RESUMO
NixMg1-xFe2O4(x = 0, 0.2, 0.4, 0.6) nanoparticles were symphonized via combustion with microwave assistance in the presence of Tamarindus indica seeds extract as fuel. Nanoparticles nature, size, morphology, oxidation state, elemental composition, and optical and luminescence properties were analysed using PXRD, FTIR, SEM, EDX, and HRTEM with SAED, XPS, UV-Visible and photoluminescence spectroscopy. PXRD analysis confirms that synthesized nanoparticles are spinel cubic and have a 17-18 nm average crystalline size. Tetrahedral and octahedral sites regarding stretching vibrations were confirmed by FTIR analysis. SEM and HRTEM data it is disclosed that the morphology of synthesized nanoparticles has nano flakes-like structure with sponge-like agglomeration. Elemental compositions of prepared nanoparticles were confirmed through EDX spectroscopy. XPS Spectroscopy confirmed and revealed transition, oxidation states, and elemental composition. The band gap and absorption phenomenon were disclosed using UV-visible spectroscopy, where the band gap declines (2.1, 2, 1.6, 1.8 eV), with increase in nickel NixMg1-xFe2O4(x = 0, 0.2, 0.4, 0.6) doping. Photoluminescence intensity reduces with an incline in nickel doping, was confirmed and disclosed using photoluminescence spectroscopy. Dyes (Methylene blue and Rhodamine B) degradation activity was performed in the presence of NDMF nanoparticles as a photocatalyst, which disclosed that 98.1% of MB dye and 97.9% of RB dye were degraded in 0-120 min. Regarding initial dye concentration and catalyst load, 5 ppm was initiated as the ideal initial concentration for both RB and MB dyes. 50 mg catalyst dosage was found to be most effective for the degradation of MB and RB dyes. In comparison, pH studies revealed that photodegradation efficiency was higher in neutral (MB-98.1%, RB-97.9%) and basic (MB-99.6%, RB-99.3%) conditions than in acidic (MB-61.8%, RB-60.4%) conditions.
Assuntos
Nanopartículas , Níquel , Magnésio , Micro-Ondas , Nanopartículas/química , CorantesRESUMO
Over the years, coal mining in the Mpumalanga Province of South Africa has negatively affected the environment by causing pollution of water resources, land subsidence and spontaneous coal combustion. Previous studies show that in-situ treatment of acid mine drainage (AMD) using coal fly ash (CFA) from local power stations was possible and sludge recovered out of such treatment can be used to backfill mines. In this article, the authors have attempted to understand the leaching characteristics of CFA when placed underground as a backfill material using the mine water leaching protocol (MWLP). The results show that the migration of contaminants between the coal fly ash and the AMD in the mine voids depends on the pH and quality of the mine water. While backfilling mine voids with CFA can neutralize and scavenge between 50% and 95% of certain environmentally sensitive elements from AMD such as Fe, Al, Zn, Cu, Ni, Co and Mn. At this moment, it is also important to point out that certain scavenged/removed contaminants from the AMD during initial phases of backfilling can be remobilized by the influx of acidic water into the mine voids. It has therefore been concluded that, while CFA can be used to backfill mine voids, the influx of fresh acidic mine water should be avoided to minimize the remobilization of trapped contaminants such as Fe, Al, Mn and As. However, the pozzolanic material resulting from the CFA-AMD interaction could prevent such influx.
