Efficient Photoelectrochemical Hydrogen Generation Based on Core Size Effect of Heterostructured Quantum Dots.

Colloidal quantum dots (QDs) are shown to be effective as light-harvesting sensitizers of metal oxide semiconductor (MOS) photoelectrodes for photoelectrochemical (PEC) hydrogen (H2) generation. The CdSe/CdS core/shell architecture is widely studied due to their tunable absorption range and band alignment via engineering the size of each composition, leading to efficient carrier separation/transfer with proper core/shell band types. However, until now the effect of core size on the PEC performance along with tailoring the core/shell band alignment is not well understood. Here, by regulating four types of CdSe/CdS core/shell QDs with different core sizes (diameter of 2.8, 3.1, 3.5, and 4.8 nm) while the thickness of CdS shell remains the same (thickness of 2.0 ± 0.1 nm), the Type II, Quasi-Type II, and Type I core/shell architecture are successfully formed. Among these, the optimized CdSe/CdS/TiO2 photoelectrode with core size of 3.5 nm can achieve the saturated photocurrent density (Jph) of 17.4 mA cm-2 under standard one sun irradiation. When such cores are further optimized by capping alloyed shells, the Jph can reach values of 22 mA cm2 which is among the best-performed electrodes based on colloidal QDs.

Ligand Screening of Membrane Proteins Embedded in Nanodiscs: How to Manage Non-Specific Interactions in Weak Affinity Chromatography?

Miniaturized weak affinity chromatography is emerging as an interesting alternative to conventional biophysical tools for performing fragment-screening studies in the context of fragment-based drug discovery. In order to push back the analytical limits, it is necessary not only to control non-specific interactions with chromatographic support, but also to adapt this methodology by comparing the results obtained on an affinity column to a control column. The work presented in this study focused on fragment screening that targets a model membrane protein, the adenosine A2A receptor, embedded in nanodiscs (NDs) as biomimetic membranes. By studying the retention behavior of test fragment mixtures on supports modified with different types of NDs, we were able to determine the contribution of ND-related non-specific interactions, in particular the electrostatic effect of anionic phospholipids and the hydrophobic effect of neutral phospholipids. Different strategies for the preparation of control columns (empty NDs, orthosteric site blocking) were investigated and are presented for the first time. With these two types of control columns, the screening enabled the identification of two new fragments of AA2AR, which were confirmed by competition experiments and whose Kd values, estimated directly during the screening or after the competition experiments in frontal mode, were in good agreement.

Prevalence of ultrasound and clinical findings suggestive of inflammatory arthritis in children with skin psoriasis.

OBJECTIVE: To evaluate the prevalence of clinical and ultrasound (grey-scale and Doppler) abnormalities in joints, periarticular structures and nails of children affected by skin psoriasis (PsO). METHODS: Cross-sectional study including consecutive children affected by PsO. A systematic clinical and ultrasound evaluation of joints, entheses, tendons and nails were performed by independent examiners blinded to each other assessment. RESULTS: 57 Children: 26 girls (46%), mean age of 9 ± 4 years, divided into two groups, asymptomatic (Asy, 42 children) and symptomatic (Sy, 15 children) according to musculoskeletal pain. Differences were observed between the two groups in relation to age (9 ± 3 in Asy vs 11 ± 4 yrs in Sy, p< 0.05), PsO duration (2.4 ± 2.4 vs 5.4 ± 3.9 yrs, p< 0.001), systemic treatment (23 [54.8%] vs 2 [13.3%], p< 0.01), tender joint count (0 vs 12 children [80%], p< 0.001), swollen joint count (0 vs 3 [20%], p< 0.01) and entheseal pain (0 vs 10 [66.7%], p< 0.001). Ultrasound evaluation showed statistically significant differences between Asy and Sy groups for the presence of ultrasound abnormalities (16/42 [38%] vs 12/15 [80%]), synovitis (1/42 [2%] vs 4/15 [25%]) and enthesitis (4/42 [9.5%] vs 5/15 [33%]). Three children in the Sy group were classified with juvenile psoriatic arthritis (JPsA). CONCLUSIONS: Ultrasound abnormalities were higher in the Sy group with synovitis and enthesitis as the most prevalent findings. Asy patients were more frequently under systemic treatment. Ultrasound and a systematic clinical evaluation are useful tools for detecting subclinical JPsA in children with PsO and musculoskeletal symptoms.

