Application of IRI Visualization to Terahertz Vibrational Spectroscopy of Hydroxybenzoic Acid Isomers.

The characteristic absorption spectra of three positional isomers of hydroxybenzoic acid are measured using a terahertz time-domain spectroscopy system (THz-TDS) in the 0.6-2.0 THz region at room temperature. Significant differences in their terahertz spectra are discovered, which indicates that THz-TDS is an effective means to identify positional isomers. In order to simulate their spectra, the seven molecular clusters of 2-, 3-, and 4-hydroxybenzoic acid (2-, 3-, and 4-HA) are calculated using the DFT-D3 method. Additionally, the potential energy distribution (PED) method is used to analyze their vibration modes. The analysis indicates that the vibration modes of 2-HA are mainly out-of-plane angle bending and bond angle bend in plane. The vibration modes of 3-HA are mainly bond length stretch and dihedral angle torsion. The vibration modes of 4-HA are mainly bond angle bend in plane and dihedral angle torsion. Interaction region indicator (IRI) analysis is used to visualize the location and type of intermolecular interactions in 2-, 3-, and 4-HA crystals. The results show that the weak interaction type of 2-, 3-, and 4-HA is dominated by van der Waals (vdW) interaction. Therefore, we can confirm that terahertz spectroscopy detection technology can be used as an effective means to identify structural isomers and detect the intermolecular interactions in these crystals. In addition, it can explain the absorption mechanism of terahertz waves interacting with matter.

LncRNA TINCR improves cardiac hypertrophy by regulating the miR-211-3p-VEGFB-SDF-1α-CXCR4 pathway.

Cardiac hypertrophy is a common cardiovascular disease that is found worldwide and is characterized by heart enlargement, eventually resulting in heart failure. Exploring the regulatory mechanism of cardiac hypertrophy is beneficial for understanding its pathogenesis and treatment. In our study, we have showed TINCR was downregulated and miR-211-3p was upregulated in TAC- or Ang II-induced models of cardiac hypertrophy. Dual luciferase and RIP assays revealed that TINCR served as a competitive endogenous RNA (ceRNA) for miR-211-3p. Then, we observed that knockdown of miR-211-3p alleviated TAC- or Ang II-induced cardiac hypertrophy both in vivo and in vitro. Mechanistically, we demonstrated that miR-211-3p directly targeted VEGFB and thus regulated the expression of SDF-1α and CXCR4. Rescue assays further confirmed that TINCR suppressed the progression of cardiac hypertrophy by competitively binding to miR-211-3p, thereby enhancing the expression of VEGFB and activating the VEGFB-SDF-1α- CXCR4 signal. Furthermore, overexpression of TINCR suppressed TAC-induced cardiac hypertrophy in vivo by targeting miR-211-3p-VEGFB-SDF-1α- CXCR4 signalling. In conclusion, our research suggests that LncRNA TINCR improves cardiac hypertrophy by targeting miR-211-3p, thus relieving its suppressive effects on the VEGFB-SDF-1α-CXCR4 signalling axis. TINCR and miR-211-3p might act as therapeutic targets for the treatment of cardiac hypertrophy.

Catheter-Based Radiofrequency Renal Sympathetic Denervation Decreases Left Ventricular Hypertrophy in Hypertensive Dogs.

This study explored the effects of renal sympathetic denervation (RDN) on hyperlipidity-induced cardiac hypertrophy in beagle dogs. Sixty beagles were randomly assigned to the control group, RDN group, or sham-operated group. The control group was fed with a basal diet, while the other two groups were given a high-fat diet to induce model hypertension. The RDN group underwent an RDN procedure, and the sham-operated group underwent only renal arteriography. At 1, 3, and 6 months after the RDN procedure, the diastolic blood pressure (DBP) and systolic blood pressure (SBP) levels were markedly decreased in the RDN group relative to the sham group (P < 0.05). After 6 months, serum norepinephrine (NE) and angiotensin II (AngII), as well as left ventricular levels, in the RDN group were statistically lower than those in the sham group (P < 0.05). Also, the left ventricular mass (LVM) and left ventricular mass index (LVMI) were significantly decreased, while the E/A peak ratio was drastically elevated (P < 0.05). Pathological examination showed that the degree of left ventricular hypertrophy and fibrosis in the RDN group was statistically decreased relative to those of the sham group and that the collagen volume fraction (CVF) and perivascular circumferential collagen area (PVCA) were also significantly reduced (P < 0.05). Renal sympathetic denervation not only effectively reduced blood pressure levels in hypertensive dogs but also reduced left ventricular hypertrophy and myocardial fibrosis and improved left ventricular diastolic function. The underlying mechanisms may involve a reduction of NE and AngII levels in the circulation and myocardial tissues, which would lead to the delayed occurrence of left ventricular remodeling.

