RESUMO
The treatment of various organic pollutants from industrial wastewater using bio-based materials has gained significant attention owing to their excellent properties such as low-cost, eco-friendly, non-toxic, and biodegradability. In this perspective, casein (Cn), a protein-based biopolymer, was extracted from the cow milk as a low-cost adsorbent, and the adsorption performances were determined for the pristine Cn. The adsorbent was employed for the removal of two different classes of targeted pollutant anionic dyes such as Congo red (CR), Eriochrome Black T (EBT), Eosin Y (EY), and pharmaceutical waste i.e., diclofenac sodium (DS) and displayed better adsorption performances with the maximum adsorption capacity of 85.54, 31.72, 70.42 and 358.42 mg g-1 respectively. The interactions between Cn and pollutants are mainly ascribed to the electrostatic interaction, hydrogen bonding, hydrophobic interaction, and π-π interactions. Furthermore, to validate with realistic application the adsorbent proved with an excellent removal efficiency of 91.43% for fabric whitener i.e., Ujala Supreme®. These obtained results suggest that the Cn could be the potential adsorbent to effectively eliminate toxic pollutants from the aqueous solutions.
Assuntos
Poluentes Ambientais , Poluentes Químicos da Água , Corantes/análise , Diclofenaco , Caseínas , Adsorção , Biopolímeros , Água , Poluentes Químicos da Água/análise , Cinética , Concentração de Íons de HidrogênioRESUMO
In 2019, a worldwide pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) emerged. SARS-CoV-2 is the deadly microorganism responsible for coronavirus disease 2019 (COVID-19), which has caused millions of deaths and irreversible health problems worldwide. To restrict the spread of SARS-CoV-2, accurate detection of COVID-19 is essential for the identification and control of infected cases. Although recent detection technologies such as the real-time polymerase chain reaction delivers an accurate diagnosis of SARS-CoV-2, they require a long processing duration, expensive equipment, and highly skilled personnel. Therefore, a rapid diagnosis with accurate results is indispensable to offer effective disease suppression. Nanotechnology is the backbone of current science and technology developments including nanoparticles (NPs) that can biomimic the corona and develop deep interaction with its proteins because of their identical structures on the nanoscale. Various NPs have been extensively applied in numerous medical applications, including implants, biosensors, drug delivery, and bioimaging. Among them, point-of-care biosensors mediated with gold nanoparticles (GNPSs) have received great attention due to their accurate sensing characteristics, which are widely used in the detection of amino acids, enzymes, DNA, and RNA in samples. GNPS have reconstructed the biomedical application of biosensors because of its outstanding physicochemical characteristics. This review provides an overview of emerging trends in GNP-mediated point-of-care biosensor strategies for diagnosing various mutated forms of human coronaviruses that incorporate different transducers and biomarkers. The review also specifically highlights trends in gold nanobiosensors for coronavirus detection, ranging from the initial COVID-19 outbreak to its subsequent evolution into a pandemic.
RESUMO
The heavy metal contaminant arsenic exist in the form of arsenite (As(III)) and arsenate (As(V)) ions. These ions are highly carcinogenic that are usually present in the ground water. To date, most of the designed polymer inclusion membrane (PIM) involved only about separation without differentiating the oxidation states. Thus, there is a research gap on separation of element with different oxidation states. Thus, this study addresses such research gap which have been not explored previously. To extract such ions from water, the present study involves fabrication of PIM by varying the compositions of the base polymer, carrier and plasticizer. Also effect of the strip solution, and transport properties were studied. High performance membrane was obtained with 50% (w/w) Aliquat 336 and 50% (w/w) Cellulose triacetate (CTA). The production of 1 m2 of PIM may cost approximately 0.08-0.16$. Also, we have combined the separation capacity of polymer inclusion membrane (PIM) with the sensitivity and elemental detection using atomic absorption spectrometry (AAS) to detect and separate As(III) and As(V). AAS is limited to detecting only elemental arsenic (As) and does not distinguish between As(III) and As(V). Further, to address such limitations in this current study we were able to separate As(V) from As(III) within 5 h. In addition, to provide sole solution a device was fabricated to extract As(V) in the field studies which displayed outstanding efficiency of 99.7 ± 0.2%. The extracted samples was tested in AAS to differentiate between oxidation states of the arsenic species and these important results are supportive in finding out the redox potential of water and for other geochemical explorations.