Assuntos
Cinza de Carvão/análise , Minas de Carvão , Conservação dos Recursos Naturais/métodos , Poluição Ambiental/prevenção & controle , Esgotos/análise , Solo , Água/análise , Ácidos/química , Carvão Mineral , Cinza de Carvão/química , Concentração de Íons de Hidrogênio , Solo/química , Solo/normas , África do Sul , Poluentes Químicos da Água/análiseRESUMO
BACKGROUND: The discovery of signaling networks that drive oncogenic processes has led to the development of targeted anticancer agents. The burden of pigmentary adverse events from these drugs is unknown. OBJECTIVE: To conduct a systematic review and meta-analysis of published clinical trials and determine the incidence and risk of development of targeted therapy-induced pigmentary changes. METHODS: A comprehensive search was conducted to identify studies reporting targeted therapy-induced pigmentary changes. The incidence and relative risk were calculated. Case reports and series were reviewed to understand clinical characteristics. RESULTS: A total of 8052 patients from 36 clinical trials were included. The calculated overall incidences of targeted cancer therapy-induced all-grade pigmentary changes in the skin and hair were 17.7% (95% confidence interval [CI], 11.9-25.4) and 21.5% (95% CI, 14.9-30.1), respectively. The relative risk of all-grade pigmentary changes of skin and hair were 93.7 (95% CI, 5.86-1497.164) and 20.1 (95% CI, 8.35-48.248). Across 53 case reports/series (N = 75 patients), epidermal growth factor receptor and breakpoint cluster region-abelson inhibitors were the most common offending agents. LIMITATIONS: Potential under-reporting and variability in oncologists reporting these events. CONCLUSION: There is a significant risk of development of pigmentary changes during treatment with targeted anticancer therapies. Appropriate counseling and management are critical to minimize psychosocial impairment and deterioration in quality of life.
Assuntos
Antineoplásicos/efeitos adversos , Terapia de Alvo Molecular/efeitos adversos , Neoplasias/tratamento farmacológico , Transtornos da Pigmentação/induzido quimicamente , Transtornos da Pigmentação/patologia , Qualidade de Vida , Antineoplásicos/uso terapêutico , Efeitos Colaterais e Reações Adversas Relacionados a Medicamentos/epidemiologia , Efeitos Colaterais e Reações Adversas Relacionados a Medicamentos/etiologia , Efeitos Colaterais e Reações Adversas Relacionados a Medicamentos/fisiopatologia , Feminino , Humanos , Masculino , Neoplasias/patologia , Transtornos da Pigmentação/epidemiologia , Prevalência , Prognóstico , Ensaios Clínicos Controlados Aleatórios como Assunto , Medição de RiscoRESUMO
BACKGROUND: Peristomal dermatitis is a common complication for the >700 000 patients in the United States with an ostomy. The role of stoma skin care products in peristomal dermatitis is poorly understood. OBJECTIVE: To evaluate stoma skin care products as a cause of peristomal dermatitis. METHODS: A retrospective chart review of patients with peristomal dermatitis at four academic hospitals from January 2010 to March 2014 was performed. Patient demographics, clinical information and use test and patch test results were documented. RESULTS: Eighteen patients identified as having peristomal dermatitis were tested. Twelve of these had peristomal contact dermatitis. We identified numerous stoma skin care products as triggers of irritant and/or allergic contact dermatitis. The most common stoma skin care product used and/or involved in dermatitis was Cavilon™ No Sting Barrier Film. CONCLUSIONS: Our data support a paradigm shift whereby healthcare workers treating patients with peristomal dermatitis, which is currently considered to be a reaction mainly to bodily fluids, must consider those products used to protect the skin as potential triggers for this disease. Therefore, patients with peristomal dermatitis should be tested with their stoma skin care agents to determine the need for removal or change of these products. Additionally, full ingredient labelling by manufacturers would help identify new allergens and irritants.