Utilizing an Animal Model to Identify Brain Neurodegeneration-Related Biomarkers in Aging.

Glycine N-methyltransferase (GNMT) regulates S-adenosylmethionine (SAMe), a methyl donor in methylation. Over-expressed SAMe may cause neurogenic capacity reduction and memory impairment. GNMT knockout mice (GNMT-KO) was applied as an experimental model to evaluate its effect on neurons. In this study, proteins from brain tissues were studied using proteomic approaches, Haemotoxylin and Eosin staining, immunohistochemistry, Western blotting, and ingenuity pathway analysis. The expression of Receptor-interacting protein 1(RIPK1) and Caspase 3 were up-regulated and activity-dependent neuroprotective protein (ADNP) was down-regulated in GNMT-KO mice regardless of the age. Besides, proteins related to neuropathology, such as excitatory amino acid transporter 2, calcium/calmodulin-dependent protein kinase type II subunit alpha, and Cu-Zn superoxide dismutase were found only in the group of aged wild-type mice; 4-aminobutyrate amino transferase, limbic system-associated membrane protein, sodium- and chloride-dependent GABA transporter 3 and ProSAAS were found only in the group of young GNMT-KO mice and are related to function of neurons; serum albumin and Rho GDP dissociation inhibitor 1 were found only in the group of aged GNMT-KO mice and are connected to neurodegenerative disorders. With proteomic analyses, a pathway involving Gonadotropin-releasing hormone (GnRH) signal was found to be associated with aging. The GnRH pathway could provide additional information on the mechanism of aging and non-aging related neurodegeneration, and these protein markers may be served in developing future therapeutic treatments to ameliorate aging and prevent diseases.

Brazing Coupling Performance of Piezoelectric Waveguide Transducers for the Monitoring of High Temperature Components.

Piezoelectric waveguide transducers possess great potential for the online monitoring of high temperature critical components, in order to improve their operational safety. Due to the use of a waveguide bar, the sensory device is not susceptible to high temperature environments, which enables the long-term service of the piezoelectric transducers. However, the coupling between the waveguide bar and the high-temperature component has been proven to be the most important part of the monitoring system. In order to effectively transmit waves through the junction of the waveguide bar and the monitoring target, it is necessary to research a reliable coupling method to connect the waveguide transducers with the host structure. In the present research, the feasibility of brazing coupling for wave propagation through the junction was investigated through experiments. Piezoelectric waveguide transducers were welded using various kinds of brazing filler metals. The experimental results indicate that the coupling effects of the brazing welding depend on the filler metals. At the same time, some filler metals for the effective coupling of the transducer and the target monitoring component were identified. The brazing coupling method was verified that it can non-dispersively and effectively propagate waves into the host structure with much better reliability than the conventional dry coupling approach. Moreover, the high-temperature experimental results show that the brazing-coupled waveguide bar system can work reliably and stably in high temperatures at 300 °C for a long time. This work strives to pave a solid foundation for the application of piezoelectric waveguide transducers for the structural health monitoring of high temperature critical components.

Optimal Design Methodology of Tapered Waveguide Transducers for Thickness Monitoring.