Assuntos
Arsênio , Polímeros , Polímeros/química , Membranas Artificiais , Água , ÍonsRESUMO
Recently, 2D layered transition metal dichalcogenides (TMDCs) with their ultrathin sheet nanostructure and diversified electronic structure have drawn attention for various advanced applications to achieve high-performance parameters. Unique 2D TMDCs mainly comprise transition metal and chalcogen element where chalcogen element layers sandwich the transition metal element layer. In such a case, various properties can be enhanced and controlled depending on the targeted application. Among manipulative 2D TMDCs, tungsten disulphide (WS2) is one of the emerging nano-system due to its fascinating properties in terms of direct band gap, higher mobility, strong photoluminescence, good thermal stability, and strong magnetic field interaction. The advancement in characterization techniques, especially scattering techniques, can help in study of opto-electronic properties of 2D TMDCs along with determination of layer variations and investigation of defect. In this review, the fabrication and applications are well summarized to optimize an appropriate WS2-TMDCs assembly according to focused field of research. Here, the scientific investigations on 2D WS2 are studied in terms of its structure, role of scattering techniques to study its properties, and synthesis routes followed by its potential applications for environmental remediation (e.g., photocatalytic degradation of pollutants, gas sensing, and wastewater treatment) and biomedical domain (e.g., drug delivery, photothermal therapy, biomedical imaging, and biosensing). Further, a special emphasis is given to the significance of 2D WS2 as a substrate for surface-enhanced Raman scattering (SERS). The discussion is further extended to commercial and industrial aspects, keeping in view major research gaps in existing research studies.
RESUMO
Biomaterials have been widely used in tissue engineering applications at an increasing rate in recent years. The increased clinical demand for safe scaffolds, as well as the diversity and availability of biomaterials, has sparked rapid interest in fabricating diverse scaffolds to make significant progress in tissue engineering. Hydroxyapatite (HAP) has drawn substantial attention in recent years owing to its excellent physical, chemical, and biological properties and facile adaptable surface functionalization with other innumerable essential materials. This focused review spotlights a brief introduction on HAP, scope, a historical outline, basic structural features/properties, various synthetic strategies, and their scientific applications concentrating on functionalized HAP in the diverse area of tissue engineering fields such as bone, skin, periodontal, bone tissue fixation, cartilage, blood vessel, liver, tendon/ligament, and corneal are emphasized. Besides clinical translation aspects, the future challenges and prospects of HAP based biomaterials involved in tissue engineering are also discussed. Furthermore, it is expected that researchers may find this review expedient in gaining an overall understanding of the latest advancement of HAP based biomaterials.
Assuntos
Durapatita , Engenharia Tecidual , Materiais Biocompatíveis/uso terapêutico , Durapatita/química , Durapatita/farmacologia , Porosidade , Alicerces Teciduais/químicaRESUMO
There are numerous investigated factors that limit brain cancer treatment efficacy such as ability of prescribed therapy to cross the blood-brain barrier (BBB), tumor specific delivery of a therapeutics, transport within brain interstitium, and resistance of tumor cells against therapies. Recent breakthroughs in the field of nano-biotechnology associated with developing multifunctional nano-theranostic emerged as an effective way to manage brain cancer in terms of higher efficacy and least possible adverse effects. Keeping challenges and state-of-art accomplishments into consideration, this review proposes a comprehensive, careful, and critical discussion focused on efficient nano-enabled platforms including nanocarriers for drug delivery across the BBB and nano-assisted therapies (e.g., nano-immunotherapy, nano-stem cell therapy, and nano-gene therapy) investigated for brain cancer treatment. Besides therapeutic efficacy point-of-view, efforts are being made to explore ways projected to tune such developed nano-therapeutic for treating patients in personalized manner via controlling size, drug loading, delivery, and retention. Personalized brain tumor management based on advanced nano-therapies can potentially lead to excellent therapeutic benefits based on unique genetic signatures in patients and their individual disease profile. Moreover, applicability of nano-systems as stimulants to manage the brain cancer growth factors has also been discussed in photodynamic therapy and radiotherapy. Overall, this review offers a comprehensive information on emerging opportunities in nanotechnology for advancing the brain cancer treatment.