Assuntos
Dermatite Alérgica de Contato/etiologia , Pomadas/efeitos adversos , Complicações Pós-Operatórias/etiologia , Higiene da Pele/efeitos adversos , Creme para a Pele/efeitos adversos , Adulto , Idoso , Idoso de 80 Anos ou mais , Colostomia , Feminino , Humanos , Ileostomia , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Estomas Cirúrgicos , Derivação UrináriaRESUMO
Luminescence technology has been improved with the help of semiconductor nanoparticles that possess novel optical and electrical properties compared with their bulk counterpart. The aim of this study was to design semiconductor nanocrystals in their pure (ZnS) or doped form (ZnS:Mn) with different concentrations of Mn2+ ions by a wet chemical route stabilized by ethylenediamine tetra-acetic acid (EDTA) and to evaluate their luminescence properties. The nanocrystals were characterized by physicochemical techniques such as X-ray diffraction (XRD), High-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SEAD), EDS, and ultraviolet (UV)-visible light and photoluminescence (PL) studies. These results showed the presence of cubic phase and spherically shaped nanocrystals. A blue shift with respect to their bulk counterpart was observed. PL emission spectra were observed with a fixed blue peak and the yellow-orange bands were red shifted towards the red region under the same excitation wavelength. The orange-red bands were attributed to the radiation transition of electrons in 3d5 unfilled shells of Mn2+ ions [4 T1 (4 G)-6 A1 (6 S)]; the ZnS matrix varied with Mn2+ concentration. Shift and increase in the intensity of the PL and absorption bands were observed with increase in Mn content. The study showed that Mn2+ -doped ZnS nanocrystal emission bands can be tuned from the yellow-orange to the red regions under a controlled synthesis process and could be used as promising luminescent emitters in the biology field upon functionalization with suitable materials. Further studies on construction with various other materials will be useful for practical applications.
Assuntos
Ácido Edético/química , Substâncias Luminescentes/química , Nanopartículas/química , Cor , Substâncias Luminescentes/síntese química , Medições Luminescentes , Manganês/química , Microscopia Eletrônica de Transmissão , Espectrofotometria Ultravioleta , Sulfetos/química , Temperatura , Difração de Raios X , Compostos de Zinco/químicaRESUMO
Mining of coal is very extensive and coal is mainly used to produce electricity. Coal power stations generate huge amounts of coal fly ash of which a small amount is used in the construction industry. Mining exposes pyrite containing rocks to H2O and O2. This results in the oxidation of FeS2 to form H2SO4. The acidic water, often termed acid mine drainage (AMD), causes dissolution of potentially toxic elements such as, Fe, Al, Mn and naturally occurring radioactive materials such as U and Th from the associated bedrock. This results in an outflow of AMD with high concentrations of sulphate ions, Fe, Al, Mn and naturally occurring radioactive materials. Treatment of AMD with coal fly ash has shown that good quality water can be produced which is suitable for irrigation purposes. Most of the potentially toxic elements (Fe, Al, Mn, etc) and substantial amounts of sulphate ions are removed during treatment with coal fly ash. This research endeavours to establish the fate of the radioactive materials in mine water with coal fly ash containing radioactive materials. It was established that coal fly ash treatment method was capable of removing radioactive materials from mine water to within the target water quality range for drinking water standards. The alpha and beta radioactivity of the mine water was reduced by 88% and 75% respectively. The reduced radioactivity in the mine water was due to greater than 90% removal of U and Th radioactive materials from the mine water after treatment with coal fly ash as ThO2 and UO2. No radioisotopes were found to leach from the coal fly ash into the mine water.
Assuntos
Ácidos/química , Hidróxido de Alumínio/química , Radiação de Fundo , Cinza de Carvão/química , Mineração , Poluentes Radioativos da Água/isolamento & purificaçãoRESUMO
OBJECTIVE: We sought to examine outcomes of ultrafiltration in real world community-based hospital settings. BACKGROUND: Ultrafiltration (UF) is an accepted therapeutic option for advanced decompensated heart failure (ADHF). the feasibility of UF in a community hospital setting, by general cardiologists in a start-up program had not been objectively evaluated. METHODS: We retrospectively analyzed the first-year cohort of ADHF patients treated with UF from 10/1/2019 to 10/1/2020, which totaled 30 patients, utilizing the CHF Solutions Aquadex FlexFlow™ System with active UF rate titration. RESULTS: Baseline patient characteristics were similar to RCTs: mean age 63, 73 % male; 27 % female; 53 % Caucasian; 47 % African American; 77 % had LVEF ≤ 40. The baseline mean serum creatinine (Cr) was 1.84 ±0.62 mg/dL, mean GFR of 36.95 ±9.60 ml/min. HF re-admission rates were not significantly different than prior studies (17.2 % at 30 d, 23.3 % at 60 d, but in our cohort, per patient HF re-admission rates were reduced significantly by 60 d (0.30 p = 0.017). CONCLUSION: Our analysis showed success with UF in mainstream setting with reproducible results of significant volume loss without adverse renal effect, mitigation of recurrent Hdmissions, and remarkable subjective clinical benefit.