For the purpose of providing transducers for long-term monitoring of wall thinning of critical pressure equipment in corrosion or high temperature environments, the optimal design methodology for tapered waveguide units was proposed in the present study. Firstly, the feasibility of the quasi-fundamental shear horizontal (SH0*) wave propagating in the tapered waveguide units was analyzed via numerical simulations, and the transmitting limitations of the non-dispersive SH0* wave were researched. Secondly, several tapered waveguide transducers with varying cross-sections to transmit pure SH0* wave were designed according to the numerical results. Experimental investigations were carried out, and the results were compared with waveguide transducers with a prismatic cross-section. It was found that the tapered waveguide units can transmit non-dispersive shear horizontal waves and suppress the wave attenuation at the same time. The experimental results agreed very well with the numerical simulations. Finally, high-temperature experiments were carried out, and the reliability of thickness measuring by the tapered waveguide transducers was validated. The errors between the measured and the true thicknesses were small. This work paves a solid foundation for the optimal design of tapered waveguide transducers for thickness monitoring of equipment in harsh environments.

Correlations of Circadian Rhythm Disorder of Blood Pressure with Arrhythmia and Target Organ Damage in Hypertensive Patients.

BACKGROUND The aim of this study was to investigate the correlations of circadian rhythm disorder of blood pressure with arrhythmia and target organ damage in hypertensive patients. MATERIAL AND METHODS A total of 198 patients admitted and treated in our hospital from May 2018 to April 2019 were selected to receive 24-h ambulatory blood pressure monitoring. The nighttime blood pressure decrease rate is 0-10% in people with normal circadian rhythm of blood pressure. In the present study, we divided patients into a normal circadian rhythm group (normal circadian rhythm of blood pressure, n=132) and a circadian rhythm disorder group (circadian rhythm disorder of blood pressure, n=66) according to the circadian rhythm of blood pressure. The systolic blood pressure (SBP), diastolic blood pressure (DBP), and mean pulse pressure (PP) were observed, and dynamic electrocardiography was performed to observe the status of arrhythmia. Finally, the degree of damage to target organs such as heart, brain, and kidney was compared. RESULTS The circadian rhythm disorder group had remarkably higher daytime SBP (d-SBP), daytime DBP (d-DBP), and daytime PP (d-PP) but clearly lower nighttime SBP (n-SBP), nighttime DBP (n-DBP), and nighttime PP (n-PP) than in the normal circadian rhythm group (P<0.0001). The detection rate of arrhythmia and the degree of target organ damage were clearly higher in the circadian rhythm disorder group compared with the normal circadian rhythm group (P<0.0001). Moreover, the incidence rates of heart disease, cerebrovascular disease, and nephropathy were higher in the circadian rhythm disorder group than in the normal circadian rhythm group (P<0.0001). CONCLUSIONS The circadian rhythm disorder of blood pressure in hypertensive patients probably increases the risk of arrhythmia and worsens the target organ damage, so attention should be paid to the adjustment of disordered blood pressure rhythm in hypertensive patients in clinical practice.

Critical Excitation of the Fundamental Quasi-Shear Mode Wave in Waveguide Bars for Elevated Temperature Applications.

The safety of critical pressure equipment in elevated temperature is increasingly important. Moreover, the on-line monitoring method is potentially useful to improve their safety. A waveguide bar system can enable monitoring of critical equipment working in elevated temperature using reliable ultrasonic technology. Among the waveguide bar system, the matching mechanism of the transducer and the waveguide bar is crucial to propagate the pure fundamental quasi-shear mode (shorten for SH0*) wave. In the present research, the loading line sources that can excite pure SH0* wave are investigated and the anti-plane shear loading source is selected. The critical values about the geometric dimensions of the junctions between the piezoelectric transducer and the waveguide bar are explored by simulation and experiments. On the condition that the excitation sources satisfy the critical values, the loading can be approximated to an anti-plane shear one to excite the pure SH0* wave. Some waveguide bar systems are designed based on the simulated critical values and some experiments at high temperature are carried out. The experimental results verify that the designed waveguide bar systems can excite the pure SH0* wave at elevated temperatures, which verify the reliability of the simulated critical results.

Renal simplicity denervation reduces blood pressure and renal injuries in an obesity-induced hypertension dog model.

