Effectively Enhancing the Conductance of Asymmetric Molecular Wires by Aligning the Energy Level and Symmetrizing the Coupling.

An asymmetric structure is an important strategy for designing highly conductive molecular wires for a gap-fixed molecular circuit. As the conductance enhancement in the current strategy is still limited to about 2 times, we inserted a methylene group as a spacer in a conjugated structure to modulate the structural symmetry. We found that the conductance drastically enhanced in the asymmetric molecular wire to 1.5 orders of magnitude as high as that in the symmetric molecular wire. First-principles quantum transport studies attributed the effective enhancement to the synchronization of improved energy alignment and nearly symmetric coupling between the frontier orbitals and the electrodes.

Exploring a Linear Combination Feature for Predicting the Conductance of Parallel Molecular Circuits.

An accurate rule for predicting conductance is the cornerstone of developing molecular circuits and provides a promising solution for miniaturizing electric circuits. The successful prediction of series molecular circuits has proven the possibility of establishing a rule for molecular circuits under quantum mechanics. However, the quantitatively accurate prediction has not been validated by experiments for parallel molecular circuits. Here we used 1,3-dihydrobenzothiophene (DBT) to build the parallel molecular circuits. The theoretical simulation and single-molecule conductance measurements demonstrated that the conductance of the molecule containing one DBT is the unprecedented linear combination of the conductance of the two individual channels with respective contribution weights of 0.37 and 0.63. With these weights, the conductance of the molecule containing two DBTs is predicted as 1.81 nS, matching perfectly with the measured conductance (1.82 nS). This feature offers a potential rule for quantitatively predicting the conductance of parallel molecular circuits.

Effect of different surgical techniques on postoperative wound infection in patients with uterine prolapse: A meta-analysis.

The assumption is that a number of controlled trials have been conducted to assess the impact of uterus retaining or hysterectomy on wound and haemorrhage, but there is no indication as to which method would be more beneficial for wound healing. This research is intended to provide a comprehensive overview of the availability of wound healing in case studies of both operative methods. From inception to October 2023, four databases were reviewed. The odds ratio (OR) and the mean difference (MD) for both groups were computed with a random effect model, as well as the corresponding 95% confidence intervals. A total of five studies were carried out in the overall design and enrolled 16 972 patients. No statistical significance was found in the rate of postoperative wound infection among the two treatments (OR,1.46; 95% CI,0.66,3.22 p = 0.35); The rates of bleeding after surgery did not differ significantly from one procedure to another (OR,1.41; 95% CI,0.91,2.17 p = 0.12); two studies demonstrated no statistical significance for the rate of incisional hernia after surgery (OR,2.58; 95% CI,0.37,18.05 p = 0.34). Our findings indicate that there is a similar risk between uterine preservation and hysterectomies for the incidence of wound infection, haemorrhage and protrusion of incision.

Attaining Exceptional Stable Copper(I) Metallacyclopentadiene Diradicaloids through Ligand Engineering.

Diradicaloids are generally high-energy molecules with open-shell configuration and are quite reactive. In this work, we report a feasible synthetic approach to attaining exceptionally stable copper(I) metallacyclopentadiene diradicaloids through ligand engineering. Copper(I)-hybrid cyclopentadiene diradicaloids 1c-6c that absorb intensely in visible regions were successfully prepared in stoichiometrical yields under UV light irradiation. The diradicaloids originate from the C-C bonding coupling of two side-by-side-arranged ethynyl groups in complexes 1-6 upon photocyclization. By rational selection of substituents in triphosphine ligands, we systematically modulate the kinetic behavior of diradicaloids 1c-6c in the thermal decoloration process. With precise ligand design, we are able to obtain exceptionally stable copper(I)-hybrid cyclopentadiene diradicaloids with a half-life as long as ca. 40 h in CH2Cl2 solution at ambient temperature. As demonstrated by electron paramagnetic resonance (EPR) and variable-temperature magnetic studies, the diradicaloids manifest a singlet ground state, but they are readily populated to a triplet excited state through thermal activation in view of a small singlet-triplet energy gap of -0.39 kcal mol-1. The diradicaloids show two-step quasi-reversible reduction waves at about -0.5 and -1.0 V ascribed to successive one-electron-accepting processes, coinciding perfectly with the characteristics of diradicals.