Extending the Affinity Range of Weak Affinity Chromatography for the Identification of Weak Ligands Targeting Membrane Proteins.

The identification of weak-affinity ligands targeting membrane proteins is of great interest in Fragment-Based Drug Design (FBDD). Recently, miniaturized weak affinity chromatography (WAC) has been proposed as a valuable tool to study interactions between small ligands and wild-type membrane proteins embedded in so-called nanodisc biomimetic membranes immobilized on GMA-co-EDMA monoliths in situ-synthesized in capillary columns (less than one microliter in volume). In this proof-of-concept study, the achievable affinity range was limited to medium affinity (low micromolar range). The present work investigates different strategies to extend the affinity range towards low affinities, either by increasing the density of membrane proteins on the chromatographic support or by reducing non-specific interactions with the monolith. The combination of the use of a new and more hydrophilic monolithic support (poly(DHPMA-co-MBA)) and a multilayer nanodisc grafting process (up to three layers) allows a significant increase in the membrane protein density by a more than three-fold factor (up to 5.4 pmol cm-1). Such an increase in protein density associated with reduced non-specific interactions makes it possible to extend the range of detectable affinity, as demonstrated by the identification and characterization of affinities of very low-affinity ligands (Kd values of several hundred micromolar) for the adenosine receptor AA2AR used as a model protein, which was not possible before. The affinity was confirmed by competition experiments.

Towards Predicting the Sequential Appearance of Zeolitic Imidazolate Frameworks Synthesized by Mechanochemistry.

We use computational materials methods to study the sequential appearance of zinc-based zeolitic imidazolate frameworks (ZIFs) generated in the mechanochemical conversion process. We consider nine ZIF topologies, namely RHO, ANA, QTZ, SOD, KAT, DIA, NEB, CAG and GIS, combined with the two ligands 2-methylimidazolate and 2-ethylimidazolate. Of the 18 combinations obtained, only six (three for each ligand) were actually observed during the mechanosynthesis process. Energy and porosity calculations based on density functional theory, in combination with the Ostwald rule of stages, were found to be insufficient to distinguish the experimentally observed ZIFs. We then show, using classical molecular dynamics, that only ZIFs withstanding quasi-hydrostatic pressure P ≥ 0.3 GPa without being destroyed were observed in the laboratory. This finding, along with the requirement that successive ZIFs be generated with decreasing porosity and/or energy, provides heuristic rules for predicting the sequences of mechanically generated ZIFs for the two ligands considered.

High-sensitivity small-molecule detection of microcystin-LR cyano-toxin using a terahertz-aptamer biosensor.

We demonstrate the rapid and highly sensitive detection of a small molecule, microcystin-LR (MC-LR) toxin using an aptasensor based on a terahertz (THz) emission technique named the terahertz chemical microscope (TCM). The main component of the TCM is the sensing plate, which consists of a thin silicon layer deposited on a sapphire substrate, with a natural SiO2 layer formed on the top of the Si layer. The DNA aptamer is linked to the oxidized top surface of the silicon layer by a one-step reaction (click chemistry) between the DBCO-labeled aptamer and an azido group that binds to the surface. Using density functional theory (DFT) calculations, the number of active sites on the surface has been estimated to be 3.8 × 1013 cm-2. Aptamer immobilization and MC-LR binding have been optimized by adjusting the aptamer concentration and the binding buffer composition. When MC-LR binds with the DNA aptamer, it causes a change in the chemical potential at the surface of the sensing plate, which leads to a change in the amplitude of the THz signal. Compared with other bio-sensing methods such as surface plasmon resonance (SPR), TCM is a rapid assay that can be completed in 15 min (10 min incubation and 5 min data acquisition). Moreover, our results show that the aptamer-based TCM can detect MC-LR with an excellent detection limit of 50 ng L-1, which is 20 times more sensitive compared with SPR measurements of MC-LR.