This study aimed to investigate the effects of renal sympathetic denervation (RDN) on blood pressure, renal function, and renal tissue pathological changes in obesity-induced hypertensive dogs. Thirty-two beagle dogs (10-12 months) were randomized to the control (n=10) and model groups (n=22). High-fat diet (HFD) was used to establish the obesity-induced hypertensive model. After 3 months of HFD, 20 animals with successfully induced hypertension were randomized to the RDN (n=10) and sham groups (n=10). Renal artery angiography, body weight, blood pressure, heart rate (HR), and blood and urine biochemistry were determined 1, 3 and 6 months after surgery. Models were killed 6 months after surgery. Pathological changes in the renal artery and renal tissue were assessed. The HFD group had significantly (P<.05) increased body weight, HR, and blood pressure, and higher levels of urine albumin, serum noradrenaline, and angiotensin II compared with controls. After RDN, blood pressure was decreased compared with baseline and the sham group (P<.05). In the RDN group, examination of the renal artery and renal tissue showed intact intima of renal artery in the surgical area, renal sympathetic nerve degeneration, necrosis, and dissolution, and widened space between nerve fibres. Hypertension-induced renal pathological changes were mild to moderate in the RDN group, but severe in the sham group. The control group had normal glomerular structure. In conclusion, RDN can effectively lower blood pressure in obesity-induced hypertensive dogs, as well as hypertension-induced renal pathological changes.

An Improved Metal-Packaged Strain Sensor Based on A Regenerated Fiber Bragg Grating in Hydrogen-Loaded Boron-Germanium Co-Doped Photosensitive Fiber for High-Temperature Applications.

Local strain measurements are considered as an effective method for structural health monitoring of high-temperature components, which require accurate, reliable and durable sensors. To develop strain sensors that can be used in higher temperature environments, an improved metal-packaged strain sensor based on a regenerated fiber Bragg grating (RFBG) fabricated in hydrogen (H2)-loaded boron-germanium (B-Ge) co-doped photosensitive fiber is developed using the process of combining magnetron sputtering and electroplating, addressing the limitation of mechanical strength degradation of silica optical fibers after annealing at a high temperature for regeneration. The regeneration characteristics of the RFBGs and the strain characteristics of the sensor are evaluated. Numerical simulation of the sensor is conducted using a three-dimensional finite element model. Anomalous decay behavior of two regeneration regimes is observed for the FBGs written in H2-loaded B-Ge co-doped fiber. The strain sensor exhibits good linearity, stability and repeatability when exposed to constant high temperatures of up to 540 °C. A satisfactory agreement is obtained between the experimental and numerical results in strain sensitivity. The results demonstrate that the improved metal-packaged strain sensors based on RFBGs in H2-loaded B-Ge co-doped fiber provide great potential for high-temperature applications by addressing the issues of mechanical integrity and packaging.

Exosomes for hair growth and regeneration.

Exosomes are lipid bilayer vesicles, 30-200 nm in diameter, that are produced by cells and play essential roles in cell-cell communication. Exosomes have been studied in several medical fields including dermatology. Hair loss, a major disorder that affects people and sometimes causes mental stress, urgently requires more effective treatment. Because the growth and cycling of hair follicles are governed by interactions between hair follicle stem cells (HFSCs) and dermal papilla cells (DPCs), a better understanding of the mechanisms responsible for hair growth and cycling through exosomes may provide new insights into novel treatments for hair loss. In this review, we focused on the comprehensive knowledge and recent studies on exosomes in the field of hair development and regeneration. We classified exosomes of several cellular origins for the treatment of hair loss. Exosomes and their components, such as microRNAs, are promising drugs for effective hair loss treatment.

Nacre-like surface nanolaminates enhance fatigue resistance of pure titanium.

Fatigue failure is invariably the most crucial failure mode for metallic structural components. Most microstructural strategies for enhancing fatigue resistance are effective in suppressing either crack initiation or propagation, but often do not work for both synergistically. Here, we demonstrate that this challenge can be overcome by architecting a gradient structure featuring a surface layer of nacre-like nanolaminates followed by multi-variant twinned structure in pure titanium. The polarized accommodation of highly regulated grain boundaries in the nanolaminated layer to cyclic loading enhances the structural stability against lamellar thickening and microstructure softening, thereby delaying surface roughening and thus crack nucleation. The decohesion of the nanolaminated grains along horizonal high-angle grain boundaries gives rise to an extraordinarily high frequency (≈1.7 × 103 times per mm) of fatigue crack deflection, effectively reducing fatigue crack propagation rate (by 2 orders of magnitude lower than the homogeneous coarse-grained counterpart). These intriguing features of the surface nanolaminates, along with the various toughening mechanisms activated in the subsurface twinned structure, result in a fatigue resistance that significantly exceeds those of the homogeneous and gradient structures with equiaxed grains. Our work on architecting the surface nanolaminates in gradient structure provides a scalable and sustainable strategy for designing more fatigue-resistant alloys.

