficient alveolar bone for primary stability. Many cone-beam computed tomography (CBCT) studies have assessed alveolar bone dimensions in the anterior maxilla, with varying results. More accurate information on the alveolar bone dimensions in the anterior maxilla is required. The objective of the present study was to evaluate bone dimensions in the anterior maxilla using micro-CT, a high-resolution imaging tool. MATERIALS AND METHODS: Seventy-two human skulls were scanned using micro-CT at the South African Nuclear Energy Corporation. Specialized software was used for 3-D rendering, segmentation, and visualization of the reconstructed volume data. Axial planes were created over each alveolus/tooth from canine to canine. Buccal and palatal bone dimensions were measured at crestal, 3 mm, 6 mm, and 9 mm levels. RESULTS: Buccal bone rarely exceeded 0.5 mm, consisting of bundle bone only for all investigated teeth at all levels. Up to a third of teeth showed buccal fenestrations. Alveolar bone on the palatal side was thicker than buccal and increased from <1 mm at crestal level up to 3.77 mm, 4.56 mm, and 5.43 mm for centrals, laterals, and canines at the 9 mm level, respectively. CONCLUSIONS: Immediate implants in the anterior maxillae has anatomical risks. Alveolar bone on the buccal aspect is very thin, with fenestrations in certain positions. Therefore, a thorough planning and individual approach are needed to avoid possible complications and achieve stable aesthetic and functional results in the long-term.

The Role of Artificial Intelligence in the Accurate Diagnosis and Treatment Planning of Non-Syndromic Supernumerary Teeth: A Case Report in a Six-Year-Old Boy.

Hyperdontia can cause numerous aesthetic and functional problems. The diagnosis is made radiologically, and the most commonly used radiological method is orthopantomography, while CBCT is also used. CBCT has the advantage of being three-dimensional. Artificial Intelligence is widely used in medicine and dentistry, and it can create a specific algorithm to aid in diagnosis and suggest therapeutic procedures. In a case report, a 6-year-old boy was diagnosed with a supernumerary tooth between the upper central incisors. Orthopantomography revealed another impacted supernumerary tooth, and the patient was referred for CBCT. A platform for analyzing dental images, based on artificial intelligence, Diagnocat (Diagnocat Inc., San Francisco, CA, USA), was used for analysis and the AI system identified the supernumerary teeth and provided a complete plan for treatment. The use of AI in dentistry allows for faster and more accurate diagnosis and treatment planning.

A micro-CT study of the greater palatine foramen in human skulls.

The greater palatine foramen (GPF) is an important anatomical landmark and has substantial clinical relevance in dental surgery. Knowledge of its precise location and dimensions is required for proper planning of surgical procedures involving the posterior maxilla. We used microfocus computed tomography to determine the location and dimensions of the GPF, and any sex and race variations in those measurements, in 77 human skulls scanned at the South African Nuclear Energy Corporation. Specialized software was used for three-dimensional rendering, segmentation, and visualization of the reconstructed volume data. GPF location ranged from adjacent to the first molar to distal of the third molar. The most common GPF location was near the third molar (66.7% of skulls), and the GPF was as close as 6.31 mm (mean distance 12.75 ± 3 mm). The mean GPF dimensions were 5.22 mm on the anterior-posterior axis and 2.81 mm on the lateral-medial axis. We noted no significant differences in relation to race, sex, or age in the sample. The GPF was adjacent or posterior to the third maxillary molar in most skulls.

Stability Development of Immediately Loaded Hybrid Self-Tapping Implants Inserted in the Posterior Maxilla: 1-Year Results of a Randomized Controlled Trial.