Non-PGM Electrocatalysts for PEM Fuel Cells: A DFT Study on the Effects of Fluorination of FeNx-Doped and N-Doped Carbon Catalysts.

Fluorination is considered as a means of reducing the degradation of Fe/N/C, a highly active FeNx-doped disorganized carbon catalyst for the oxygen reduction reaction (ORR) in PEM fuel cells. Our recent experiments have, however, revealed that fluorination poisons the FeNx moiety of the Fe/N/C catalytic site, considerably reducing the activity of the resulting catalyst to that of carbon only doped with nitrogen. Using the density functional theory (DFT), we clarify in this work the mechanisms by which fluorine interacts with the catalyst. We studied 10 possible FeNx site configurations as well as 2 metal-free sites in the absence or presence of fluorine molecules and atoms. When the FeNx moiety is located on a single graphene layer accessible on both sides, we found that fluorine binds strongly to Fe but that two F atoms, one on each side of the FeNx plane, are necessary to completely inhibit the catalytic activity of the FeNx sites. When considering the more realistic model of a stack of graphene layers, only one F atom is needed to poison the FeNx moiety on the top layer since ORR hardly takes place between carbon layers. We also found that metal-free catalytic N-sites are immune to poisoning by fluorination, in accordance with our experiments. Finally, we explain how most of the catalytic activity can be recovered by heating to 900 °C after fluorination. This research helps to clarify the role of metallic sites compared to non-metallic ones upon the fluorination of FeNx-doped disorganized carbon catalysts.

Broadband and efficient adiabatic three-wave-mixing in a temperature-controlled bulk crystal.

Nonlinear interactions are commonly used to access to wavelengths not covered by standard laser systems. In particular, optical parametric amplification (OPA) is a powerful technique to produce broadly tunable light. However, common implementations of OPA suffer from a well-known trade-off, either achieving high efficiency for narrow spectra or inefficient conversion over a broad bandwidth. This shortcoming can be addressed using adiabatic processes. Here, we demonstrate a novel technique towards this direction, based on a temperature-controlled phase mismatch between the interacting waves. Using this approach, we demonstrate, by tailoring the temperature profile, an increase in conversion efficiency by 21%, reaching a maximum of 57%, while simultaneously expanding the bandwidth to over 300 nm. Our technique can readily enhance the performances of current OPA systems.

Towards understanding the unusual photoluminescence intensity variation of ultrasmall colloidal PbS quantum dots with the formation of a thin CdS shell.

In this study, we report anomalous size-dependent photoluminescence (PL) intensity variation of PbS quantum dots (QDs) with the formation of a thin CdS shell via a microwave-assisted cation exchange approach. Thin shell formation has been established as an effective strategy for increasing the PL of QDs. Nonetheless, herein we observed an unusual PL decrease in ultrasmall QDs upon shell formation. We attempted to understand this abnormal phenomenon from the perspective of trap density variation and the probability of electrons and holes reaching surface defects. To this end, the quantum yield (QY) and PL lifetime (on the ns-µs time scales) of pristine PbS QDs and PbS/CdS core/shell QDs were measured and the radiative and non-radiative recombination rates were derived and compared. Moreover, transient absorption (TA) analysis (on the fs-ns time scale) was performed to better understand exciton dynamics at early times that lead to and affect longer time dynamics and optical properties such as PL. These experimental results, in conjunction with theoretical calculations of electron and hole wave functions, provide a complete picture of the photophysics governing the core/shell system. A model was proposed to explain the size-dependent optical and dynamic properties observed.

Active terahertz two-wire waveguides.