Assuntos
Insuficiência Cardíaca , Hospitais Comunitários , Ultrafiltração , Humanos , Feminino , Masculino , Insuficiência Cardíaca/terapia , Insuficiência Cardíaca/fisiopatologia , Estudos Retrospectivos , Pessoa de Meia-Idade , Ultrafiltração/métodos , Resultado do Tratamento , IdosoAssuntos
Bactérias/isolamento & purificação , Neoplasias da Mama/tratamento farmacológico , Fungos/isolamento & purificação , Paroniquia/induzido quimicamente , Paroniquia/microbiologia , Dermatopatias Bacterianas/microbiologia , Antineoplásicos Fitogênicos/efeitos adversos , Dermatomicoses/tratamento farmacológico , Dermatomicoses/microbiologia , Docetaxel , Feminino , Humanos , Paclitaxel/efeitos adversos , Dermatopatias Bacterianas/tratamento farmacológico , Taxoides/efeitos adversosRESUMO
Sulphate removal from sodium sulphate-rich brine using barium hydroxide and recovery of the barium salts has been investigated. The sodium sulphate-rich brine treated with different dosages of barium hydroxide to precipitate barium sulphate showed sulphate removal from 13.5 g/L to less than 400 mg/L over 60 min using a barium to sulphate molar ratio of 1.1. The thermal conversion of precipitated barium sulphate to barium sulphide achieved a conversion yield of 85% using coal as both a reducing agent and an energy source. The recovery of a pure mixture of barium salts from barium sulphide, which involved dissolution of barium sulphide and reaction with ammonium hydroxide resulted in recovery of a mixture of barium carbonate (62%) and barium hydroxide (38%), which is a critical input raw material for barium salts based acid mine drainage (AMD) desalination technologies. Under alkaline conditions of this barium salt mixture recovery process, ammonia gas is given off, while hydrogen sulfide is retained in solution as bisulfide species, and this provides basis for ammonium hydroxide separation and recovery for reuse, with hydrogen sulfide also recoverable for further industrial applications such as sulfur production by subsequent stripping.
Assuntos
Bário/isolamento & purificação , Sulfatos/isolamento & purificação , Purificação da Água/métodos , Amônia/química , Bário/química , Compostos de Bário/química , Sulfato de Bário/química , Carbonatos/química , Concentração de Íons de Hidrogênio , Sulfatos/químicaRESUMO
We discuss photolytic-interference-free, high-repetition-rate imaging of reaction intermediates in flames and plasmas using femtosecond (fs) multiphoton excitation. The high peak power of fs pulses enables efficient nonlinear excitation, while the low energy nearly eliminates interfering single-photon photodissociation processes. We demonstrate proof-of-principle, interference-free, two-photon laser-induced fluorescence line imaging of atomic hydrogen in hydrocarbon flames and discuss the method's implications for certain other atomic and molecular species.