Evaluation of bidirectional causal association between cardiovascular diseases and pneumonia: A Mendelian randomization study.

AIMS: Observational evidence suggests a bidirectional relationship between cardiovascular diseases (CVDs) and pneumonia. However, the causality between CVDs and pneumonia remains undetermined. Thus, we aimed to investigate the bidirectional causality between CVDs and pneumonia using Mendelian randomization (MR) analysis. METHODS: Global genetic correlation analysis and bidirectional two-sample MR analysis were performed to infer the genetic correlation and causality between CVDs and pneumonia by using genome-wide association study (GWAS) summary data from GWAS meta-analysis study, FinnGen or UK Biobank consortium. Post-hoc power calculation was conducted to assess the power for detecting the causality. RESULTS: The linkage disequilibrium score regression analysis suggested a positive significant genetic correlation between CVDs and pneumonia. In the MR analysis, only genetically predicted ischemic stroke was causally associated with any pneumonia (odds ratio [OR]: 1.119, 95% confidence interval [CI]: 1.031-1.393), bacterial pneumonia (OR: 1.251, 95% CI: 1.032-1.516), and pneumococcal pneumonia (OR: 1.308, 95% CI: 1.093-1.565), but the causality was attenuated to non-significance after adjusting for deep venous thrombosis. However, the causal effects of pneumonia on CVDs were not detected. Post-hoc power calculations supported strong power (more than 80%) to detect the causality. CONCLUSIONS: Ischemic stroke is causally associated with an increased risk of pneumonia, but there is no evidence for the causal effect of pneumonia on CVDs. Our findings have important implications as they provide further support for the thrombosis risk screening as a strategy to reduce the incidence of pneumonia in patients with ischemic stroke.

This Mendelian randomization analysis aimed to investigate the bidirectional causality between cardiovascular diseases and pneumonia. Our findings support the causal association of ischemic stroke on pneumonia, but indicate no evidence for the causal effects of pneumonia on cardiovascular diseases. The causal association of ischemic stroke on pneumonia was revealed to rely on deep venous thrombosis, which provided further support for the thrombosis risk screening as a strategy to reduce the incidence of pneumonia in patients with ischemic stroke.

Development of on-line monitoring systems for high temperature components in power plants.

To accurately detect deformation and extend the component life beyond the original design limits, structural safety monitoring techniques have attracted considerable attention in the power and process industries for decades. In this paper an on-line monitoring system for high temperature pipes in a power plant is developed. The extension-based sensing devices are amounted on straight pipes, T-Joints and elbows of a main steam pipeline. During on-site monitoring for more than two years, most of the sensors worked reliably and steadily. However, the direct strain gauge could not work for long periods because of the high temperature environment. Moreover, it is found that the installation and connection of the extensometers can have a significant influence on the measurement results. The on-line monitoring system has a good alarming function which is demonstrated by detecting a steam leakage of the header.

Collaborative Enhancement of Humidity Sensing Performance by KCl-Doped CuO/SnO2 p-n Heterostructures for Monitoring Human Activities.

In this study, a high-performance humidity sensor based on KCl-doped CuO/SnO2 p-n heterostructures was fabricated by a ball milling-roasting method. The morphology and nanostructure of the fabricated KCl-CuO/SnO2 composite were characterized by scanning electron microscopy, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and nitrogen sorption analysis. The results showed that the humidity sensor had a high sensitivity of 194 kΩ/%RH, short response and recovery times of 1.0 and 1.5 s, a low hysteresis value, and good repeatability. The energy band structure and complex impedance spectrum of the KCl-CuO/SnO2 composite indicated that the excellent humidity sensing performance originated from the ionic conductivity of KCl, the formation of heterojunctions, the change in the Schottky barrier height, and the depletion of electronic depletion layers. The KCl-CuO/SnO2 sensor has great potential in respiratory monitoring, noncontact sensing of finger moisture, and environmental monitoring.