We demonstrate, by generating a THz electric field directly within the guiding structure, an active two-wire waveguide operating in the terahertz (THz) range of wavelengths. We compare the energy throughput of the active configuration with that of a radiatively coupled semi-large photoconductive antenna, in which the radiation is generated outside the waveguide, reporting a 60 times higher energy throughput for the same illumination power and applied voltage. This novel, active waveguide design allows to have efficient coupling of the THz radiation in a dispersion-less waveguide without the need of involved radiative coupling geometries.

A density functional theory study of catalytic sites for oxygen reduction in Fe/N/C catalysts used in H2/O2 fuel cells.

The oxygen reduction catalytic activity of carbon-supported FeN4 moieties bridging micropores between two graphene sheets was investigated by density functional theory (DFT). Based on the FeN(2+2)/C structure proposed earlier by our group, two types of FeN(2+2)/C structures were considered: one mostly planar and one in which the Fe ion is significantly displaced out of the graphitic plane. A structure in which the FeN4 moiety is embedded in an extended graphene sheet (FeN/C) was also considered. In addition, we have investigated the influence of an axial pyridine group approaching the Fe centre. The formation energy is lowest for the planar FeN(2+2)/C structure. The overall downhill behaviour of the relative free energy vs. the reaction step suggests that most structures have catalytic activity near zero potential. This conclusion is further supported by calculations of the binding energies of adsorbed O2 and H2O and of the O-O bond lengths of adsorbed O2 and OOH. The side-on interaction of adsorbed O2 is preferred over the end-on interaction for the three basic structures without the axial pyridine. The pyridine coordination produces a stronger binding of O2 for the planar FeN(2+2)/C and the FeN/C structures as well as a dominant end-on interaction of O2. The energy levels of the planar FeN(2+2)/C structure with and without the pyridine ligand are nearly equal for iron spin states S = 1 and S = 2, suggesting that both configurations are formed with similar concentration during the preparation process, as also previously found for two of the iron sites by Mössbauer spectroscopy experiments.

Self-referenced spectral domain interferometry for improved signal-to-noise measurement of terahertz radiation.

In this work, we demonstrate self-referenced spectral domain interferometry for the electro-optic sampling of terahertz (THz) electric fields. This technique allows reduction of the phase noise of the measurement, thus increasing the signal-to-noise ratio (SNR). Using the proposed technique, we achieve a more than sixfold improvement in the SNR of the detected THz electric field.

Quantifying Platinum and Palladium in Solid Ore Using Laser-Induced Breakdown Spectroscopy Assisted by the Laser-Induced Fluorescence (LIBS-LIF) Technique.

The laser-induced breakdown spectroscopy assisted by laser-induced fluorescence (LIBS-LIF) in a two-step process was used to measure the concentration of platinum (Pt) and palladium (Pd) by surface analysis of a solid ore core from the Lac des Iles mine followed by analysis of the same core that was pulverized and compacted. This work focuses mainly on the measurement of Pt since the case of Pd has been extensively discussed in previous work. The excitation of Pt is performed at 235.71 nm with fluorescence emission observed near 269.84 nm. Calibration was performed with synthetic samples prepared from the same ore as the samples studied and the calibration curve shows good linearity in Pt content over several orders of magnitude. A limit of detection (LOD) of approximately 0.15 parts per million (ppm) over an average of 200 laser shots was demonstrated. In contrast, conventional LIBS provides a LOD of about 21 ppm over an average of 200 laser shots due to low signal-to-noise ratio and spectral interference from other elements and does not meet the requirements for estimating the average Pt concentration in the ore. The Pt concentrations obtained using LIBS-LIF on solid ore are generally in good agreement with those obtained in its pulverized and compacted form, as well as with laboratory measurements made by conventional chemical methods. However, the comparison of the results obtained for Pd using LIBS-LIF with the laboratory showed a less satisfactory agreement, probably due to its more inhomogeneous distribution in the ore.