Assuntos
Erupções Acneiformes/prevenção & controle , Anti-Infecciosos/uso terapêutico , Antineoplásicos/efeitos adversos , Carcinoma de Células Escamosas/tratamento farmacológico , Cetuximab/efeitos adversos , Neoplasias Colorretais/tratamento farmacológico , Dapsona/uso terapêutico , Toxidermias/prevenção & controle , Erupções Acneiformes/induzido quimicamente , Adulto , Idoso , Carcinoma de Células Escamosas/secundário , Neoplasias Colorretais/patologia , Método Duplo-Cego , Toxidermias/etiologia , Dermatoses Faciais/induzido quimicamente , Dermatoses Faciais/prevenção & controle , Géis , Humanos , Masculino , Pessoa de Meia-Idade , Estudos Prospectivos , Qualidade de Vida , Creme para a Pele/uso terapêutico , TóraxRESUMO
Fly Ash (FA) from a power station in South Africa was investigated to neutralise and remove contaminants from Acid Mine Drainage (AMD). After this primary treatment the insoluble FA residue namely solid residue (SR) was investigated as a suitable mine backfill material by means of strength testing. Moreover, SR was used to synthesise zeolite-P using a two-step synthesis procedure. Furthermore, the zeolite-P was investigated to polish process water from the primary FA-AMD reaction. The main objective of this series of investigations is to achieve zero waste and to propose an integrated AMD management using FA. Fly Ash was mixed with AMD at various predetermined FA-AMD ratios until the mixtures achieved circumneutral pH or higher. The supernatants were then analyzed using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) and Ion Chromatography (IC) for cations and anions respectively. The physical strength testing of SR was carried out by mixing it with 3% Ordinary Portland Cement (OPC) and curing for 410 days. Synthesis of zeolite-P using SR was carried out by two step synthesis procedure: ageing for 24 hours followed by a mild hydrothermal synthesis at 100°C for 4 days. The polishing of process water from primary AMD treatment using FA was ascertained by mixing the process water with zeolite at a liquid to solid ratio of 100:1 for 1 hour. The results indicated that FA can be successfully used to ameliorate AMD. High removal of major AMD contaminants Fe, Al, Mg, Mn and sulphate was achieved with the ash treatment and trace elements such as Zn, Ni, Cu and Pb were also removed by the FA. Strength testing over 410 days indicated that the material gained strength over the testing period. The maximum unconfined compressive strength and elastic modulus was observed to be approximately 0.3 MPa and 150 Mpa respectively. The X-ray diffraction (XRD) analysis of the synthesized product indicated that SR was successfully converted into zeolite-P with some mullite phase remaining as a result of incomplete conversion of the feedstock SR. The zeolite-P was used as an ion exchange material to remove selective elements from the process water. Elements such as Ca, Sr, Ba and V were successfully removed from the process water with the zeolite-P. Only marginal removal of Mo was observed during the experiments. It was also observed that Na was exchanged into the solution. This study successfully demonstrated zero waste concepts and an integrated AMD management scheme using FA was developed in this study. The implementation of this technology will address FA storage problem as well as costs associated with AMD treatment.
Assuntos
Cinza de Carvão/química , Minas de Carvão , Metais/química , Eliminação de Resíduos Líquidos/métodos , Poluentes Químicos da Água/química , Cinza de Carvão/análise , Força Compressiva , Elasticidade , Concentração de Íons de Hidrogênio , Resíduos Industriais/análise , Metais/análise , Poluentes Químicos da Água/análise , Difração de Raios X , Zeolitas/análise , Zeolitas/químicaRESUMO
We report the direct measurements of methyl radicals (CH(3)) in methane/air flames at atmospheric pressure by using coherent microwave Rayleigh scattering (Radar) from Resonance Enhanced Multi-Photon Ionization (REMPI), also known as the Radar REMPI technique. A tunable dye laser was used to selectively induce the (2 + 1) REMPI ionization of methyl radicals (CH(3), 3p(2)A(2)('')0(0)(0) band) in a near adiabatic and premixed laminar methane/air flame, generated by a Hencken burner. In situ measurements of the REMPI electrons were made by non-intrusively using a microwave homodyne transceiver detection system. The REMPI spectrum of the CH(3) radical was obtained and a spatial distribution of the radicals limited by focused laser beam geometry, approximately 20 µm normal to the flame front and 2.4 mm parallel to the flame, was determined. The measured CH(3) was in good agreement with numerical simulations performed using the detailed kinetic mechanism of GRI-3.0. To the authors' knowledge, these experiments represent the first directly-measured spatially-resolved CH(3) in a flame at atmospheric pressure.
