Continuous countercurrent chromatographic twin-column purification of oligonucleotides: The role of the displacement effect.

Oligonucleotides (ONs) are breaking through in the biopharmaceutical industry as a promising class of biotherapeutics. The main success of these molecules is due to their peculiar way of acting in the cellular process, regulating the gene expression and hence influencing the protein synthesis at a pretranslational level. Although the Food and Drug Administration (FDA) already approved a few ON-based therapeutics, their production cost strongly limits large-scale manufacturing: a situation that can be alleviated through process intensification. In this study, we address this problem by developing an efficient and continuous chromatographic purification process for ONs. In particular, we considered the chromatographic purification of an ON crude prepared by chemical synthesis using anion exchange resins. We demonstrate that in this system the competitive adsorption of the various species on the same sites of the resin leads to the displacement of the more weakly adsorbing species by the more strongly adsorbing ones. This phenomenon affects the behavior of the chromatographic units and it has been investigated in detail. Then, we developed a continuous countercurrent solvent gradient purification (MCSGP) process, which can significantly improve the productivity and buffer consumption compared to a classical single-column, batch chromatographic process.

Analysis and optimal design of batch and two-column continuous chromatographic frontal processes for monoclonal antibody purification.

The increasing demand for efficient and robust processes in the purification of monoclonal antibodies (mAbs) has recently brought frontal chromatography to the forefront. Applied during the polishing step, it enables the removal of high molecular weight aggregates from the target product, achieving high purities. Typically, this process is operated in batch using a single column, which makes it intrinsically subjected to a purity-yield tradeoff. This means that high purities can only be achieved at the cost of lowering the product yield and vice versa. Recently, a two-column continuous implementation of frontal chromatography, referred to as Flow2, was developed. Despite being able of alleviating the purity-yield tradeoff typical of batch operations, the increase in the number of process parameters complicates its optimal design, with the risk of not exploiting its full potential. In this study, we developed an ad hoc design procedure (DP) suitable for the optimization of both batch frontal chromatography and Flow2 in terms of purity, yield, and productivity. This procedure provided similar results as a multiobjective optimization based on genetic algorithm but with lower computational effort. Then, batch and Flow2 operated at their optimal conditions were compared. Besides showing a more favorable Pareto front of yield and productivity at a specified purity, the Flow2 process demonstrated improved robustness compared to the batch process with respect to modifications in the loading linear velocity, washing buffer ionic strength and loading time, thus providing an appealing operation for integrated processes.

Process intensification by frontal chromatography: Performance comparison of resin and membrane adsorber for monovalent antibody aggregate removal.

Aggregates are amongst the most important product-related impurities to be removed during the downstream processing of antibodies due to their potential immunogenicity. Traditional operations use cation-exchange resins in bind-elute mode for their separation. However, frontal analysis is emerging as an alternative. In this study, a three-step process development for a membrane adsorber and a resin material is carried out, allowing the comparison between the stationary phases. Based on a screening study, optimal loading conditions are determined, which show that weak binding is favored on the membrane and strong binding on the resin. Transfer of these findings to breakthrough experiments shows that at 99% pool purity the yield is higher for the membrane, while the resin can be loaded twice as high, exceeding yields of 85%. For the investigated antibody and based on a given regeneration protocol, the productivity of the two phases is similar, ranging around 200 g/(L·h). Due to the higher loading, the resin requires about one-third less buffer than the membrane. Furthermore, the implementation of a wash step after loading allows to further increase yield by about 5%. In comparison to a generic bind-elute process, productivity and buffer consumption are improved by an order of magnitude.

Process-wide control and automation of an integrated continuous manufacturing platform for antibodies.

Integrated continuous manufacturing is entering the biopharmaceutical industry. The main drivers range from improved economics, manufacturing flexibility, and more consistent product quality. However, studies on fully integrated production platforms have been limited due to the higher degree of system complexity, limited process information, disturbance, and drift sensitivity, as well as difficulties in digital process integration. In this study, we present an automated end-to-end integrated process consisting of a perfusion bioreactor, CaptureSMB, virus inactivation (VI), and two polishing steps to produce an antibody from an instable cell line. A supervisory control and data acquisition (SCADA) system was developed, which digitally integrates unit operations and analyzers, collects and centrally stores all process data, and allows process-wide monitoring and control. The integrated system consisting of bioreactor and capture step was operated initially for 4 days, after which the full end-to-end integrated run with no interruption lasted for 10 days. In response to decreasing cell-specific productivity, the supervisory control adjusted the loading duration of the capture step to obtain high capacity utilization without yield loss and constant antibody quantity for subsequent operations. Moreover, the SCADA system coordinated VI neutralization and discharge to enable constant loading conditions on the polishing unit. Lastly, the polishing was sufficiently robust to cope with significantly increased aggregate levels induced on purpose during virus inactivation. It is demonstrated that despite significant process disturbances and drifts, a robust process design and the supervisory control enabled constant (optimum) process performance and consistent product quality.