Deciphering dynamic combinatorial libraries of glycoclusters with miniaturized weak affinity chromatography coupled with mass spectrometry (nano-FAC-MS).

We report an original methodology based on affinity chromatography coupled with mass spectrometry to decipher the complexity of dynamic combinatorial libraries (DCLs) of glycoclusters. Such libraries are intended to boost the design of potential therapeutic anti-infectious agents targeting Pseudomonas aeruginosa, which is responsible for numerous diseases, mostly found in hospitals as major a cause of nosocomial infections. Dynamic combinatorial chemistry provides a rapid access to an equilibrating mixture of glycocluster candidates through the formation of reversible covalent bonds under thermodynamic control. Identifying each molecule in the complex mixture overcomes challenges due to the dynamic process. Selection of glycoclusters candidates was first realized on a model lectin (Concanavalin A, ConA). Home-made affinity nanocolumns, containing covalently immobilized ConA and have volumes in the microliter range, were used to separate DCLs of glycoclusters with respect to their specific lectin binding properties under buffered aqueous conditions. Miniaturization facilitates the inline coupling with MS detection in such purely aqueous and buffered conditions and reduces target protein consumption. Monolithic lectin-affinity columns prepared by immobilization of ConA were first characterized using a known ligand. The amount of active binding immobilized lectin is 61 ± 5 pmol on 8.5-cm length column. We demonstrated the ability of our approach to evaluate individual dissociation constants of species directly in the complex mixture. The concept was then successfully applied to the screening of DCLs of more complex glycoclusters to identify (by mass spectrometry) and rank the ligands (by relative breakthrough curve delay) according to their affinity for the immobilized lectin in a single experiment.

Efficient Photoelectrochemical Hydrogen Generation Using Eco-Friendly "Giant" InP/ZnSe Core/Shell Quantum Dots.

InP quantum dots (QDs) are promising building blocks for use in solar technologies because of their low intrinsic toxicity, narrow bandgap, large absorption coefficient, and low-cost solution synthesis. However, the high surface trap density of InP QDs reduces their energy conversion efficiency and degrades their long-term stability. Encapsulating InP QDs into a wider bandgap shell is desirable to eliminate surface traps and improve optoelectronic properties. Here, we report the synthesis of "giant" InP/ZnSe core/shell QDs with tunable ZnSe shell thickness to investigate the effect of the shell thickness on the optoelectronic properties and the photoelectrochemical (PEC) performance for hydrogen generation. The optical results demonstrate that ZnSe shell growth (0.9-2.8 nm) facilitates the delocalization of electrons and holes into the shell region. The ZnSe shell simultaneously acts as a passivation layer to protect the surface of InP QDs and as a spatial tunneling barrier to extract photoexcited electrons and holes. Thus, engineering the ZnSe shell thickness is crucial for the photoexcited electrons and hole transfer dynamics to tune the optoelectronic properties of "giant" InP/ZnSe core/shell QDs. We obtained an outstanding photocurrent density of 6.2 mA cm-1 for an optimal ZnSe shell thickness of 1.6 nm, which is 288% higher than the values achieved from bare InP QD-based PEC cells. Understanding the effect of shell thickness on surface passivation and carrier dynamics offers fundamental insights into the suitable design and realization of eco-friendly InP-based "giant" core/shell QDs toward improving device performance.

Engineering Fe-N4 Electronic Structure with Adjacent Co-N2C2 and Co Nanoclusters on Carbon Nanotubes for Efficient Oxygen Electrocatalysis.