Assuntos
Neoplasias Encefálicas , Sistemas de Liberação de Medicamentos , Barreira Hematoencefálica , Encéfalo , Neoplasias Encefálicas/tratamento farmacológico , Humanos , Nanomedicina , NanotecnologiaRESUMO
The presence of toxic pollutants such as dyes and metal ions at higher concentrations in water is very harmful to the environment. Removal of these pollutants using diatomaceous earth or diatomite (DE) and surface-modified DE has been extensively explored due to their excellent physio-chemical properties and low cost. Therefore, naturally available DE being inexpensive, their surface modified adsorbents could be one of the potential candidates for the wastewater treatment in the future. In this context, the current review has been summarized for the removal of both pollutants i.e., dyes and metal ions by surface-modified DE using the facile adsorption process. In addition, this review is prominently focused on the various modification process of DE, their cost-effectiveness; the physio-chemical characteristics and their maximum adsorption capacity. Further, real-time scenarios of reported adsorbents were tabulated based on the cost of the process along with the adsorption capacity of these adsorbents.
RESUMO
Diatomaceous earth or diatom (DE) are naturally available and low cost micro particles with distinct porous structure were used as an adsorbent for the removal of a hazardous dye, Eriochrome Black T (EBT). The surface modification of these DE were performed by sol-gel and hydrothermal methods to obtain a series of adsorbents such as diatom-ceria (DC), diatom-silica xerogel (DX), and diatom-silica xerogel-ceria (DXC). A cauliflower like morphology structure of ceria was observed on DE and DX. The adsorption performance of EBT was conducted by varying various parameters such as pH, adsorbent dosage, initial concentration, contact time and ionic strength. The materials DE, DC, DX and DXC showed the EBT removal efficiencies of 52, 77, 20, and 93%, respectively. The maximum adsorption capacity (qm) of DE, DC, DX and DXC was found to be 13.83, 23.64, 0.2 and 47.02â¯mgg-1 for the adsorption of EBT, respectively. The selectivity of EBT towards DXC was evaluated by treating a mixture of anionic dyes. The dye removal experiments was performed in presence of inorganic salts, however the presence of these salts did not affect the removal efficiency of DXC. Furthermore, the reusability of DXC was studied by recycling it up to 5 times and even at 5th cycle a removal efficiency of â¼66.8% was found. Thus, these studies demonstrate that the DXC material could be a promising candidate for the removal of EBT via adsorption for real time application in water treatment.
Assuntos
Compostos Azo/análise , Corantes/análise , Terra de Diatomáceas/metabolismo , Diatomáceas/metabolismo , Poluentes Químicos da Água/análise , Purificação da Água/métodos , Adsorção , Porosidade , Reciclagem , Sílica Gel/químicaRESUMO
Diatoms, unicellular photosynthetic algae covered with siliceous cell wall, are also called frustule. These are the most potential naturally available materials for the development of cost-effective drug delivery systems because of their excellent biocompatibility, high surface area, low cost and ease of surface modification. Mesoporous silica materials such as MCM-41 and SBA-15 have been extensively used in drug delivery area. Their synthesis is challenging, time consuming, requires toxic chemicals and are energy intensive, making the entire process expensive and non-viable. Therefore, it is necessary to explore alternative materials. Surprisingly, nature has provided some exciting materials called diatoms; biosilica is one such a material that can be potentially used as a drug delivery vehicle. The present review focuses on different types of diatom species used in drug delivery with respect to their structural properties, morphology, purification process and surface functionalization. In this review, recent advances along with their limitations as well as the future scope to develop them as potential drug delivery vehicles are discussed.