Ultra-high performance humidity sensor enabled by a self-assembled CuO/Ti3C2T X MXene.

An ultra-high performance humidity sensor based on a CuO/Ti3C2T X MXene has been investigated in this work. The moisture-sensitive material was fabricated by a self-assembly method. The morphology and nanostructure of the fabricated CuO/Ti3C2T X composites were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectra. The humidity sensing abilities of the CuO/Ti3C2T X sensor in the relative humidity (RH) range from 0% to 97% were studied. The results showed that the humidity sensor had a high sensitivity of 451 kΩ/% RH, short response time (0.5 s) and recovery time (1 s), a low hysteresis value, and good repeatability. The CuO/Ti3C2T X sensor exhibited remarkable properties in human respiration rate monitoring, finger non-contact sensing, and environmental detection. The moisture-sensitive mechanism of CuO/Ti3C2T X was discussed. The fabricated CuO/Ti3C2T X showed great potential in the application of moisture-sensitive materials for ultra-high-performance humidity sensors.

[Proapoptotic effect of angiotensin II on renal tubular epithelial cells and protective effect of Cordyceps sinensis].

OBJECTIVE: To investigate the mechanism of the protective effect of Cordyceps sinensis (C. sinensis) on the apoptosis of cultured NRK-52E induced by angiotension II (AngII). METHODS: NRK-52E cells were incubated with C. sinensis (0, 5, 10, 20, and 40 mg/L) and 10(-8) mol/ L AngII for 24, 48, 72 h. The optimal concentration of C. sinensis was selected. Either NRK-52E cells were incubated with different doses of AngII (0, 10(-12), 10(-10), 10(-8), and 10(-6) mol/L) for 24 h, or with 10(-8) mol/L AngII for 24, 48, and 72 h, to observe the effect of AngII on the apoptosis of NRK- 52E cells. The optimal concentration and time of AngII were selected. In another experiment cells were divided into 5 groups: a control, AngII (10(-8) mol/L), AngII (10(-8) mol/L)+ C. sinensis (40 mg/ L), Ang II (10(-8) mol/L)+ fosinopril (10(-5) mmol/L), and Ang II (10(-8) mol/L)+ fosinopril (10(-5) mol/ L)+C. sinensis (40 mg/L). MTT assay was used to test the changes in the proliferation of NRK-52E cultured with different concentration of C. sinensis for 24, 48, 72 h. The Annecxin V-FITC and PI stainings were applied to detect the apoptosis rate induced by AngII by flow cytometer (FCM) and to determine the eddects of C. sinensis. The activity of caspase-3 was assayed by spectrophotometry. RESULTS: Certain concentrations of C. sinensis (10-40 mg/L) promoted the proliferation of NRK- 52E cells inhibited by AngII(P<0.05). AngII induced the apoptosis of NRK-52E in a dose and timedependent manner, accompanied with increased activity of caspase-3 (P<0.05). C. sinensis partially suppressed the apoptosis of NRK-52E induced by AngII, and declined the activity of caspase-3 (P<0.05). No significant difference was shown as between the fosinopril group and the fosinopril+C. sinensis group (P>0.05). CONCLUSION: C. sinensis can suppress the apoptosis of NRK-52E by AngII, and the protective effect of C. sinensis may be inhibiting the activation of caspase-3 during the AngII-induced apoptosis of NRK-52E.

A diagnostic test: combined detection of heparin-binding protein, procalcitonin, and C-reactive protein to improve the diagnostic accuracy of bacterial respiratory tract infections.