The objective of the present study was to elucidate stability development of immediately loaded hybrid self-tapping implants inserted in the posterior maxilla. Forty-eight hybrid self-tapping implants with a chemically modified surface (∅4.1; length: 8 mm) were inserted bilaterally in the maxillary first and second premolar and first molar sites of 8 patients. In each patient, both sides of the maxilla were assigned randomly to either immediate (IL) or early (EL) loading group. Implant stability was evaluated by means of resonance frequency analysis immediately after implant placement and after 1, 2, 3, 4, 5, 6, 12, 26, and 52 weeks. High values of primary stability were found in both groups (71.91 ± 6.52 implant stability quotient [ISQ] in IL group; 73.87 ± 6.5 ISQ in EL group), with significant differences between the groups at the different time points. Initial decrease in stability was observed between the first and fifth weeks in the IL group and between the first and third weeks for the EL group. In the IL group 1 implant was removed after 3 weeks due to lack of stability. Early results of this study showed the ability of hybrid self-tapping dental implants with a chemically modified surface to achieve sufficient primary stability and to maintain high values of secondary implant stability in bone type 3 and 4, even when loaded immediately. Minimal alterations in stability were observed for both investigated groups, but the EL group showed faster recovery after an initial drop in stability.

Possibilities of reconstruction and implant-prosthetic rehabilitation following mandible resection.

INTRODUCTION: Mandible reconstruction is still very challenging for surgeons. Mandible defects could be the consequence of ablative surgery for malignancies, huge jaw cysts, infection and trauma. Segmental resection of the mandible may compromise orofacial function and often lead to patients psychological disorders. Despite very frequent use of microvascular flaps, autogenous bone grafts are still very reliable technique for mandible reconstruction. Comprehensive therapy means not only mandible reconstruction, but prosthodontic rehabilitation supported by dental implants, which can significantly improve patients quality of life. The aim of this paper was to evaluate possible techniques of mandible reconstruction and to present a patient who had been submitted to mandible resection and reconstruction with autogenous iliac bone graft and prosthodontic rehabilitation with fixed denture anchoraged by disc-shaped implants in early loading protocol. CASE REPORT: Mandible reconstruction was performed simultaneously with resection. Autogenous iliac bone graft was taken, reshaped and placed in two parts, to the required optimal contour of the mandible. After graft consolidation, decision was made for prosthodontics rehabilitation with fixed dentures supported by implants. In addition to the standard preoperative procedures, planning was done based on a biomodel gained by rapid prototyping after CT scan. It offered a real 3D planning to obtain a proper shape, dimension and the position of implants. CONCLUSION: If bone dimensions of a reconstructed mandible are insufficient, like in the presented case, the use of basal osseointegrated implants may be a method of choice. Avoiding bone augmentation procedures, as well as early loading protocol for this type of implants, shorten the total rehabilitation time, which is very convenient for patients. Fixed denture supported by dental implants is the best solution for comprehensive rehabilitation after mandible resection.

Efficacy of fentanyl transdermal patch in pain control after lower third molar surgery: A preliminary study

BACKGROUND: Surgical removal of impacted lower third molars is a common oral surgical procedure, generally followed by moderate to severe postoperative pain. Transdermal drug delivery as a concept offers interesting possibilities for postoperative pain control. The aim of this study was to evaluate the efficacy of transdermal system with fentanyl in relieving pain following impacted lower third molar surgery. MATERIAL AND METHODS: Seventeen patients with bilateral impacted lower third molars were included in this preliminary study. For postoperative pain control, patients randomly received a fentanyl patch plus placebo tablet after the first operation and regular (placebo) patch and an analgesic, after the second operation. Analgesia was evaluated during first 24 hours postoperatively according to patients' reports about time of first pain appearance and additional analgesic consumption. Pain severity was rated using a 10 cm long visual analogue scale (VAS). RESULTS: Intensity of postoperative pain and postoperative analgesic consumption were significantly lower after the Fentanyl Transdermal System (FTS) was applied (p < 0.05). Duration of postoperative analgesia was significantly higher with FTS when compared to control treatment (p < 0.05). CONCLUSIONS: Based on the results of this preliminary study, transdermal system with fentanyl significantly reduced postoperative pain after third molar surgery