Understanding mAb aggregation during low pH viral inactivation and subsequent neutralization.

Monoclonal antibodies (mAbs) and related recombinant proteins continue to gain importance in the treatment of a great variety of diseases. Despite significant advances, their manufacturing can still present challenges owing to their molecular complexity and stringent regulations with respect to product purity, stability, safety, and so forth. In this context, protein aggregates are of particular concern due to their immunogenic potential. During manufacturing, mAbs routinely undergo acidic treatment to inactivate viral contamination, which can lead to their aggregation and thereby to product loss. To better understand the underlying mechanism so as to propose strategies to mitigate the issue, we systematically investigated the denaturation and aggregation of two mAbs at low pH as well as after neutralization. We observed that at low pH and low ionic strength, mAb surface hydrophobicity increased whereas molecular size remained constant. After neutralization of acidic mAb solutions, the fraction of monomeric mAb started to decrease accompanied by an increase on average mAb size. This indicates that electrostatic repulsion prevents denatured mAb molecules from aggregation under acidic pH and low ionic strength, whereas neutralization reduces this repulsion and coagulation initiates. Limiting denaturation at low pH by d-sorbitol addition or temperature reduction effectively improved monomer recovery after neutralization. Our findings might be used to develop innovative viral inactivation procedures during mAb manufacturing that result in higher product yields.

Application of metabolic controls for the maximization of lipid production in semicontinuous fermentation.

Acetic acid can be generated through syngas fermentation, lignocellulosic biomass degradation, and organic waste anaerobic digestion. Microbial conversion of acetate into triacylglycerols for biofuel production has many advantages, including low-cost or even negative-cost feedstock and environmental benefits. The main issue stems from the dilute nature of acetate produced in such systems, which is costly to be processed on an industrial scale. To tackle this problem, we established an efficient bioprocess for converting dilute acetate into lipids, using the oleaginous yeast Yarrowia lipolytica in a semicontinuous system. The implemented design used low-strength acetic acid in both salt and acid forms as carbon substrate and a cross-filtration module for cell recycling. Feed controls for acetic acid and nitrogen based on metabolic models and online measurement of the respiratory quotient were used. The optimized process was able to sustain high-density cell culture using acetic acid of only 3% and achieved a lipid titer, yield, and productivity of 115 g/L, 0.16 g/g, and 0.8 g⋅L-1⋅h-1, respectively. No carbon substrate was detected in the effluent stream, indicating complete utilization of acetate. These results represent a more than twofold increase in lipid production metrics compared with the current best-performing results using concentrated acetic acid as carbon feed.

Integrated multidimensional chromatography on preparative scale for oligonucleotides purification.

Therapeutic oligonucleotides represent a recent breakthrough in the pharmaceutical industry due to their ability to regulate gene expression with great specificity. This aspect allows treatment of a wide range of diseases. However, since oligonucleotides are used for therapeutic purposes, the Active Pharmaceutical Ingredient (API) must fulfill strict purity levels which require intensive purification steps. For oligonucleotides, and biomolecules in general, preparative liquid chromatography is the technique of choice to perform large scale purifications, typically in batch mode, i.e. using a single column. Specifically, since ONs are mainly large, hydrophilic and charged molecules, Anion Exchange chromatography (AEX) and Ion Pair Reversed Phase chromatography (IP-RP) are the preferred chromatographic modes for their downstream processing. Nevertheless, these approaches suffer from a purity-yield trade-off, and for this reason, more than one purification step is usually required. The two chromatographic modes can therefore be used consequently to remove different groups of impurities, thanks to their orthogonality. In this work, a multidimensional and orthogonal approach on a (semi)preparative scale, namely "Integrated Batch process", was applied for the purification of a single-stranded DNA oligonucleotide. This process combines two chromatographic steps without any hold step, operator intervention or sampling of the first step. The performance parameters of the Integrated Batch were compared to those obtained in the single batch runs under different experimental conditions (chromatographic mode, eluent systems), showing the potential of this integrated approach. This proof-of-concept study illustrates how this technique can considerably reduce overall production time and how it allows to increase the robustness and reproducibility of the method, since the process is highly automated.