Background: Respiratory tract infection (RTI) is one of the most common diseases worldwide, and its incidence is rising year by year due to environmental pollution. Sputum culture remains the gold standard for RTI diagnosis, but its performance is limited by difficulties related to the sampling and testing of the sputum specimens. Heparin-binding protein (HBP), procalcitonin (PCT), and C-reaction protein (CRP) are Inflammatory markers. They have the advantage of being fast, accurate and reproducible, but limited by their sensitivity and specificity. We explored the clinical value of the combined detection of them in the diagnosis of bacterial RTIs. Methods: Patients who fulfilled the inclusion criteria were selected as the case group, healthy age- and sex-matched subjects were enrolled as a control group. The subjects' HBP, PCT, and CRP levels were detected. The case group was further divided into two groups according to the bacterial culture results, and the differences in the markers were statistically analyzed. The receiver operating characteristic (ROC) curves were drawn, and the areas under the ROC curve (AUCs) were calculated to analyze the diagnostic values of each marker and their combination in parallel for bacterial RTIs. Results: The plasma HBP, PCT, and CRP levels of patients in the bacterial and non-bacterial infection groups were significantly higher than those of patients in the healthy control group, and were positively correlated to the severity of the disease. for HBP with an AUC of 0.785 [95% confidence interval (CI): 0.686-0.884], a sensitivity of 0.821, a specificity of 0.771; PCT with an AUC of 0.767 (95% CI: 0.664-0.870), a sensitivity of 0.773, a specificity of 0.791, and CRP with an AUC of 0.748 (95% CI: 0.642-0.854), a sensitivity of 0.839, a specificity of 0.696 in the bacterial and non-bacterial infection groups. The combined detection of HBP + CRP had the optimal diagnostic performance, with an AUC of 0.797 (95% CI: 0.698-0.895; P<0.001), a sensitivity of 0.809, a specificity of 0.800. Conclusions: The combined detection of HBP and CRP is valuable for diagnosing bacterial RTIs and may guide the development of reasonable treatment protocols in clinical settings.

Effects of the PI3K/Akt signaling pathway on the hair inductivity of human dermal papilla cells in hair beads.

Dermal papilla cells (DPCs), which play a central role in the regulation of hair follicle development and hair growth, are among the most promising cell sources for hair regenerative medicine. However, a critical issue in the use of DPCs is the immediate loss of hair inducing functions in typical two-dimensional (2D) culture. We have previously demonstrated that when DPCs are encapsulated in drops of collagen gel (named hair beads, HBs), the density of collagen and cells is concentrated >10-fold during 3 d of culture through the spontaneous constriction of the drops, leading to efficient hair follicle regeneration upon transplantation. However, the mechanisms responsible for the activation of the hair-inducing functions of DPCs have been poorly elucidated. Here, transcriptome comparisons of human DPCs in HB culture and in typical 2D culture revealed that the phosphoinositide 3-kinase and Akt (PI3K/Akt) signaling pathway was significantly upregulated in HB culture. Inhibition of the PI3K/Akt signaling pathway decreased the hair-inducing capability of DPCs in HBs, while the activation of the PI3K/Akt signaling pathway using an activator improved trichogenous gene expression of DPCs in 2D culture. These results suggest that the PI3K/Akt signaling pathway is crucial for the maintenance and restoration of hair inductivity of DPCs. HB culture and/or activators of the PI3K/Akt signaling pathway could be a promising strategy for preparing DPCs for hair regenerative medicine.

Highly efficient solar-absorber composite material based on tetrapyridylporphyrin for water evaporation and thermoelectric power generation.

Photothermal materials based on organic small molecules have the characteristics of structural diversity and easy modification for solar-driven water evaporation and power generation technology. However, there still exist limitations, such as the utilization of solar energy and photostability. Therefore, it is the focus of current research to design organic photothermal materials with excellent photothermal stability, strong solar absorption capacity, and high photothermal conversion efficiency. Herein, photothermal conversion materials based on tetrapyridylporphyrin (TPyP) is studied, which possesses polypyrrole macrocyclic framework (18π electrons), which makes it exhibit strong absorption in the 300-800 nm region with high photothermal conversion. The interfacial-heating evaporation system based on polyurethane (PU) foam loaded with TPyP was prepared, whose solar-to-vapor conversion efficiency and vapor evaporation rate of PU + TPyP foam solar energy reached 56% and 0.81 kg m-2 h-1, respectively. In addition, TPyP-loaded solar evaporator equipped with abundant microchannels for water flow are integrated with thermoelectric devices, thus achieving an evaporation rate and voltage as high as 0.69 kg m-2 h-1 and 60 mV under 1 kW m-2 solar irradiation, respectively. The successful application of TPyP in water evaporation and power generation effectively addresses the difficulties faced in the process of using organic small molecule photothermal materials to solve the energy crisis.