Triphenylamine-Based Conjugated Polyelectrolyte as a Hole Transport Layer for Efficient and Scalable Perovskite Solar Cells.

π-Conjugated polyelectrolytes (CPEs) have been studied as interlayers on top of a separate hole transport layer (HTL) to improve the wetting, interfacial defect passivation, and crystal growth of perovskites. However, very few CPE-based HTLs have been reported without rational molecular design as ideal HTLs for perovskite solar cells (PeSCs). In this study, the authors synthesize a triphenylamine-based anionic CPE (TPAFS-TMA) as an HTL for p-i-n-type PeSCs. TPAFS-TMA has appropriate frontier molecular orbital (FMO) levels similar to those of the commonly used poly(bis(4-phenyl)-2,4,6-trimethylphenylamine) (PTAA) HTL. The ionic and semiconducting TPAFS-TMA shows high compatibility, high transmittance, appropriate FMO energy levels for hole extraction and electron blocking, as well as defect passivating properties, which are confirmed using various optical and electrical analyses. Thus, the PeSC with the TPAFS-TMA HTL exhibits the best power conversion efficiency (PCE) of 20.86%, which is better than that of the PTAA-based device (PCE of 19.97%). In addition, it exhibits negligible device-to-device variations in its photovoltaic performance, contrary to the device with PTAA. Finally, a large-area PeSC (1 cm2 ) and mini-module (3 cm2 ), showing PCEs of 19.46% and 18.41%, respectively, are successfully fabricated. The newly synthesized TPAFS-TMA may suggest its great potential as an HTL for large-area PeSCs.

Convolvulus plant-A comprehensive review from phytochemical composition to pharmacy.

Convolvulus genus is a representative of the family of Convolvulaceae. Convolvulus plants are broadly distributed all over the world and has been used for many centuries as herbal medicine. Convolvulus genus contains various phytochemicals such as flavonoids, alkaloids, carbohydrates, phenolic compounds, mucilage, unsaturated sterols or terpenes, resin, tannins, lactones, and proteins. This review highlights the phytochemical composition, antimicrobial and antioxidant activities, application as food preservative, traditional medicine use, anticancer activities, and clinical effectiveness in human of Convolvulus plants. All the parts of Convolvulus plants possess therapeutic benefits; preliminary pharmacological data validated their use in traditional medicine. However, further preclinical and clinical experiments are warranted before any application in human health.

Unravelling Disorder Effects on Thermoelectric Properties of Semicrystalline Polymers in a Wide Range of Doping Levels.

Thermoelectric (TE) performance of a specific semicrystalline polymer is studied experimentally only in a limited range of doping levels with molecular doping methods. The doping level is finely controlled via in situ electrochemical doping in a wide range of carrier concentrations with an electrolyte ([PMIM]+ [TFSI]- )-gated organic electrochemical transistor system. Then, the charge generation/transport and TE properties of four p-type semicrystalline polymers are analyzed and their dynamic changes of crystalline morphologies and local density of states (DOS) during electrochemical doping are compared. These polymers are synthesized based on poly[(2,5-bis(2-alkyloxy)phenylene)-alt-(5,6-difluoro-4,7-di(thiophene-2-yl)benzo[c][1,2,5]thiadiazole)] by varying side chains: With oligoethylene glycol (OEG) substituents, facile p-doping is achieved because of easy penetration of TFSI- ions into the polymer matrix. However, the charge transport is hindered with longer OEG chains length because of the enhanced insulation. Therefore, with the shortest OEG substituents the electrical conductivity (30.1 S cm-1 ) and power factor (2.88 µW m-1 K-2 ) are optimized. It is observed that all polymers exhibit p- to n-type transition in Seebeck coefficients in heavily doped states, which can be achieved by electrochemical doping. These TE behaviors are interpreted based on the relation between the localized DOS band structure and molecular packing structure during electrochemical doping.

Anionic Conjugated Polyelectrolyte as a Semiconducting Additive for Efficient and Stable Perovskite Solar Cells.