Design space and robustness analysis of batch and counter-current frontal chromatography processes for the removal of antibody aggregates.

Increasing molecular diversity and market competition requires biopharmaceutical manufacturers to intensify their processes. In this respect, frontal chromatography on cation exchange resins has shown its potential to effectively remove aggregates. However, yield losses during the wash step need to be accepted in order to ensure robust product quality. In this work, we present a novel counter-current frontal chromatography process called Flow2, which uses inline dilution during an interconnected wash phase to allow high monomer recovery without contaminating the product pool with impurities. Its model-based design spaces under purity and yield constraints are compared with those corresponding to traditional batch processes in terms of size and process attributes yield and productivity. The Flow2 process shows the largest extent of feasible operating points independent of feed conditions. Thereby, it allows the implementation of higher ionic strength wash, thus widening the range of operating conditions resulting in yields above 95% compared to batch processes. Productivities of batch and counter-current processes are the same at short regeneration times and equal residence time. However, long regeneration times, while influencing the size of the Flow2 design space, are not detrimental for its productivity resulting in twice as high values as obtained for the batch process. Furthermore, process robustness is evaluated by the ability of the process to maintain the required product quality when subjected to process parameter perturbations. It is found that the Flow2 process is able to retain a larger design space associated also with higher yields showing its ability to improve process attributes without sacrificing robustness at the same time.

From batch to continuous chromatographic purification of a therapeutic peptide through multicolumn countercurrent solvent gradient purification.

A twin-column Multicolumn Countercurrent Solvent Gradient Purification (MCSGP) process has been developed for the purification of a therapeutic peptide, glucagon, from a crude synthetic mixture. This semi-continuous process uses two identical columns operating either in interconnected or in batch mode, thus enabling the internal recycle of the portions of the eluting stream which do not comply with purity specifications. Because of this feature, which actually results in the simulated countercurrent movement of the stationary phase with respect to the mobile one, the yield-purity trade-off typical of traditional batch preparative chromatography can be alleviated. Moreover, the purification process can be completely automatized. Aim of this work is to present a simple procedure for the development of the MCSGP process based on a single batch experiment, in the case of a therapeutic peptide of industrial relevance. This allowed to recover roughly 90% of the injected glucagon in a purified pool with a purity of about 90%. A comparison between the performance of the MCSGP process and the classical single column batch process indicates that percentage increase in the recovery of target product is +23% when transferring the method from batch conditions to MCSGP, with an unchanged purity of around 89%. This improvement comes at the expenses of a reduction of about 38% in productivity.

Model based strategies towards protein A resin lifetime optimization and supervision.

The high cost of protein A resins drives the biopharmaceutical industry to maximize its lifetime, which is limited by several processes, usually referred to as resin aging. In this work, two model based strategies are presented, aiming to control and improve the resin lifetime. The first approach, purely statistical, enables qualitative monitoring of the column state and prediction of column performance indicators (e.g. yield, purity and dynamic binding capacity) from chromatographic on-line data (e.g. UV signal). The second one, referred to as hybrid modeling, is based on a lumped kinetic model, which includes two aging parameters fitted on several resin cycling experimental campaigns with varying cleaning procedures (CP). The first aging parameter accounts for binding capacity deterioration (caused by ligand degradation, leaching, and pore occlusion), while the second accounts for a decreased mass transfer rate (mainly caused by fouling). The hybrid model provides important insights into the prevailing aging mechanism as a function of the different CPs. In addition, it can be applied to model based CP optimization and yield forecasting with the capability of state estimation corrections based on on-line process information. Both approaches show promising results, which could help to significantly extend the resin lifetime. This comes along with increased understanding, reduced experimental effort, decreased cost of goods, and improved process robustness.

Experimental Evaluation of the Impact of Intrinsic Process Parameters on the Performance of a Continuous Chromatographic Polishing Unit (MCSGP).