Scissor-like Au4Cu2 Cluster with Phosphorescent Mechanochromism and Thermochromism.

Reaction of [Au(tht)2](ClO4) (tht = tetrahydrothiophene), [Cu(CH3CN)4](ClO4), 3,6-di-tert-butyl-1,8-diethynyl-9H-carbazole (H3decz), and bis(2-diphenylphosphinophenyl)ether (POP) in the presence of triethylamine (NEt3) gave the cluster complex Au4Cu2(decz)2(POP)2 as yellow crystals. As revealed by X-ray crystallography, the Au4Cu2 cluster exhibits scissor-like structure sustained by two decz and two POP ligands and stabilized by Au-Cu and Au-Au interactions. The Au4Cu2 cluster shows bright yellow to orange photoluminescence upon irradiation at >300 nm, arising from 3[π (decz)→5d (Au)] 3LMCT (ligand-to-metal charge transfer) and 3[π→π* (decz)] 3IL (intraligand) triplet states as revealed by theoretical and computational studies. When it is mechanically ground, reversible phosphorescence conversion from yellow to red is observed owing to more compact molecular packing and thus stronger intermetallic interaction. Variable-temperature luminescence studies reveal that it displays distinct red-shifts of the emission whether the temperature is elevated or lowered from ambient temperature, suggestive of exceptional thermochromic phosphorescence characteristics.

A Mechanochromic and Vapochromic Luminescent Cuprous Complex Based on a Switchable Intramolecular π···π Interaction.

An in-depth study on a stimuli-responsive tetranuclear cuprous luminescent complex is reported and gives new insights into the origin and possible use of the observed stimuli-responsive luminescence. Its crystalline polymorphs with two different shapes are obtained by using different crystallization solvents and show distinct emissions, with one being blue emissive and the other being yellow emissive. Upon grinding, only the blue-emitting polymorph has a marked change in the emission color from blue to yellow, and its ground sample exhibits a yellow emission similar to that of the yellow-emitting polymorph. Interestingly, the yellow-emitting polymorph after exposure to acetone vapor can emit a blue emission and display luminescence mechanochromism similar to that of the blue-emitting polymorph. Single-crystal structural analyses of the two different polymorphs reveal the relationship between the mechanochromic luminescence and the geometrical configuration of the {Cu(µ-dppm)2Cu} unit and intramolecular "pyridyl/phenyl" π···π interactions, supported as well by their PXRD, FT-IR, TGA, and PL studies in various states and by TD-DFT analyses. The results demonstrate the different roles of switchable intramolecular π···π interactions and the geometrical configuration of the {Cu(µ-dppm)2Cu} unit in this stimuli-responsive luminescence and potential applications of such stimuli-responsive luminescence in optical sensing and anticounterfeiting encryption technologies and deepen the understanding of such stimuli-responsive luminescence originating from switchable intramolecular π···π interactions. In addition, it is clearly suggested that the rational utilization of switchable intramolecular π···π interactions is a feasible route for developing stimuli-responsive intelligent luminescent materials and devices.

Capturing the Rotation of One Molecular Crank by Single-Molecule Conductance.

Unveiling the internal dynamics of rotation in molecular machine at single-molecule scale is still a challenge. In this work, three crank-shaped molecules are elaborately designed with the conformational flipping between syn and anti fulfilled by two naphthyl groups rotating freely along 1,3-butadiynyl axis. By investigating the single-molecule conductance using scanning tunnelling microscope break junction (STM-BJ) technique and theoretical simulation, the internal rotation of these crank-shaped molecules is well identified through low and high conductance corresponding to syn- and anti-conformations. As demonstrated by theoretically computational study, the orbital energy changes with the conformational flipping and influences the intraorbital quantum interference, thus eventually modulating the single-molecule conductance. This work demonstrates single-molecule conductance measurement to be a rational approach for characterizing the internal rotation of molecular machines.

Heteroctanuclear Au4Ag4 Cluster Complexes of 4,5-Diethynylacridin-9-One with Luminescent Mechanochromism.