Assuntos
Metano/análogos & derivados , Metano/análise , Radar , Refratometria/métodos , Pressão Atmosférica , Incêndios , Metano/efeitos da radiação , Micro-OndasRESUMO
Theory links the reactivity of metal surfaces to the interatomic spacing and, hence, to the tangential strain. We point out that this proposition can be experimentally verified by exploiting a seemingly unrelated phenomenon, the mechanical deformation of solid bodies when charged in an electrolyte. Such experiments allow the strength of coupling between adsorption enthalpy and strain to be quantified. For hydrogen adsorption on Pd, the result agrees with ab initio computation and with trends that can be inferred from experiment on pseudomorphic layers strained by epitaxy with misfitting substrates. The data suggest that experimentally accessible strain values afford a variation of the adatom concentration by several orders of magnitude and a significant shift of the reaction along the 'volcano curve' of reactivity versus adsorption strength.
RESUMO
Although actuation in biological systems is exclusively powered by chemical energy, this concept has not been realized in man-made actuator technologies, as these rely on generating heat or electricity first. Here, we demonstrate that surface-chemistry-driven actuation can be realized in high-surface-area materials such as nanoporous gold. For example, we achieve reversible strain amplitudes of the order of a few tenths of a per cent by alternating exposure of nanoporous Au to ozone and carbon monoxide. The effect can be explained by adsorbate-induced changes of the surface stress, and can be used to convert chemical energy directly into a mechanical response, thus opening the door to surface-chemistry-driven actuator and sensor technologies.
RESUMO
N,S-co-doped anatase-phase TiO2 (N,S-TiO2) nanophotocatalysts were prepared from either benzothiazoline or aminothiol with titanium isopropoxide followed by a systematic thermal decomposition. The chemical nature of S and N in N,S-TiO2 have been identified by XPS to be sulfate and NO-like, respectively. A significant band broadening and red-shift in the UV-visible absorption spectrum of N,S-TiO2 suggests a band gap reduction compared to TiO2. A maximum band-gap narrowing of 0.22 +/- 0.02 eV was observed on N,S-TiO2. Higher energy width observed on N,S-TiO, is in contrast to 0.13 eV from N-doped TiO2 indicating the sulfate-like species might play a major role in narrowing the band-gap to a higher level. It is confirmed that the oxidation of N and S to NO and SO4(2-) occurs in the final stage of preparation of N,S-TiO2, during calcination in air. It is predicted that the oxygen associated with sulfate and NO structural features could be crucial in bringing down the energy gap and red shift in optical absorption and the role of sulfur is to facilitate the above. Photocatalytic decomposition of methylene blue has been carried out on N,S-TiO2 shows higher activity than the commercial TiO2 in the visible region. However, sulfate species seems to enhance the activity of N,S-TiO2 marginally compared to N-TiO2, and possible suggestions are given to improve the same.
RESUMO
The effects of phosphorus-containing compounds (PCCs) on the extinguishment and structure of methane-air coflow diffusion flames, in the cup-burner configuration, is studied computationally. Dimethyl methylphosphonate (DMMP), trimethyl phosphate (TMP), or phosphoric acid is added to either the air or fuel flow. Time-dependent axisymmetric computation is performed with full gas-phase chemistry and transport to reveal the flame structure and inhibition process. A detailed chemical-kinetics model (77 species and 886 reactions) is constructed by combining the methane-oxygen combustion and phosphorus inhibition chemistry. A simple model for radiation from CH4, CO, CO2, H2O, and soot based on the optically thin-media assumption is incorporated into the energy equation. The inhibitor effectiveness is calculated as the minimum extinguishing concentrations (MECs) of CO2 (added to the oxidizer) as a function of the PCC loading (added to the oxidizer or fuel stream). The calculated MEC of CO2 without an inhibitor is in good agreement with the measured value. For moderate DMMP loading to the air (<1 %), the measured value becomes significantly smaller, presumably due to particle formation in the experiment. An inhibitor in the oxidizer flow is an order of magnitude more effective compared to that in the fuel flow in gas-phase inhibition of co-flow diffusion flames. The three PCCs studied behave similarly with regard to flame inhibition, lowering radical concentrations and the heat-release rate at the flame-stabilizing peak reactivity spot (i.e., reaction kernel) in the base, promoting flame blow-off. The three compounds behave differently, however, with regard to the trailing flame. While all three raise the maximum temperature in the trailing flame, DMMP and TMP, which contain three methyl groups, result in higher maximum flame temperature and combustion enhancement there, with a unique two-zone flame structure, whereas phosphoric acid does not.