Perovskite defects are a major hurdle in the efficiency and stability of perovskite solar cells (PSCs). While various defect passivation materials have been explored, most are insulators that hinder charge transport. This study investigates the potential of two different π-conjugated polyelectrolytes (CPEs), MPS2-TEA and PCPDTBT2-TMA, as semiconducting additives in PSCs. The CPEs differ in electrical conductivity, offering a unique approach to bridge defect mitigation and charge carrier transport. Unlike previous uses of CPEs mainly as interlayers or charge transport layers, we explore their direct effect on defect passivation within a perovskite layer. Secondary ion microscopy reveals the even distribution of CPEs within the perovskite layer and their efficient defect passivation potential is studied through various spectroscopic analyses. Comparing MPS2-TEA and PCPDTBT2-TMA, we find MPS2-TEA to be superior in defect passivation. The highly conductive nature of PCPDTBT2-TMA due to self-doping diminishes its defect passivation ability. The negative sulfonate groups in the side chains of PCPDTBT2-TMA stabilize polarons, reducing defect passivation capability. Finally, the PSCs with MPS2-TEA achieve remarkable power conversion efficiencies (PCEs) of 22.7% for 0.135 cm2 and 20.0% for large-area (1 cm2) cells. Furthermore, the device with MPS2-TEA maintained over 87.3% of initial PCE after 960 h at continuous 1-sun illumination and 89% of PCE after 850 h at 85 °C in a nitrogen glovebox without encapsulation. This highlights CPEs as promising defect passivation additives, unlocking potential for improved efficiency and stability not only in PSCs but also in wider applications.

Completely foldable electronics based on homojunction polymer transistors and logics.

An increase in the demand for completely foldable electronics has motivated efforts for the development of conducting polymer electrodes having extraordinary mechanical stability. However, weak physical adhesion at intrinsic heterojunctions has been a challenge in foldable electronics. This paper reports the completely foldable polymer thin-film transistors (PTFTs) and logic gate arrays. Homojunction-based PTFTs were fabricated by selectively doping p-type diketopyrrolopyrrole-based semiconducting polymer films with FeCl3 to form source/drain electrodes. The doping process caused a gradual work function change with depth, which promoted charge injection to semiconducting regions and provided a low contact resistance. In addition, the interfacial adhesion in the PTFTs was improved by interfacial cross-linking between adjacent component layers. The electrical performance of the resulting PTFTs was maintained without noticeable degradation even after extreme folding, suggesting that the proposed fabrication strategy can further be applied to various semiconducting polymers for the realization of foldable electronics.

Closely Packed Polypyrroles via Ionic Cross-Linking: Correlation of Molecular Structure-Morphology-Thermoelectric Properties.

A series of ionically interconnected polypyrrole (PPy) films are fabricated through two-monomer-connected-precursor polymerization by varying diacid linkers, thereby significantly influencing the crystalline morphology and electrical properties. The structure obtained using 1,5-napthalenedisulfonic acid (PPy-Nap) as a fused aromatic linker exhibits a higher electrical conductivity (∼78 S cm-1) than that (6.7 S cm-1) without a linker (PPy-ref). Cryogenic conductivity measurements reveal that the percolation carrier transport barrier of PPy-Nap is significantly smaller than that of PPy-ref, and the calculated carrier mobility of PPy-Nap is ∼5 times higher compared to PPy-ref. The carrier transport characteristics show a good agreement with morphological data by 2D grazing-incidence X-ray scattering. All PPys have similar doped charge carrier concentrations and, thus, similar Seebeck coefficients (5-8 µV K-1) but very different electrical conductivities. Consequently, PPy-Nap exhibits a higher power factor than that of PPy-ref (0.21 vs 0.043 µW m-1 K-2). The results show that the trade-off relationship between the Seebeck coefficient and electrical conductivity can be overcome by improving crystalline morphology and carrier transport. Thus, both the electrical conductivities and thermoelectric power factors can be improved with maintaining the Seebeck coefficients by enhancing the ordered conductive domains and carrier mobility while maintaining the doping level.