Two heteroctanuclear Au4Ag4 cluster complexes of 4,5-diethynylacridin-9-one (H2L) were prepared through the self-assembly reactions of [Au(tht)2](CF3SO3), Ag(tht)(CF3SO3), H2L and PPh3 or PPh2Py (2-(diphenylphosphino)pyridine). The Au4Ag4 cluster consists of a [Au4L4]4- and four [Ag(PPh3)]+ or [Ag(PPh2Py)]+ units with Au4L4 framework exhibiting a twisted paper clip structure. In CH2Cl2 solutions at ambient temperature, both compounds show ligand fluorescence at ca. 463 nm as well as phosphorescence at 650 nm for 1 and 630 nm for 2 resulting from admixture of 3IL (intraligand) of L ligand, 3LMCT (from L ligand to Au4Ag4) and 3MC (metal-cluster) triplet states. Crystals or crystalline powders manifest bright yellow-green phosphorescence with vibronic-structured emission bands at 530 (568sh) nm for complex 1 and 536 (576sh) nm for complex 2. Upon mechanical grinding, yellow-green emission in the crystalline state is dramatically converted to red luminescence centered at ca. 610 nm with a drastic redshift of the emission after crystal packing is destroyed.

Highly Efficient Light-Emitting Diodes Based on an Organic Antimony(III) Halide Hybrid.

As low-dimensional lead-free hybrids with higher stability and lower toxicity than those of three-dimensional lead perovskites, organic antimony(III) halides show great application potential in opt-electronic field owing to diverse topologies along with exceptional optical properties. We report herein an antimony(III) hybrid (MePPh3 )2 SbCl5 with a zero-dimensional (0D) structure, which exhibits brilliant orange emission peaked at 593 nm with near-unity photoluminescent quantum yield (99.4 %). The characterization of photophysical properties demonstrates that the broadband emission with a microsecond lifetime (3.24 µs) arises from self-trapped emission (STE). Electrically driven organic light-emitting diodes (OLEDs) based on neat and doped films of (MePPh3 )2 SbCl5 were fabricated. The doped devices show significant improvement in comparison to non-doped OLEDs. Owing to the much improved surface morphology and balanced carrier transport in light-emitting layers of doped devices, the peak luminance, current efficiency (CE) and external quantum efficiency (EQE) are boosted from 82 cd m-2 to 3500 cd m-2 , 1.1 cd A-1 to 6.8 cd A-1 , and 0.7 % to 3.1 % relative to non-doped devices, respectively.

Prediction of Crop Yield Using Phenological Information Extracted from Remote Sensing Vegetation Index.

Phenology is an indicator of crop growth conditions, and is correlated with crop yields. In this study, a phenological approach based on a remote sensing vegetation index was explored to predict the yield in 314 counties within the US Corn Belt, divided into semi-arid and non-semi-arid regions. The Moderate Resolution Imaging Spectroradiometer (MODIS) data product MOD09Q1 was used to calculate the normalized difference vegetation index (NDVI) time series. According to the NDVI time series, we divided the corn growing season into four growth phases, calculated phenological information metrics (duration and rate) for each growth phase, and obtained the maximum correlation NDVI (Max-R2). Duration and rate represent crop growth days and rate, respectively. Max-R2 is the NDVI value with the most significant correlation with corn yield in the NDVI time series. We built three groups of yield regression models, including univariate models using phenological metrics and Max-R2, and multivariate models using phenological metrics, and multivariate models using phenological metrics combined with Max-R2 in the whole, semi-arid, and non-semi-arid regions, respectively, and compared the performance of these models. The results show that most phenological metrics had a statistically significant (p < 0.05) relationship with corn yield (maximum R2 = 0.44). Models established with phenological metrics realized yield prediction before harvest in the three regions with R2 = 0.64, 0.67, and 0.72. Compared with the univariate Max-R2 models, the accuracy of models built with Max-R2 and phenology metrics improved. Thus, the phenology metrics obtained from MODIS-NDVI accurately reflect the corn characteristics and can be used for large-scale yield prediction. Overall, this study showed that phenology metrics derived from remote sensing vegetation indexes could be used as crop yield prediction variables and provide a reference for data organization and yield prediction with physical crop significance.

High-Performance Ladder-Type Heteroheptacene-Based Nonfullerene Acceptors Enabled by Asymmetric Cores with Enhanced Noncovalent Intramolecular Interactions.