Regulating the local configuration of atomically dispersed transition-metal atom catalysts is the key to oxygen electrocatalysis performance enhancement. Unlike the previously reported single-atom or dual-atom configurations, we designed a new type of binary-atom catalyst, through engineering Fe-N4 electronic structure with adjacent Co-N2C2 and nitrogen-coordinated Co nanoclusters, as oxygen electrocatalysts. The resultant optimized electronic structure of the Fe-N4 active center favors the binding capability of intermediates and enhances oxygen reduction reaction (ORR) activity in both alkaline and acid conditions. In addition, anchoring M-N-C atomic sites on highly graphitized carbon supports guarantees of efficient charge- and mass-transports, and escorts the high bifunctional catalytic activity of the entire catalyst. Further, through the combination of electrochemical studies and in-situ X-ray absorption spectroscopy analyses, the ORR degradation mechanisms under highly oxidative conditions during oxygen evolution reaction processes were revealed. This work developed a new binary-atom catalyst and systematically investigates the effect of highly oxidative environments on ORR electrochemical behavior. It demonstrates the strategy for facilitating oxygen electrocatalytic activity and stability of the atomically dispersed M-N-C catalysts.

N, P-Codoped Graphene Dots Supported on N-Doped 3D Graphene as Metal-Free Catalysts for Oxygen Reduction.

Nitrogen and phosphorus-codoped graphene dots supported on nitrogen-doped three-dimensional graphene (N, P-GDs/N-3DG) have been synthesized by a facile freeze-annealing process. On the surface of the 3D interconnected porous structure, the N, P-GDs are uniformly dispersed. The as-prepared N, P-GDs/N-3DG material served as a metal-free catalyst for oxygen reduction reaction (ORR) in an alkaline medium and evaluated by a rotating ring-disk electrode. The N, P-GDs/N-3DG catalyst exhibits excellent ORR activity, which is comparable to that of the commercial Pt/C catalyst. Furthermore, it exhibits a higher tolerance to methanol and better stability than the Pt/C. This enhanced electrochemical catalytic performance can be ascribed to the presence of abundant functional groups and edge defects. This study indicates that P-N bonded structures play a vital role as the active sites in ORR.

COVID-19 in French patients with chronic inflammatory rheumatic diseases: Clinical features, risk factors and treatment adherence.

OBJECTIVE: To explore how patients with chronic inflammatory rheumatic diseases (CIRDs) coped with their disease during the COVID-19 pandemic and to identify possible predictive factors of SARS-CoV-2 infection in this population. METHODS: Patients followed in a single rheumatology department in France or registered on the Spondy+ platform, a secure e-health platform for spondyloarthritis patients, were invited to complete a questionnaire focused on their experiences around COVID19 symptoms, testing and medications access during the lockdown period. Descriptive statistics were used to report questionnaire's results. Factors associated with COVID-19 or with treatment discontinuation were assessed by logistic regression. RESULTS: We obtained 655 answers from the 2,081 contacted patients: 474 with spondyloarthritis, 129 with rheumatoid arthritis and 52 with psoriatic arthritis. The population was predominantly female (61.8%) with a mean age of 51.0±13.4 years. Incidence of COVID-19 was 6.9% (95%CI: 5.1-9.2%), including 12 confirmed and 33 highly suspicious cases. No death was observed and five patients needed to be hospitalized. Factors independently associated with an increased risk of infection were SARS-CoV-2 exposure, younger age and non-smoking. More than 30% of the patients suspended or decreased the dosage of one of their drugs during the lockdown period. This was followed in 63.4% of them by increased disease activity. Modifications were mostly motivated by fear of contagion (79.3%). CONCLUSION: We did not observe any increase of incidence or severity of COVID-19 in patients suffering of the 3 most common CIRDs. This survey also adds evidence of the safety of anti-rheumatic drugs use regarding COVID-19.

18-FDG PSEUDOTUMORAL LESION WITH QUICK FLOWERING TO A TYPICAL LUNG CT COVID-19.

As coronavirus pandemic continues to spread over the world, physicians have to be aware of atypical features of COVID-19 pneumonia. We report the case of a 78-year-old man presenting with pseudo-tumoral focal lesion of the left lung which switched shortly to severe and diffuse COVID-19 induced pneumonia. Nuclear medicine physicians and radiologists should be careful of some misleading hypermetabolic aspects mostly in asymptomatic patients.