RESUMO
This study assessed HIV attitudes among pregnant women attending antenatal clinics in the Namakkal district of Tamilnadu, India, as well as HIV knowledge before and after group counseling sessions. Two hundred thirteen women (97%) attending five antenatal clinics in July 2004 accepted HIV counseling and testing and completed precounseling and postcounseling questionnaires. Although the majority of women had heard of HIV, precounseling knowledge was low (mean precounseling score; 6.9/18, SD: 4.53), with scores correlating with the women's educational level and the number of sources from which they had received information about HIV. Posttest scores increased by 21%, however, understanding of modalities to prevent HIV infection remained poor. Group counseling sessions achieve small gains in HIV knowledge, but there is a continued need for ongoing and multifaceted HIV education in rural India.
Assuntos
Sorodiagnóstico da AIDS , Aconselhamento , Infecções por HIV/psicologia , Conhecimentos, Atitudes e Prática em Saúde , Cuidado Pré-Natal , Atitude Frente a Saúde , Feminino , Infecções por HIV/epidemiologia , Infecções por HIV/transmissão , Humanos , Índia/epidemiologia , Gravidez , Avaliação de Programas e Projetos de Saúde , População Rural , Programas VoluntáriosRESUMO
Healthy men (n = 42) and women (n = 45) who were right-handed and men (n = 21) and women (n = 20) who were left-handed were studied. Men's mean age was 21.1 +/- 3.5 yr. and women's 20.7 +/- 3.1 yr. These students in various faculties reported they were right- or left-handed. Then their hand and foot preferences (handedness and footedness) were ascertained by asking each of the subjects to perform 11 tasks for handedness and 9 tasks for footedness. A discriminate function analysis test showed that each of the 11 tasks used for assessing their self-reported handedness was significant, but, of the 9 tasks used for assessing self-reported footedness, only 7 were significant. Strength of the hand or foot played no role in reports of handedness or footedness. A combination of four tasks, such as pulling a door, pushing a door, holding an object, and hammering a nail, on which the maximum number of subjects performed with the right or left hand, depending upon their self-reported handedness, would be ideal for ascertaining handedness. A combination of three tasks, namely, kicking a football, pushing an object with the foot, and stamping on the ground, would be ideal for ascertaining footedness.
Assuntos
Pé/fisiologia , Lateralidade Funcional , Mãos/fisiologia , Desempenho Psicomotor , Inquéritos e Questionários , Adulto , Feminino , Humanos , Masculino , Reprodutibilidade dos TestesRESUMO
Taxanes (docetaxel and paclitaxel) are among the most commonly prescribed anticancer drugs approved for the treatment of metastatic or locally advanced breast, non-small cell lung, prostate, gastric, head and neck, and ovarian cancers, as well as in the adjuvant setting for operable node-positive breast cancers. Although the true incidence of dermatological adverse events (AEs) in patients receiving taxanes is not known, and has never been prospectively analysed, they clearly represent one of the major AEs associated with these agents. With an increase in the occurrence of cutaneous AEs during treatment with novel targeted and immunological therapies when used in combination with taxanes, a thorough understanding of reactions attributable to this class is imperative. Moreover, identification and management of dermatological AEs is critical for maintaining the quality of life in cancer patients and for minimizing dose modifications of their antineoplastic regimen. This analysis represents a systematic review of the dermatological conditions reported with the use of these drugs, complemented by experience at comprehensive cancer centres. The conditions reported herein include skin, hair, and nail toxicities. Lastly, we describe the dermatological data available for the new, recently FDA-and EMA- approved, solvent-free nab-paclitaxel.