Nonfullerene acceptors (MQ3, MQ5, MQ6) are synthesized using asymmetric and symmetric ladder-type heteroheptacene cores with selenophene heterocycles. Although MQ3 and MQ5 are constructed with the same number of selenophene heterocycles, the heteroheptacene core of MQ5 is end-capped with selenophene rings while that of MQ3 is flanked with thiophene rings. With the enhanced noncovalent interaction of O⋅⋅⋅Se compared to that of O⋅⋅⋅S, MQ5 shows a bathochromically shifted absorption band and greatly improved carrier transport, leading to a higher power conversion efficiency (PCE) of 15.64 % compared to MQ3, which shows a PCE of 13.51 %. Based on the asymmetric heteroheptacene core, MQ6 shows an improved carrier transport induced by the reduced π-π stacking distance, related with the increased dipole moment in comparison with the nonfullerene acceptors based on symmetric cores. MQ6 exhibits a PCE of 16.39 % with a VOC of 0.88 V, a FF of 75.66 %, and a JSC of 24.62 mA cm-2 .

Vapor-triggered Green-to-Yellow Luminescence Conversion due to the Variation of Ligand Orientations in Tetranuclear Copper(I) Complex.

The reaction of 3,6-ditert-butyl-1,8-bis(diphenylphosphino)-9-methyl-9H-carbazole (L) with CuBr resulted in the isolation of tetranuclear copper(I) complex Cu4Br4L2 as two colorless crystal morphs, i.e., green-emitting 1G and yellow-emitting 1Y. As demonstrated by X-ray crystallography, the Cu4Br4 moiety in both 1G and 1Y adopts the same chair conformations. When L is bonded perpendicularly to the Cu4 plane, 1G with green emission is obtained, while it gives a yellow emission of 1Y once the L is parallelly bonded to Cu4 plane. Theoretical computational studies suggest that the variation in ligand orientation results in a different degree of structural distortion in triplet state and thus different luminescent energy. Particularly, 1Y undergoes dramatic structural distortion from the ground (S0) to triplet excied state (T1). Interestingly, 1G can be converted into 1Y upon exposed to saturated hexane vapor, which would return to 1G upon exposure to acetonitrile vapor. As demonstrated experimentally and theoretically, the reversible luminescence transformation between 1G and 1Y is ascribed to the variation of ligand L orientations.

Reversible Mechanochromic Luminescence of Tetranuclear Cuprous Complexes.

Mechanochromic luminescence materials have attracted rapidly growing interest. Nevertheless, the designed synthesis of such materials remains a challenge, and there have been few examples based on weak intramolecular interactions. Herein, we report a new approach for preparing mechanochromic luminescence materials of Cu(I) complexes, i.e., constructing a photoluminescence system that bears a large coplanar multinuclear Cu(I) unit showing weak intramolecular π···π interactions with the planar rings of the coordinated ligands in the molecule. Using it, a series of novel mechanochromic luminescent tetranuclear Cu(I) complexes have been successfully designed and synthesized. As revealed by single-crystal X-ray crystallography, these Cu(I) complexes share an identical {Cu4[µ3-η2(N,N),η1(N),η1(N)-pyridyltetrazole]2}2+ planar fragment whose coplanar pyridyl rings exhibit weak intramolecular π···π interactions with the phenyl rings of the coordinated phosphine ligands in the molecule. All of these Cu(I) complexes exhibit reversible mechanochromic luminescence, which can be attributed to the change in the rigidity of the molecular structure resulting from the disruption and restoration of intramolecular π···π interactions between the pyridyl and phenyl rings triggered by grinding and CH2Cl2 vapor, as supported by powder X-ray diffraction and Fourier transform infrared spectrometry. In addition, the results might provide a new route for developing mechanochromic luminescence materials of Cu(I) complexes for intelligent responsive luminescent devices.

Ladder-Type Heteroheptacenes with Different Heterocycles for Nonfullerene Acceptors.