The semicontinuous twin-column multicolumn countercurrent solvent gradient purification (MCSGP) process improves the trade-off between purity and yield encountered in traditional batch chromatography, while its complexity, in terms of hardware requirements and process design, is reduced in comparison to process variants using more columns. In this study, the MCSGP process is experimentally characterized, specifically with respect to its unique degrees of freedom, i.e., the four switching times, which alternate the columns between interconnected and batch states. By means of isolation of the main charge isoform of an antibody, it is shown that purity is determined by the selection of the product collection window with negligible influence from the recycle phases. In addition, the amount of weak and strong impurities can be specifically attributed to the start and end of the collection, respectively. Due to higher abundance of weakly adsorbing impurities, the start of product collection influences productivity and yield more than the other switching times. Furthermore, most of the encountered tendencies scale between different loadings. The found trends can be rationalized from the corresponding batch chromatogram and therefore used during process design to obtain desirable process performances without extensive trial-and-error experimentation or complete model development and calibration.

Purification of Human Monoclonal Antibodies and Their Fragments.

This chapter summarizes the most common chromatographic mAb and mAb fragment purification methods, starting by elucidating the relevant properties of the compounds and introducing the various chromatography modes that are available and useful for this application. A focus is put on the capture step affinity and ion-exchange chromatography. Aspects of scalability play an important role in judging the suitability of the methods. The chapter introduces also analytical chromatographic methods that can be utilized for quantification and purity control of the product. In the case of mAbs, for most purposes the purity obtained using an affinity capture step is sufficient. Polishing steps are required if material of particularly high purity needs to be generated. For mAb fragments, affinity chromatography is not yet fully established, and the capture step potentially may not provide material of high purity. Therefore, the available polishing techniques are touched upon briefly. In the case of mAb isoform and bispecific antibody purification, countercurrent chromatography techniques have proven to be very useful and a part of this chapter has been dedicated to them, paying tribute to the rising interest in these antibody formats in research and industry.

A new flow cell and chemometric protocol for implementing in-line Raman spectroscopy in chromatography.

On-line monitoring tools for downstream chromatographic processing (DSP) of biotherapeutics can enable fast actions to correct for disturbances in the upstream, gain process understanding, and eventually lead to process optimization. While UV/Vis spectroscopy is mostly assessing the protein's amino acid composition and the application of Fourier transform infrared spectroscopy is limited due to strong water interactions, Raman spectroscopy is able to assess the secondary and tertiary protein structure without significant water interactions. The aim of this work is to implement the Raman technology in DSP, by designing an in-line flow cell with a reduced dead volume of 80 µL and a reflector to increase the signal intensity as well as developing a chemometric modeling path. In this context, measurement settings were adjusted and spectra were taken from different chromatographic breakthrough curves of IgG1 in harvest. The resulting models show a small average RMSEP of 0.12 mg/mL, on a broad calibration range from 0 to 2.82 mg/mL IgG1. This work highlights the benefits of model assisted Raman spectroscopy in chromatography with complex backgrounds, lays the fundamentals for in-line monitoring of IgG1, and enables advanced control strategies. Moreover, the approach might be extended to further critical quality attributes like aggregates or could be transferred to other process steps.

Continuous and Integrated Expression and Purification of Recombinant Antibodies.

This chapter introduces the necessary concepts to design continuous expression and purification processes for monoclonal antibodies. The operation of a perfusion bioreactor is discussed containing the preparation procedures, the seeding train and the preparation and control of a long-term production run. The downstream processes exploit the benefits of countercurrent chromatography. Their design from batch experiments is presented. The CaptureSMB process is introduced for continuous capturing while for polishing applications the design of the two-column MCSGP process is described. The chapter also puts these processes together in the context of their integration to an end-to-end production process.

Proteomic analysis of micro-scale bioreactors as scale-down model for a mAb producing CHO industrial fed-batch platform.

The pharmaceutical production of recombinant proteins, such as monoclonal antibodies, is rather complex and requires proper development work. Accordingly, it is essential to develop appropriate scale-down models, which can mimic the corresponding production scale. In this work, we investigated the impact of the bioreactor scale on intracellular micro-heterogeneities of a CHO cell line producing monoclonal antibodies in fed-batch mode, using a 10 mL micro-bioreactor (ambr™) scale-down model and the corresponding 300 L pilot-scale bioreactor. For each scale, we measured the time evolution of the proteome, which enabled us to compare the impact of the bioreactor scale on the intracellular processes. Nearly absolute accordance between the scales was verified by data mining methods, such as hierarchical clustering and in-detail analysis on a single protein base. The time response of principal enzymes related to N-glycosylation was discussed, emphasizing major dissimilarities between the glycan fractions adorning the heavy chain and the corresponding protein abundance. The enzyme expression displayed mainly a constant profile, whereas the resulting glycan pattern changed over time. It is concluded that the enzymatic activity is influenced by the changing environmental conditions present in the fed-batch processes leading to the observed time-dependent variation.