The design, synthesis, and characterization of two novel nonfullerene acceptors (M8 and M34) based on ladder-type heteroheptacenes with different heterocycles are reported. Replacing the furan heterocycles with the thiophene heterocycles in the heteroheptacene backbone leads to a hypsochromically shifted absorption band and greatly improved carrier transport for the resulting nonfullerene acceptor (M34) although the π-π-stacking distances are barely affected. Bulk-heterojunction polymer solar cells fabricated from M34 and a wide band gap polymer (PM6) as the donor showed a best power conversion efficiency (PCE) of 15.24 % with an open circuit voltage (VOC ) of 0.91 V, much higher than a PCE of 4.21 % and a VOC of 0.83 V for the counterparts based on M8:PM6. These results highlight the importance of key atoms in the construction of high-performance nonfullerene acceptors.

A Sublimable Dinuclear Cuprous Complex Showing Selective Luminescence Vapochromism in the Crystalline State.

A new sublimable dicopper(I) complex bearing 1,2-bis(diphenylphosphino)ethane and 5-trifluoromethyl-3-(2'-pyridyl)pyrazolate ligands has been designed and synthesized, and its crystalline solvated and nonsolvated compounds have also been obtained and investigated. It is shown that only the crystalline solvated compound exhibits reversible and selective luminescence vapochromism, arising from its unique "pyridyl/CH2Cl2/pyridyl" organic sandwich-like stacking arrangement revealed by X-ray crystallography, as supported by time-dependent density functional theory calculations. Additionally, the neutral Cu(I) complex has excellent thermal stability and sublimability, good solid-state luminescence properties, and TADF character, and it is suggested to be a good emitter for vapor-deposited organic light-emitting diodes.

Ultrasound-Responsive Nanoparticulate for Selective Amplification of Chemotherapeutic Potency for Ablation of Solid Tumors.

Precision medicine requests preferential transportation of the pharmaceutical substances to the pathological site and impartation of localized therapeutic activities to the targeted cells. To accomplish this goal, we attempted a facile nanoscaled ultrasound-responsive delivery system, characterized by doxorubicin assembled with an amphiphilic copolymer (multiple of hydrophobic stearic segments tethered onto the hydrophilic pullulan backbone through ultrasound-labile oxyl-alkylhydroxylamine linkage). As a consequence of the strategically installed ultrasound-labile oxyl-alkylhydroxylamine linkage to elicit the tailored segregation of the hydrophilic pullulan and the hydrophobic stearic segments upon ultrasound impetus, the constructed nanoscaled self-assembly presented distinctive structural destabilization behaviors and afforded spatiotemporal controlled liberation of the cytotoxic drugs. It is worthy to note that the ultrasound was determined to markedly lower the IC50 of the proposed system from over 10 µg/mL to 2.33 µg/mL (approximate 4-fold), thereby serving as a facile impetus to amplify the cytotoxic potency of the proposed drug delivery vehicles. Furthermore, drastic tumor ablation was validated by dosage of the proposed doxorubicin delivery system to T41 tumor-bearing mice accompanied by the tumor-localized ultrasound impetus, while no observable adverse side effect was confirmed. Therefore, the results advocated our ultrasound-responsive delivery vehicle as a tempting strategy for precise spatiotemporal control of the release of the drug cargo, thus affording selectively amplified cytotoxic potency to the ultrasound-imposed site, which should be highlighted as important progress toward precision medicine.

Luminescent Mechanochromic Dinuclear Cu(I) Complexes with Macrocyclic Diamine-Tetracarbene Ligands.

Dinuclear Cu(I) complexes bearing hexadentate, macrocyclic N-heterocyclic carbene (NHC) ligands, [Cu2(L1)(CH3CN)][PF6]2 (1) and [Cu2(L2)(CH3CN)]2[Cu2(L2)(CH3CN)2][PF6]6 (2), have been synthesized by the reactions of [H4L][PF6]4 (L = L1, L2) with excess Cu2O in acetonitrile. Crystallizations of the heat-treated samples of 1 and 2 from acetone/methanol/ether or CH3NO2/ether result in [Cu2(L1)][PF6]2 (3) and [Cu2(L2)][PF6]2 (4). Complexes 1-4 are emissive with luminescent maxima at 464, 472, 540, and 488 nm in the solid state, respectively. The origin of the red shift of the emission maximum of 3 relative to the other three complexes has been studied by theoretical calculations, showing the cuprophilic interactions in the excited state of 3. The mechanochromic luminescent properties of 1-4 have been studied. After grinding in a mortar, a significant emission color change is found with a red shift of 98 nm for 1, 82 nm for 2, 20 nm for 3, and 64 nm for 4, respectively. These mechanochromic transformations are found to be a crystalline-to-amorphous conversion, which can be reverted by adding drops of the organic solvent or recrystallization. The possible correlations between the luminescent properties and structural modifications such as Cu···Cu distances are discussed.

A Water-Stable 3D Luminescent Metal-Organic Framework Based on Heterometallic [EuIII6ZnII] Clusters Showing Highly Sensitive, Selective, and Reversible Detection of Ronidazole.

A water-stable 3D luminescent metal-organic framework (MOF), [Eu6Zn(µ3-OH)8(NDC)6(H2O)6]n (1), constructed from heterometallic [EuIII6ZnII] clusters and electron-rich π-conjugated 1,4-naphthalenedicarboxylic acid (H2NDC) ligands exhibits highly sensitive, selective, and reversible detection of ronidazole, which represents the first example of luminescent MOFs based on Ln-TM heterometallic clusters for the detection of antibiotics in aqueous solution.

Multiphotochromism in an Asymmetric Ruthenium Complex with Two Different Dithienylethenes.

An asymmetric bis(dithienylethene-acetylide) ruthenium(II) complex trans-Ru(dppe)2(L1o)(L2o) (1oo) incorporating two different dithienylethene-acetylides (L1o and L2o) was designed to modulate multistate photochromism in view of the well separated ring-closing absorption bands between L1o and L2o. Upon irradiation with appropriate wavelengths of light, complex 1 undergoes stepwise photocyclization and selective photocycloreversion to afford four states (1oo, 1co, 1oc, and 1cc). As a contrast, symmetric complexes trans-Ru(dppe)2(L1o)2 (2oo) and trans-Ru(dppe)2(L2o)2 (3oo) with two identical dithienylethene-acetylides were synthesized, and the corresponding photochromic behavior was investigated. The photochromic properties of the oxidized species (1oo+/1co+/1oc+/1cc+, 2oo+/2co+/2cc+, and 3oo+/3co+/3cc+) were also investigated. The ring-closing absorption bands of one-electron oxidized species 1oo+, 2oo+, and 3oo+ show obvious blue shifts relative to those of 1oo, 2oo, and 3oo, respectively. The ring-closing absorption bands in both neutral and oxidized species grow progressively following oo → oc/co → cc and oo+ → oc+/co+ → cc+. As revealed by spectroscopic, electrochemical, and computational studies, complex 1 displays eight switchable states through stepwise photocyclization, selective cycloreversion, and a reversible redox process.

Photophysical and Electroluminescent Properties of PtAg2 Acetylide Complexes Supported with meso- and rac-Tetraphosphine.

1,2-Bis[[(diphenylphosphino)methyl](phenyl)phosphino]ethane (dpmppe) was prepared as a new tetraphosphine, and the corresponding rac and meso stereoisomers were successfully separated in view of their solubility difference in acetone. The substitution of PPh3 into Pt(PPh3)2(C≡CR)2 (R = aryl) with rac- or meso-dpmppe gives Pt(rac-dpmppe)(C≡CR)2 or Pt(meso-dpmppe)(C≡CR)2, respectively. Using Pt(rac-dpmppe)(C≡CR)2 or Pt(meso-dpmppe)(C≡CR)2 as a precursor, PtAg2 heterotrinuclear cluster complexes were synthesized and characterized by X-ray crystallography. Depending on the conformations of tetraphosphine, the structures of PtAg2 complexes supported with rac- and meso-dpmppe are quite different. The higher molecular rigidity of rac-dpmppe-supported PtAg2 complexes results in stronger phosphorescent emission than that of PtAg2 species with meso-dpmppe. The high phosphorescent quantum yields (as high as 90.5%) in doping films warrant these PtAg2 complexes as excellent phosphorescent dopants in organic light-emitting diodes (OLEDs). The peak current and external quantum efficiencies in solution-processed OLEDs are 61.0 cd A-1 and 18.1%, respectively. Electroluminescence was elaborately modulated by modifying the substituent in aromatic acetylide and the conformations in tetraphosphine so as to achieve cyan, green, green-yellow, yellow, and orange-red emission.